boot sequence
boot sequence, Total:62 items.
The international standard classification for "boot sequence" includes: Fluorescent lamps. Discharge lamps .
The Chinese standard classification for "boot sequence" includes: Lamp accessories .
Group Standards of the People's Republic of China
- T/UNP 79-2024 Performance test of self-starting permanent magnet synchronous motor—Motor starting
- T/QGCML 1723-2023 RFID quick calibration startup module program system
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
- GB/T 19655-2005 Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements
GB-REG
- REG NASA-LLIS-0963-1995 Lessons Learned ?Space Shuttle Main Engine (SSME): Start Sequence Investigations
- REG NASA-LLIS-0609-1999 Lessons Learned ?Develop and Test the Launch Procedure Early (1997)
- REG UFGS-01 75 00-2012 STARTING AND ADJUSTING
Society of Automotive Engineers (SAE)
- SAE J544-1988 ELECTRIC STARTING MOTOR TEST PROCEDURE
- SAE J544-1996 Electric Starting Motor Test Procedure
- SAE J2437-1998 Air Starter Motor Test Procedures
- SAE J1635-1998 SAE Cold Start and Driveability Procedure
- SAE AIR1602-1991 STARTER SYSTEM OPTIMIZATION START ANALYSIS, TURBINE ENGINE - ELECTRIC, BATTERY POWER
SAE - SAE International
- SAE J544-1945 ELECTRIC STARTING MOTOR TEST PROCEDURE
- SAE J544-1982 Electric Starting Motor Test Procedure
- SAE J1635-1993 SAE Cold Start and Driveability Procedure
- SAE J1635-2002 SAE Cold Start and Driveability Procedure
- SAE J542-1987 Starting Motor Mountings
ECSS - European Cooperation for Space Standardization
- Q-ST-60-14C-2008 Relifing procedure - EEE components (First Issue)
RU-GOST R
- GOST 15.902-2014 System of development and launching into manufacture. Railway rolling stock. Procedure of development and launching into manufacture
British Standards Institution (BSI)
- BS ISO 789-12:2000 Agricultural tractors. Test procedures - Low temperature starting
GM Europe
- GME GMI L-6-14-1998 Cold Start and Cranking of Diesel Engines (English/German; Includes Appendix 1-4; ITDC Release, Draft for Harmonization)
IETF - Internet Engineering Task Force
- RFC 1985-1996 SMTP Service Extension for Remote Message Queue Starting
- RFC 4662-2006 A Session Initiation Protocol (SIP) Event Notification Extension for Resource Lists
Association Francaise de Normalisation
- NF EN 60155/A1:1997 Interrupteurs d'amorçage à lueur pour lampes à fluorescence (starters)
- NF EN 60155:1996 Interrupteurs d'amorçage à lueur pour lampes à fluorescence (starters)
- NF EN 60155/A2:2007 Interrupteurs d'amorçage à lueur pour lampes à fluorescence (starters)
GM North America
- GM GM9117P-1993 Immunity to Jump Start Voltages EMC - Component Test Procedure
CZ-CSN
- CSN 35 3152-1979 Motor starters. Rheostatic rotor starters
- CSN 36 4312-1979 Starting lead accumulator batteries. Series of minimal nominal capacities
Lithuanian Standards Office
- LST ISO 789-12:2001 Agricultural tractors. Test procedures. Part 12: Low temperature starting
GSO
- GSO ISO 789-12:2013 Agricultural tractors -- Test procedures -- Part 12: Low temperature starting
- GSO IEC 62297-1:2015 Triggering messages for broadcast applications - Part 1: Format
- GSO IEC 60927:2010 Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements
- OS GSO 1468:2002 Starters for fluorescent lamps.
- OS GSO ISO 11547:2013 Small craft -- Start-in-gear protection
US-FCR
- FCR DOE 425.1A-1998 STARTUP AND RESTART OF NUCLEAR FACILITIES
- FCR UFGS-01 75 00.00 40-2006 STARTING AND ADJUSTING
- FCR FED BLM 16481-1988 MOTOR STARTERS
- FCR VA 26 29 11-2010 MOTOR STARTERS
- FCR FED H-08-1 SEC 16155-2004 MOTOR STARTERS
HU-MSZT
- MNOSZ 13498-1953 boot band
SCC
- ISO 7010:2011/DAmd 158 Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 158: Safety sign M038: Start engine in launch sequence
- CAN/CGSB 69.35-M89/ANSI/BHMA A156.19-1984 Power-assisted opening doors and low kinetic energy automatic opening and closing doors
- BS EN 60927:1991 Specification for performance requirements for starting devices (other than glow starters)
- IEC 60927:1988/AMD1:1990 Amendment 1 - Starting devices (other than glow starters). Performance requirements.
BE-NBN
- NBN C 63-292 FASC 2-DEEL 2-1977 Starting device for low-pressure engines. Part 2: AC reduced voltage starter: star. triangle starter
- NBN C 63-292 FASC 4-DEEL 4-1977 Starting device for low-pressure engines. Part 4: AC reduced voltage starters: two-stage automatic transformer starters
- NBN C 63-292 FASC 3-DEEL 3-1977 Starting device for low-pressure engines. Part 3: Resistor Starter
Danish Standards Foundation
- DS/EN 60927+A1:1994 Starting devices (other than glow starters) - Performance requirements
Standard Association of Australia (SAA)
- AS 2697:1990 Jumper leads for automotive starting
Korean Agency for Technology and Standards (KATS)
- KS B ISO 15077:2014 Tractors and self-propelled machinery for agriculture – Operator controls – Actuating forces, displacement, location and method of operation
- KS B 7914-1994 Starting handle for power tiller
- KS R 5043-2016 Starter Switches for Automobiles
- KS W 4112-1977 car start switch
- KS B 7914-2013 Starting handle for power tiller
GM Daewoo
- GMKOREA EDS-T-2237-2006 COLD START TEST
- GMKOREA EDS-T-5105-2012 car starting battery
Institute of Electrical and Electronics Engineers (IEEE)
- IEEE/ANSI C37.53.1-1989 American National Standard High-Voltage Current-Limiting Motor-Starter Fuses -- Conference Test Procedures
- IEEE Std 622B-1988 IEEE Recommended Practice for Testing and Startup Procedures for Electric Heat Tracing Systems for Power Generating Stations
- ANSI C37.53.1-1989(R1996) American National Standard High-Voltage Current-Limiting Motor-Starter Fuses -- Conference Test Procedures
International Electrotechnical Commission (IEC)
- IEC 60927:1996 Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements
SE-SIS
- SIS SS 431 04 41-1987 Starters for tubular fluorescent lamps
YU-JUS
- JUS N.E3.829-1983 Test starter for the control of the performance and endurance at starterholders
sequence,activation element,Start spool,sequence sequence,start up,start an investigation,monitoring start,Project begining,promoter sequence,Project begining,Promoter sequence analysis,How long is the promoter sequence,sequence analysis sequence,u6 promoter sequence,boot sequence,promoter sequence,/start three,Starting current,start switch