Gold Instrument Vacuum Parameters

Gold Instrument Vacuum Parameters, Total:131 items.

The international standard classification for "Gold Instrument Vacuum Parameters" includes: Chemical analysis of metals , Mechanical testing of metals , Vacuum technology , Mechanical testing , Power stations in general .

The Chinese standard classification for "Gold Instrument Vacuum Parameters" includes: Vacuum technique and equipment , Optical instrument in general , Separating machinery , Metal mechanical property test method , Metal material testing machine , Technical management , Technical Management , Electric power testing technique .

National Metrological Verification Regulations of the People's Republic of China

JJG 802-2019 Distortion Meter Calibrators

Professional Standard - Machinery

JB/T 4080-1991 High vacuum solenoid valve type and basic parameters
JB/T 5410-1991 Type and Basic Parameters of Low-vacuum Electromagnetic Differential Pressure Gas Charging Valve
JB/T 5280.1-1991 Vacuum Vibrated Dryer - Type and Basic Parameters
JB/T 4077-1991 Type and basic parameters of high vacuum plug-in valve
JB/T 9399-1999 Main parameter series for the X-ray analytical instrumentation
JB/T 4079-1991 Type and basic parameters of high vacuum butterfly valve
JB/T 9399-2010 Main parameter series for the X-ray analytical instrumentation
JB/T 4083-1991 Type and basic parameters of vacuum electromagnetic belt charging valve
JB/T 10574-2013 Optical Length Measuring Instruments - Basic Parameters
JB/T 10574-2006 Optical length measuring instruments -- Basic parameters
JB/T 5410-2015 Vacuum electromagnetic differential pressure charge valves.Types and essential parameters
JB/T 4078-1991 Type and basic parameters of high vacuum baffle valve

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 21838.4-2008 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings
GB/T 3720-1988 Optical length measuring instruments--Basic parameters
GB/T 21838.3-2008 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
GB/T 21838.1-2008 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
GB/T 13218-1991 Horizontal-belt filter--Types and basic parameters
GB/T 22067.3-2008 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
GB/T 25755-2010 Vacuum technology - Sputter-ion pumps - Measurement of performance characteristics
GB/T 21838.3-2022 Metallic materials—Instrumented indentation test for hardness and materials parameters—Part 3:Calibration of reference blocks
GB/T 7774-2007 Vacuum technology -Turbomolecular pumps - Measurement of performance characteristics
GB/T 3121-1982 Nickel and its alloy wires for electronic tube

Military Standard of the People's Republic of China-General Armament Department

GJB/J 3416-1998 Calibration procedures for vacuum gauges (electrical parameters)
GJB 3426A-2018 Specification for precious metal solders for vacuum devices

Professional Standard - Electron

SJ 1776-1981 CK-100~600 ultra-high vacuum metal oil diffusion pump structure type and parameter series
SJ 1540-1987 Nickel and Nickel alloy wires for use in vacuum devices
SJ 861-1974 Vacuum resistance furnace-Basic parameters series
SJ 1541-1987 Nickel and Nickel alloy strips for vacuum tubes

国家建筑材料工业局

JC 343.1-1991 Vacuum brick extrusion machine type and basic parameters

Professional Standard - Building Materials

JC/T 343.1-2003 Vacuum extruder
JC/T 343.1-1991 Vacuum brick extrusion machine type and basic parameters

Professional Standard - Forestry

LY/T 1101-1993 Parameters of batch wood vacuum dryer

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 21838.1-2019 Metallic materials—Instrumented indentation test for hardness and materials parameters—Part 1:Test method

Professional Standard - Electricity

DL/T 846.9-2004 General technical specifications for high voltage test equipments Part 9: Vacuum interrupter detector

未注明发布机构

DIN EN ISO 14577-1 E:2012-03 Instrumental indentation testing of metallic materials for hardness and material parameters Part 1: Test methods (draft)
DIN EN ISO 14577-3 E:2012-03 Instrumental indentation testing of metallic materials hardness and material parameters Part 3: Calibration of hardness standard blocks (draft)
DIN EN ISO 14577-4 E:2015-05 Instrumental indentation tests for hardness and material parameters of metallic materials Part 4: Test methods for metallic and non-metallic coatings (draft)

RU-GOST R

GOST 20186-1974 Vacuum luminescent display tubes. Basic parameters
GOST 29180-1991 Electromagnetic compatibility of technical means. HUF equipment. Low noise amplifires. Parameters and characteristics. Methods of measurements
GOST 20271.1-1991 Microwave electronic devices. Methods of measuring electrical parameters
GOST 25662-1983 Vacuum equipment. Diffusion vacuum pumps. Test methods
GOST 26099-1984 Reciprocating vacuum pumps. Types and basic parameters
GOST 28742-1990 Batch operated vacuum pans for food. Types and main parameters
GOST 2182-1975 Electric vacuum devices. Anode and filament voltage
GOST 19300-1986 Instruments for measurement of surface roughness by the profile method. Contact profilographs and profilometers. Types and main parameters
GOST 14707-1982 Rotary vane and valve vacuum pumps. Tupes and basic parametrs
GOST 10387-1981 Measuring machines for checking fine pitch spur gears. Types. Basic dimensions, standards of accuracy
GOST 9847-1979 Optical instruments for surface roughness parameters measuring. Basis parameters and types

RO-ASRO

STAS 12098-1986 VACUUM FILTERS Types and main parameters

GOST

GOST R 71061-2023 Sign-synthesizing vacuum indicators. Parameters system

CZ-CSN

CSN 36 1413-1974 Testing methods of functional parametcrs of electric vacuum cleancrs
CSN 10 7060-1984 Mechanical vacuum pumps. Methods of measurement of the fundamental para-meters
CSN 25 2300-1972 Classification of instruments and devices or measurement of the geometrical arameters of surface finish

AT-ON

ONORM M 6773-2001 Surface texture of tooth flanks - Roughness parameters, determination of roughness parameters using stylus instruments, measuring instruments and measuring conditions

German Institute for Standardization

DIN 12545:1977 Laboratory glassware; vacuum stopcocks
DIN 28402:1976 Vacuum technology; quantities, symbols, units, summary
DIN 28418-2:1978 Vakuum technology; standard method for vacuum gauge calibration by direct comparison with a reference vaccum gauge, ionization vacuum gauge
DIN EN ISO 14577-3:2015-11 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015); German version EN ISO 14577-3:2015
DIN 12492:1998 Laboratory glassware - Instruments with vacuum-jacket insulation
DIN EN ISO 14577-1:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2002); German version EN ISO 14577-1:2002
DIN EN ISO 14577-3:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2002); German version EN ISO 14557-3:2002
DIN EN ISO 14577-1:2015-11 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015); German version EN ISO 14577-1:2015
DIN EN ISO 14577-4:2017-04 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2016); German version EN ISO 14577-4:2016

Korean Agency for Technology and Standards (KATS)

KS B ISO 14577-3-2017 Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 3：Calibration of reference blocks
KS W 0613-1976(2012) Equipment standard of aircraft instruments and panel
KS D ISO 14577-4:2011 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 4:Test method for metallic and non-metallic coatings
KS B ISO 14577-1:2015 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 1:Test method
KS B ISO 14577-1:2004 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 1:Test method
KS B ISO 14577-1-2015 Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 1：Test method
KS B ISO 14577-3:2004 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 3:Calibration of reference blocks
KS B ISO 14577-3:2017 Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 3：Calibration of reference blocks
KS D ISO 14577-4-2021 Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 4：Test method for metallic and non-metallic coatings
KS D ISO 14577-4-2011(2016) Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 4：Test method for metallic and non-metallic coatings
KS D ISO 14577-4-2011(2021) Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 4：Test method for metallic and non-metallic coatings
KS B ISO 14577-3-2004(2009) Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 3：Calibration of reference blocks

British Standards Institution (BSI)

BS ISO 21360-3:2019 Vacuum technology. Standard methods for measuring vacuum pump performance - Specific parameters for mechanical booster vacuum pumps
BS ISO 14577-5:2022 Metallic materials. Instrumented indentation test for hardness and materials parameters - Linear elastic dynamic instrumented indentation testing (DIIT)
BS ISO 3567:2011 Vacuum gauges. Calibration by direct comparison with a reference gauge
BS EN ISO 14577-3:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters. Calibration of reference blocks
BS EN ISO 14577-3:2002 Metallic materials. Instrumented indentation test for hardness and materials parameters. Calibration of reference blocks
BS EN ISO 14577-4:2016 Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method for metallic and non-metallic coatings
BS EN ISO 14577-4:2007 Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method for metallic and non-metallic coatings
24/30458534 DC BS EN ISO 14577-3 Metallic materials -Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
20/30383255 DC BS ISO 14577-5. Metallic materials. Instrumented indentation test for hardness and materials parameters. Part 5. Linear elastic dynamic instrumented indentation testing (DIIT)
21/30426752 DC BS ISO 24477. Vacuum technology. Vacuum gauges. Specifications, calibration and measurement uncertainties for spinning rotor gauges

GSO

BH GSO ISO 14577-3:2015 Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 3: Calibration of reference blocks
OS GSO ISO 14577-3:2014 Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 3: Calibration of reference blocks
OS GSO ISO 14577-4:2014 Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 4: Test method for metallic and non-metallic coatings

ES-UNE

UNE-EN ISO 14577-3:2016 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015)
UNE-EN ISO 14577-1:2016 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015)

International Organization for Standardization (ISO)

ISO/CD 14577-3:2023 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks
ISO 14577-1:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
ISO 21360-3:2019 Vacuum technology — Standard methods for measuring vacuum pump performance — Part 3: Specific parameters for mechanical booster vacuum pumps
ISO 14577-5:2022 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 5: Linear elastic dynamic instrumented indentation testing (DIIT)
ISO 14577-1:2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
ISO 14577-3:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
ISO 14577-3:2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
ISO/CD 14577-1:2023 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 1: Test method
ISO 14577-4:2016 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings
ISO 14577-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings

Association Francaise de Normalisation

NF ISO 27893:2013 Vacuum technique - Vacuum pressure gauges - Evaluation of the uncertainty of calibration results by direct comparison with a reference pressure gauge
NF ISO 21360-3:2019 Technique du vide - Méthodes normalisées pour mesurer les performances des pompes à vide - Partie 3 : paramètres spécifiques aux pompes à vide intermédiaires mécaniques
NF X10-510-3*NF ISO 21360-3:2019 Vacuum technology - Standard methods for measuring vacuum pump performance - Part 3 : specific parameters for mechanical booster vacuum pumps
NF X15-110:1994 Air humidity measurement - Hygrometric parameters
NF A03-155-1*NF EN ISO 14577-1:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1 : test method
NF A03-155-1:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1 : test method.
NF A03-155-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4 : test method for metallic and non-metallic coatings.
NF A03-155-4*NF EN ISO 14577-4:2017 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4 : test method for metallic and non-metallic coatings
NF A03-155-3:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3 : calibration of reference blocks.
NF A03-155-3*NF EN ISO 14577-3:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3 : calibration of reference blocks

IT-UNI

UNI ISO 21360-3:2020 Vacuum technology -- Standard methods for measuring vacuum pump performance - Part 3: Specific parameters for mechanical booster vacuum pumps

GOSTR

GOST 34348-2017 Vacuum technology. Vacuum gauges. Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge

SCC

NS-EN ISO 14577-3:2002 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks (ISO 14577-3:2002)
12/30248590 DC BS ISO 14577-3. Metallic materials. Instrumented indentation test for hardness and materials parameters. Part 3. Calibration of reference blocks
UNE-EN ISO 14577-3:2005 Metallic materials - Instrumented indentation test for hardness and materials parameters. Part 3: Calibration of reference blocks (ISO 14577-3:2002)
NS-EN ISO 14577-3:2015 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks (ISO 14577-3:2015)
AENOR UNE-EN ISO 14577-3:2016 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015)
DANSK DS/EN ISO 14577-3:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015)
DIN EN ISO 14577-3 E:2012 Draft Document - Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO/DIS 14577-3:2012); German version prEN ISO 14577-3:2012
NS-EN ISO 14577-1:2002 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 1: Test method (ISO 14577-1:2002)

ZA-SANS

SANS 14577-3:2009 Metallic materials - Instrumented indentation test for hardness and materials parameters Part 3: Calibration of reference blocks
SANS 982:1990 High-pressure high-vacuum steam sterilizers (autoclaves)
SANS 14577-1:2009 Metallic materials - Instrumented indentation test for hardness and materials parameters Part 1: Test method

HU-MSZT

MSZ KGST 1855-1979 Air pressure gauges, vacuum pressure gauges, counting tables and proportional tables for vacuum gauges

Danish Standards Foundation

DS/EN ISO 14577-1:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
DS/EN ISO 14577-3:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
DS/EN ISO 14577-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings

European Committee for Standardization (CEN)

prEN ISO 14577-1 rev Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
prEN ISO 14577-3 rev Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks

Lithuanian Standards Office

LST EN ISO 14577-3:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2002)

Others: Gold Instrument Vacuum Parameters