iso vibration test

iso vibration test, Total:260 items.

The international standard classification for "iso vibration test" includes: Vibrations, shock and vibration measurements , Mechanical testing , Pumps , Hydraulic energy engineering .

The Chinese standard classification for "iso vibration test" includes: Railway engineering , Basic standards and general methods , Mechanical vibration, impact equipment and dynamic balancing machine , Pump , Water turbine and its auxiliary equipment , Sewing machine .

Professional Standard - Ferrous Metallurgy

YBJ 21-1991 Vibration Test Procedure

未注明发布机构

DIN 45669-1:2019-09 Measurement of vibration immissions - Part 1: Vibration meters - Requirements and tests
DIN 45669-1:2019-03 Measurement of vibration immissions - Part 1: Vibration meters - Requirements and tests
DIN EN ISO 6721-3:2021 Plastics – Determination of dynamic mechanical properties – Part 3: Bending vibration – Resonance curve method (ISO 6721-3:2021)
DIN EN ISO 8041-2:2022 Vibration effects on people – Measuring equipment – Part 2: Measuring devices for human vibration effects (ISO 8041-2:2021)
DIN 45669-1 E:2018-05 Measurement of vibration immissions - Part 1: Vibration meters - Requirements and tests
ASTM RR-D10-1011 1997 D3580-Test Methods for Vibration (Vertical Linear Motion) Test of Products
DIN EN 60068-2-6:1996 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
DIN 45669-1 E:2008-09 Measurement of vibration immissions - Part 1: Vibration meters - Requirements and tests

Military Standard of the People's Republic of China-General Armament Department

GJB 7952-2012 Measurement methods for vibratory gyros

Professional Standard - Railway

TB/T 2488-1994 Test Method for Strain and Vibration of Ballast Bed

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 28784.2-2014 Mechanical vibration—Measurement of vibration on ships—Part 2: Measurement of structural vibration
GB/T 44401-2024 Tri-axis simultaneous electrodynamic testing system
GB/T 13823.8-1994 for the calibration of vibration and shock pick－ps - Testing of transverse vibration sensitivity
GB/T 6587.4-1986 Vibration tests for electronic measuring instruments
GB/T 17189-1997 Code for field measurement of vibrations and pulsations in hydraulic machines
GB/T 13364-1992 Measurement of mechanical vibration for reciprocating pump
GB/T 44400-2024 Dual electro-dynamic shakers simultaneous vibration testing system
GB/T 10398-1989 The measuring method of vibration for small gasoline engine
GB/T 13364-2008 Measurement of mechanical vibration for reciprocating pump

Professional Standard-Ships

CB 1320-1998 Torpedo vibration modal measurement method

Group Standards of the People's Republic of China

T/SZBX 148-2023 Electrodynamic vibration testing systems

工业和信息化部

QB/T 1178-2021 Industrial sewing machine-Testing method of vibration

Professional Standard - Light Industry

QB/T 1178-1991 Testing Method for Vibration of Industrial Sewing Machine

National Metrological Verification Regulations of the People's Republic of China

JJG 948-2018 Electrodynamic Vibration Testing Systems

Taiwan Provincial Standard of the People's Republic of China

CNS 9657-1982 Testing of Vibrating Rollers for Its Vibrating & Driving Operations

Professional Standard - Electricity

DL/T 1103-2009 Testing and evaluation of vibration in nuclear power plant piping system

British Standards Institution (BSI)

20/30386448 DC BS ISO 23670. Space systems. Vibration testing
22/30403027 DC BS ISO 24411. Space systems. Micro-vibration testing
15/30273263 DC BS ISO 18324. Timber structures. Test methods. Floor vibration
BS EN IEC 60068-2-86:2024 Environmental testing - Tests. Test Fx: Vibration. Multi-exciter and multi-axis method
BS EN 1032:2003+A1:2008 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value
BS EN 1032:2003+A1:2008(2009) Mechanical vibration — Testing of mobile machinery in order to determine the vibration emission value
PD ISO/TR 230-8:2010 Test code for machine tools. Vibrations
BS ISO 23670:2021 Space systems. Vibration testing
23/30426806 DC BS ISO 5309. Vibration test methods for lightweight and small civil UAS
BS ISO 24411:2022 Space systems. Micro-vibration testing
20/30383278 DC BS EN ISO 10819 AMD2. Mechanical vibration and shock. Hand-arm vibration. Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand
BS EN 1032:2003 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value
BS ISO 20283-2:2009 Mechanical vibration. Measurement of vibration on ships. Measurement of structural vibration
BS ISO 20283-2:2008 Mechanical vibration - Measurement of vibration on ships - Measurement of structural vibration
PD ISO/TR 27609:2007 Vibration in hand-held tools. Vibration measurement methods for grinders. Evaluation of round-robin test
BS ISO 20283-2:2008(2009) Mechanical vibration — Measurement of vibration on ships Part 2 : Measurement of structural vibration
19/30383016 DC BS ISO 20816-9. Mechanical vibration. Measurement and evaluation of machine vibration. Part 9. Gear units
BS ISO 20283-3:2006+A1:2016 Mechanical vibration. Measurement of vibration on ships - Pre-installation vibration measurement of shipboard equipment
21/30427370 DC BS ISO 6721-12. Plastics. Determination of dynamic mechanical properties. Part 12. Compressive vibration. Non-resonance method
BS ISO 20283-4:2012+A1:2014 Mechanical vibration. Measurement of vibration on ships. Measurement and evaluation of vibration of the ship propulsion machinery
BS EN 60068-2-64:2008+A1:2019 Environmental testing - Tests. Test Fh: Vibration, broadband random and guidance
BS EN IEC 60068-2-85:2019 Environmental testing - Tests. Test Fj. Vibration. Long time history replication
23/30466826 DC BS ISO 10813-1. Vibration generating machines. Guidance for selection - Part 1. Equipment for environmental testing
BS 2782-3 Method 323C:1996 Methods of testing plastics. Mechanical properties. Shear vibration. Non-resonance method
BS 2782-3 Method 323B:1996 Methods of testing plastics. Mechanical properties. Flexural vibration. Non-resonance method
BS 2782-3 Method 323D:1996 Methods of testing plastics. Mechanical properties. Torsional vibration. Non-resonance method
BS ISO 16063-31:2009 Methods for the calibration of vibration and shock transducers - Testing of transverse vibration sensitivity
20/30376305 DC BS EN ISO 22867. Forestry and gardening machinery. Vibration test code for portable hand-held machines with internal combustion engine. Vibration at the handles
BS EN 60255-21-1:1996 Electrical relays. Vibration, shock, bump and seismic tests on measuring relays and protection equipment. Vibration tests (sinusoidal)
BS ISO 20283-3:2006 Mechanical vibration - Measurement of vibration on ships - Pre-installation vibratory noise measurement of shipboard equipment
20/30406584 DC BS EN ISO 6721-3. Plastics. Determination of dynamic mechanical properties. Part 3. Flexural vibration. Resonance-curve method
23/30453591 DC ISO 20816-21 Mechanical vibration. Measurement and evaluation of machine vibration. - Part 21. Horizontal axis wind turbines

SCC

07/30163187 DC BS ISO 20283-2. Mechanical vibration. Measurement of vibration on ships. Part 2. Structural vibration
11/30237786 DC BS ISO 20283-4. Mechanical vibration. Measurement of vibration on ships. Part 4. Measurement and evaluation of vibration of the ship propulsion machinery
BS 2011-2.1FC:1983 Environmental testing. Tests-Test Fc. Vibration (sinusoidal)
NS-EN 1032:2003 Mechanical vibration — Testing of mobile machinery in order to determine the vibration emission value
UNE-EN 1032:2004 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value
NS-EN ISO 10819:2013 Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (ISO 10819:2013)
BS PD 6467:1972 Arrangement of vibration tester
08/30190109 DC BS ISO 4866. Mechanical vibration and shock. Vibration of fixed structures. Guidelines for the measurement of vibrations and evaluation of their effects on structures
AENOR UNE-EN ISO 10819:2014 Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (ISO 10819:2013)
08/30182517 DC BS ISO 16063-31. Methods for the calibration of vibration and shock transducers. Part 31. Testing of transverse vibration sensitivity
BS PD ISO/TR 230-8:2010 Test code for machine tools-Vibrations
UNE-EN ISO 10819:1996 MECHANICAL VIBRATION AND SHOCK. HAND-ARM VIBRATION. METHOD FOR THE MEASUREMNT AND EVALUATION OF THE VIBRATION TRANSMISSIBILITY OF GLOVES AT THE PALM OF THE HAND (ISO 10819:1996).
NS-EN ISO 10819:1996 Mechanical vibration and shock — Hand-arm vibration — Method for the measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (ISO 10819:1996)
DIN 45669-1 E:2018 Draft Document - Measurement of vibration immissions - Part 1: Vibration meters - Requirements and tests
11/30212883 DC BS EN ISO 10819. Mechanical vibration and shock. Hand-arm vibration. Method for the measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand
NS-EN 1032:2003+A1:2008 Mechanical vibration — Testing of mobile machinery in order to determine the vibration emission value
AENOR UNE-EN 1032+A1:2009 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value
DANSK DS/EN ISO 8041-1:2017 Human response to vibration – Measuring instrumentation – Part 1: General purpose vibration meters (ISO 8041-1:2017)
NS-EN ISO 22867:2006 Forestry machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2004)
NS-EN ISO 8041-1:2017 Human response to vibration — Measuring instrumentation — Part 1: General purpose vibration meters (ISO 8041-1:2017)
AENOR UNE-EN ISO 5395-1/A1:2018 Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 1: Terminology and common tests - Amendment 1: Annex G (Vibration test code - Hand-arm vibration and whole-body vibration) (ISO 5395-1:2013/Amd 1:2017)
BS PD ISO/TR 27609:2007 Vibration in hand-held tools. Vibration measurement methods for grinders. Evaluation of round-robin test
UNE-EN ISO 22867:2006 Forestry machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2004)
AENOR UNE-EN ISO 8041-1:2018 Human response to vibration - Measuring instrumentation - Part 1: General purpose vibration meters (ISO 8041-1:2017)
UNE-EN ISO 13753:1999 MECHANICAL VIBRATION AND SHOCK. HAND-ARM VIBRATION. METHOD FOR MEASURING THE VIBRATION TRANSMISSIBILITY OF RESILIENT MATERIALS WHEN LOADED BY THE HAND-ARM SYSTEM. (ISO 13753:1998)
NS-EN 1032:1996 Mechanical vibration — Testing of mobile machinery in order to determine the whole-body vibration emission value — General
DIN EN ISO 10819 E:2011 Draft Document - Mechanical vibration and shock - Hand-arm vibration - Method for the measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (ISO/DIS 10819:2011); German version prEN ISO 10819:2011
10/30205782 DC BS ISO 2954. Mechanical vibration of rotating and reciprocating machinery. Requirements for instruments for measuring vibration severity
NS-EN ISO 8041:2005 Human response to vibration — Measuring instrumentation (ISO 8041:2005)
AENOR UNE-EN ISO 8041:2006 Human response to vibrations. Measuring instruments (ISO 8041:2005)
BS EN 1032:1997 Mechanical vibration. Testing of mobile machinery in order to determine the whole-body vibration emission value. General
DANSK DS/EN ISO 8041-2:2021 Human response to vibration – Measuring instrumentation – Part 2: Personal vibration exposure meters (ISO 8041-2:2021)
NS-EN ISO 8041-2:2021 Human response to vibration - Measuring instrumentation - Part 2: Personal vibration exposure meters (ISO 8041-2:2021)
NS-EN ISO 22867:2011 Forestry and gardening machinery — Vibration test code for portable hand-held machines with internal combustion engine — Vibration at the handles (ISO 22867:2011)
NS-EN ISO 13753:1998 Mechanical vibration and shock — Hand-arm vibration — Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system (ISO 13753:1998)
AENOR UNE-EN ISO 13753:2008 Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system (ISO 13753:1998)
DANSK DS/EN 60068-2-6:2008 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
07/30171061 DC BS ISO 2041. Mechanical vibration, shock and condition monitoring. Vocabulary
07/30171973 DC BS EN ISO 6721-12. Plastics. Determination of dynamic mechanical properties. Part 12. Compressive vibration. Non-resonance method
CEI EN 60068-2-6:2009 Environmental testing Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
DANSK DS/EN ISO 6721-3:2021 Plastics – Determination of dynamic mechanical properties – Part 3: Flexural vibration – Resonance-curve method (ISO 6721-3:2021)
NS-EN ISO 6721-3:2021 Plastics — Determination of dynamic mechanical properties — Part 3: Flexural vibration — Resonance-curve method (ISO 6721-3:2021)
DIN EN 60068-2-57 E:2011 Draft Document - Environmental testing - Part 2-57: Test methods - Test Ff: Vibration - Time-history & sine-beat method (IEC 104/530/CDV:2010); German version FprEN 60068-2-57:2010
DIN ISO 13373-3 E:2014 Draft Document - Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 3: Guidelines for vibration diagnosis (ISO/DIS 13373-3:2014)
BS 2011-2.1FDC:1973 Environmental testing. Tests-Test Fdc. Random vibration - wide band reproducibility low
DIN EN ISO 10819/A1 E:2017 Draft Document - Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand - Amendment 1 (ISO 10819:2013/DAM 1:2017); German and English version EN ISO 10819:201...
BS 2011-2.1FD:1973 Environmental testing. Tests-Test Fd. Random vibration - wide band, general requirements
DANSK DS/EN 16929:2018 Test methods – Timber floors – Determination of vibration properties
UNE-EN ISO 22867:2009 Forestry machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2004, including Cor 1:2006)
DANSK DS/ISO/TR 230-8:2015 Test code for machine tools - Part 8: Vibrations

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE AN-04-2-3-2004 Shake Table Testing
ASHRAE 87.1-1992 Method of Testing Fan Vibration - Blade Vibrations and Critical Speeds

GOSTR

GOST R 53963.2-2010 Vibration. Measurement of vibrations in buildings. Measuring instrumentation tests
GOST R ISO 20283-2-2017 Mechanical vibration. Measurement of vibration on ships. Part 2. Measurement of structural vibration
GOST 28988-1991 Fluid power systems. Vibration characteristics, vibration tests
GOST 31351-2007 Vibration. Industrial fans. Measurement of vibration

AT-ON

ONORM M 6326 Teil.1-1989 Rolling bearings; Vibration and noise; methods of Vibration measurement

NL-NEN

NVN-ISO 8041:1993 Human response to vibration. Measuring instrumentation (ISO 8041:1990)

SE-SIS

SIS SEN 43 16 06-1971 Environmental testing. Vibration Test F
SIS SS-ISO 8568:1990 Vibration andshock — Mechanical vibration andshock — Shock-testing machines — Characteristics and performance

Association Francaise de Normalisation

NF E90-453*NF EN 1032+A1:2009 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value.
NF EN 1032+A1:2009 Mechanical vibrations - Testing of mobile machines for the purpose of determining the vibration emission value
NF EN 1032/IN1:2009 Mechanical vibrations - Testing of mobile machines for the purpose of determining the vibration emission value
NF E90-453/IN1*NF EN 1032/IN1:2009 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value
NF ISO 20283-2:2014 Vibrations mécaniques - Mesurage des vibrations à bord des navires - Partie 2 : mesurage des vibrations structurelles
NF E90-453:2003 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value.
NF ISO 10055:2014 Mechanical vibration - Requirements for vibration testing of on-board equipment and machine components
NF E90-972-2*NF ISO 20283-2:2014 Mechanical vibration - Measurement of vibration on ships - Part 2 : measurement of structural vibration
NF EN 60068-2-6:2008 Essais d'environnement - Partie 2-6 : essais - Essai Fc : vibrations (sinusoïdales)
NF E90-453:1997 Mechanical vibration. Testing of mobile machinery in order to determine the whole-body vibration emisson value. General.
NF E90-700:1999 Mechanical vibration and shock. Hand-arm vibration. Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system.
NF ISO 20283-3:2015 Mechanical vibrations - Measurement of vibrations on board ships - Part 3: measurement of vibrations of on-board equipment before their installation

GB-REG

REG NASA-HDBK-7004 REV C-2012 FORCE LIMITED VIBRATION TESTING
REG NASA-LLIS-0775-2000 Lessons Learned ?Random Vibration Testing

GM Europe

GME L-9B-1-2008 Steering wheel vibration test

DIN

DIN 45669-1:2019 Measurement of vibration immissions - Part 1: Vibration meters - Requirements and tests
DIN ISO 10816 Supplement 1:2013 Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Supplement 1: Methodology for selecting machinery vibration standards, including the shaft vibration (ISO/TR 19201:2013)

German Institute for Standardization

DIN EN 1032:2009-02 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value; German version EN 1032:2003+A1:2008 / Note: DIN EN 1032 (2003-09) remains valid alongside this standard until 2009-12-28.
DIN 45669-1:2020-06 Measurement of vibration immissions - Part 1: Vibration meters - Requirements and tests
DIN EN 1032:2009 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value (includes Amendment A1:2008); English version of DIN EN 1032:2009-02
DIN EN ISO 10819:2013 Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (ISO 10819:2013); German version EN ISO 10819:2013
DIN 45669-1:2020 Measurement of vibration immissions - Part 1: Vibration meters - Requirements and tests
DIN 45669-1:2010 Measurement of vibration immission - Part 1: Vibration meters - Requirements and tests
DIN ISO 20816-9:2021 Mechanical vibration - Measurement and evaluation of machine vibration - Part 9: Gear units (ISO 20816-9:2020)
DIN EN ISO 8041-1:2017 Human response to vibration - Measuring instrumentation - Part 1: General purpose vibration meters (ISO 8041-1:2017)
DIN ISO 10816 Beiblatt 1:2013 Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Supplement 1: Methodology for selecting machinery vibration standards, including the shaft vibration (ISO/TR 19201:2013)
DIN ISO 20816-1:2017 Mechanical vibration - Measurement and evaluation of machine vibration - Part 1: General guidelines (ISO 20816-1:2016)
DIN ISO 10816 Bb.1:2013 Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Supplement 1: Methodology for selecting machinery vibration standards, including the shaft vibration (ISO/TR 19201:2013)
DIN EN ISO 10819:2022 Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (ISO 10819:2013 + Amd.1:2019 + Amd.2:2021)
DIN ISO 13373-3:2015 Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 3: Guidelines for vibration diagnosis (ISO 13373-3:2015)
DIN EN ISO 10819:2019 Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (ISO 10819:2013 + Amd.1:2019) (includes Amendment :2019)
DIN EN ISO 8041-2:2022-02 Human response to vibration - Measuring instrumentation - Part 2: Personal vibration exposure meters (ISO 8041-2:2021); German version EN ISO 8041-2:2021
DIN EN ISO 10819/A1:2017 Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand - Amendment 1 (ISO 10819:2013/DAM 1:2017); German and English version EN ISO 10819:2013/prA1:2017
DIN EN ISO 22867:2022-03 Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2021); German version EN ISO 22867:2021
DIN EN ISO 13753 Berichtigung 1:2009-01 Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system (ISO 13753:1998); German version EN ISO 13753:2008, Corrigendum to DIN EN ISO 13753:2008-09
DIN EN ISO 10819/A2:2020 Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand - Amendment 2 (ISO 10819:2013/DAM 2:2020); German and English version EN ISO 10819:2013/prA2:2020
DIN ISO 10817-1:1999 Rotating shaft vibration measuring systems - Part 1: Relative and absolute sensing of radial vibration (ISO 10817-1:1998)
DIN EN ISO 6721-3:2021-05 Plastics - Determination of dynamic mechanical properties - Part 3: Flexural vibration - Resonance-curve method (ISO 6721-3:2021); German version EN ISO 6721-3:2021
DIN EN ISO 8041-2:2020 Human response to vibration - Measuring instrumentation - Part 2: Personal vibration exposure meters (ISO/DIS 8041-2:2020); German and English version prEN ISO 8041-2:2020
DIN EN ISO 22867:2020 Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO/DIS 22867:2020); German and English version prEN ISO 22867:2020
DIN ISO 15242-1:2014 Rolling bearings - Measuring methods for vibration - Part 1: Fundamentals (ISO 15242-1:2004)
DIN ISO 1925:2002 Mechanical vibration - Balancing - Vocabulary (ISO 1925:2001)
DIN ISO 15242-1:2018 Rolling bearings - Measuring methods for vibration - Part 1: Fundamentals (ISO 15242-1:2015)
DIN ISO 2954:2012 Mechanical vibration of rotating and reciprocating machinery - Requirements for instruments for measuring vibration severity (ISO 2954:2012)

GSO

OS GSO EN 1032:2011 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value
GSO IEC 60068-2-6:2010 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
BH GSO IEC 60068-2-6:2011 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
OS GSO IEC 60068-2-6:2010 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
BH GSO ISO 20283-3:2016 Mechanical vibration -- Measurement of vibration on ships -- Part 3: Pre-installation vibration measurement of shipboard equipment
OS GSO ISO/TR 230-8:2010 Test code for machine tools -- Part 8: Vibrations
GSO ISO/TR 230-8:2013 Test code for machine tools -- Part 8: vibration

Korean Agency for Technology and Standards (KATS)

KS B 4009-1986 Methods of vibration testing for machine tools
KS B 4009-2002(2012) Methods of vibration testing for machine tools
KS B 0141-2001 Mechanical vibration of rotating and reciprocating machinery-Requirements for instruments for measuring vibration severity
KS M 6604-2016 Testing method for rubber vibration islators
KS B ISO 20283-2:2019 Mechanical vibration — Measurement of vibration on ships — Part 2: Measurement of structural vibration
KS B 6540-2013 Testing Method of Vibrating Rollers
KS B ISO 20283-2:2014 Mechanical vibration — Measurement of vibration on ships — Part 2: Measurement of structural vibration
KS B ISO 10816-1:2011 Mechanical vibration-Evaluation of machine vibration by measurements on non-rotating parts-Part 1:General guidelines
KS B ISO 10816-1:2016 Mechanical vibration－Evaluation of machine vibration by measurements on non-rotating parts－Part 1：General guidelines
KS C IEC 60068-2-6-2015(2020) Environmental testing — Part 2-6: Tests — Test Fc: Vibration(sinusoidal)
KS C IEC 60068-2-6-2020 Environmental testing — Part 2-6: Tests — Test Fc: Vibration(sinusoidal)
KS C 0903-2003 Vibration testing procedure for electric machines and equipment
KS B 7059-2020 Methods of vibration measurement for industrial sewing machine
KS B ISO 20283-3:2009 Mechanical vibration-Measurement of vibration on ships- Part 3:Pre-installation vibration measurement of shipboard equipment

AENOR

UNE-EN ISO 10819:2014 Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (ISO 10819:2013)
UNE-EN 1032:2004+A1:2009 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value
UNE-EN ISO 8041:2006 Human response to vibration - Measuring instrumentation (ISO 8041:2005)
UNE-EN ISO 13753:2008 Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system (ISO 13753:1998)
UNE 137003:2003 Corrugated fibreboard packaging for fruits and vegetables. Vibration tests at fixed low frequency.( vibrant and oscillant table).
UNE-EN ISO 22867:2012 Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2011)
UNE-EN 60068-2-6:2008 Environmental testing- Part 2-6: Tests- Test Fc: Vibration (sinusoidal)

CZ-CSN

CSN 35 0019 Cast.02-1979 Rotating electrical machines. Vibration tests
CSN 35 0019 Cast.03-1979 Rotating electrical machines. Vibration, tests of aggregates
CSN 35 6854-1987 Vibration. Vibration isolators. General requirements for tests

PL-PKN

PN N01355-1991 Vibrations. Measuring instrumentation for measuring human response to vibrations. Requirements and tests
PN N01352-1991 Vibration. Work place vibration measuring requirements
PN-EN ISO 6721-3-2021-08 E Plastics--Determination of dynamic mechanical properties--Part 3: Flexural vibration--Resonance-curve method (ISO 6721-3:2021)
PN S04100-1991 Vibration. Test methods and evaluation of mechanical vibration at work places of vehicles
PN E88607-1990 Electrical relays Vibration shock, bump and seismic tests on measuring relays and protection equipmentShock and bump tests

SAE - SAE International

SAE J2380-2021 Vibration Testing of Electric Vehicle Batteries
SAE J577-2005 Vibration Test Machine and Operation Procedure
SAE J577-2015 VIBRATION TEST MACHINE
SAE J577-1958 VIBRATION TEST MACHINE

Society of Automotive Engineers (SAE)

SAE J2380-2009 Vibration Testing of Electric Vehicle Batteries
SAE J2380-2013 Vibration Testing of Electric Vehicle Batteries
SAE J1765-2011 SAE Miniature Bulb Vibration Test
SAE J1765-1995 SAE Miniature Bulb Vibration Test
SAE J1765-2006 SAE Miniature Bulb Vibration Test
SAE ARP6068-2010 Gas Turbine Engine Test Facility Vibration Measurement
SAE J577-2011 Vibration Test Machine
SAE ARP6068-2017 Gas Turbine Engine Test Facility Vibration Measurement
SAE J577-1973 VIBRATION TEST MACHINE
SAE J577-1964 VIBRATION TEST MACHINE
SAE TS360-2-1990 TS360 Test for Electrical Connectors Random Vibration
SAE J1765-2012 SAE Miniature Bulb Vibration Test (Stabilized Type)
SAE TS360-3-2022 TS360 TEST FOR ELECTRICAL CONNECTORS - RANDOM VIBRATION

RU-GOST R

GOST R 53080-2008 Vibration. Testing of mobile machinery in order to determine the vibration emission value. Industrial trucks
GOST ISO 8579-2-2002 Vibration. Determination of mechanical vibrations of gear units during acceptance testing
GOST ISO 16063-31-2013 Mechanical vibration. Methods for the calibration of vibration and shock transducers. Part 31. Testing of transverse vibration sensitivity
GOST 31421-2010 Vibration. Testing of mobile machinery in order to determine the vibration emission value. Industrial trucks
GOST 31193-2004 Vibration. Testing of mobile machinery in order to determine the vibration emission value. General requirements
GOST R 53964-2010 Mechanical vibration. Measurements of vibration in structures. Guidance on measurement methods

Lithuanian Standards Office

LST EN ISO 10819:2000 Mechanical vibration and shock - Hand-arm vibration - Method for the measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (ISO 10819:1996)
LST EN ISO 8041:2005 Human response to vibration - Measuring instrumentation (ISO 8041:2005)
LST EN ISO 13753:2008 Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system (ISO 13753:1998)
LST EN 1032-2003+A1-2009 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value
LST EN ISO 8041-2:2021 Human response to vibration - Measuring instrumentation - Part 2: Personal vibration exposure meters (ISO 8041-2:2021)
LST EN ISO 22867:2012 Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2011)
LST EN ISO 6721-3:2021 Plastics - Determination of dynamic mechanical properties - Part 3: Flexural vibration - Resonance-curve method (ISO 6721-3:2021)

Electronic Components, Assemblies and Materials Association

ECA TEP146-1964 Philosophy of Vibration Testing of Receiving Tubes (TEP46)

GOST

GOST R 50209-1992 Vibration. Requirements for means of testing mechanical hammers

Acoustical Society of America (ASA)

ASA S3.40-2002 Mechanical Vibration and Shock Hand-Arm Vibration Method for the Measurement and Evaluation of the Vibration Transmissibility of Gloves at the Palm of the Hand ISO 10819:1996

European Committee for Standardization (CEN)

EN ISO 10819:1996 Mechanical Vibration and Shock - Hand-Arm Vibration - Method for the Measurement and Evaluation of the Vibration Transmissibility of Gloves at the Palm of the Hand ISO 10819:1996
DD ENV 28041-1993 Human Response to Vibration - Measuring Instrumentation (ISO 8041 : 1990)
EN 1032:1996/PRA1:1997 AMD prA1 Mechanical Vibration - Testing of Mobile Machinery in Order to Determine the Whole-Body Vibration Emission Value - General
EN 1032:1996 (WITHDRAWN) Mechanical Vibration - Testing of Mobile Machinery in Order to Determine the Whole-Body Vibration Emission Value - General

ECIA - Electronic Components Industry Association

TEP146-1964 Philosophy of Vibration Testing of Receiving Tubes (TEP46)
364-28B-1996 TP-28B Vibration Test Procedure for Electrical Connectors

KR-KS

KS B ISO 20283-2-2019 Mechanical vibration — Measurement of vibration on ships — Part 2: Measurement of structural vibration

ES-UNE

UNE-EN ISO 5395-1:2014/A1:2018 Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 1: Terminology and common tests - Amendment 1: Annex G (Vibration test code - Hand-arm vibration and whole-body vibration) (ISO 5395-1:2013/Amd 1:2017)
UNE-EN ISO 10819:2014/A2:2023 Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand - Amendment 2 (ISO 10819:2013/Amd 2:2021)
UNE-EN 16929:2019 Test Methods - Timber floors - Determination of vibration properties
UNE-EN 60068-2-65:2013 Environmental testing - Part 2-65: Tests - Test Fg: Vibration - Acoustically induced method (Endorsed by AENOR in August of 2013.)

AIA/NAS - Aerospace Industries Association of America Inc.

NAS3354-1963 Fixtures - Vibration Test - Self-Locking Nuts
NASM1312-7-1997 Fasteners Test Methods; Method 7 Vibration

Institute of Environmental Sciences and Technology

IEST RP-DTE022.1-2014 Multi-shaker Test and Control

Danish Standards Foundation

DS/EN ISO 8041-2:2021 Human response to vibration – Measuring instrumentation – Part 2: Personal vibration exposure meters (ISO 8041-2:2021)
DS/EN 1032+A1:2009 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value

International Organization for Standardization (ISO)

ISO 20283-2:2008 Mechanical vibration - Measurement of vibration on ships - Part 2: Measurement of structural vibration
ISO/TR 27609:2007 Vibration in hand-held tools — Vibration measurement methods for grinders — Evaluation of round-robin test

CH-SNV

SN EN ISO 8041-2:2021 Human response to vibration - Measuring instrumentation - Part 2: Personal vibration exposure meters (ISO 8041-2:2021)
SN EN ISO 6721-3:2021 Plastics - Determination of dynamic mechanical properties - Part 3: Flexural vibration - Resonance-curve method (ISO 6721-3:2021)

United States Navy

NAVY MIL-STD-2225-1994 VIBRATION AND NOISE TESTING FOR INSTRUMENT BEARINGS

RO-ASRO

STAS 7536-1971 ELECTRICAL ROTATING MACHINES Methods for measuring the vibration level

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NAS 3354-1963 Fixtures - Vibration Test - Self-Locking Nuts

American Society for Testing and Materials (ASTM)

ASTM D999-08 Standard Test Methods for Vibration Testing of Shipping Containers
ASTM D999-07 Standard Test Methods for Vibration Testing of Shipping Containers

HU-MSZT

MSZ 18163/2-1983 Examination of vibration testing Environmental vibration affects residents of people, tourist resorts and public buildings

PT-IPQ

NP EN ISO 10819:2001 Mechanical vibration and shock Hand-arm vibration Method for the measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand(ISO 10819:1996)

National Aeronautics and Space Administration (NASA)

NASA-STD-7001-1996 PAYLOAD VIBROACOUSTIC TEST CRITERIA

Others: iso vibration,iso vibration,vibration test,iso vibration test,Sinusoidal vibration test,Vibration Testing Technology,Vibration test frequency,vibration test,Which vibration tests,Vibration Test Conditions,Equipment Vibration Test,Mechanical Vibration Test,Equipment Vibration Test,Machine Vibration Test,Vibration Test Comparison,Vibration Test System,Where is the vibration test,Vibration Test Table,vibration iso