Asymmetric Catalysis

Asymmetric Catalysis, Total:224 items.

The international standard classification for "Asymmetric Catalysis" includes: Components for aerospace construction , Laboratory medicine , Surface active agents , Lines, connections and circuits , Other products of the chemical industry , Milling tools .

The Chinese standard classification for "Asymmetric Catalysis" includes: Pipe fittings, clamps and seals , Medical laboratory equipment , Chemical additive , Telecommunication technical requirements and interface , Basic standards and general methods for catalyst , Catalyst , Cutting tools .

Professional Standard - Aviation

HB 6035-1986 Asymmetric tee pipe joint with sealing gasket through the partition
HB 5754-1983 Asymmetric screw-in tee fittings
HB 5745-1982 Asymmetric A-type tee fittings
HB 7530-1997 Asymmetrical Four-way Pipe Connector with Double Swivel Nuts
HB 6040-1986 Screw-in asymmetric tee fittings
HB 4-22-1976 Asymmetric B-type tee joint
HB 4-22-1983 Asymmetric B-type tee joint
HB 6041-2008 Tee, screwed-onto, asymmetry, flarsless tube, 21MPa
HB 6032-1986 Asymmetric tee pipe joint through the partition
HB 6040-2008 Tee, screwed-onto, asymmetry, flarsless tube, 21MPa
HB 7525-1997 Unsymmetrical Tee Pipe Joint with Swivel Nut
HB 6040-1996 Screw-in asymmetric tee fittings
HB 6034-1996 Asymmetric tee pipe joint with sealing gasket through the partition
HB 6031-1986 Asymmetric tee pipe joint through the partition
HB 6036-1986 Asymmetric tee pipe joint with sealing gasket through the partition
HB 6034～6036-1996 Asymmetric tee pipe joint with sealing gasket through the partition
HB 5753-1983 Asymmetric screw-in tee fittings
HB 5742-1983 Asymmetric B-type tee joint
HB 4-23-1976 Asymmetric A-type tee fittings
HB 8192-2002 Flared type asymmetric union tee with swivel nut (8192)
HB 6042-1996 Screw-in asymmetric tee fittings
HB 4-22-2002 Tee B type asymmetry flared tube
HB 7863-2008 Flaring-free cross clapboard unsymmetrical three-way pipe connector (28 MPa)
HB 4-23-2002 Tee A type asymmetry flared tube
HB 6036-1996 Asymmetric tee pipe joint with sealing gasket through the partition
HB 6041-1986 Screw-in asymmetric tee fittings
HB 5755-1983 Asymmetric screw-in tee fittings
HB 5746-1983 Asymmetric A-type tee fittings
HB 8152-2002 Tee reducer G type asymmetry titianium alloy flared tube
HB 6042-2008 Tee, screwed-onto, asymmetry, flarsless tube, 21MPa
HB 20022-2011 Tee, with swivel nut, asymmetry, flareless tube（1Cr11Ni2W2MoV）
HB 4-25-1976 Asymmetric screw-in tee fittings
HB 8154-2002 Tee reducer F type asymmetry titianium alloy flared tube
HB 6031-1996 Asymmetric tee pipe joint through the partition
HB 20028-2011 Cross with two swivel nut, asymmetry, flareless tube(1Cr11Ni2W2MoV)
HB 4-23-1983 Asymmetric A-type tee fittings
HB 5743-1983 Asymmetric B-type tee joint
HB 4-22-1999 Asymmetric type B tee pipe joint
HB 6033-2008 Tee, bulkhead, asymmetry, flarsless tube, 21MPa
HB 8189-2002 Flared type asymmetric union tee with swivel nut (8189)
HB 6035-1996 Asymmetric tee pipe joint with sealing gasket through the partition
HB 8191-2002 Flared type asymmetric union tee with swivel nut (8191)
HB 20021-2011 Tee, with swivel nut, asymmetry, flareless tube（0Cr18Ni9）
HB 5753-1982 Asymmetric screw-in tee fittings
HB 6033-1996 Asymmetric tee pipe joint through the partition
HB 20026-2011 Cross with two swivel nut, asymmetry, flareless tube(1Cr18Ni9Ti)
HB 5745-1983 Asymmetric A-type tee fittings
HB 6032-1996 Asymmetric tee pipe joint through the partition
HB 6031-2008 Tee, bulkhead, asymmetry, flarsless tube, 21MPa
HB 6040～6042-1996 Screw-in asymmetric tee fittings
HB 4-25-1983 Asymmetric screw-in tee fittings
HB 7866-2008 Flaring-free unsymmetrical screw-in three way pipe connector (28 MPa)
HB 5756-1983 Asymmetric screw-in tee fittings
HB 20027-2011 Cross with two swivel nut, asymmetry, flareless tube(0Cr18Ni9)
HB 4-23-1999 Asymmetric Type A Tee Fittings
HB 730-1979 Asymmetric double angle milling cutter D=40~100mm
HB 6033-1986 Asymmetric tee pipe joint through the partition
HB 6034-1986 Asymmetric tee pipe joint with sealing gasket through the partition
HB 5744-1983 Asymmetric B-type tee joint
HB 6032-2008 Tee, bulkhead, asymmetry, flarsless tube, 21MPa
HB 20020-2011 Tee, with swivel nut, asymmetry, flareless tube(1Cr18Ni9Ti)
HB 6041-1996 Screw-in asymmetric tee fittings
HB 6031～6033-1996 Asymmetric tee pipe joint through the partition
HB 5748-1983 Asymmetric A-type tee fittings
HB 5741-1983 Asymmetric B-type tee joint
HB 4-25-2002 Tee screwed-onto asymmetry flared tube
HB 7527-1997 Unsymmetrical Tee Pipe Joint with Double Swivel Nuts
HB 8158-2002 Tee B type asymmetry titianium alloy flared tube
HB 6042-1986 Screw-in asymmetric tee fittings
HB 5747-1983 Asymmetric A-type tee fittings
HB 8190-2002 Flared type asymmetric union tee with swivel nut (8190)
HB 4-25-1999 Asymmetric screw-in tee fittings
HB 5741-1982 Asymmetric B-type tee joint

Military Standard of the People's Republic of China-General Armament Department

GJB 859.24-1990 Asymmetrical tee pipe joint with sealing gasket through partition
GJB 1960-1994 Catalyst-814 and Catalyst-816 Specifications
GJB 859.26-1990 Screw-in asymmetric tee fitting
GJB 1960A-2019 Catalyst-814 and Catalyst-816 Specifications
GJB 859.23-1990 Asymmetric tee pipe joint through partition

工业和信息化部

HG/T 5314-2018 Rare earth containing catalytic cracking additive for heavy oil with high distillate yields
HG/T 5765-2020 Determination method of metallic elements in catalytic cracking catalysts
HG/T 5579-2019 Test method for catalytic activity of terephthalic acid hydrofining catalyst
HG/T 5315-2018 Alkylation catalyst used for purification process
HG/T 5584-2019 Terephthalic acid hydrotreating catalysts
HG/T 5405-2018 Test method of catalytic performance for ethylene polymerization catalyst

Professional Standard - Medicine

YY/T 1455-2016 Guidelines for values assignment of catalytic activity concentrations of enzymes using reference measurement procedures and evaluation of uncertainty

Taiwan Provincial Standard of the People's Republic of China

CNS 8099-1981 Self - Aligning Thrust Roller Bearings Single - Thrust with Asymmetric Rollers

Group Standards of the People's Republic of China

T/GDBX 059-2022 Palladium-carbon catalyst
T/CRRA 0709-2023 Collection, packaging and sampling of catalytic combustion spent catalysts
T/CSTM 00525-2022 Selective hydrodesulfurization catalyst for fluid catalytic cracking gasoline
T/SACE 017-2020 Zinc Oxide from Spent Catalyst
T/CNIA 0054-2020 Rhodium Carbon Catalyst
T/CSTM 01240-2024 Prehydrogenation catalyst for catalytic cracking gasoline
T/CNIA 0052-2020 Ruthenium zinc catalyst
T/CSTM 01264-2024 The determination method for acid accessibility index of catalytic cracking catalyst
T/CSTM 00526-2022 Hydroisomerization and hydrodesulfurization catalyst for fluid catalytic cracking gasoline
T/CSTM 00065-2019 Catalyst for oxidation of acrolein to acrylic acid
T/CIEP 0012-2024 Determination of carbon content of catalysts in catalytic cracking and catalytic reforming units - Elemental analyzer method

Professional Standard - Chemical Industry

HG/T 6282-2024 Determination of Carbon Monoxide Index of Catalytic Cracking Catalyst
HG/T 5579～5583-2019 Test methods for activity of terephthalic acid hydrotreating catalysts, chemical composition analysis methods and activity test methods for polyethylene oxide catalysts, test methods for activity test methods for n-olefin to isobutylene catalysts in lique
HG/T 5313～5314-2018 Special Catalyst for Catalytic Cracking to Increase Production of Isoparaffins and Propylene Production and Rare Earth Containing High Liquid Yield Heavy Oil Catalytic Cracking Cocatalyst (2018)
HG/T 2509-2012 Methanation Catalysts
HG/T 5584～5587-2019 Terephthalic acid hydrorefining catalyst, activity test method of ruthenium-based ammonia synthesis catalyst, chemical composition analysis method of supported ammonia synthesis catalyst, and chemical composition analysis method of catalyst for hydrogenat
HG/T 5764～5767-2020 Determination of pore structure of petroleum refining catalysts, determination of metal elements in catalytic cracking catalysts, test methods for catalyst activity of supported rosin disproportionation and catalysts for cobalt and molybdenum sulfide (202
HG 2509-1993 methanation catalyst
HG/T 6283-2024 Catalytic cracking of light olefins promoter
HG/T 4858-2015 Analytical method of chemical composition in palladium-carbon catalyst for purified terephthalic acid
HG/T 3550-2004 Ammonia synthesis catalyst
HG/T 2509-2004 Methanation catalyst
HG/T 4617-2014 Ester resin catalyst

Professional Standard - Military and Civilian Products

WJ 1036-1994 Asymmetric elastic goggles for optical instrument parts

国家能源局

SH/T 0964-2017 Determination of catalytic cracking catalyst wear index straight tube method
SH/T 0960-2017 Sampling method for catalytic cracking catalysts, auxiliaries and adsorbents
SH/T 0953-2017 Determination of loss on ignition of catalytic cracking catalyst
SH/T 0961-2017 Determination of alumina content in catalytic cracking catalyst EDTA volumetric method
SH/T 0952-2017 Determination method of microreactivity index of catalytic cracking catalyst
SH/T 0951-2017 Determination of particle size distribution of catalytic cracking catalysts by laser scattering method
SH/T 0955-2017 Water droplet method for determination of pore volume of catalytic cracking catalysts
SH/T 0954-2017 Determination of apparent bulk density of catalytic cracking catalysts
SH/T 0962-2017 Determination of sodium oxide content in catalytic cracking catalysts by flame photometry

Hebei Provincial Standard of the People's Republic of China

DB13/T 5528-2022 Technical specification for catalytic coal gasification without recovery catalyst
DB13/T 5511-2022 Coal Catalytic Gasification Catalyst Recovery Process Technical Regulations

Professional Standard - Post and Telecommunication

YD/T 1323-2004 Technical requirements for access network Asymmetric Digital Subscriber Line (ADSL)
YD/T 1055-2005 Test method for access network equipment - asymmetric ditigal subscriber line(ADSL)

Jilin Provincial Standard of the People's Republic of China

DB22/T 2660-2017 Test of Catalytic Activity of PDS Desulfurization Catalyst

Professional Standard - Energy

NB/SH/T 6075-2023 Dynamic Image Method for Determination of Catalyst Morphology in Catalytic Cracking

国家铁路局

TB/T 3553-2019 The track circuit system-Asymmetric high voltage impulse track circuit

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 38602-2020 Test method of catalytic activity for catalytic wet oxidation of organic wastewater
GB/T 37352-2019 Marine selective catalytic reduction(SCR)cellular-type denitrification catalysts

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 6128.1-2007 Angle milling cutter -Part1: The single and double unequal-angle cutters

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34700-2017 Rare earth type selective catalytic reduction (SCR) denitration catalysts

未注明发布机构

DIN 19279 E:2016-11 Photocatalytic activity of surfaces - Determination of the photocatalytic deposition velocity of nitrogen monoxide at photocatalytically active surfaces

IN-BIS

IS 4387-1967 Asymmetric reinforcement specifications

American Society for Testing and Materials (ASTM)

ASTM UOP815-87 Acid Insolubles in Catalysts
ASTM D3766-86(2007) Standard Terminology Relating to Catalysts and Catalysis
ASTM D3766-86(2002) Standard Terminology Relating to Catalysts and Catalysis
ASTM D3766-08 Standard Terminology Relating to Catalysts and Catalysis
ASTM D3766-24a Standard Terminology Relating to Catalysts and Catalysis
ASTM D3766-86(1997) Standard Terminology Relating to Catalysts and Catalysis
ASTM D3766-08(2013) Standard Terminology Relating to Catalysts and Catalysis
ASTM D7206/D7206M-19 Standard Guide for Cyclic Deactivation of Fluid Catalytic Cracking (FCC) Catalysts with Metals
ASTM D3766-08(2018) Standard Terminology Relating to Catalysts and Catalysis

Korean Agency for Technology and Standards (KATS)

KS D 8540-2013(2018) Autocatalytic nickel-boron coatings on metals
KS P ISO 5836-2010(2016) Implants for surgery－Metal bone plates－Holes corresponding to screws with asymmetrical thread and spherical under-surface

AGMA - American Gear Manufacturers Association

08FTM06-2008 Tooth Fillet Profile Optimization for Gears with Symmetric and Asymmetric Teeth

National Association of Pipe Fabricators (NAPF)

PFI ES-35-1998 Nonsymmetrical Bevels and Joint Configurations for Butt Welds

GM Europe

GME8282-2002 Absolutbeurteilung der Haftfestigkeit von Katalysatorbeschichtungen Catalytic Converter - Washcoat Loss Evaluation English/German; Includes Appendix A-C
GME4667-2004 脺berpr眉fung der Haftf盲higkeit von Beschichtungen im Katalysator Test of Coating Adherence in Catalytic Converters English/German; Includes Appendix A

Association Francaise de Normalisation

NF R16-208:1955 Tuyaux flexibles à embouts dissymétriques
NF E29-572:2020 Demi-raccords symétriques (système Guillemin) sans verrou mobile
NF B44-212-1*NF EN 16980-1:2021 Photocatalysis - Continuous flow test methods - Part 1 : determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials
NF EN 13411-6/IN1:2008 Terminaisons pour câbles en acier - Sécurité - Partie 6 : boîte à coin asymétrique

HU-MSZT

MSZ 3864-1981 MSZ 3864-81 double-sided asymmetric angle milling cutter
MSZ 3652-1979 catalyst

API - American Petroleum Institute

API 4218-1973 Oxygenates in Automotive Exhausts Effect of an Oxidation Catalyst

British Standards Institution (BSI)

BS EN 13411-6:2004 Terminations for steel wire ropes - Safety - Asymmetric wedge socket
BS EN 13411-6:2004+A1:2008 Terminations for steel wire ropes - Safety - Asymmetric wedge socket
BS ISO 20814:2019 Nanotechnologies. Testing the photocatalytic activity of nanoparticles for NADH oxidation
BS ISO/IEC 18033-2:2006 Information technology - Security techniques - Encryption algorithms - Asymmetric ciphers
BS ISO/IEC 11770-3:2021 Information security. Key management. Mechanisms using asymmetric techniques
BS ISO/IEC 13888-3:2020 Information security. Non-repudiation - Mechanisms using asymmetric techniques

CZ-CSN

CSN ON 16 6361-1966 Hinges for furniture. Lift-off butt hinges unequal.
CSN 04 2131-1962 Core chaplet blocks with asymmetrical plates — heavy design
CSN 04 2134-1962 Double-post core chaplet blocks with asymmetrical rectangular plates
CSN 04 2130-1962 Core chaplet blocks with asymmetrical plates — light design

RU-GOST R

GOST 21937-1976 Hot-rolled steel unsymmetrical bulb section for chipbuilding. Dimensions
GOST 21342.11-1976 Varistors. Method of measuring current asymmetry and voltage asymmetry

GSO

NB/SH/T 0954-2017 Determination of apparent bulk density of catalytic cracking catalyst
NB/SH/T 0955-2017 Determination of pore volume of catalytic cracking catalysts - Water drop method
NB/SH/T 0953-2017 Determination of ignition loss of catalytic cracking catalyst
NB/SH/T 0952-2017 Determination of the micro-reaction index of catalytic cracking catalyst
NB/SH/T 0960-2017 Sampling method for catalytic cracking catalysts, promoters and adsorbents
NB/SH/T 0961-2017 Determination of alumina content in catalytic cracking catalysts - EDTA volumetric method
NB/SH/T 0964-2017 Determination of the attrition index of catalytic cracking catalysts - Straight tube method
NB/SH/T 0962-2017 Determination of sodium oxide content in catalytic cracking catalysts - Flame photometry
OS GSO EN 13411-6:2011 Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket
NB/SH/T 0951-2017 Determination of particle size distribution of catalytic cracking catalysts - Laser scattering method

SCC

DANSK DS/EN 16980-1:2021 Photocatalysis – Continuous flow test methods – Part 1: Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials
NS-EN 16980-1:2021 Photocatalysis – Continuous flow test methods – Part 1: Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials
VDI 3476 BLATT 3-2012 Exhaust gas purification — Catalytic exhaust gas purification process — Selective catalytic reduction
DANSK DS/ISO 20814:2019 Nanotechnologies – Testing the photocatalytic activity of nanoparticles for NADH oxidation
VDI 3476 BLATT 3-2012 Exhaust gas purification — Catalytic exhaust gas purification process — Selective catalytic reduction
AENOR UNE-EN 13411-6+A1:2008 Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket
DIN 19279:2018 Photocatalytic activity of surfaces - Determination of the photocatalytic deposition velocity of nitrogen monoxide at photocatalytically active surfaces
UNE 88111:2005 Corrugated and asymetrical fibrecement sheets. Guidelines for the use on roofing.
NS-EN 13411-6:2004 Terminations for steel wire ropes — Safety — Part 6: Asymmetric wedge socket
UNE-EN 13411-6:2005 Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket
DIN 19279 E:2016 Draft Document - Photocatalytic activity of surfaces - Determination of the photocatalytic deposition velocity of nitrogen monoxide at photocatalytically active surfaces

European Committee for Standardization (CEN)

PD CEN/TS 16980-1:2016 Photocatalysis - Continuous flow test methods - Part 1: Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials
CEN EN 13411-6-2004 Terminations for steel wire ropes Safety Part 6: Asymmetric wedge socket

German Institute for Standardization

DIN 728:1991-02 Single direction self-aligning thrust bearings with asymmetric rollers
DIN EN 16980-1:2020 Photocatalysis - Continuous flow test methods - Part 1: Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials; German and English version prEN 16980-1:2020
DIN EN 13411-6:2009-04 Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket; German version EN 13411-6:2004+A1:2008 / Note: DIN EN 13411-6 (2004-09) remains valid alongside this standard until 2009-12-28.
DIN 19279:2018-01 Photocatalytic activity of surfaces - Determination of the photocatalytic deposition velocity of nitrogen monoxide at photocatalytically active surfaces

American Gear Manufacturers Association

AGMA 08FTM06-2008 Tooth Fillet Profile Optimization for Gears with Symmetric and Asymmetric Teeth

PL-PKN

PN C83030-1971 Accelerators for vulcanization Accelerator D

International Telecommunication Union (ITU)

ITU-T G.992.3 AMD 5-2008 Asymmetric digital subscriber line transceivers 2 (ADSL2) Amendment 5 Study Group 15
ITU-T G.992.3-2005 Asymmetric digital subscriber line transceivers 2 (ADSL2)
ITU-T G.992.1 ANNEX H-2000 Asymmetric Digital Subscriber Line (ADSL) Tranceivers Annex H: Specific Requirements for a Sychronized Symmetrical DSL (SSDSL) System Operating in the Same Cable Binder as ISDN as Defined in ITU-T G.961 Appendix III Series G: Transmission Systems and Med
ITU-T G.992.3 AMD 2-2006 Asymmetric digital subscriber line (ADSL) transceivers ?2 (ADSL2) Amendment 2 Study Group 15
ITU-T G.992.1 CORR 2-2002 Asymmetric Digital Subscriber Line (ADSL) Transceivers Series G: Transmission Systems and Media Digital Systems and Networks Digital Sections and Digital Line System - Access Networks Corrigendum 2
ITU-T G.992.1 CORR 1-2001 Asymmetric Digital Subscriber Line (ADSL) Transceivers Series G: Transmission Systems and Media Digital Systems and Networks Digital Sections and Digital Line System - Access Networks
ITU-T G.992.3 AMD 1-2005 Asymmetric digital subscriber line transceivers 2 (ADSL2) Study Group 15
ITU-T G.992.1-1999 Asymmetric Digital Subscriber Line (ADSL) Transceivers - Series G: Transmission Systems and Media Digital Systems and Networks - Digital Transmission Systems - Digital Sections and Digital Line System - Access Networks
ITU-T G.992.3 NOTE-2007 Asymmetric digital subscriber line transceivers 2 (ADSL2)
ITU-T G.992.5-2005 Asymmetric Digital Subscriber Line (ADSL) transceivers ?Extended bandwidth ADSL2 (ADSL2+) Study Group 15

RO-ASRO

STAS 7651-1986 SKLF-ALIGNING TIIRUST ROLLER BEARINGS WITII ASIMETRIC ROLLER Dimensions

GM North America

GM 9986017-1993 Bismuth Catalyst
GM 9986018-1993 Tertiary Amine Catalyst

KR-KS

KS C ISO 20814-2023 Nanotechnologies — Testing the photocatalytic activity of nanoparticles for NADH oxidation

VDI - Verein Deutscher Ingenieure

VDI 3476 Blatt 3-2009 Abgasreinigung - Katalytische Verfahren der Abgasreinigung - Selektive katalytische Reduktion

ESDU - Engineering Sciences Data Unit

ESDU 88006 A-1989 Estimation of drag arising from asymmetry in thrust or airframe configuration.

AENOR

UNE 83321:2017 EX Concrete with photocatalytic activity. Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials. Continuous flow test method

US-FCR

FCR UFGS-44 13 52-2011 THERMAL (CATALYTIC) OXIDATION SYSTEMS
FCR COE CEGS 11378-1999 THERMAL (CATALYTIC) OXIDATION SYSTEMS

North Atlantic Treaty Organization Standards Agency

STANAG 1468-2008 ALLIED MARITIME FORCE PROTECTION AGAINST ASYMMETRIC THEATS IN HARBOUR AND ANCHORAGE - ATP-74

General Motors Corporation (GM)

GM 9982231-1996 Adhesive, Promoter
GM 9982249-2002 Adhesive Promoter

American Welding Society (AWS)

WRC 090:1963 Part 1: A Critical Study Of The Solutions Of The Asymmetric Bending Of Spherical Shells

Institute of Electrical and Electronics Engineers (IEEE)

The IEEE Global Initiative on Ethics of Extended Reality (XR) Report--Extended Reality (XR) Ethics i The IEEE Global Initiative on Ethics of Extended Reality (XR) Report--Extended Reality (XR) Ethics in Education

National Aeronautics and Space Administration (NASA)

NASA NACA-RM-A53C19-1953 Experimental investigation of the effects of plan-form taper on the aerodynamic characteristics of symmetrical unswept wings of varying aspect ratio

American National Standards Institute （ANSI)

ANSI T1.423-2001 Telecommunications - Asymmetric Digital Subscriber Line (ADSL) Transceivers

U.S. Military Regulations and Norms

ARMY UFGS-44 13 52-2011 THERMAL (CATALYTIC) OXIDATION SYSTEMS

BE-NBN

NBN 391-1956 Rubber catalytic belt

Danish Standards Foundation

DS/EN 13411-6+A1:2009 Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket