Sign In |Help & Support
ALL SECTORS
  • ALL SECTORS
  • GB(National Standard)
  • CB(Shipping)
  • CECS(Engineering Construction)
  • CJ(Urban Construction)
  • CY(News and Publication)
  • DB(Provincial Standard)
  • DL(Electricity & Power)
  • DZ(Geology & Mineralogy)
  • FZ(Spinning & Textile)
  • GA(Public Security)
  • HB(Aviation)
  • HG(Chemical Industry)
  • HJ(Environmental Protection)
  • JB(Machinery)
  • JC(Building Materials)
  • JG(Building & Construction)
  • JJ(Metering)
  • JT(Highway & Transportation)
  • LY(Forestry)
  • MT(Coal)
  • NB(Energy)
  • NY(Agriculture)
  • QB(Light Industry)
  • QC(Automobile & Vehicle)
  • QJ(Aerospace)
  • SH(Petrochemical)
  • SJ(Electronics)
  • SL(Water Resources)
  • SN(Commodity Inspection)
  • SY(Oil & Gas)
  • TB(Railway & Train)
  • YB(Ferrous Metallurgy)
  • YC(Tobacco)
  • YD(Telecommunication)
  • YY(Medical Device)
Database: 365,228(8 Aug 2026)

battery fuel gauge

battery fuel gauge, Total:276 items.

The international standard classification for "battery fuel gauge" includes: Commercial vehicles in general , Primary cells and batteries , Semiconducting materials , Galvanic cells and batteries .

The Chinese standard classification for "battery fuel gauge" includes: New energy vehicle and other automobiles , Electrochemical power source , Elemental semiconductor material , Solar energy , Energy equipment for spacecraft , Physical power source .


未注明发布机构

  • DIN 19261 E:2015-06 pH measurement - Measuring methods with potentiometric cells - Terms and definitions
  • DIN 40736-1 E:2012-10 Lead acid batteries; stationary cells with positive tubular plates; cells in plastic-containers; rated capacities, main dimensions, weights
  • DIN 40737-3 E:2012-10 Lead acid batteries - Stationary batteries with positive tubular plates - Part 3: Vented batteries in plastic-monobloc-containers; rated capacities, main dimensions, weights
  • DIN 19261:1971 pH measurement - Measuring methods with potentiometric cells - Terms and definitions
  • SAE J2719-201511 Hydrogen Fuel Quality for Fuel Cell Vehicles

Professional Standard - Machinery

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

  • GB/T 35178-2017 Fuel cell electric vehicles―Hydrogen consumption―Test methods

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

  • GB/T 20155-2006 Determination of mercury, cadmium and lead in battery
  • GB/T 38200-2019(英文版) Solar Cell Quantum Efficiency Test Method
  • GB/T 31854-2015 Test method for measuring metallic impurities content in silicon materials used for photovoltaic applications by inductively coupled plasma mass spectrometry
  • GB/T 29849-2013 Test method for measuring surface metallic contamination of silicon materials used for photovoltaic applications by inductively coupled plasma mass spectrometry
  • GB/T 29850-2013 Test method for measuring compensation degree of silicon materials used for photovoltaic applications
  • GB/T 43252-2023 Test methods of energy consumption and range for fuel cell electric vehicles
  • GB/T 43695-2024 Energy conversion efficiency requirements and measurement methods for lithium ion cells and batteries
  • GB/T 20155-2018 Determination of mercury,cadmium and lead in battery
  • GB/T 6494-2017(英文版) Measurement method for electrical characteristics of aerospace solar cells

国家市场监督管理总局、中国国家标准化管理委员会

工业和信息化部

  • SJ/T 11795-2022 Test method for determining magnetic impurity content of electrode materials in lithium ion batteries
  • SJ/T 11760-2020 Test method for determining eflctivity on textured surface of photovoltaic cell-photoelectric integrating
  • HG/T 5545-2019 Determination of nickel content in waste lithium ion battery materials.

Guangdong Provincial Standard of the People's Republic of China

  • DB44/T 1485-2014 Test method for energy consumption of fuel cell electric vehicles

Professional Standard - Electron

Group Standards of the People's Republic of China

  • T/CIAPS 0017-2022 Traction Battery Caused Hazard Quantitative Rating
  • T/ZZB 2721-2022 Lithium-ion battery pneumatic ULV sprayer
  • T/CSAE 327.3-2023 General specification for the quality of power battery products for electric vehicles—Part 3:Power battery module
  • T/DCB 002-2023 Calculation method of scrap amount of used power batteries
  • T/GDBIA 05-2023 Quality grade classification evaluation of battery for electric bicycle
  • T/CPIA 0045-2022 Guidelines for production line measurements of crystalline silicon solarcells current--Voltage characteristics
  • T/CSAE 327.2-2023 General specification for the quality of power battery products for electric vehicles—Part 2:Power battery cell
  • T/CPIA 0033-2022 Technical Requirements for Photovoltaic Cell Quantum Efficiency Test System
  • T/ZHFCA 1002-2023 Impedance measurement method for proton exchange membrane fuel cell
  • T/CSAE 327.4-2023 General specification for the quality of power battery products for electric vehicles—Part 4:Power battery system
  • T/CPIA 0032-2022 Measurement method of current-voltage (IV) characteristics of perovskite photovoltaic cells and modules
  • T/GDCKCJH 032-2021 Capacitance attenuation test method of power battery module for electric vehicle in cyclic compound working condition
  • T/CSTE 0566-2024 Assessment requirements for quality grading and forerunner — lithium ion cells and batteries used in portable electronic equipments
  • T/GDCKCJH 020-2020 Test methods for energy efficiency and power estimation of traction battery of electric vehicle under compound dynamic conditions
  • T/SPSTS 044-2023 Quality requirements for recycled lithium-ion battery materials

Professional Standard - Energy

  • NB/T 20028.1-2010 The Batteries Used in Nuclear Power Plants - Part 1: Recommended Practice for Sizing
  • NB/T 20080-2012 Qualification of Class 1E Lead Storage Batteries for Nuclear Power Plants

Professional Standard - Nuclear Industry

  • EJ/T 573-1991 Quality Appraisal of Safety Grade Batteries in Nuclear Power Plants
  • EJ/T 525.1-2002 The vented lead-acid batteries used in nuclear power plants Part 1: Recommended practice for sizing
  • EJ/T 641-1992 Determination of capacity of large lead-acid battery in nuclear power plant

Professional Standard - Agriculture

  • GB/T 14009-1992 Measurement procedures for parameters of solar cell modules

Taiwan Provincial Standard of the People's Republic of China

Professional Standard - Light Industry

  • QB/T 2303.6-2008 Paste Coated Paper Separator for Batteries-part 6: Determination Moisture Content
  • QB/T 2303.9-2008 Paste Coated Paper Separator for Batteries-part 9: Determination of Mercury Content
  • QB/T 2303.3-2008 Paste Coated Paper Separator for Batteries-part 3: Determination of Base Paper Grammage
  • QB/T 2303.8-2008 Paste Coated Paper Separator for Batteries-part 8: Determination of Copper Content
  • QB/T 2303.5-2008 Paste Coated Paper Separator for Batteries-part 5: Determination of Paste Weight
  • QB/T 2303.7-2008 Paste Coated Paper Separator for Batteries-part 7: Determination of Iron Content

Guangxi Provincial Standard of the People's Republic of China

  • DB45/T 2109-2019 Volumetric method for determination of selenium content in copper indium gallium selenide solar photovoltaic cell target

Professional Standard - Navy

  • HJB 449.4-2009 Verification regulation for torpedo testing equipments of H/YZQ-006.Part 4:Power supplying battery charger of drilling torpedo

German Institute for Standardization

  • DIN 19261:2016 pH measurement - Measuring methods with potentiometric cells - Terms and definitions
  • DIN 19261:2005 pH measurement - Measuring methods with potentiometric cells - Terms and definitions
  • DIN 19261:2016-03 pH measurement - Measuring methods with potentiometric cells - Terms and definitions
  • DIN 40736-1:1992 Lead acid batteries; stationary cells with positive tubular plates; cells in plastic-containers; rated capacities, main dimensions, weights
  • DIN 43535:1998 Lead-acid batteries - Traction batteries 24 V with low-maintenance cells for industrial trucks - Dimensions, weights, electrical characteristics
  • DIN 43531:1998 Lead-acid batteries - Traction batteries 48 V for industrial trucks with low maintenance cells - Dimensions, weights, electrical characteristics
  • DIN 43536:1998 Lead-acid batteries - Traction batteries 80 V for industrial trucks with low maintenance cells - Dimensions, weights, electrical characteristics
  • DIN 58963-2:1983 Optical cells for photometric measurements; precision rectangular spectrophotometric cells; dimensions, requirements
  • DIN 40736-2:1992 Lead acid batteries; stationary cells with positive tubular plates; cells in hard-rubber containers; rated capacities, main dimensions, weights
  • DIN 40771-1:1981 Nickel-cadmium-accumulators; cells with pocket-type plates, cells in steel and plastic containers; rated capacities, main dimensions
  • DIN 40739:1999-07 Lead acid batteries - Stationary vented batteries with positive grid plates - Rated capacities, main dimensions, weights
  • DIN 40763-1:1988 Nickel-cadmium-batteries; cells with fibre structured plates; cells in plastic containers; nominal capacities, main dimensions
  • DIN 43590-1:1990 Lead-acid batteries; monobloc-batteries for starting internal combustion engines; main dimensions, voltages, weights
  • DIN 43590-1:1990-02 Lead-acid batteries; monobloc-batteries for starting internal combustion engines; main dimensions, voltages, weights
  • DIN 40734:1999 Lead acid batteries - Stationary vented cells with positive grid plates - Cells in plastic containers; rated capacities, main dimensions, weights
  • DIN 43598-1:1993-06 Lead-acid traction batteries 6 V and 12 V; monobloc batteries with tubular positive plates; nominal capacities, main dimensions, weights
  • DIN 43598-1:1993 Lead-acid traction batteries 6 V and 12 V; monobloc batteries with tubular positive plates; nominal capacities, main dimensions, weights
  • DIN 40738:1991 Lead storage batteries; stationary cells with positive plante plates, narrow plate distance; rated capacities, main dimensions
  • DIN 40741-1:1999-07 Lead-acid batteries - Stationary valve regulated batteries with positive grid plates and immobilized electrolyte for industrial application - Rated capacities, main dimensions, weights
  • DIN 41328-4:1974 Measurement of discharge capacity of electrolytic capacitors
  • DIN 41328-4:1974-06 Measurement of discharge capacity of electrolytic capacitors
  • DIN 40737-3:1999 Lead acid batteries - Stationary batteries with positive tubular plates - Part 3: Vented batteries in plastic-monobloc-containers; rated capacities, main dimensions, weights
  • DIN 40768:1969-09 Alkaline storage batteries; 6 V and 12 V sealed nickel-cadmium batteries, button cells with pasted plates, capacities, main dimensions, technical data

SE-SIS

British Standards Institution (BSI)

  • PD IEC TS 63202-3:2023 Photovoltaic cells. Measurement of current-voltage characteristics of bifacial photovoltaic cells
  • BS EN IEC 63202-1:2019 Photovoltaic cells - Measurement of light-induced degradation of crystalline silicon photovoltaic cells
  • PD IEC TS 63202-4:2022 Photovoltaic cells - Measurement of light and elevated temperature induced degradation of crystalline silicon photovoltaic cells
  • PD ISO/TR 11954:2008 Fuel cell road vehicles. Maximum speed measurement
  • BS ISO 20087:2016 Photography. Digital still cameras. Battery life measurement
  • PD IEC TS 63109:2022 Photovoltaic (PV) modules and cells. Measurement of diode ideality factor by quantitative analysis of electroluminescence images
  • BS IEC 62899-501-1:2019 Printed electronics - Quality assessment. Failure modes and mechanical testing. Flexible or bendable primary or secondary cells
  • BS ISO 23828:2013 Fuel cell road vehicles. Energy consumption measurement. Vehicles fuelled with compressed hydrogen
  • PD IEC 61340-2-2:2000 Electrostatics. Measurement methods. Measurement of chargeability
  • BS PAS 7062:2021 Electric vehicle battery cells. Health and safety, environmental and quality management considerations in cell manufacturing and finished cell. Code of practice

SCC

  • BS PD IEC TS 63202-3:2023 Photovoltaic cells-Measurement of current-voltage characteristics of bifacial photovoltaic cells
  • AENOR UNE 22504:1981 Accumulator batteries for mine locomotives with firedamp. Measurement of battery insulation resistance.
  • DANSK DS/IEC TS 63202-3 ED1:2023 Photovoltaic cells – Part 3: Measurement of current-voltage characteristics of bifacial photovoltaic cells
  • DANSK DS/ISO 20087:2016 Photography – Digital still cameras – Battery life measurement
  • CEI EN IEC 63202-1:2020 Photovoltaic cells Part 1: Measurement of light-induced degradation of crystalline silicon photovoltaic cells
  • AENOR UNE 58437:1991 Maintenance trucks. Electric forklifts. Measurements of traction battery elements.
  • DANSK DS/EN IEC 63202-1:2019 Photovoltaic cells – Part 1: Measurement of light-induced degradation of crystalline silicon photovoltaic cells
  • BS PD IEC TS 63202-4:2022 Photovoltaic cells-Measurement of light and elevated temperature induced degradation of crystalline silicon photovoltaic cells
  • BS PD ISO/TR 11954:2008 Fuel cell road vehicles. Maximum speed measurement
  • UNE 22504:1981 BATTERIES FOR MINING LOCOMOTIVES FOR MINES SUSCEPTIBLE TO FIREDAMP. MEASUREMENT OF THE BATTERY INSULATING RESISTENCE.
  • MIL MIL-M-24579A-1988 MEASURING SYSTEM, SUBMARINE STORAGE BATTERY CURRENT (METRIC) (SUPERSEDING MIL-M-24579)
  • DIN 19261 E:2015 Draft Document - pH measurement - Measuring methods with potentiometric cells - Terms and definitions
  • MIL MIL-PRF-49450/6B-1997 BATTERY, RECHARGEABLE, NICKEL-CADMIUM, VENTED, AIRCRAFT BB-716/A, LOW CAPACITY CELL (SUPERSEDING MIL-B-49450/6A)
  • BS PD IEC TS 63109:2022 Photovoltaic (PV) modules and cells. Measurement of diode ideality factor by quantitative analysis of electroluminescence images
  • MIL MIL-B-49450/6A-1988 BATTERY, RECHARGEABLE, NICKEL-CADMIUM, VENTED, AIRCRAFT, BB-716/A, LOW CAPACITY CELL (S/S BY MIL-PRF-49450/6B)
  • DIN 40744 E:2012 Draft Document - Lead acid batteries - Stationary valve regulated batteries with positive tubular plates and immobilized electrolyte (gel) - Rated capacities, main dimensions, weights
  • DIN 40742 E:2012 Draft Document - Lead acid batteries - Stationary valve regulated cells with positive tubular plates and immobilized electrolyte (gel) - Rated capacities, main dimensions, weights
  • DANSK DS/IEC TS 63202-4:2022 Photovoltaic cells – Part 4: Measurement of light and elevated temperature induced degradation of crystalline silicon photovoltaic cells
  • UNE 22502:1981 BATTERIES FOR MINING LOCOMOTIVES FOR MINES SUSCEPTIBLE TO FIREDAMP. MEASUREMENT OF THE TRAY INSULATING COATING AND OF BATTERY CONTAINERS.
  • JIS Q 9092:2022 Quality management systems -- Battery reuse -- Requirements
  • DANSK DS/IEC TS 63109:2022 Photovoltaic (PV) modules and cells – Measurement of diode ideality factor by quantitative analysis of electroluminescence images
  • DIN 40737-3 E:2012 Draft Document - Lead acid batteries - Part 3: Stationary vented batteries with positive tubular plates - Rated capacities, main dimensions, weights
  • BS PD IEC 61340-2-2:2000 Electrostatics. Measurement methods-Measurement of chargeability
  • BS IEC 62282-8-102:2019 Fuel cell technologies-Energy storage systems using fuel cell modules in reverse mode. Test procedures for the performance of single cells and stacks with proton exchange membranes, including reversible operation
  • VDI/VDE/DGQ/DKD 2622 BLATT 19:2015 Calibration of measuring instruments for electrical quantities — Characterization of RF measuring cables

SAE - SAE International

  • SAE J3042-2021 Measuring Properties of Li-Battery Electrolyte
  • SAE J3042-2015 Measuring Properties of Li-Battery Electrolyte
  • SAE AIR6202-2012 Test Cell Mass Fuel Flow Measurement Using Coriolis Flow Meters
  • SAE J1718-2008 Measurement of Hydrogen Gas Emission from Battery-Powered Passenger Cars and Light Trucks During Battery Charging
  • SAE J1718-1994 Measurement of Hydrogen Gas Emission from Battery-Powered Passenger Cars and Light Trucks During Battery Charging@ Recommended Practice (December 1994)
  • SAE J2719-2020 Information Report on the Development of a Hydrogen Quality Guideline for Fuel Cell Vehicles
  • SAE J2572-2014 Recommended Practice for Measuring Fuel Consumption and Range of Fuel Cell and Hybrid Fuel Cell Vehicles Fueled by Compressed Gaseous Hydrogen
  • SAE J1448-1984 Electromagnetic Susceptibility Measurements of Vehicle Components Using TEM Cells (14 kHz-200 MHz)

United States Navy

ES-AENOR

CU-NC

  • NC 64-01-1986 Batteries and Accumulators "Yara" Dry Eatteries Quality Specifications

YU-JUS

  • JUS N.J2.057-1982 Primary cells and batteries. Battery R20P. High povver categor/
  • JUS N.J2.056-1982 Primary cells and batteries. Battery R20C. High capacity category
  • JUS N.J2.052-1982 Primary cells and batteries. Battery R14C. High capacity category
  • JUS N.J2.049-1982 Primary cells and batteries. Battery R6C. High capacity category
  • JUS N.J2.053-1982 lis and batteries. Battery R14P. High power category
  • JUS N.J2.050-1982 Primar/ cells and batteries. Battery R6P. High povver category
  • JUS N.J3.721-1981 Lead-acid storage batteries. Starter batteries. General requirements, quality reguirements and test methods
  • JUS N.R1.101-1977 Electronic tubes. Measurements of the eletricalproperties. Measurement ofelectrode current

Defense Logistics Agency

PL-PKN

  • PN E83001-03-1987 Lead acid starter batteries Batteries of nomina? voltage 12 V Dimensions and capacities
  • PN E83001-02-1990 Lead-acid starter batteries Batteries of nomina? voltage 6 V Dimensions and capacities
  • PN E83006-03-1991 Lead-acid batteriesDimensions and capacities of batteries with pasted positive
  • PN E83006-02-1991 Lead-acid traction batteries Dimensions and capacities of batteries with tubular positives plates
  • PN T89200-16-1988 Dry cells an4 batteries Battery LR9

International Electrotechnical Commission (IEC)

  • IEC TS 63202-3:2023 Photovoltaic cells - Part 3: Measurement of current-voltage characteristics of bifacial photovoltaic cells
  • IEC 63202-1:2019 Photovoltaic cells - Part 1: Measurement of light-induced degradation of crystalline silicon photovoltaic cells
  • IEC TS 63202-4:2022 Photovoltaic cells - Part 4: Measurement of light and elevated temperature induced degradation of crystalline silicon photovoltaic cells
  • IEC TS 63109:2022 Photovoltaic (PV) modules and cells - Measurement of diode ideality factor by quantitative analysis of electroluminescence images

Society of Automotive Engineers (SAE)

  • SAE AIR6202-2017 Test Cell Mass Fuel Flow Measurement Using Coriolis Flow Meters
  • SAE J1718-1997 Measurement of Hydrogen Gas Emission from Battery-Powered passenger Cars and Light Trucks During Battery Charging
  • SAE J2719-2015 Hydrogen Fuel Quality for Fuel Cell Vehicles
  • SAE J2572-2008 Recommended Practice for Measuring Fuel Consumption and Range of Fuel Cell and Hybrid Fuel Cell Vehicles Fuelled by Compressed Gaseous Hydrogen
  • SAE J1448-1995 Electromagnetic Susceptibility Measurements of Vehicle Components Using Tem Cells (14 Khz-200 Mhz)
  • SAE J2719-2011 Hydrogen Fuel Quality for Fuel Cell Vehicles

RU-GOST R

  • GOST 1954-1982 Electromotive operating measures. Standard cells. General specifications
  • GOST R 8.877-2014 The state system of measurement assurance. Measures of electromotive force (standard cells) and measures of direct electrical voltage. Methods of verification
  • GOST 8.212-1984 State system for ensuring the uniformity of measurements. Measures of electromotive force. Standard cells. Calibration methods and facilities
  • GOST R IEC 61829-2013 Crystalline silicon photovoltaic batteries. On-site measurement of I-V characteristics
  • GOST 26692-1985 Vented alkaline nickel-cadmium rechargeable cells and storage batteries of capacity over 150 a h. General specification

GSO

  • GSO ISO 20087:2021 Photography — Digital still cameras — Battery life measurement
  • BH GSO ISO 20087:2022 Photography — Digital still cameras — Battery life measurement
  • GSO IEC 63202-1:2021 Photovoltaic cells - Part 1: Measurement of light-induced degradation of crystalline silicon photovoltaic cells
  • BH GSO IEC 63202-1:2022 Photovoltaic cells - Part 1: Measurement of light-induced degradation of crystalline silicon photovoltaic cells
  • OS GSO IEC 60306-3:2014 Measurement of photosensitive devices. Part 3: Methods of measurement of photoconductive cells for use in the visible spectrum
  • GSO IEC 60306-3:2014 Measurement of photosensitive devices. Part 3: Methods of measurement of photoconductive cells for use in the visible spectrum
  • BH GSO IEC 60306-3:2016 Measurement of photosensitive devices. Part 3: Methods of measurement of photoconductive cells for use in the visible spectrum
  • GSO 1471:2002 Methods of test for dry primary batteries .
  • BH GSO ISO 15387:2017 Space systems -- Single-junction solar cells -- Measurements and calibration procedures
  • GSO IEC/TR 62060:2014 Secondary cells and batteries - Monitoring of lead acid stationary batteries - User guide
  • GSO ISO 15387:2015 Space systems -- Single-junction solar cells -- Measurements and calibration procedures

Standard Association of Australia (SAA)

  • AS ISO 20087:2019 Photography — Digital still cameras — Battery life measurement

Korean Agency for Technology and Standards (KATS)

  • KS C 8532-2020 Measuring procedure of residual capacity for lead acid battery in photovoltaic system
  • KS C 8528-1995 Measuring method of output power for crystalline solar cells
  • KS C 8525-1995 Measuring methods of spectral response for crystalline solar cells
  • KS C 8538-2000(2020) Measuring method of output power for amorphous solar cells
  • KS C 8532-1995(2020) Measuring procedure of residual capacity for lead acid battery in photovoltaic system
  • KS C 8538-2020 Measuring method of output power for amorphous solar cells
  • KS C 8528-2020 Measuring method of output power for crystalline solar cells
  • KS C 8528-2005 Measuring method of output power for crystalline solar cells
  • KS C 8528-2005(2020) Measuring method of output power for crystalline solar cells
  • KS C 8526-1995 Measuring methods of output power crystalline solar cell modules
  • KS C 8526-2020 Measuring method of output power crystalline solar cell modules
  • KS C 8526-2005 Measuring method of output power crystalline solar cell modules
  • KS C 8529-1995(2020) Temperature coefficient measuring methods for crystalline solar cells and modules
  • KS C 8529-2020 Temperature coefficient measuring methods for crystalline solar cells and modules
  • KS C 8526-2005(2020) Measuring method of output power crystalline solar cell modules
  • KS C IEC 62060:2002 Secondary cells and batteries-Monitoring of lead-acid stationary batteries-User guide
  • KS C IEC TR 62060:2020 Secondary cells and batteries — Monitoring of lead-acid stationary batteries — User guide

Association Francaise de Normalisation

  • NF EN IEC 63202-1:2019 Photovoltaic cells - Part 1: measuring light-induced degradation of crystalline silicon photovoltaic cells
  • NF C57-331*NF EN IEC 63202-1:2019 Photovoltaic cells - Part 1 : measurement of light-induced degradation of crystalline silicon photovoltaic cells
  • NF EN 62132-2:2011 Integrated circuits - Measurement of electromagnetic immunity - Part 2: measurement of radiated immunity - TEM cell method and wideband TEM cell

European Committee for Electrotechnical Standardization(CENELEC)

  • EN IEC 63202-1:2019 Photovoltaic cells - Part 1: Measurement of light-induced degradation of crystalline silicon photovoltaic cells
  • EN 60904-1:2006 Photovoltaic devices Part 1: Measurement of photovoltaic current-voltage characteristics

Japanese Industrial Standards Committee (JISC)

  • JIS C 8920:2005 Measuring method of equivalent cell temperature for crystalline solar cells by the open-circuit voltage
  • JIS C 8947:2023 Spherical photovoltaic cell (SPVC) -- Measurement of photovoltaic current-voltage characteristics
  • JIS C 8971:1993 Measuring procedure of residual capacity for lead acid battery in photovoltaic system
  • JIS C 8913:1998 Measuring method of output power for crystalline solar cells
  • JIS C 8944:2009 Measuring methods of spectral response for multi-junction solar cells
  • JIS C 8825:2008 Testing and measurement techniques of small polymer electrolyte fuel cell power systems
  • JIS C 8943:2009 Indoor measuring method of output power for multi-junction solar cells and modules (Component reference cell method)
  • JIS C 8934:1995 Measuring method of output power for amorphous solar cells

ES-UNE

  • UNE-EN IEC 63202-1:2020 Photovoltaic cells - Part 1: Measurement of light-induced degradation of crystalline silicon photovoltaic cells

RO-ASRO

  • STAS 9131/5-1972 LEAD ALLOYS FOR STORAGE BATERIES Determination of arsenic content
  • STAS 9131/4-1972 LEAD ALLOYS FOR STORAGE BATERIES Determination of silver content.
  • STAS 9131/7-1972 LEAD ALLOYS FOR STORAGE BATERIES Determination of tin content
  • STAS 9131/8-1972 LEAD ALLOYS FOR STORAGE BATERIES Determination of bismuth content
  • STAS 9131/11-1972 LEAD ALLOYS FOR STORAGE BATTERIES Determination of sulphur content
  • STAS 9131/6-1972 LEAD ALLOYS FOR STORAGE BATTERIES Determination of iron content
  • STAS 9131/3-1972 LEAD ALLOYS FOR STORAGE BATTERIES Determination of copper content
  • STAS 9131/13-1972 LEAD ALLOYS FOR STORAGE BATTERIES Determination of sodium content
  • STAS 808/1-1985 PRIMARY BATTER1ES General technical requirements for quality
  • STAS 808/2-1978 PRIMARY BATTERIES Rules and methods for quality verification
  • STAS 808/2-1985 PRIMARY BATTERIES Rules and quality checking up methods

International Organization for Standardization (ISO)

  • ISO/CD TR 11954 Fuel cell road vehicles — Maximum speed measurement
  • ISO/TR 11954:2008 Fuel cell road vehicles - Maximum speed measurement
  • ISO 20087:2016 Photography — Digital still cameras — Battery life measurement
  • ISO/DTR 11954:2023 Fuel cell road vehicles — Maximum speed measurement
  • ISO 15387:2005 Space systems - Single-junction solar cells - Measurements and calibration procedures
  • ISO 23828:2008 Fuel cell road vehicles - Energy consumption measurement - Vehicles fuelled with compressed hydrogen
  • ISO 23828:2022 Fuel cell road vehicles — Energy consumption measurement — Vehicles fuelled with compressed hydrogen
  • ISO 23828:2013 Fuel cell road vehicles.Energy consumption measurement.Vehicles fuelled with compressed hydrogen

American National Standards Institute (ANSI)

  • ANSI/ASTM E1021:1995 Test Methods for Measuring the Spectral Response of Photovoltaic Cells
  • ANSI/SCTE 48-3-2011 Test Procedure for Measuring Shielding Effectiveness of Braided Coaxial Drop Cable Using the GTEM Cell

American Society for Testing and Materials (ASTM)

  • ASTM E1021-95 Standard Test Methods for Measuring Spectral Response of Photovoltaic Cells
  • ASTM E1021-95(2001) Standard Test Methods for Measuring Spectral Response of Photovoltaic Cells
  • ASTM E973-91e1 Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell

CENELEC - European Committee for Electrotechnical Standardization

  • EN 60904-1:1993 Photovoltaic Devices Part 1: Measurement of Photovoltaic Current-Voltage Characteristics

U.S. Military Regulations and Norms

(U.S.) Telecommunications Industries Association

  • TIA-5005-2014 Battery Life Measurement Methodology of cdma2000 1x and cdma2000 HRPD Mobile Stations

CZ-CSN

  • CSN 35 8531-1968 Electric power measurement. Electrical insulation measurement

HU-MSZT

BR-ABNT

  • ABNT TB-19 Pt.4-1979 Electronic and electrical measurements, electronic measurement methods using ionizing radiation

NEMA - National Electrical Manufacturers Association

  • NEMA IB 2-1974 DETERMINATION OF CAPACITY OF LEAD-ACID INDUSTRIAL STORAGE BATTERIES FOR MOTIVE POWER SERVICE
  • NEMA IB 2-1987 DETERMINATION OF CAPACITY OF LEAD-ACID INDUSTRIAL STORAGE BATTERIES FOR MOTIVE POWER SERVICE

KR-KS

  • KS C IEC TR 62060-2020 Secondary cells and batteries — Monitoring of lead-acid stationary batteries — User guide