Internal standard adder

Internal standard adder, Total:135 items.

The international standard classification for "Internal standard adder" includes: Internal combustion engines , Electric heaters , Construction equipment , Radio receivers , Chemical analysis of metals , Anaesthetic, respiratory and reanimation equipment , Ambient atmospheres .

The Chinese standard classification for "Internal standard adder" includes: Cooling system and heating equipment , Household electric heating appliances , Architectural engineering construction machinery , Broadcasting and television equipment in general , Precious metals and its alloy analysis method , Surgery devices , Environmental sanitation , Communication network technical system .

未注明发布机构

AS 4553:2008(R2011) Gas space heating appliances
JEDEC JESD318-2023 Compression Attached Memory Module (CAMM2) Common Standard
XP C32-321 Insulated cables and cords for installation. Heaters with metal coatings embedded in the walls of buildings and heated by heating cables

Professional Standard - Machinery

JB/T 8127-2011 Internal combustion engines — Fuel heaters

Professional Standard - Light Industry

QB/T 4703-2014 Thermal Storage Room Heaters

Group Standards of the People's Republic of China

T/NAIA 0278-2024 Determination of soil available molybdenum Standard addition method
T/CAB 0191-2022 Green Product Assessment——Room Heaters
T/ZGIA 102-2019 Graphene Composite Indoor Heater

Taiwan Provincial Standard of the People's Republic of China

CNS 5507-1982 Rolling Bearings Bearing with Spherical Outside Surface and Extended Inner Ring Width, Insert BEARING

Professional Standard - Construction Industry

JG/T 46-1999 Electric motor in internal concrete vibrators

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 25934.2-2010 Methods for chemical analysis of high purity gold - Part 2: Inductively coupled plasma mass spectrometry standard enter emendation-inner standard method - Determination of impurity
GB/T 1584-1979 Standard for insertion test signal of domestic TV

Professional Standard - Nuclear Industry

EJ/T 682-1992 Standard Format and Content of Particle Accelerator Facility Safety Analysis Report

国家药监局

YY/T 0663.1-2021 Cardiovascular implants—Endovascular devices—Part 1:Endovascular prostheses

Professional Standard - Agriculture

213兽药质量标准汇编(2006至2011年)-2012 Domestic veterinary drug standard oxytetracycline uterine injection

Professional Standard - Medicine

YY 1107-2003 Buoy type oxygen inhalator

中华人民共和国国家卫生和计划生育委员会

GB/T 17095-1997 Hygienic standard for inhalable particulate matter in indoor air

Professional Standard - Post and Telecommunication

YDN 061-1997 Technical System of Access Network (Tentative Specifications)

Japanese Industrial Standards Committee (JISC)

JIS Q 0064:2014 Guide for addressing environmental issues in product standards
JIS Q 0064:1998 Guide for the inclusion of environmental aspects in product standards

BR-ABNT

ABNT PB-620-1979 Tank train. Internal heating coil entrance and exit

SCC

CSA ANSI Z21.11.2-2002 Gas-Fired Room Heaters - Volume II, Unvented Room Heaters
UL Subject 647-1999 Standard for Unvented Kerosene-Fired Room Heaters and Portable Heaters (Bulletin, 2/25/1999)
AENOR UNE-EN 14829:2008 Independent gas-fired flueless space heaters for nominal heat input not exceeding 6 kW
AENOR UNE 20357/1C:1979 PORTABLE IMMERSION HEATERS. SECURITY CONDITIONS
AENOR UNE 20357:1974 PORTABLE IMMERSION HEATERS. SECURITY CONDITIONS
MIL MIL-C-36699A-1979 CATHETER AND CONNECTOR, SUCTION, ENDOTRACHEAL (S/S BY A-A-0051713)
BS DD 244:1998 Code of practice for wire-free interconnections within intruder alarms
UL Subject 1482-2015 Standard for Solid-Fuel Type Room Heaters (CSDS Proposal, 5/15/2015)
DANSK DS/EN 16510-2-6:2023 Residential solid fuel burning appliances – Part 2-6: Mechanically by wood pellets fed roomheaters, inset appliances and cookers
BS 1556:1949 Electric immersion heaters for domestic hot water supply
BS 3456-A8:1963 Specification for the testing and approval of household electrical appliances. Electric immersion heaters
BS 3456-A8:1961 Specification for the testing and approval of household electrical appliances. Electric immersion heaters
NS-EN 14829:2007 Independent gas-fired flueless space heaters for nominal heat input not exceeding 6 kW
DANSK DS/EN 14829:2007 Independent gas-fired flueless space heaters for nominal heat input not exceeding 6 kW

Association Francaise de Normalisation

NF S91-157*NF EN ISO 14801:2016 Dentistry - Implants - Dynamic loading test for endosseous dental implants
XP C32-322-2014 INSULATED CABLES AND FLEXIBLE CORDS FOR INSTALLATIONS. HEATING EQUIPMENT BY MEANS OF HEATING CABLES, WITH METALLIC COVERING FOR EMBEDDING INTO WALLS OF BUILDINGS.
XP C32-111-2014 INSULATED CABLES AND FLEXIBLE CORDS FOR INSTALLATIONS. HEATING EQUIPMENT BY MEANS OF HEATING CABLES, WITH METALLIC COVERING FOR EMBEDDING INTO WALLS OF BUILDINGS.
XP C32-321-2014 INSULATED CABLES AND FLEXIBLE CORDS FOR INSTALLATIONS. HEATING EQUIPMENT BY MEANS OF HEATING CABLES, WITH METALLIC COVERING FOR EMBEDDING INTO WALLS OF BUILDINGS.
XP C32-330-1996 INSULATED CABLES AND FLEXIBLE CORDS FOR INSTALLATIONS. HEATING EQUIPMENT BY MEANS OF HEATING CABLES, WITH METALLIC COVERING FOR EMBEDDING INTO WALLS OF BUILDINGS.
NF C56-465:2009 Gas appliances - Fuel cell gas heating appliance - Fuel cell gas heating appliance of nominal heat input inferior or equal to 70 kW.

HU-MSZT

MNOSZ 280-1953 Add instrument driven vehicles
MSZ 14020/2-1983 Rule container. Internal loading length

CZ-CSN

CSN 36 1222-1971 Portable immersion lieaters
CSN 36 1350-1985 Particular requirements for immersion heaters

Standard Association of Australia （SAA）

AS 4553:2008 Gas space heating appliances
AS/NZS 3103:1993 Approval and test specification - Electric room heaters

American National Standards Institute （ANSI)

ANSI Z21.11.2-2011 Standard for Gas-Fired Room Heaters, Volume II, Unvented Room Heaters
ANSI/UL 2021-2013 Standard for Safety for Fixed and Location-Dedicated Electric Room Heaters
ANSI/UL 2021a-2013 Standard for Safety for Fixed and Location-Dedicated Electric Room Heaters
ANSI N42.38-2006 Performance Criteria for Spectroscopy-Based Portal Monitors used for Homeland Security

Canadian Standards Association (CSA)

CSA/AM ANSI Z21.11.2-2007 Gas-Fired Room Heaters Volume II, Unvented Room Heaters Twenty-Fifth Edition

SAE - SAE International

SAE ARP266-1952 Installation@ Heaters@ Airplane@ Internal Combustion Heater Exchanger Type
SAE ARP266A-2001 Installation@ Heaters@ Airplane@ Internal Combustion Heater Exchanger Type
SAE AS143C-1966 HEATERS@ AIRCRAFT@ INTERNAL COMBUSTION HEAT EXCHANGER TYPE
SAE AS143B-1949 HEATERS@ AIRPLANE@ INTERNAL COMBUSTION HEAT EXCHANGER TYPE

Society of Automotive Engineers (SAE)

SAE ARP266-1996 INSTALLATION, HEATERS, AIRPLANE, INTERNAL COMBUSTION HEATER EXCHANGER TYPE
SAE AS8040A-1996 Heater, Aircraft Internal Combustion Heat Exchanger Type
SAE AS8040A-2008 Heater, Aircraft Internal Combustion Heat Exchanger Type
SAE AS8040-1988 HEATER, AIRCRAFT INTERNAL COMBUSTION HEAT EXCHANGER TYPE
SAE AS143C-1992 Heaters, Aircraft, Internal Combustion Heat Exchanger Type
SAE AS3266-1-1950 AS3266 Inner Gauze – Strainer - Filter Fuel. Type 'B'
SAE AS8040C-2019 Heater and Accessories, Aircraft Internal Combustion Heat Exchanger Type
SAE ARP86C-2011 Heater, Airplane, Engine Exhaust Gas to Air Heat Exchanger Type

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE OR-16-C057-2016 Getting Heat Pump Water Heaters Into California

ZA-SABS

SABS 185-1996 Immersion-type heating units for electrical appliances

German Institute for Standardization

DIN EN 1266:2003 Independent gas-fired convection heaters incorporating a fan to assist transportation of combustion air and/or flue gases; German version EN 1266:2002
DIN EN 50465:2009 Gas appliances - Fuel cell gas heating appliances - Fuel cell gas heating appliance of nominal heat input inferior or equal to 70 kW; German version EN 50465:2008
DIN EN 14829:2007-11 Independent gas-fired flueless space heaters for nominal heat input not exceeding 6 kW; German version EN 14829:2007
DIN EN 14829 Berichtigung 1:2010-07 Independent gas-fired flueless space heaters for nominal heat input not exceeding 6 kW; German version EN 14829:2007, Corrigendum to DIN EN 14829:2007-11
DIN 44576-4:1987 Electric room heating; thermal storage floor heating; characteristics of performance; calculation for room heating
DIN EN 16510-2-6:2023-02 Residential solid fuel burning appliances - Part 2-6: Mechanically by wood pellets fed roomheaters, inset appliances and cookers; German version EN 16510-2-6:2022 / Note: DIN EN 14785 (2006-09) and DIN EN 14785 Berichtigung 1 (2007-10) remain valid alo...
DIN 44576-3:1987 Electric room heating; thermal storage floor heating; characteristics of performance; requirements

Underwriters Laboratories (UL)

UL 2021 BULLETIN-2006 UL Standard for Safety Fixed and Location-Dedicated Electric Room Heaters
UL 2021 BULLETIN-2015 UL Standard for Safety Fixed and Location-Dedicated Electric Room Heaters
UL 2021-2015 UL Standard for Safety Fixed and Location-Dedicated Electric Room Heaters (Fourth Edition)

American Society for Testing and Materials (ASTM)

ASTM E1509-12(2017) Standard Specification for Room Heaters, Pellet Fuel-Burning Type
ASTM D5810-96(2021) Standard Guide for Spiking into Aqueous Samples
ASTM B903-15(2022) Standard Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement
ASTM B91-97(2004) Standard Specification for Magnesium-Alloy Forgings
ASTM B919-19 Standard Specification for Welded Copper Heat Exchanger Tubes With Internal Enhancement
ASTM D4334-99 Standard Test Method for the Determination of the Dip Tube Retention of a Mechanical Pump Dispenser
ASTM B903-10 Standard Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement
ASTM D5788-95(2005) Standard Guide for Spiking Organics into Aqueous Samples
ASTM D5788-95(2024) Standard Guide for Spiking Organics into Aqueous Samples
ASTM D5788-95(2017) Standard Guide for Spiking Organics into Aqueous Samples

RTCA - RTCA@ Inc.

RTCA DO-370 SUPP-2017 DO-370 Supplement - Algorithm Inputs ((Zip File) Access to Additional Content)

British Standards Institution (BSI)

BS EN 16510-2-6:2022 Residential solid fuel burning appliances - Mechanically by wood pellets fed roomheaters, inset appliances and cookers
BS EN 50465:2008 Gas appliances - Fuel cell gas heating appliance - Fuel cell gas heating appliance of nominal heat input inferior or equal to 70 kW
BS EN ISO 25539-3:2011 Cardiovascular implants. Endovascular devices. Vena cava filters
BS EN ISO 25539-3:2012 Cardiovascular implants. Endovascular devices. Vena cava filters
BS ISO 8600-4:2014 Endoscopes. Medical endoscopes and endotherapy devices. Determination of maximum width of insertion portion
BS EN ISO 11979-4:2008+A1:2012 Ophthalmic implants. Intraocular lenses. Labelling and information
BS EN ISO 11979-4:2008 Ophthalmic implants - Intraocular lenses - Labelling and information
BS EN ISO 11979-4+A1:2009 Ophthalmic implants. Intraocular lenses. Labelling and information
BS EN ISO 11979-4:2009 Ophthalmic implants. Intraocular lenses. Labelling and information
BS EN ISO 25539-2:2012 Cardiovascular implants. Endovascular devices. Vascular stents
BS EN ISO 25539-2:2010 Cardiovascular implants. Endovascular devices. Vascular stents
BS EN ISO 25539-2:2009 Cardiovascular implants - Endovascular devices - Vascular stents
BS EN ISO 25539-2:2008 Cardiovascular implants - Endovascular devices - Vascular stents

IETF - Internet Engineering Task Force

RFC 3911-2004 "The Session Initiation Protocol (SIP) ""Join"" Header"

IT-UNI

UNI 2668-1944 Oiler for internal press parts
UNI 5375-1964 Railway rolling stock. Profiles of the internal surface of finished treads for wheels with inserted treads.

VN-TCVN

TCVN 6844-2001 Guide for the inclusion of safety aspects in standards

RO-ASRO

STAS 10213-1982 Aircraft GRAVITY FILLING ORIFICES Inner diameters
STAS 8001-1972 PORTABLE IMMERSION HEATERS Special requirements

AT-ON

ONORM M 7520-1977 Room-heating appliances for solid fuels
ONORM M 7440 Teil.3-1983 Domestic gas cooking appliances; gas ranges with built-in space heater.
ONORM M 7512-1978 Heat rating of room heaters; plate radiators made of steel

Korean Agency for Technology and Standards (KATS)

KS B 8125-2018 Movable butane gas space heaters incorporated cylinder
KS P ISO TR 18130:2019 Dentistry — Screw loosening test using cyclic torsional loading for implant body/implant abutment connection of endosseous dental implants
KS B 6878-2011(2016) Cabinet heater cylinders for liquefied butane gas
KS P ISO 25539-1:2017 Cardiovascular implants — Endovascular devices — Part 1: Endovascular prostheses
KS P ISO 25539-1:2010 Cardiovascular implants－Endovascular devices－Part 1：Endovascular prostheses
KS C IEC 60594:2003 Internal fuses and internal overpressure disconnectors for capacitors for inductive heat generating plants

VE-FONDONORMA

NORVEN 46-1972 Venezuelan coffee processing standards

KR-KS

KS P ISO TR 18130-2019 Dentistry — Screw loosening test using cyclic torsional loading for implant body/implant abutment connection of endosseous dental implants

RU-GOST R

GOST 631-1975 Internal-external upset drill pipes and couplings for them. Specifications

Danish Standards Foundation

DS/EN 50465:2009 Gas appliances - Fuel cell gas heating appliances - Fuel cell gas heating appliance of nominal heat input inferior or equal to 70 kW
DS/EN 14829:2007 Independent gas-fired flueless space heaters for nominal heat input not exceeding 6 kW

Lithuanian Standards Office

LST EN 50465-2008 Gas appliances - Fuel cell gas heating appliances - Fuel cell gas heating appliance of nominal heat input inferior or equal to 70 kW
LST EN 14829-2007 Independent gas-fired flueless space heaters for nominal heat input not exceeding 6 kW

CENELEC - European Committee for Electrotechnical Standardization

EN 50465:2008 Gas appliances - Fuel cell gas heating appliances - Fuel cell gas heating appliance of nominal heat input inferior or equal to 70 kW

European Committee for Standardization (CEN)

HD 262 S1-1976 Particular specifications for portable immersion heaters
EN ISO 25539-1:2017 Cardiovascular implants - Endovascular devices - Part 1: Endovascular prostheses
EN 16510-2-6:2022 Residential solid fuel burning appliances - Part 2-6: Mechanically by wood pellets fed roomheaters, inset appliances and cookers

International Organization for Standardization (ISO)

ISO 25539-1:2003 Cardiovascular implants — Endovascular devicesPart 1:Endovascular prostheses
ISO 25539-1:2017 Cardiovascular implants - Endovascular devices - Part 1: Endovascular prostheses

AENOR

EA 0036:2009 Performance of direct action room heaters.
UNE-EN 14829:2008 Independent gas-fired flueless space heaters for nominal heat input not exceeding 6 kW

ES-UNE

UNE-EN 16510-2-6:2023 Residential solid fuel burning appliances - Part 2-6: Mechanically by wood pellets fed roomheaters, inset appliances and cookers

European Committee for Electrotechnical Standardization（CENELEC）

HD 262-1977 Particular Specification for Portable Immersion Heaters
HD 262.2-1978 Particular Specification for Portable Immersion Heaters
HD 262 S1-1975 Particular Specification for Portable Immersion Heaters
HD 262.4 S1-1990 Particular Specification for Portable Immersion Heaters