XPS metallic state
XPS metallic state, Total:111 items.
The international standard classification for "XPS metallic state" includes: Other products of non-ferrous metals , Mechanical testing of metals , Environmental protection , Corrosion of metals .
The Chinese standard classification for "XPS metallic state" includes: Rare scattered metals and their alloys , Metal mechanical property test method , Vessel materials and their inspection methods , Natural resource and environment protection , Metal chemical property test method , Materials .
国家市场监督管理总局、中国国家标准化管理委员会
- GB/T 39859-2021 Gallium-based liquid metal
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
- GB/T 43933-2024 Technical specification for land reclamation and ecological restoration of metal mine
- GB/T 5482-1993 Metallic materials－Dynamic tear testing method
- GB/T 43611-2023 Gallium-based liquid metal thermal interface materials
- GB/T 5482-2007 Test method of metallic materials—Dynamic tear
- GB 5482-1993 Metallic materials－Dynamic tear testing method
- GB/T 5482-2023 Metallic materials―Dynamic tear test method
未注明发布机构
- DIN 17470:1963 Heating conductor alloys; technical delivery conditions for round and flat wire
Group Standards of the People's Republic of China
- T/BFTA 005-2023 Technical specification for Eco-products Certification- Metal Furniture
- T/ZMDS 60001-2022 Liquid metal lubricate used in high speed sliding bearings of CT tubes
- T/TMAC 064-2023 Technical specifications for ecological environmental protection and restoration of metal and non-metal mines
- T/ACEF 065-2023 Technical guidelines for ecological risk assessment of heavy metal contaminated soil
- T/ZSA 91-2021 General specifications for liquid metal desktop printing equipments
- T/CASME 679-2023 Technical requirements for edge welded dynamic metal bellows
- T/CNS 16-2020 Determination for corrosion reduction of metals and alloys in liquid lead alloys
- T/BFTA 005-2024 Technical specification for Eco-products Certification- Metal Furniture
Military Standard of the People's Republic of China-General Armament Department
- GJB 8375-2015 Test method for dynamic torsion of metallic materials
- GJB 8374-2015 Test method for dynamic tension of metallic materials
- GJB 8799-2015 Dynamic compression test method for metallic materials
Professional Standard - Railway
- TB/T 2985-2000 Test Method for Dynamic Tear Testing of Metallic Materials
Professional Standard - Electricity
- DL/T 1703-2017 Guide for condition evaluation of metal oxide arrester
- DL/T 1702-2017 Guide for condition based maintenance of metal oxide surge arresters
Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence
- GJB 5372-2005 Metal material dynamic impact test-instrumental method
Taiwan Provincial Standard of the People's Republic of China
- CNS 8556-1982 Plain Bearings the Tribological Behaviour of Metallic Antifriction Materials Siginificant Terms
Hubei Provincial Standard of the People's Republic of China
- DB4211/T 29-2023 Technical regulations for ecological restoration and management of open-pit non-metal mines
German Institute for Standardization
- DIN 1725-5:1986 Aluminium alloys, casting alloys; ingots (pigs), liquid metal; composition
- DIN EN 577:1995-09 Aluminium and aluminium alloys - Liquid metal - Specifications; German version EN 577:1995
- DIN 1725-5 Bb.1:1986 Aluminium alloys, casting alloys; ingots (pigs), liquid metal; composition; information on alloying processes
- DIN 17470:1984 Heating conductor alloys; technical delivery conditions for round and flat wire
- DIN EN 2032-2:1994-05 Aerospace series; metallic materials; part 2: coding of metallurgical condition in delivery condition; German version EN 2032-2:1994
- DIN EN 2032-2:1994 Aerospace series; metallic materials; part 2: coding of metallurgical condition in delivery condition; German version EN 2032-2:1994
- DIN EN 577:1995 Aluminium and aluminium alloys - Liquid metal - Specifications; German version EN 577:1995
- DIN 31665:1993 Plain bearings; testing of bearing metals; resistance to corrosion by lubricants and static conditions
Korean Agency for Technology and Standards (KATS)
- KS D 0068-2022 Glossary of terms used in amorphous metals
- KS D 0068-2002(2022) Glossary of terms used in amorphous metals
- KS D ISO 19819:2005 Metallic materials-Tensile testing in liquid helium
- KS D 0069-2002(2022) Method of determining the crystallization temperatures of amorphous metals
- KS D 0069-2022 Method of determining the crystallization temperatures of amorphous metals
- KS D 0069-2002(2017) Method of determining the crystallization temperatures of amorphous metals
PL-PKN
- PN H04310-1991 Static tensile testing of metals
- PN H04320-1957 Static compression testing of metals
- PN H04314-1991 Metals. Static tensile testing of tubes
- PN H04311-1967 S?a?ic ?ensile testing of me?als at Iow temperatures
- PN M69717-1958 Gas welding -- Statical tensile test of weld metal
SCC
- NS-EN 577:1995 Aluminium and aluminium alloys — Liquid metal — Specifications
- DANSK DS/EN 577:1995 Aluminium and aluminium alloys - Liquid metal - Specifications
- ANS 54.8-1988 Liquid Metal Fire Protection in LMR Plants
- VDI 3822 BLATT 1.6-2019 Damage analysis — liquid metal induced cracking
- DANSK DS/EN 2032-2:1994 Aerospace series - Metallic materials - Part 2: Coding of metallurgical condition in delivery condition
- NS-EN 2032-2:1994 Aerospace series — Metallic materials — Part 2: Coding of metallurgical condition in delivery condition
- VDI 3822 BLATT 1.6-2019 Damage analysis — liquid metal induced cracking
Association Francaise de Normalisation
- NF A57-110*NF EN 577:1995 Aluminium and aluminium alloys. Liquid metal. Specifications.
- NF EN 577:1995 Aluminium et alliages d'aluminium - Métal liquide - Spécifications.
- NF P24-351/A1:2003 Metal joinery - Windows, curtain walling, metal frame panels - Protection against corrosion and conservation of surface conditions
- NF P24-351:1997 Metal joinery. Windows, curtain walling, metal frame panels. Protection against corrosion and conservation of surface conditions.
- NF EN 2032-2:1994 Aerospace series - Metallic materials - Part 2: coding of metallurgical states in the delivery state
- NF L10-005-2*NF EN 2032-2:1994 Aerospace series. Metallic materials. Part 2 : coding of metallurgical condition in delivery condition.
- NF A95-171:1993 Metallic powders, excluding powders for hardmetals. Determination of dimensional changes associated with compacting and sintering.
Lithuanian Standards Office
- LST EN 577-2000 Aluminium and aluminium alloys - Liquid metal - Specifications
- LST EN 2032-2-2001 Aerospace series - Metallic materials - Part 2: Coding of metallurgical condition in delivery condition
Danish Standards Foundation
- DS/EN 577:1996 Aluminium and aluminium alloys - Liquid metal - Specifications
- DS 10601:1955 Heat treatment of metallic materials in solid state. Terminology and definitions
European Committee for Standardization (CEN)
- EN 577:1995 Aluminium and aluminium alloys - Liquid metal - Specifications
- EN 2032-2:1994 Aerospace Series Metallic Materials Part 2: Coding of Metallurgical Condition in Delivery Condition
AENOR
- UNE-EN 577:1996 Aluminium and aluminium alloys - Liquid metal - Specifications
- UNE-EN 2032-2:1996 AEROSPACE SERIES. METALLIC MATERIALS. PART 2: CODING OF METALLURGICAL CONDITION IN DELIVERY CONDITION.
British Standards Institution (BSI)
- BS EN 2032-2:1994(1999) Metallic materials — Part 2 : Coding ofmetallurgical condition in delivery condition
- BS EN 2032-2:1994 Metallic materials - Coding of metallurgical condition in delivery condition
- BS ISO 19819:2004 Metallic materials - Tensile testing in liquid helium
- BS 6729:1987 Method for determination of the dynamic fracture toughness of metallic materials
- BS EN 15664-1:2008 Influence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of metal release - Design and operation
- BS EN 15664-2:2010 Influence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of metal release - Test waters
TH-TISI
- TIS 1035-1991 Standard for metal polish, liquid
United States Navy
- NAVY MIL-H-22343 A-1968 HOSE ASSEMBLIES, METAL, LIQUID OXYGEN
- NAVY MIL-H-22343 A NOTICE 1-1997 HOSE ASSEMBLIES, METAL, LIQUID OXYGEN
- NAVY MIL-H-22343 A (2)-1981 HOSE ASSEMBLIES, METAL, LIQUID OXYGEN
HU-MSZT
- MNOSZ 2676-1956 The state of light metal casting
- MSZ 105/26-1982 Metal, alloy. Tensile strength test frozen state
RU-GOST R
- GOST 33810-2016 Metal barrels for food liquids. Specifications
- GOST 21132.0-1975 Aluminium alloys. Method for determination of hydrogen content in molten metal
- GOST 9.901.4-1989 Unified system of corrosion and ageing protection. Metals and alloys. Tests for corrosion cracking of specimens under uniaxial tension
SE-SIS
- SIS SS-ISO 8044:1989 Corrosion of metals and alloys — Terms and definitions
ANS - American Nuclear Society
- 54.8-1988 Liquid Metal Fire Protection in LMR Plants
American National Standards Institute （ANSI)
- ANSI/ASTM E604:1983 Test Method for Dynamic Tear Testing of Metallic Materials
RO-ASRO
- STAS 11576-1983 FLUXES FOR SOLDERING OF METALS Classification
- STAS 6833-1979 Testing of metals NOTCH IMPACT TEST AT LOW TEMPERATURES
CZ-CSN
- CSN 42 0480-1982 Aluminium and aluminium alloys. Determination of hydrogen content in liquid mettal
- CSN 42 0340-1982 Metal testing. Standard impact bending test method for large pieces
International Organization for Standardization (ISO)
- ISO 19819:2004 Metallic materials - Tensile testing in liquid helium
CN-QIYE
- Q/GDW 453-2010 Guidelines for Condition Maintenance of Metal Oxide Surge Arresters
Society of Automotive Engineers (SAE)
- SAE AMS4782E-1995 Nickel Alloy, Brazing Filler Metal 71Ni 10Si 19Cr, 1975 to 2075°F (1080 to 1135°C) Solidus-Liquidus Range (Reaffirmed: 01 Sept 2000)
- SAE AMS4779F-1995 Nickel Alloy, Brazing Filler Metal 94Ni 3.5Si 1.8B 1800 to 1950°F (982 to 1066°C) Solidus-Liquidus Range (Reaffirmed: 01 Sept 2000)
- SAE AMS4777F-1995 Nickel Alloy, Brazing Filler Metal 82Ni 4.5Si 7.0Cr 3.1B 3.0Fe, 1780 to 1830°F (971 to 999°C) Solidus-Liquidus Range (Reaffirmed: 01 Aug 2000)
- SAE AMS4775G-1995 Nickel Alloy, Brazing Filler Metal 73Ni 0.75C 4.5Si 14Cr 3.1B 4.5Fe, 1790 to 1970°F (977 to 1077°C) Solidus-Liquidus Range (Reaffirmed: 01 Aug 2000)
- SAE AMS4776F-1995 Nickel Alloy, Brazing Filler Metal 73Ni 4.5Si 14Cr 3.1B 4.5Fe (Low Carbon) 1790 to 1970°F (977 to 1077°C) Solidus-Liquidus Range (Reaffirmed: 01 Aug 2000)
- SAE AMS4994A-2006 Titanium Alloy Powdered Metal Products 6Al - 4V Hot Isostatically Pressed, Annealed UNS R56400
- SAE AMS4994-1992 Titanium Alloy, Powdered Metal Products 6Al 4V Hot Isostatically Pressed, Annealed
VDI - Verein Deutscher Ingenieure
- VDI 3822 BLATT 1.6-2017 Schadensanalyse - Fluessigmetallinduzierte Rissbildung
YU-JUS
- JUS M.K3.010-1989 Building hardvvare. Symbols for materials and states of the metal surface
American Society for Testing and Materials (ASTM)
- ASTM E604-83(2008) Standard Test Method for Dynamic Tear Testing of Metallic Materials
- ASTM E604-83(1994) Standard Test Method for Dynamic Tear Testing of Metallic Materials
- ASTM E604-18 Standard Test Method for Dynamic Tear Testing of Metallic Materials
- ASTM E604-83 Standard Test Method for Dynamic Tear Testing of Metallic Materials
- ASTM E604-83(2002) Standard Test Method for Dynamic Tear Testing of Metallic Materials
General Motors do Brasil
- GMSA EMS 9309663-2011 Metal - metal adhesive - medium resistance - high tixotropy - medium expansion Adesivo metal-metal - m閐ia resist阯cia - alta tixotropia - m閐ia expans鉶 Do Not use on New Programs; No Replacement
U.S. Military Regulations and Norms
- ARMY MIL-C-10578 D REINST NOTICE 2-1998 CORROSION REMOVING AND METAL CONDITIONING COMPOUND (PHOSPHORIC ACID BASE)
- ARMY MIL-C-10578 D-1982 CORROSION REMOVING AND METAL CONDITIONING COMPOUND (PHOSPHORIC ACID BASE)
- ARMY MIL-C-10578 D NOTICE 3-1998 CORROSION REMOVING AND METAL CONDITIONING COMPOUND (PHOSPHORIC ACID BASE)
- ARMY MIL-C-10578 D (3)-1988 CORROSION REMOVING AND METAL CONDITIONING COMPOUND (PHOSPHORIC ACID BASE)
BE-NBN
- NBN-EN 23134-2-1992 Light metals and their alloys. Terms and definitions. Part 2: Raw Form
Defense Logistics Agency
- DLA MIL-DTL-26499 E-2006 HOSE ASSEMBLY, METAL, FLEXIBLE, BREATHING OXYGEN
