mobile phase acidity

mobile phase acidity, Total:141 items.

The international standard classification for "mobile phase acidity" includes: Ceramics in general , Thermoplastic materials .

The Chinese standard classification for "mobile phase acidity" includes: Daily use glass, ceramic, enamel and plastic products in general , Ceramic and glass in general , Power semiconductor device and parts , Generating unit , Synthetic resin and plastic .

Professional Standard - Light Industry

QB/T 1545-2015 Test method for relative viscosity||relative liquidity and thixotropy of ceramic
QB/T 1545-1992 Measurement Method for Relative Viscosity, Flowability and Thixotropy of Ceramic Slurry

Professional Standard - Ocean

HY/T 0344-2022 Determination of Trace Active Phosphate in Seawater Flow Analysis-Phosphomolybdenum Blue Solid Phase Extraction-Spectrophotometry

Guangdong Provincial Standard of the People's Republic of China

DB44/T 1761-2015 150A three-phase AC charging communication protocol for electric vehicles
DB44/T 2338-2021 Qualitative analysis of pathogenic nucleic acid in experimental animals by liquid-phase chip method
DB44/T 1760-2015 Electric vehicle 150A three-phase AC charging interface

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 20996.3-2020 Performance of high-voltage direct current (HVDC) systems with line-commutated converters—Part 3:Dynamic conditions

Fujian Provincial Standard of the People's Republic of China

DB35/T 1144-2011 Determination of inorganic nitrogen and active phosphate in seawater by flow chemical analysis

Group Standards of the People's Republic of China

T/CI 115-2022 Single phase brushless DC motor for refrigeration equipment

工业和信息化部

HG/T 5997-2022 Gas cyclone-liquid jet gas purifier

Professional Standard - Machinery

JB/T 2729-1999 3 phases 4 wires plug & socket for AC movable power plant
JB/T 2729-2020 Three-phase four-pole plug and socket for AC mobile power station

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 21060-2007 Plastics—Determination of pourability

Taiwan Provincial Standard of the People's Republic of China

CNS 14842-2004 Method of test for slump flow of high flowing concrete

Inner Mongolia Provincial Standard of the People's Republic of China

DB15/T 1837-2020 Determination of Nitrate Nitrogen in Farmland Irrigation Water by Flow Injection Method

Korean Agency for Technology and Standards (KATS)

KS B ISO 6072-2013 Hydraulic fluid power－Compatibility between elastomeric materials and fluids
KS B ISO 6072-2002(2012) Hydraulic fluid power－Compatibility between elastomeric materials and fluids
KS I ISO 2943-2020 Hydraulic fluid power－Filter elements－Verification of material compatibility with fluids
KS F 2410-1977 TESTING METHOD FOR FLOW OF CONCRETE BY THE flow board
KS I ISO 16264-2008(2018) Water quality－Determination of soluble silicates by flow analysis (FIA and CFA) and photometric detection
KS K 0145-2008 Test method for intercompatibility of basic dyes for acrylic fibers
KS B 6931-2005(2010) Pneumatic fluid power－Determination of flow-ratecharacteristics of pneumatic control valves
KS M 3978-2019 Magnetorheological elastomer — Determination of dynamic magnetorheological properties by shear vibration
KS I ISO 16264-2018 Water quality－Determination of soluble silicates by flow analysis (FIA and CFA) and photometric detection
KS B ISO 23181:2009 Hydraulic fluid power－Filter elements－Determination of resistance to flow fatigue using high viscosity fluid
KS B 6931-2013 Pneumatic fluid power－Determination of flow-ratecharacteristics of pneumatic control valves
KS I ISO 22743-2009(2019) Water quality－Determination of sulfates－Method by continuous flow analysis(CFA)
KS B 6931-2005 Pneumatic fluid power-Determination of flow-ratecharacteristics of pneumatic control valves
KS M ISO 14678:2014 Adhesives — Determination of resistance to flow(sagging)
KS H ISO 5508-2023 Animal and vegetable fats and oils－Analysis by gas chromatography of methyl esters of fatty acids

GM North America

GM GMP.PC.016-1992 Polycarbonate - High Heat, High Flow, Impact Modified
GM GMP.PBT.030-1998 PBT - General Purpose, High Flow
GM GMP.PPE.007-1990 Polyphenylene Ether - High Flow
GM GMP.PC.016-2013 Polycarbonate - High Heat, High Flow, Impact Modified (Issue 2; Do Not Use on New Programs; No Replacement)

SCC

BS 2610:1955 Fluidity of cotton, rayons & cellulose acetate
DIN ISO 3724:1990 Hydraulic fluid power; filter elements; verification of flow fatigue characteristics; identical with ISO 3724:1976
UNE 118027:2007 Tobacco and tobacco products. Determination of nitrates. Analysis methods by continuos flow and liquid cromatography.
CAN/CGSB 48.3-1992 Radiographic testing of steel castings
NS 4170:2008 Flow of person-related information in education
AS C46:1927 Liquid starters for electric motors (D.C. and A.C. 3-phase induction with slip rings)
BS 5267:1976 Specification. Capacitors for single phase a.c. motors
DIN 14680/A1 E:2017 Draft Document - Firefighting and fire protection - Hand-operated cable reels - A.C., three-phase A.C. and D.C.
AWWA JAW56401 Journal AWWA — Optimizing Ferric Sulfate Coagulation of Algae with Streaming Current Measurements
DANSK DS/EN ISO 4534:2011 Vitreous and porcelain enamels - Determination of fluidity behaviour - Fusion flow test
VDI/VDE 2176-2007 Flow characteristics of control valves and their determination
DANSK DS/EN ISO 16264:2004 Water quality - Determination of soluble silicates by flow analysis (FIA and CFA) and photometric detection
NS-EN 16160:2012 Animal feeding stuffs — Determination of Hydrocyanic acid by HPLC
BS ISO 3724:1976 Hydraulic fluid power. Filter elements. Verification of flow fatigue characteristics
DANSK DS/EN ISO 6186:1998 Plastics - Determination of pourability

NO-SN

NS 5922-1981 Hydraulic fluid power - Filter elements - Verification of material compatibility with fluids

Society of Automotive Engineers (SAE)

SAE ARP1288A-1998 Placarding of Aircraft Hydraulic Equipment to Identify Phosphate Ester Fluid Compatibility
SAE ARP4028-1994 Aircraft/Engine Fuel Pump Two Phase (Slugging Flow) Inlet Performance Test and Evaluation
SAE AS8020-2017 Minimum Performance Standards for Engine Driven D.C. Generators/Starter-Generators and Associated Voltage Regulators
SAE AS8020-1980 Minimum Performance Standards for Engine Driven D.C. Generators/ Starter-Generators and Associated Voltage Regulators
SAE ARP4028-2020 Aircraft/Engine Fuel Pump Two Phase (Slugging Flow) Inlet Performance Test and Evaluation
SAE J1536-1995 Two-Stroke-Cycle Engine Oil Fluidity/Miscibility Classification

SAE - SAE International

SAE ARP1288B-2012 Placarding of Aircraft Hydraulic Equipment to Identify Phosphate Ester Fluid Compatibility
SAE ARP1288A-1992 Placarding of Aircraft Hydraulic Equipment to Identify Phosphate Ester Fluid Compatibility
SAE J1536-2017 Two-Stroke-Cycle Engine Oil Fluidity/Miscibility Classification
SAE J1536-1988 Two-Stroke-Cycle Engine Oil Miscibility/Fluidity Classification

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE TO-98-3-4-1998 Heat Transfer Characteristics and Correlations for R-410A Flowing Inside a Horizontal Smooth Tube
ASHRAE 4277-1999 Empirical Correlations for the Modeling of R-134a Flow Through Adiabatic Capillary Tubes
ASHRAE SF-98-28-3-1998 Flow Characteristics of Three-Dimensional Wall Jets
ASHRAE FUNDAMENTALS IP CH 5-2017 Two-Phase Flow
ASHRAE FUNDAMENTALS IP CH 4-1993 Two-Phase Flow
ASHRAE FUNDAMENTALS IP CH 5-2013 Two-Phase Flow
ASHRAE FUNDAMENTALS IP CH 4-2001 Two-Phase Flow
ASHRAE FUNDAMENTALS IP CH 5-2009 TWO-PHASE FLOW
ASHRAE FUNDAMENTALS SI CH 5-2009 TWO-PHASE FLOW
ASHRAE FUNDAMENTALS SI CH 4-2001 Two-Phase Flow
ASHRAE FUNDAMENTALS SI CH 5-2013 Two-Phase Flow
ASHRAE FUNDAMENTALS IP CH 4-1997 Two-Phase Flow
ASHRAE FUNDAMENTALS SI CH 5-2017 Two-Phase Flow
ASHRAE FUNDAMENTALS SI CH 4-1993 Two-Phase Flow
ASHRAE FUNDAMENTALS SI CH 4-2005 Two-Phase Flow
ASHRAE FUNDAMENTALS SI CH 4-1997 Two-Phase Flow
ASHRAE FUNDAMENTALS IP CH 4-2005 Two-Phase Flow
ASHRAE 4505-2002 Flow Boiling of CO2 with Miscible Oil in Microchannels
ASHRAE 3742-1994 Characteristic Study of Sprayed Fluid Flow in a Tube Bundle
ASHRAE SA-96-1-1-1996 Airflow Characteristics of Jet Expansion for Nonisothermal Flow Conditions

ESDU - Engineering Sciences Data Unit

TM 4-1972 Correlations for some aerodynamic characteristics of aerofoils in incompressible inviscid flow

International Federation of Trucks and Engines

NAVISTAR CEMS GT-16-2015 VOID - Chromic Acid Compatibility Test

British Standards Institution (BSI)

BS 2782-7 Method 720B:1979 Methods of testing plastics - Rheological properties - Cup flow of phenolic and alkyd moulding materials
BS ISO 15117-1:2004 Coal flow properties - Bin flow
BS ISO 23181:2007 Hydraulic fluid power - Filter elements - Determination of resistance to flow fatigue using high viscosity fluid
BS EN ISO 16264:2004(2009)*BS 6068-2.78:2002 Water quality — Determination of soluble silicates by flow analysis (FIA and CFA) and photometric detection
BS EN ISO 16264:2004 Water quality. Determination of soluble silicates by flow analysis (FIA and CFA) and photometric detection
BS EN ISO 4534:2010(2014) Vitreous and porcelain enamels — Determination of fluidity behaviour — Fusion flow test
BS EN ISO 4534:2010 Vitreous and porcelain enamels. Determination of fluidity behaviour. Fusion flow test
BS EN ISO 4534:2011 Vitreous and porcelain enamels. Determination of fluidity behaviour. Fusion flow test
PD ISO/TS 21354:2020 Measurement of multiphase fluid flow

German Institute for Standardization

DIN 14680:2007 Hand-operated cable reels - A.C., three-phase A.C. and D.C.
DIN 14680-2:1984 Hand-operated cable reels for a.c. and three-phase a.c.
DIN EN ISO 4534:2011-04 Vitreous and porcelain enamels - Determination of fluidity behaviour - Fusion flow test (ISO 4534:2010); German version EN ISO 4534:2010
DIN EN ISO 16264:2004 Water quality - Determination of soluble silicates by flow analysis (FIA and CFA) and photometric detection (ISO 16264:2002); German version EN ISO 16264:2004
DIN EN 16160:2012-05 Animal feeding stuffs - Determination of Hydrocyanic acid by HPLC; German version EN 16160:2012
DIN ISO 22743:2015-08 Water quality - Determination of sulfates - Method by continuous flow analysis (CFA) (ISO 22743:2006 + Cor. 1:2007)

Defense Logistics Agency

DLA SMD-5962-95544 REV A-2009 MICROCIRCUIT, LINEAR, MOTOR DRIVER, BRUSHLESS DC, THREE PHASE, MONOLITHIC SILICON

AENOR

UNE 118027:2013 Tobacco and tobacco products. Determination of nitrates. Analysis methods by continuos flow and liquid cromatography.

GSO

OS GSO ISO 16264:2008 Water quality-Determination of soluble silicates by flow analysis and photomerric detection
GSO ISO 4534:2013 Vitreous and porcelain enamels -- Determination of fluidity behaviour -- Fusion flow test
BH GSO ISO 4534:2016 Vitreous and porcelain enamels -- Determination of fluidity behaviour -- Fusion flow test
GSO ISO/TS 21354:2023 Measurement of multiphase fluid flow
BH GSO ISO/TS 21354:2023 Measurement of multiphase fluid flow

BSI

BS 140:1923 Liquid starters for electric motors (d.c and a.c-phase 3 induction with slip rings)

Association Francaise de Normalisation

NF EN 15981:2011 Mobilité des apprenants européens - Informations relatives aux résultats obtenus (EuroLMAI)
NF E48-706*NF ISO 23181:2007 Hydraulic fluid power - Filter elements - Determination of resistance to flow fatigue using high viscosity fluid
NF EN ISO 16264:2004 Water quality - Determination of soluble silicates by flow analysis (FIA and CFA) and photometric detection
NF ISO 6358-3:2015 Pneumatic transmissions - Determination of the flow characteristics of components crossed by a compressible fluid - Part 3: method of calculating stationary flow characteristics of assemblies
NF EN ISO 6186:1998 Plastics - Determination of flowability
NF EN 16160:2012 Animal feed - Determination of hydrocyanic acid by HPLC

DIN

DIN 14680:2016 Firefighting and fire protection - Hand-operated cable reels - A.C., three-phase A.C. and D.C.
DIN 14680:2018 Firefighting and fire protection - Hand-operated cable reels - A.C., three-phase A.C. and D.C.

ITE - Institute of Transportation Engineers

VHS-021-1995 Building Mobility

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE OR-05-10-2-2005 Thermal and Hydraulic Characteristics of Brazed Plate Heat Exchangers - Part I: Review of Single-Phase and Two-Phase Adiabatic and Flow Boiling Characteristics
ASHRAE FUNDAMENTALS IP CH 5-2021 TWO-PHASE FLOW
ASHRAE FUNDAMENTALS SI CH 5-2021 Two-Phase Flow

Standard Association of Australia （SAA）

AS 3880:2017 Flow properties of coal

BE-NBN

NBN E 48-113-1988 Hydraulic transmission. Fluid and elastomer compatibility

(U.S.) Ford Automotive Standards

FORD WSS-M4D1052-A1-2013 POLYCARBONATE (PC), OPTICAL GRADE, HIGH MELT FLOW, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***

International Organization for Standardization (ISO)

ISO 23181:2007 Hydraulic fluid power - Filter elements - Determination of resistance to flow fatigue using high viscosity fluid
ISO 6186:1998 Plastics - Determination of pourability

Natural Gas Processor's Association (NGPA)

GPA RR-118-1990 GPSWAT GPA Sour Water Equilibria Correlation and Computer Program

IN-BIS

IS 996-1979 Specification for single-phase small AC and general purpose motors
IS 722 Pt.3-1977 Specification for alternating current meters Part III Three-phase full-current and transformer-driven and single-phase transformer-driven power meters Class 2

CO-ICONTEC

ICONTEC 1775-1982 Related Class C tests for mechanical products, centrifugal pumps, axial flow pumps and mixed flow pumps

Danish Standards Foundation

DS/EN ISO 4534:2011 Vitreous and porcelain enamels - Determination of fluidity behaviour - Fusion flow test
DS/EN ISO 16264:2004 Water quality - Determination of soluble silicates by flow analysis (FIA and CFA) and photometric detection
DS/EN ISO 6186:1999 Plastics - Determination of pourability
DS/ISO 22743/Corr.1:2007 Water quality - Determination of sulfates - Method by continuous flow analysis (CFA)

PL-PKN

PN M73052-1990 Hydraulic fluids power Compatibility between elastomeric materials and fluids

GM Europe

GME GMI 60284-2007 Ageing Resistance / Brake Fluid Compatibility of Brake Hoses (English/German; This standard may be applied only for current projects incl. Global Epsilon e (37##). It is Superceded for all future projects and replaced by GMW14361.)

American Society for Testing and Materials (ASTM)

ASTM C639-95 Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
ASTM C639-15(2020) Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
ASTM C639-01 Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants