basket pulp method

basket pulp method, Total:104 items.

The international standard classification for "basket pulp method" includes: Sports equipment and facilities , Pulps , Sports equipment and facilities in general , Fuels , Paper and board , Equipment for the paper industry .

The Chinese standard classification for "basket pulp method" includes: Architectural engineering construction machinery , Sports goods , Papermaking in general , Paper pulp and paperboard , Coal analysis methods , Paper manufacturing machinery in general .

Taiwan Provincial Standard of the People's Republic of China

CNS 6261-1980 Method of Test for Basket for Bicycles & Motor - Cycles
CNS 12495-1992 Laboratory Beating of Pulp (Beater Method)
CNS 13394-1994 Method of Test for Viscosity of Pulp (Falling BBall Method)
CNS 10863-1994 Method of Test for Consistency of Pulp Suspensions

Professional Standard - Construction Industry

JG/T 5025-1992 Suspended powered platforms for work at heights. Testing method of performance

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 12659-2008 Pulps - Laboratory beating Jokro mill method
GB/T 18856.1-2002 Test methods for quality of coal water mixture-Part 1-Sampling for coal water mixture
GB/T 3332-1982 Determination of beating degree for pulps (Schopper-Riegler method)
GB/T 12659-1990 Pulps－Laboratory beating－Jokro mill method
GB/T 14625.2-1993 Basketball, football, volleyball, handball. The measurement of bouncing altitude
GB/T 8944.1-1988 Pulps - Determination of saleable mass in lots Part 1:Pulp baled in sheet form
GB/T 29287-2012 Pulps—Laboratory beating—PFI mill method
GB/T 14625.1-1993 Basketball, football, volleyball, handball. The measurement of roundness
GB/T 24325-2009 Pulps—Laboratory beating—Valley beater method
GB/T 14625.2-2008 Test methods for basketball, football, volleyball and handball - Part 2: Measurement of bouncing altitude
GB/T 14625.1-2008 Test methods for basketball, football, volleyball and handball - Part 1: Measurement of roundness
GB/T 14625.3-1993 Basketball, football, volleyball, handball. The determination of resistance to shock

Professional Standard - Light Industry

QB/T 1698-1993 Pulp Pumps - Test Means
QB/T 1463-1992 Pulps Laboratory Beating PFI Mill Method
QB/T 3702-1999 Pulps--Laboratory beating--Valley beater method
QB/T 1463-2010 Pulps Laboratory bearting PFI mill method
QB/T 1698-2006 Pulp pump-Test means

Group Standards of the People's Republic of China

T/CAS 711-2023 Technical requirements and test methods for ancient soymilk function of soymilk maker

Henan Provincial Standard of the People's Republic of China

DB41/T 1110-2015 Ultrasonic Processed Poplar Pulp

Professional Standard - Chemical Industry

HG 2558-1994 Slurry method diammonium phosphate

Spanish Association for Standardization (UNE)

UNE 11-018-1990 cradle. experiment method
UNE 57024:1986 PULPS. BEATING BY THE LAMPEN MILL METHOD
UNE-EN 1130-2:1996 FURNITURE. CRIBS AND CRADLES FOR DOMESTIC USE. PART 2: TEST METHODS.

SCC

CAN/ULC-S129-2006 STANDARD METHOD OF TEST FOR SMOULDER RESISTANCE OF INSULATION (BASKET METHOD)
ULC-S129-1995(R2001) Standard Method of Test for Smoulder Resistance of Insulation (Basket Method)
ULC S129-1995(R2001) Standard Method Of Test For Smoulder Resistance Of Insulation (Basket Method)
BS 5878:1980 Method for determination of stock concentration of pulps (rapid method)
ULC 129-2015 Standard Method Of Test For Smoulder Resistance Of Insulation (Basket Method) (CAN/ULC S129-15)
CAN/CGSB-9.0 No.10-1996 Methods of Testing Pulp and Paper The Laboratory Beating of Pulp (Valley Beater Method)
CAN/ULC-S129-M86-1986 Standard Method of Test for Smoulder Resistance of Loose Fill Insulation (Basket Method)
BS EN 25264-2:1994 Pulps. Laboratory beating-PFI mill method
BS EN 25264-3:1994 Pulps. Laboratory beating-Jokro mill method
BS EN ISO 5264-2:2002 Pulps. Laboratory beating-PFI mill method
BS 4551:1980 Methods of testing mortars, screeds and plasters
CAN/CGSB 9.0 No.10-1996 Pulp and Paper Testing Methods - Laboratory Pulp Refining (Valley Pile Method)
CAN/CGSB 9.0 No.3-1992 Pulp and Paper Test Methods - Pulp Concentration
DIN 7899 E:2018 Draft Document - Playing field equipment - Basketball equipment - Requirements and test methods
ULC Subject 129-2015 STANDARD METHOD OF TEST FOR SMOULDER RESISTANCE OF INSULATION (BASKET METHOD) (Bulletin, 8/18/2015)

Underwriter Laboratories of Canada (ULC)

CAN/ULC-S129-15 STANDARD METHOD OF TEST FOR SMOULDER RESISTANCE OF INSULATION (BASKET METHOD)

Canadian General Standards Board （CGSB)

CGSB 9.0 NO. 10-96-CAN/CGSB-1996 Pulp and Paper Testing Methods Laboratory Pulp Refining (Pile Valley Method)

Indonesia Standards

SNI 0404-2013 Textile - Fabrics - Determination of water absorbency (basket method)
SNI ISO 5264-1:2011 Pulps - Laboratory beating - Part 1: Valley beater method
SNI 1030-2009 Pulp. Sampling methods
SNI 14-1522-1989 Cara uji fraksionari serat pulp (metode mcnelt)

American Society for Testing and Materials (ASTM)

ASTM F2821-15 Standard Test Methods for Basket Type Rescue Litters
ASTM F2821-15(2020) Standard Test Methods for Basket Type Rescue Litters

YU-JUS

JUS H.N8.143-1988 Pulps. Laborator/ beating. Valley beater method

British Standards Institution (BSI)

BS EN 1130-2:1996 Furniture - Cribs and cradles for domestic use - Test methods
BS EN ISO 5264-2:2011 Pulps. Laboratory beating. PFI mill method

Standard Association of Australia （SAA）

AS 1301.215:2019 Methods of test for pulp paper, Method 215: Pulps — Laboratory wet disintegration — Disintegration of mechanical pulps at ≥ 85 °C
AS 1301.220:2024 Methods of test for pulp and paper, Method 220: Test method for repulpability
AS 1301.P206M:1977 Methods of test for pulp and paper, Method P206M: Freeness of pulp
AS 1301.P209TS:1975 Methods of test for pulp and paper, Method P209TS: Laboratory processing of pulp - PFI mill method
AS 1301.P207S:1979 Methods of test for pulp and paper, Method P207S: Determination of stock concentration
AS 1301.P209RP:1982 Methods of test for pulp and paper, Method P209RP: Laboratory processing of pulp - PFI mill method
AS 2701.10:1984 Methods of sampling and testing mortar for masonry construction, Method 10: Methods for chemical analysis of mortars
AS P1.206M:1961 Methods of test for pulp and paper - Freeness of pulp
AS P1.P202M:1963 Methods of test for pulp and paper - Laboratory processing of pulp - Lampen mill method
AS P1.P206M:1961 Methods of test for pulp and paper - Freeness of pulp

Korean Agency for Technology and Standards (KATS)

KS M 7036-1995 Laboratory processing of pulp(Beater method)
KS M 7036-2007 LABORATORY PROCESSING OF PULP (BEATER METHOD)
KS M ISO 5264-1:2021 Pulps — Laboratory beating — Part 1: Valley beater method
KS M ISO 5264-1:2006 Pulps-Laboratory beating-Part 1:Valley beater method
KS M ISO 5264-1:2016 Pulps－Laboratory beating－Part 1：Valley beater method
KS F 2432-2019 Standard test method for consistency of grouting mortar
KS M ISO 5264-3-2008 Pulps－Laboratory beating－Part 3：Jokro mill method
KS M 7024-1995 Testing method for beating degree and freeness of pulp
KS M ISO 5264-2:2020 Pulps — Laboratory beating — Part 2: PFI mill method
KS M 7070-2008 Testing method for dissolving pulp

BE-NBN

NBN B 14-205-1972 Mortar test, laitance. straw method
NBN B 14-204-1972 Lime slurry trial, floating slurry, carbon tetrachloride method

CZ-CSN

CSN ISO 4119:1993 Pulps. Determination of stock concentration (Rapid method)
CSN ISO 5264-1:1993 Pulps - Laboratory beating - Part 1: Valley beater method
CSN ISO 5264-3:1993 Pulps. Laboratory beating. Part 3: Jokro mill method
CSN ISO 5264-2:1994 Pulps. Laboratory beating. Part 2: PEI mill method

German Institute for Standardization

DIN 54360:2004-07 Pulps - Laboratory beating - Jokro mill method
DIN 54360:2004 Pulps - Laboratory beating - Jokro mill method

Japanese Industrial Standards Committee (JISC)

JIS P 8221-1:1998 Pulps -- Laboratory beating -- Part 1: Beater method
JIS P 8101:1994 Testing method for dissolving pulp

American National Standards Institute （ANSI)

ANSI/TAPPI T200 sp-2010 Laboratory beating of pulp (Valley beater method)

Danish Standards Foundation

DS/EN 25264-2:1994 Pulps-Laboratory beating-Part 2:PFI mill method
DS/EN 25264-3:1994 Pulps-Laboratory beating-Part 3:Jokro mill method
DS/EN 1130-2:1997 Furniture - Cribs and cradles for domestic use - Part 2: Test methods

Association Francaise de Normalisation

NF Q50-008-1*NF ISO 5264-1:1994 Pulps. Laboratory beating. Part 1 : valley beater method.
NF EN 1130:2019 Childcare furniture - Cradles - Safety requirements and test methods
NF Q50-008-2*NF EN ISO 5264-2:2011 Pulps - Laboratory beating - Part 2 : PFI mill method