DR6000 measures water hardness

DR6000 measures water hardness, Total:452 items.

The international standard classification for "DR6000 measures water hardness" includes: Fruits and derived products , Chemical analysis , Cereals, pulses and derived products , Plastics , Rubber , Water quality , Rubber and plastics products , Rubber and plastics products in general .

The Chinese standard classification for "DR6000 measures water hardness" includes: Chemical reagent in general , Basic standards and general methods for water treatment agent , Cereal crop and forage crop in general , Basic standards and general methods for synthetic resin and plastic , Rubber products in general , Other rubber products .

Professional Standard - Agriculture

NY/T 2009-2011 Determination of fruit firmness

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 39693.4-2025 Rubber, vulcanized or thermoplastic—Determination of hardness—Part 4: Indentation hardness by durometer method (Shore hardness)
GB/T 39693.7-2022 Rubber,vulcanized or thermoplastic—Determination of hardness—Part 7:Apparent hardness of rubber-covered rollers by Shore-type durometer method
GB/T 6909-2018 Analysis of water used in boiler and cooling system—Determination of hardness
GB/T 6909-2008 Analysis of water used in boiler and cooling system - Determination of hardness
GB/T 6909.2-1986 Methods for analysis of water for boiler and for cooling; The determination of hardness; Low hardness
GB/T 21304-2007 Determination of wheat hardness—Hardness index method
GB/T 2411-2008 Plastics and ebonite - Determination of indentation hardness by means of a duronmeter(shore hardness)
GB/T 6909.1-1986 Methods for analysis of water for boiler and for cooling--The determination of hardness--High hardness
GB/T 1698-2003 Ebonite--Determination of hardness by means of a durometer
GB/T 3398.2-2008 Plastics - Determination of hardness - Part 2: Rockwell hardness

Professional Standard - Coal

MT/T 206-1995 Determination method of hardness of coal-mine water
MT/T 206-2011 Determination of Hardness of Coal Mine Water

Taiwan Provincial Standard of the People's Republic of China

CNS 1011-1983 Method of Test for Tensile Strength of Hydraulic Cement Mortar
CNS 11272-1985 Method of Test for Density of Hydraulic Cement
CNS 3590-1988 Normal consistency test method for hydraulic cement

Professional Standard - Chemical Industry

HG/T 2450-1993 Determination of apparent hardness of rubber rollers International rubber durometer method
HG/T 2413.2-1992 Rubber-covered Rollers - Determination of Apparent Hardness: Shore Hardness Tester Method
HG/T 2450-1999 Rubber -- Covered rollers -- Determination of apparent hardness : IRHD method
HG/T 2413.1-1992 Rubber-covered Rollers - Determination of Apparent Hardness: Jones (P.J) Hardness Tester Method
HG/T 3846-2008 Ebonite-Determination of hardness by means of a durometer

National Metrological Technical Specifications of the People's Republic of China

JJF 1949-2021 Calibration Specification for Water Hardness Meters

Group Standards of the People's Republic of China

T/SZS 4018-2020 Hardness test method of precious metal jewelry Vickers hardness test method
T/NAIA 0250-2023 Determination of total water hardness by fully automatic potentiometric titration method
T/BHES 1-2022 Determination of total water hardness and calcium and magnesium automatic potentiometric titration

Hebei Provincial Standard of the People's Republic of China

DB13/T 5591-2022 Rockwell hardness test method for forged (rolled) steel ball hardness

Professional Standard - Commodity Inspection

SN/T 4779.3-2017 Determination of total hardness in bottled water for export—Method by spectrophotometry coupled with flow injection analysis(FIA)

Cuban Institute of Standards and Metrology

NC 84-19-1986 Mineral Waters. Determination of Total Hardness
NC 05-02-1968 Hardenability test of steel

National Standardisation Body (ASRO)

STAS 3026-1976 DRINKING WATER Determination of hardness
STAS 7156/1-1971 FIBRE BUILDING BOARDS MEDIUM-HARD, HARD AND EXTRA-HARD BOARDS. Determination of water absorption and swelling in thickness after total immersion in water.
STAS 8509-1986 ORGANIC DYES Sennitiveness determination to hard waler
STAS SR ISO 868:1995 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
STAS 7313-1982 WATER AND STEAM FROM BOILER PLANTS Determination of hardness, alkalinity and acidity
STAS 7855/2-1978 CHIPBOARDS Determination of Brinell hardness
STAS 11333-1979 THERMOSETTING PLASTICS Hardness determination by Barcol durometer
STAS 8643-1970 PLASTICS Determination of identation hardness by means of a dnrometer Shore
STAS 10703-1986 Testing of metals ROCKWELL HARDNESS TESTING (B, F, G SCALES)
STAS SR EN 23369-1995 Impermeable sintered metal materials and hardmetals. Determination of density
STAS 9472/8-1975 Sintered hard alloys VICKERS HARDNESS TESTING

Spanish Association for Standardization (UNE)

UNE 77040:2002 Water quality. Determination of the water hardness. Complexometric method with EDTA.
AENOR UNE-EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
UNE-EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
UNE 53549:1991 RUBBER. DETERMINATION OF HARDNESS IN (IRHD) INTERNATIONAL RUBBER HARDNESS DEGREES
AENOR UNE 67101:1985 Ceramic tiles. Determination of surface scratch hardness according to Mohs.
UNE 67101:1985 CERAMIC TILES. DETERMINATION OF SCRATCH HARDNESS OF SURFACE ACCORDING TO MOHS
UNE-EN 13286-41:2003 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
UNE-EN 59:2016 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
AENOR UNE-EN ISO 2039-2:2000 PLASTICS - DETERMINATION OF HARDNESS - PART 2: ROCKWELL HARDNESS (ISO 2039-2:1987)
UNE-EN ISO 4545-4:2018 Metallic materials - Knoop hardness test - Part 4: Table of hardness values (ISO 4545-4:2017)
UNE-EN ISO 6507-4:2018 Metallic materials - Vickers hardness test - Part 4: Tables of hardness values (ISO 6507-4:2018)
UNE-EN 23878:2001 HARDMETALS. VICKERS HARDNESS TEST. (ISO 3878:1983).
UNE-EN 12390-8:2009 Testing hardened concrete - Part 8: Depth of penetration of water under pressure

Gosstandart of Russia

GOST 31954-2012 Drinking water. Methods of hardness determination
GOST R 52407-2005 Drinking water. Methods of hardness determination
GOST R 52029-2003 Water. Unit of hardness
GOST 6055-1986 Water. Unit of hardness
GOST 4151-1972 Drinking water. Method for determination of total hardness
GOST 31865-2012 Water. Unit of hardness
GOST 24622-1991 Plastics. Determination of hardness. Rockwell hardness
GOST 24621-2015 Plastics and ebonite. Determination of indentation hardness by means of a durometer (Shore hardness)
GOST 24672-1981 Gauges for taper thread. Specifications
GOST 24621-1991 Plastics and ebonite. Determination of indentation hardness by means of a durometer (Shore hardness)
GOST 12577-1967 Refined sugar. Methods for determination of lump sugar solidity and dissolution rate in water
GOST ISO 12900-2022 Coal. Determination of abrasiveness
GOST R ISO 7619-1-2009 Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Part 1. Durometer method of measurement (Shore hardness)
GOST R 52166-2003 Paints and varnishes. Determination of hardness by pendulum damping test
GOST 20017-1974 Sintered hard metals. Determination of Rockwell hardness
GOST 25172-1982 Sintered hardmetals. Method of determination of Vickers hardness

American Society for Testing and Materials (ASTM)

ASTM RR-D19-1125 1986 D1126- Test Method for Hardness in Water
ASTM C204-24 Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
ASTM D1126-17(2025) Standard Test Method for Hardness in Water
ASTM F1957-99 Standard Test Method for Composite Foam Hardness-Durometer Hardness
ASTM F1957-99(2017) Standard Test Method for Composite Foam Hardness-Durometer Hardness
ASTM C204-11e1 Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
ASTM D1126-96 Standard Test Method for Hardness in Water
ASTM C204-25 Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
ASTM C204-18 Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
ASTM RR-E28-1043 2010 E0110-Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers
ASTM E140-97e2 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
ASTM E140-12B(2019)e1 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
ASTM RR-C09-1028 2004 C1064/C1064M-Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete
ASTM C204-18e1 Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
ASTM C204-17 Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
ASTM D1126-02 Standard Test Method for Hardness in Water
ASTM C204-07 Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
ASTM D1126-02(2007)e1 Standard Test Method for Hardness in Water
ASTM D1126-12 Standard Test Method for Hardness in Water
ASTM C188-95(2003) Standard Test Method for Density of Hydraulic Cement
ASTM C188-95 Standard Test Method for Density of Hydraulic Cement
ASTM C204-23 Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
ASTM RR-E28-1044 2012 E0140-Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
ASTM B294-92(2001) Standard Test Method for Hardness Testing of Cemented Carbides
ASTM RR-E28-1005 1985 E0140-Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
ASTM C188-17(2023) Standard Test Method for Density of Hydraulic Cement
ASTM C430-25 Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve
ASTM C188-09 Standard Test Method for Density of Hydraulic Cement
ASTM E140-12be1 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
ASTM RR-E28-1003 1984 E0140-Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
ASTM E140-12b Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
ASTM C430-24 Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve
ASTM RR-E28-1001 1982 E0140-Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
ASTM B294-92(2006)e1 Standard Test Method for Hardness Testing of Cemented Carbides
ASTM B294-92(1997) Standard Test Method for Hardness Testing of Cemented Carbides
ASTM F113-82(1991) Hardness test method
ASTM B294-92(2006) Standard Test Method for Hardness Testing of Cemented Carbides
ASTM E140-97e3 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
ASTM E140-02e1 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
ASTM C204-16 Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
ASTM RR-D11-1091 2000 D2240- Standard Test Method for Rubber Property—Durometer Hardness
ASTM D1126-17 Standard Test Method for Hardness in Water
ASTM C187-10 Standard Test Method for Normal Consistency of Hydraulic Cement
ASTM C157/C157M-08(2014)e1 Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete
ASTM C430-08(2015) Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve
ASTM E140-05e1 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
ASTM E140-05 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
ASTM E140-02 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
ASTM C430-96 Standard Test Method for Fineness of Hydraulic Cement by the 45-181m (No. 325) Sieve
ASTM C187-11 Standard Test Method for Normal Consistency of Hydraulic Cement
ASTM C1090/C1090M-23 Standard Test Method for Measuring Changes in Height of Cylindrical Specimens of Hydraulic-Cement Grout
ASTM C157/C157M-24 Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete
ASTM C430-96(2003) Standard Test Method for Fineness of Hydraulic Cement by the 45-956;m (No. 325) Sieve
ASTM D2240-05(2010) Standard Test Method for Rubber Property8212;Durometer Hardness
ASTM C430-17 Standard Test Method for Fineness of Hydraulic Cement by the 45-&x3bcm (No. 325) Sieve
ASTM E140-07 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
ASTM C188-14 Standard Test Method for Density of Hydraulic Cement
ASTM C430-08 Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve
ASTM RR-C24-1012 1982 C0661-Test for Indentation on Hardness of Elastomeric Type Sealants by Means of a Durometer
ASTM C1245-93 Standard Test Method for Determining Bond Strength Between Hardened Roller Compacted Concrete and Other Hardened Cementitious Mixtures Point Load Test
ASTM D2134-19 Standard Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker

Polski Komitet Normalizacyjny (PKN)

PN C04551-01-1991 Water and waste water Tests for calcium ; Determination of calcium (calcium hardess) by EDTA method
PN C04554 ArkusZ03-1972 Water and wastewater Hardness tests Determination of total hardness in the range of 0.357 mval/dm3 and below by the edetate method
PN C04554 ArkusZ01-1971 Water and wastewater hardness tests General provisions and scope of the standard

American Association of State Highway and Transportation Officials

AASHTO T 133-2019 Standard Method of Test for Density of Hydraulic Cement
AASHTO T 153-2020 Standard Method of Test for Fineness of Hydraulic Cement by Air Permeability Apparatus
AASHTO T 192-2023 Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve
T 309M/T 309-2006 Standard Method of Test for Temperature of Freshly Mixed Hydraulic- Cement Concrete
AASHTO T 192-1999 Standard Method of Test for Fineness of Hydraulic Cement by the 45-muem (No. 325) Sieve
AASHTO T 129-2014(R2018) Standard Method of Test for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste
AASHTO TP 136-2020 Standard Method of Test for Determining the Degree of Saturation of Hydraulic-Cement Concrete
AASHTO T 153-2009 Standard Method of Test for Fineness of Hydraulic Cement by Air Permeability Apparatus (ASTM Designation: C204-07)
AASHTO T 153-2013(2017) Standard Method of Test for Fineness of Hydraulic Cement by Air Permeability Apparatus (ASTM Designation: C204-11ε1)
AASHTO T 133-1998(2002) Standard Method of Test for Density of Hydraulic Cement (ASTM Designation: C188-95e)
AASHTO T 133-1998 Standard Method of Test for Density of Hydraulic Cement
AASHTO TP 136-2022 Standard Method of Test for Determining the Degree of Saturation of Hydraulic-Cement Concrete
AASHTO T 160-2009(2014) Standard Method of Test for Length Change of Hardened Hydraulic Cement Mortar and Concrete (ASTM Designation: C157/C157M-06)
AASHTO T 160-2017(2021) Standard Method of Test for Length Change of Hardened Hydraulic Cement Mortar and Concrete (ASTM Designation: C157/C157M-14)
AASHTO T 129-2006 Standard Method of Test for Normal Consistency of Hydraulic Cement (ASTM Designation: C187-04)
AASHTO T 192-2019 Standard Method of Test for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve
AASHTO T 192-1999(2003) Standard Method of Test for Fineness of Hydraulic Cement by the 45-micro m (No. 325) Sieve
T160-1997 Standard Method of Test for Length Change of Hardened Hydraulic Cement Mortar and Concrete (Twentieth Edition; ASTM C157-93)
T 160-2009 Standard Method of Test for Length Change of Hardened Hydraulic Cement Mortar and Concrete
T 160-1997 Standard Method of Test for Length Change of Hardened Hydraulic Cement Mortar and Concrete
AASHTO T 153-2025 Standard Method of Test for Fineness of Hydraulic Cement by Air Permeability Apparatus
AASHTO T 160-2017 Standard Method of Test for Length Change of Hardened Hydraulic Cement Mortar and Concrete
AASHTO T 129-2022 Standard Method of Test for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste (ASTM Designation: C187-11ε1)
AASHTO T 129-2014(2018) Standard Method of Test for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste (ASTM Designation: C187-11ε1)
T129-1988 Standard Method of Test for Normal Consistency of Hydraulic Cement (Twentieth Edition; ASTM C187-86(1991)e1))
AASHTO T 119M/T 119-2018(2022) Standard Method of Test for Slump of Hydraulic Cement Concrete (ASTM Designation: C143/C143M-15a)
AASHTO T 119M/T 119-2011 Standard Method of Test for Slump of Hydraulic Cement Concrete (ASTM Designation: C143/C143M-10)
AASHTO T 119M/T 119-2013(2017) Standard Method of Test for Slump of Hydraulic Cement Concrete (ASTM Designation: C143/C143M-15a)

Korean Agency for Technology and Standards (KATS)

KS L 5117-2005(2015) Testing of method fineness of hydraulic cement by the 90 mm standard sieve
KS L 5112-2022 Test method for fineness of hydraulic cement by the 45 mm sieve
KS M ISO 868-2021 Plastics and ebonite－Determination of indentation hardness by means of a durometer(Shore hardness)
KS M ISO 868-2016(2021) Plastics and ebonite－Determination of indentation hardness by means of a durometer(Shore hardness)
KS M ISO 868-2016 Plastics and ebonite－Determination of indentation hardness by means of a durometer(Shore hardness)
KS M ISO 868:2011 Plastics and ebonite-Determination of indentation hardness by means of a durometer(Shore hardness)
KS M ISO 868:2016 Plastics and ebonite－Determination of indentation hardness by means of a durometer(Shore hardness)
KS L 5110-2021 Test method of density of hydraulic cement
KS M 7077-2006 BOARD-DETERMINATION OF STIFFNESS BY TABER STIFFNESS TESTER
KS M ISO 48-4-2024 Rubber, vulcanized or thermoplastic — Determination of hardness — Part 4: Indentation hardness by durometer method (Shore hardness)
KS L 5112-2017 Standard testing method for fineness of hydraulic cement by the 45 m sieve
KS M ISO 2039-2-2008(2023) Plastics － Determination of hardness － Part 2: Rockwell hardness
KS L 5117-2021 Standard test method for fineness of hydraulic cement by the 90 mm standard sieve
KS M ISO 2039-2-2008(2018) Plastics－Determination of hardness－Part 2：Rockwell hardness
KS L 5102-2021 Test method for standard consistency of hydraulic cement
KS M ISO 2039-2-2023 Plastics－Determination of hardness－Part 2：Rockwell hardness
KS M ISO 2039-2:2008 Plastics － Determination of hardness － Part 2: Rockwell hardness
KS F 2478-2013(2023) Test method measuring changes in height of cylindrical specimens from hydraulic-cement mortar
KS E ISO 5074-2018 Hard coal — Determination of Hardgrove grindability index
KS L 5105-2022 Test method for compressive strength of hydraulic cement mortar
KS L 5104-2022 Test method for tensile strength of hydraulic cement mortars
KS L 5105-2007(2017) Testing method for compressive strength of hydraulic cement mortar
KS E ISO 5074:2018 Hard coal — Determination of Hardgrove grindability index
KS F 2478-2013(2018) Test method measuring changes in height of cylindrical specimens from hydraulic-cement mortar
KS B 5532-1981 Rockwell T hardness test
KS M ISO 7619-1:2016 Rubber, vulcanized or thermoplastic － Determination of indentation hardness － Part 1: Durometer method(Shore hardness)
KS M ISO 7619-1:2011 Rubber, vulcanized or thermoplastic-Determination of indentation hardness-Part 1:Durometer method(Shore hardness)
KS M ISO 48:2008 Rubber, vulcanized or thermoplastic-Determination of hardness(hardness between 10 IRHD and 100 IRHD)
KS D ISO 3369-2011 Impermeable sintered metal materials and hardmetals－Determination of density
KS M ISO 48-5-2024 Rubber, vulcanized or thermoplastic — Determination of hardness — Part 5: Indentation hardness by IRHD pocket meter method

Associação Brasileira de Normas Técnicas

ABNT MB-251-1972 Asbestos cement pipe rubber ring hardness testing

Netherlands Institute for Standardization

NEN 6441-1979 Water -Determination of total hardness and calcium and magnesium content
NEN 6549-1988 Water for boiler plants Photometric determination of total hardness
NEN 3661-1988 Window frames - Air permeability, water tightness, rigidity and strength Requirements

GM Holden Ltd

HOLDEN HN 0163-1978 Determination of Indentation Hardness Durometer
HOLDEN HN 0163-2013 Determination of Indentation Hardness Durometer
HOLDEN HN 0165-2013 Micro Hardness Test
HOLDEN HN 0165-1978 Micro Hardness Test

International Organization for Standardization (ISO)

ISO 2783:1975 Ebonite — Determination of hardness by means of a durometer
ISO 868:1978 Plastics — Determination of indentation hardness by means of a durometer (Shore hardness)
ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
ISO 868:1985 Plastics and ebonite; Determination of indentation hardness by means of a durometer (Shore hardness)
ISO 1818:1975 Vulcanized rubbers of low hardness (10 to 35 IRHD); Determination of hardness
ISO 1400:1975 Vulcanized rubbers of high hardness (85 to 100 IRHD); Determination of hardness
ISO 48-4:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness)
ISO 7619:1997 Rubber - Determination of indentation hardness by means of pocket hardness meters
ISO 48:1979 Vulcanized rubbers; Determination of hardness (Hardness between 30 and 85 IRHD)
ISO 2039-2:1987 Plastics; Determination of hardness; Part 2 : Rockwell hardness
ISO 7619:1986 Rubber; Determination of indentation hardness by means of pocket hardness meters
ISO 48:1994 Rubber, vulcanized or thermoplastic - Determination of hardness (Hardness between 10 IRHD and 100 IRHD)
ISO 48-5:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 5: Indentation hardness by IRHD pocket meter method
ISO 48:2007 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD)
ISO 7619-1:2010 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness)
ISO 3350:1975 Wood; Determination of static hardness
ISO 16305:2005 | IDF 187:2005 Butter — Determination of firmness

Czech Standards Institute (UNMZ)

CSN 72 2220-1972 Determination of standard density amd of beginning setting of hydraulic limes
CSN ISO 6506:1993 Metallic materials. Hardness test. Brinell test
CSN 62 1431-1993 Rubber, plastics and ebonite. Determination of indentation hardness by means of a durometer (Shore hardness)
CSN 83 0520 Cast.4-1975 Physicochemical analysis of drinking water. Determination of hardness
CSN 99 4442-1989 Indenters for hardness testing machines Methods of verification
CSN 62 1433-1981 Vulcanized rubbers. Determination of hardness. (Hardness between 30 and 85 IRHD)
CSN 72 5126-1987 Determination of scratch hardness of surface accordíng to Mohs
CSN 22 4020-1981 Testing of the hardness by sand blasting method
CSN 72 2348-1983 Testing of caulking compounds for building purposes. Indentation hardness of elastomeric sealants by means of durometer by Shore a
CSN 67 3075-1956 Determine surface film hardness

Magyar Szabványügyi Testület

MI 14026/4-1971 Rubber belt detection, humidity detection, taste taking, separation hardness and water vapor detection
MSZ 18094/12-1979 Soil corrosion testing. Detection of moisture hardness in soil
MNOSZ 22302-1955 Hardness testing, artificial hardness testing, Bolti hammer
MSZ 13336/6-1972 Cardboard testing. Plate hardness measurement
MSZ KGST 2003-1979 Hardness measurement of powder metallurgy hard metal Rockwell hardness tester
MSZ 13336/3-1987 Cardboard testing. Determination of breaking hardness
MNOSZ 13594-1955 Determination of bending hardness of hard rubber
MSZ KGST 1770-1979 Hardness determination of cardboard grinding discs
MNOSZ 3252-1950 Stiffness test
MSZ 494-1967 Rubber hardness test
MSZ 5011-1979 Paper hardness testing
MNOSZ 2854-1956 Detergent hard water water tightness test
MSZ KGST 1769-1979 Determination of thickness expansion of cardboard
MSZ KGST 2004-1979 Vickers hardness measurement of powder metallurgy hard metals

Türk Standardları Enstitüsü

TS 2611-1977 EBON?TE - DETERMINATION OF HARDNESS BY MEANS OF A DUROMETER
TS 2875-1977 Vulcanized Rubbers of Low Hardness (10 To 35IRHD) Determination of Hardness
TS 2876-1977 Vulcanized Rubbers Of High Hardness (85 To 100 IRHD) Determination Of Hardness
TS 1989-1975 TEXTILE AUXILIARY PRODUCTS — DETERMINATION OF RES?STANCE TO WATER HARDNESS, ACIDS, AND ALKALIES

Ente Nazionale Italiano di Unificazione

UNI EN ISO 7980:2002 Water quality - Determination of calcium and magnesium - Atomic absorption spectrometric method
UNI ISO 3350:1985 Wood. Determination of static hardness.
UNI EN ISO 2039-2:2001 Plastics - Determination of hardness - Rockwell hardness
UNI ISO 3380:1983 Leather. Determination of shrinkage temperature.
UNI ISO 48-4:2019 Rubber, vulcanized or thermoplastic -- Determination of hardness -- Part 4: Indentation hardness by durometer method (Shore hardness)
UNI ISO 7619:2000 Rubber - Determination of indentation hardness by means of pocket hardness meters
UNI EN 23878:2003 Hardmetals - Vickers hardness test
UNI EN ISO 868:2005 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
UNI EN ISO 3887:2006 Steels - Determination of depth of decarburization
UNI EN 101:1992 Ceramica tiles. Determination of scratch hardness of surface according to Mohs.
UNI 10505:1996 Water intended for human consumption. Determination of the total hardness. EDTA titrimetric method.
UNI EN 12390-7:2009 Testing hardened concrete - Part 7: Density of hardened concrete

US Federal Contractor Registration (USFCR)

FCR FED FHC 1-1963 FINENESS OF HYDRAULIC CEMENT BY NOS. 100 AND 200 SIEVES, METHOD OF TEST FOR

Belgian Standards Institute

NBN 748-21-1971 Surface hardness measurement. Hardness index
NBN 432-1956 Hardness determination
NBN 304-1953 Hardness determination
NBN B 15-225-1984 Concrete testing, surface hardness measurement, hardness index
NBN-EN 101-1992 Ceramic tiles - Determination of scratch hardness of surface according to Mohs
NBN T 31-002-1976 Vulcanized rubbers - indentation hardness by means of a Shore duro-meter
NBN T 41-010-1977 MEASURING HARDNESS WITH THE BARCOL DUROMETER
NBN T 31-001-1976 Vulcanized rubbers - Determination of hardness (hardness between 30 and 85 I.R.H.D.)

Yugoslav Association for Standardization

JUS G.S2.525-1984 Plastics. Determination of indentation hardness by means of a durometer (Shore hardness)
JUS G.S2.125-1986 Rubber. Determination of Indentation hardness of a durometer (hardness Shore A and D)
JUS B.D8.064-1983 Ceramic tiles. Determination of hardness (by Mohs)
JUS G.S2.527-1984 Plastics. Determination of hardness by the ball indentation method. Rockwell hardness
JUS U.M1.015-1998 Concrete - Concrete hardened - Determination ofthe depth ofpenetration oftvater under pressure

Standards Norway

NS 9507:1985 Plastics — Determination of indentation hardness by means of a durometer (Shore hardness)
NS-EN ISO 868:1997 Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:1985)
NS-EN ISO 868:2003 Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
NS-EN 101:1991 Ceramic tiles — Determination of scratch hardness of surface according to Mohs
NS-EN 59:2016 Glass reinforced plastics — Determination of indentation hardness by means of a Barcol hardness tester
NS-EN ISO 2039-2:1999 Plastics — Determination of hardness — Part 2: Rockwell hardness (ISO 2039-2:1987)
NS-EN 12390-8:2009 Testing hardened concrete — Part 8: Depth of penetration of water under pressure

Society of Automotive Engineers (SAE)

SAE J417-2018 Hardness Tests and Hardness Number Conversions
SAE J417-1983 Hardness Tests and Hardness Number Conversions
SAE J417_198312 Hardness Tests and Hardness Number Conversions
SAE J417_201801 11/17/17Hardness Tests and Hardness Number Conversions

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 868:2015 Plastics and ebonite -- Determination of indentation hardness by means of a durometer (Shore hardness)
OS GSO 1466:2002 Metals hardness values tabels: test of tensile and hardness
OS GSO ISO 16305:2008 Butter- Determination of firmness
OS GSO 1248:2002 Rockwell for the determination of the hardness of organic paints
OS GSO ISO 7619-1:2014 Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness)
OS GSO 641:1996 METHODS OF TEST FOR DRINKING AND MINERAL WATER -- PART 5: DETERMINATION OF TOTAL HARDNESS, CALCIUM AND MAGNESIUM

Danish Standards Foundation

DANSK DS/EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
DS/EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
DS/ISO 1818:1979 Vulcanized rubber of low hardness (10 to 35 IRHD). Determination of hardness
DS/ISO 7619:1989 Rubber. Determination of indentation hardness by means of pocket hardness meters
DANSK DS/EN ISO 2039-2:1999 Plastics - Determination of hardness - Part 2: Rockwell hardness
DS/ISO 1400:1979 Vulcanized rubbers of high hardness (85 to 100 IRHD). Determination of hardness
DANSK DS/EN 23878:1994 Hardmetals – Vickers hardness test
DS/ISO 48:1989 Vulcanized rubbers. Determination of hardness (Hardness between 30 and 85 IRHD)
DS/ISO 3878:1994 Hardmetals - Vickers hardness test
DANSK DS/ISO 3878:1994 Hardmetals - Vickers hardness test
DS/EN ISO 2039-2:1999 Plastics - Determination of hardness - Part 2: Rockwell hardness
DANSK DS/ISO 16305:2005 Butter - Determination of the firmness
DS/EN 13286-41:2003 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
DANSK DS/EN 59:2016 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
DS/ISO 16305:2005 Butter - Determination of the firmness
DANSK DS/EN ISO 6506-4:2014 Metallic materials – Brinell hardness test – Part 4: Table of hardness values

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 868:2016 Plastics and ebonite -- Determination of indentation hardness by means of a durometer (Shore hardness)
BH GSO ISO 3878:2017 Hardmetals -- Vickers hardness test
BH GSO ISO 2039-2:2022 Plastics — Determination of hardness — Part 2: Rockwell hardness

British Standards Institution (BSI)

BS EN ISO 2039-2:1992 Determination of Rockwell hardness. Rockwell hardness. Rockwell hardness
BS EN ISO 2039-2:2000 Determination of Rockwell hardness - Rockwell hardness - Rockwell hardness
BS EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
BS EN ISO 868:1998 Plastics and ebonite. Determination of indentation hardness by means of a a durometer (Shore hardness)
BS 2782-3 METHOD 365B:1981 Methods of testing plastics. Mechanical properties-Determination of indentation hardness by means of a durometer (Shore hardness)
BS ISO 19979:2018 Rubber, vulcanized or thermoplastic. Determination of hardness. Indentation hardness by durometer method (Shore hardness)
BS EN 23878:1993 Hardmetals. Vickers hardness test
BS ISO 48-4:2018 Rubber, vulcanized or thermoplastic. Determination of hardness. Indentation hardness by durometer method (Shore hardness)
BS EN 12829:2011 Surface active agents. Preparation of water with known calcium and magnesium hardness
BS EN ISO 6507-4:2018 Metallic materials. Vickers hardness test. Tables of hardness values
BS EN 12390-8:2019 Testing hardened concrete. Depth of penetration of water under pressure
BS EN 13286-41:2021 Unbound and hydraulically bound mixtures. Test method for the determination of the compressive strength of hydraulically bound mixtures
BS EN ISO 4545-4:2018 Metallic materials. Knoop hardness test. Table of hardness values
BS ISO 7619-1:2004 Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Durometer method (Shore hardness)
BS ISO 48-5:2018 Rubber, vulcanized or thermoplastic. Determination of hardness. Indentation hardness by IRHD pocket meter method
BS ISO 7619-1:2010 Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Durometer method (Shore hardness)
BS ISO 7619-1:2004+A1:2008 Rubber, vulcanized or thermoplastic. Determination of indentation hardness-Durometer method (Shore hardness)
BS ISO 48-7:2018 Rubber, vulcanized or thermoplastic. Determination of hardness. Apparent hardness of rubber-covered rollers by Shore-type durometer method
BS 903-A57:1989 Physical testing of rubber-Determination of indentation hardness by means of pocket hardness meters
BS ISO 48-3:2018 Rubber, vulcanized or thermoplastic. Determination of hardness. Dead-load hardness using the very low rubber hardness (VLRH) scale
09/30194594 DC BS ISO 22394. Hardmetals. Knoop hardness test
BS ISO 589:2008 Hard coal. Determination of total moisture
BS 240:1986 Brinell hardness test and for verification of Brinell hardness testing machines

GM North America

GM GM9053P-1989 Hardness Test and Hardness Number Conversions
GM GM9074P-1989 Hardness Testing - Correction for Rounds
GM GM9054P-1988 Microhardness Testing

Bureau of Indian Standards

IS 4031-6-1988 Methods of physical tests for hydraulic cement: Part 6 Determination of compressive strength of hydraulic cement (other than masonry cement)
IS 4031-11-1988 Methods of physical tests for hydraulic cement: Part 11 Determination of density
IS 12783-1989 Carbide - Vickers Hardness Test
IS 4031-15-1991 Methods of physical test for hydraulic cement Part 15 Determination of fineness by wet sieving
IS 4031-1-1996 Methods of physical tests for hydraulic cement: Part 1 Determination of fineness by dry sieving
IS 4031-7-1988 Methods of physical tests for hydraulic cement: Part 7 Determination of compressive strength of masonry cement
IS 4031-4-1988 Methods of physical tests for hydraulic cement: Part 4 Determination of consistency of standard cement paste
IS 3025 Pt.21-1983 Methods of sampling and testing of water and wastewater (physical and chemical) Part 21 Total hardness
IS 3400-2-4-2022 Methods of Test for Rubber, Vulcanized or Thermoplastic Part 2 Determination of Hardness Section 4 Indentation Hardness by Durometer Method (Shore Hardness)
IS 13360-5-11-2013 Plastics - Methods of Testing - Part 5 : Mechanical Properties - Section 11 : Determination of Indentation Hardness of Plastics by Means of Durometer (Shore Hardness)

German Institute for Standardization

DIN EN ISO 868:2003-10 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003); German version EN ISO 868:2003
DIN EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003); German version EN ISO 868:2003
DIN ISO 48-4 E:2020-08 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness)
DIN ISO 48-4:2021-02 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness) (ISO 48-4:2018)
DIN ISO 48-4:2021 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness) (ISO 48-4:2018)
DIN EN ISO 2039-2:2000 Plastics - Determination of hardness - Part 2: Rockwell hardness (ISO 2039-2:1987); German version EN ISO 2039-2:1999
DIN 10331:1996 Determination of the hardness of butter
DIN ISO 48-4:2020-08 Draft Document - Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness) (ISO 48-4:2018); Text in German and English
DIN EN 12390-8:2009-07 Testing hardened concrete - Part 8: Depth of penetration of water under pressure
DIN EN 13286-41:2022 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
DIN EN 13286-41:2020 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures; German and English version prEN 13286-41:2020
DIN EN ISO 4545-4:2018-05 Metallic materials - Knoop hardness test - Part 4: Table of hardness values (ISO 4545-4:2017); German version EN ISO 4545-4:2018
DIN EN 59:2016-06 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester; German version EN 59:2016
DIN 10331:1996-03 Determination of the hardness of butter
DIN EN 59:1977 Glass Reinforced Plastics; Measurement of Hardness by Means of a Barcol Impressor
DIN 51224:1976 Hardness testing machine with depth measurement device
DIN EN ISO 6507-4:2018-07 Metallic materials - Vickers hardness test - Part 4: Tables of hardness values (ISO 6507-4:2018); German version EN ISO 6507-4:2018
DIN 10331:1985 Determination of the hardness of butter
DIN ISO 48:2003 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD) (ISO 48:1994 + Amd. 1:1999)
DIN EN 13286-41:2022-02 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures; German version EN 13286-41:2021
DIN EN ISO 6506-4:2015-02 Metallic materials - Brinell hardness test - Part 4: Table of hardness values (ISO 6506-4:2014); German version EN ISO 6506-4:2014
DIN EN 12390-8:2019 Testing hardened concrete - Part 8: Depth of penetration of water under pressure
DIN 50190-3:1979-03 Hardness depth of heat-treated parts; determination of the effective depth of hardening after nitriding

European Committee for Standardization (CEN)

EN ISO 868:1997 Plastics and Ebonite - Determination of Indentation Hardness by Means of a Durometer (Shore Hardness) ISO 868: 1985
prEN 667-1992 Rubber floor coverings; determination of indentation hardness by means of a durometer (Shore A hardness)
EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
EN ISO 2039-2:1999 Plastics - Determination of Hardness - Part 2: Rockwell Hardness
EN 13286-43:2003 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
EN 13286-41:2003 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
EN 13286-3:2003 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
EN 13286-4:2003 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures

GCC Standardization Organization

GSO ISO 868:2015 Plastics and ebonite -- Determination of indentation hardness by means of a durometer (Shore hardness)
GSO 1466:2002 Metals hardness values tabels: test of tensile and hardness
GSO ISO 3878:2015 Hardmetals -- Vickers hardness test
GSO ISO 2039-2:2021 Plastics — Determination of hardness — Part 2: Rockwell hardness
GSO ASTM C204:2024 Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
OS GSO ASTM C204:2024 Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
GSO 641:1996 METHODS OF TEST FOR DRINKING AND MINERAL WATER -- PART 5: DETERMINATION OF TOTAL HARDNESS, CALCIUM AND MAGNESIUM
GSO ISO 4545-4:2013 Metallic materials -- Knoop hardness test -- Part 4: Table of hardness values
GSO ISO 7619-1:2014 Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness)
BH GSO ISO 16305:2024 Butter- Determination of firmness
GSO ISO 2896:2015 Rigid cellular plastics -- Determination of water absorption

Thai Industrial Standards Institute (TISI)

TIS 2245-2005 Plastics and ebonite.determination of indentation hardness by means of a durometer (shore hardness)
TIS 15.5-1976 Standard for portland cement.part 5: method of test for fineness of portland cement by the turbidimeter
TIS 15.3-4-1976 Standard for portland cement.part 3: method of test for fineness of hydraulic cement by the 150 ?m and 75 ?m sieves.part 4: method of test for fineness of hydraulic cement by the 45 ?m sieve

COMMISSION FOR THE STANDARDS, METROLOGY AND QUALITY OF VIETNAM (STAMEQ)

TCVN 4502-2008 Plastics and ebonite.Determination of indentation hardness by means of a durometer (Shore hardness)
TCVN 7713-2007 Cement.Determination of length change of hydraulic cement mortars exposed to a sulfate solution
TCVN 5047-1990 Hardmetals.Method of determination of hardness Vicker
TCVN 5046-1990 Hardmetals.Method of determination of hardness Roowell

Association Francaise de Normalisation

NF EN ISO 868:2003 Plastics and ebonite - Determination of penetration hardness using a durometer (Shore hardness)
NF T51-174:1998 Plastics and ebonite. Determination of identation hardness by means of a durometer (Shore hardness).
NF T51-174*NF EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
NF T46-029:1976 Vulcanized rubbers of high hardness (85 to 100 irhd). Determination of hardness.
NF T46-028:1976 Vulcanized rubbers of low hardness (10 to 35 irhd). Determination of hardness.
NF EN ISO 6769:2022 Vitrified enamels - Determination of surface hardness according to the Mohs scale
NF T51-024-2:1994 PLASTICS. DETERMINATION OF HARDNESS. PART 2 : ROCKWELL HARDNESS.
NF ISO 48-4:2018 Vulcanized or thermoplastic rubber - Determination of hardness - Part 4: penetration hardness by the durometer method (Shore hardness)
NF T46-003-4*NF ISO 48-4:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4 : indentation hardness by durometer method (Shore hardness)
NF EN ISO 2039-2:1999 Plastics - Determination of hardness - Part 2: Rockwell hardness
NF EN ISO 15184:2020 Paints and varnishes - Determination of film hardness using the pencil hardness test
NF T51-024-2*NF EN ISO 2039-2:1999 Plastics. Determination of hardness. Part 2 : Rockwell hardness.
NF EN ISO 3369:2010 Waterproof sintered metal materials and hard metals - Determination of density
NF G52-008:1976 Determination of hardness of leather.

Japanese Industrial Standards Committee (JISC)

JIS K 7215:1986 Testing methods for durometer hardness of plastics
JIS K 7202-2:2001 Plastics -- Determination of hardness -- Part 2: Rockwell hardness
JIS P 8143:2009 Paper -- Determination of stiffness -- Clark stiffness tester method

Swedish Institute for Standards

SS-EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 8668:2003)
SS-ISO 7619:1995 Rubber - Determination of indentation hardness bymeans of pocket hardness meters
SS 168405:1982 Glass reinforced plastics - Measurement of hardness by means of a Barcol impressor
SIS SS 13 75 33-1980 Concrete testing — Harde ned mortar for injection — Compressive strength
SIS 11 01 79-1964 Sampling for hardnes.i test of cemented carbides
SIS SS 13 75 33-1984 Concrete testing — Hardened mortar for injection — Compressive strength
SIS 11 25 12 E-1975 ROCKWELL HARDNESS TEST
SIS 16 22 01-1962 Rubber. Determination of hardness
SIS 11 25 12 E-1976 ROCKWELL HARDNESS TEST
SIS SS 18 71 55-1984 Hard coal - Determination of total moisture
SS-EN 23878:1993 Hardmetals - Vickers hardness test (ISO 3878:1983)
SIS SS 16 13 53-1984 Plastics — Determination of hardness by the ball indentation method — Part 2: Rockwell hardness
SIS SS 16 84 05-1982 Glass reinforced plastics - Measurement of hardness by means of a Barcol im pressor
SS-EN ISO 2039-2:1999 Plastics - Determination of hardness - Part 2: Rockwell hardness (ISO 2039-2:1987)

Finnish Standards Institute

SFS-ISO 868 E:1986 This standard is approved in English
SFS 3133-1979 plastic pipe. Hardness determination

Lithuanian Standards Office

LST EN ISO 868:2004 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
LST EN 13286-41-2003 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
LST EN 23878-2000 Hardmetals - Vickers hardness test (ISO 3878:1983)

American National Standards Institute （ANSI)

ANSI/TAPPI T834 om-2012 Determination of containerboard roll hardness
ANSI/ASTM A833:1996 Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers

Portuguese Institute of Quality

NP ISO 7619:2001 Rubber Determination od indentation hardness by means of packet hardness meters
NP 141-1958 Metal. Hardness test

American Water Works Association (AWWA)

AWWA ACE70632 Simultaneous Compliance for Hard Water: Softening Isn't Only about Hardness Removal
AWWA JAW69599 Journal AWWA — Developing Effluent Limitations for Hardness-Based Metals Considering Dynamic Variability of Effluent and Receiving Water Hardness
AWWA WQTC53007 Effects of Temperature, Water Hardness, and Recirculation on Copper Corrosion

Indonesia Standards

SNI 06-4999-1999 Determination of hardness of vulcanized rubber by shore durometer
SNI ISO 2039-2:2011 Plastics - Determination of hardness - Part 2: Rockwell hardness
SNI 19-0407-1998 Rockwell hardness test methods (scales A - B - C - D - E - F - G - H - K )
SNI 06-0481-1989 Polypropylene hardness test

Association of German Mechanical Engineers

VDI/VDE 2616-1978 Hardness testing of metallic materials; selection criteria: methods of hardness testing@ application@ advantages-disadvantages@ range of hardness test@ error limits

GM Europe

GME 60256-2009 Determination of Ball Pressure Hardness of Elastomers International Rubber Hardness Scale (IRHD) Microhardness Test (English/German)

South African Bureau of Standard

SANS 7619:2003 Rubber - Determination of indentation hardness by means of pocket hardness meters
SANS 10048:2003 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD)

Asociación Española de Normalización (AENOR)

INTA 11 05 21 Brinell hardness test

Pakistan Standards & Quality Control Authority

PS 413-1964 DETERMINATION OF HARDNESS OF RUBBERS

Chile Instituto Nacional de Normalización

INDITECNOR 31-7ch-1956 Superficial Rockwell Hardness Test and Rockwell Hardness Test

Austrian Standards

ONORM EN 59-1978 Glass reinjorced plastics. Measu.rem.ent of hardness by means of a barcol-impressor
OENORM EN 13286-41-2021 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
ONORM C 9433 Teil.2-1982 Testing of elastomers; determination of ball indentation hardness (IRHD) of soft rubber; nricro hardness fest

Instituto Uruguayo de Normas Técnicas

UNIT 364-1974 How to measure hardness

Military Standards (MIL-STD)

MIL MIL-B-24617-1983 BOILER FEEDWATER AND BOILER WATER EDTA HARDNESS TEST KIT AND COMPONENTS (S/S BY MIL-E-24617A)

International Dairy Federation (IDF)

IDF 187-2005 Butter - Determination of firmness

US-Unspecified Preparing Activity

DI-EMCS-81855-2011 HIGH-ALTITUDE EMP (HEMP) HARDNESS MAINTENANCE AND HARDNESS SURVEILLANCE (HM/HS) PLAN

Others: