How to determine dissolution limit

How to determine dissolution limit, Total:94 items.

The international standard classification for "How to determine dissolution limit" includes: Medical Sciences and health care facilities in general , Safety of machinery , Application of statistical methods .

The Chinese standard classification for "How to determine dissolution limit" includes: Beverages in general , Marking, packaing, transport and storage , Hygiene, safety and labor protection , Mathematics .

Professional Standard - Machinery

JB/T 20187-2017 Dissolution determination device

Professional Standard - Agriculture

2362药典二部-2010 APPENDIX X C DISSOLUTION DETERMINATION
137药典四部-2015 0900 Property inspection method 0931 Dissolution and release test method
118药典四部-2020 0900 Property inspection method 0931 Dissolution and release test method
841兽药典一部-2015 Appendix Contents 0900 Property Inspection Method 0931 Dissolution and Release Determination Method

Group Standards of the People's Republic of China

T/CMA YX129-2024 Calibration Method for Dissolution Testers

Professional Standard - Commodity Inspection

SN/T 0922-2000 Method for the determination of alkalinity of water-soluble ash of tea for import and export

Professional Standard - Pharmaceutical Packaging

YBB 0017-2005 Release of lead cadmium arsenic and antimony-permissible limits
YBB 0018-2005 Standard permissible limits of lead and cadmium release from medicinal ceramic

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 18153-2000 Safety of machinery--Temperatures of touchable surfaces--Ergonomics data to establish temperature limit values for hot surfaces
GB/T 33260.5-2018 Capability of detection—Part 5:Methodology in the linear and nonlinear calibration cases

Professional Standard - Medicine

YY/T 0188.10-1995 Operating methods for the tests and assays of drugs Part 10:Methods of the dissolution test and the drug release for the preparations

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 33260.2-2018 Capability of detection—Part 2:Methodology in the linear calibration case

Military Standard of the People's Republic of China-General Armament Department

GJB 1485-1992 Precision, accuracy and uncertainty of material physical property testing methods

ITE - Institute of Transportation Engineers

LP-409-2000 Procedure for Determining Work Zone Speed Limits

CZ-CSN

CSN 62 1115-1992 Rubber - Dissolution by acid digestion

US-FCR

FCR COE ETL 1110-2-253-1980 MEASUREMENT OF DISSOLVED GASES TO DETERMINE THE DEGREE OF NITROGEN SUPERSATURATION

International Organization for Standardization (ISO)

ISO 10980:1995 Validation of the strength of reference solutions used for measuring concentrations
ISO/IEC Guide 98-3:2008/Suppl 2:2011 Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) — Supplement 2: Extension to any number of output quantities
ISO 5725-4:1994 Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method
ISO 1191:1975 Plastics — Polyethylenes and polypropylenes in dilute solution — Determination of viscosity number and of limiting viscosity number
ISO/TS 23471:2022 Experimental designs for evaluation of uncertainty — Use of factorial designs for determining uncertainty functions

Korean Agency for Technology and Standards (KATS)

KS A ISO 10980:2012 Validation of the strength of reference solutions used for measuring concentrations
KS M ISO 5351:2020 Pulps — Determination of limiting viscosity number in cupri-ethylenediamine(CED) solution
KS Q ISO/IEC GUIDE 98-3-2022 Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement
KS Q ISO/IEC GUIDE 98-3:2017 Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement
KS C CISPR TR 16-4-1-2012(2017) Specification for radio disturbance and immunity measuring apparatus and methods－Part 4-1：Uncertainties, statistics and limit modelling－Uncertainties in standardized EMC tests

SCC

CIE 198:2011 Determination of Measurement Uncertainties in Photometry
DANSK DS/EN 1839:2017 Determination of the explosion limits and the limiting oxygen concentration (LOC) for flammable gases and vapours
AWWA ACE65613 Air or Particles — What Are the Turbidity Spikes in My Membrane Effluent
DIN EN 1839 E:2014 Draft Document - Determination of explosion limits of gases and vapours and determination of the limiting oxygen concentration (LOC) for flammable gases and vapours; German version prEN 1839:2014
AWPA A46-20 Standard Method for Determining MCS Concentration in EL2 Treatment Solution Samples by Turbidity Measurement
AWPA A46-14 Standard Method for Determining MCS Stabilizer Concentration in EL2 Treatment Solution Samples by Turbidity Measurement
BS EN 55016-4-2:2011+A1:2014 Specification for radio disturbance and immunity measuring apparatus and methods-Uncertainties, statistics and limit modelling. Measurement instrumentation uncertainty
BS ISO 5725-4:1994 Accuracy (trueness and precision) of measurement methods and results-Basic methods for the determination of the trueness of a standard measurement method
DIN 18122-2 E:2020 Draft Document - Soil, investigation and testing - Consistency limits - Part 2: Determination of shrinkage limit
DANSK DS/ISO/IEC GUIDE 98-1:2009 Uncertainty of measurement – Part 1: Introduction to the expression of uncertainty in measurement
CEI UNI 70098-3:2016 Measurement Uncertainty Part 3: Guide to expressing measurement uncertainty
DIN 53000-3:2023 Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 3: Calibration and determination of the uncertainty of measurement

British Standards Institution (BSI)

ISO/IEC GUIDE 98-3:2008/Suppl.2:2011 Uncertainty of measurement - Guide to the expression of uncertainty in measurement (GUM:1995). Extension to any number of output quantities
BS EN 55016-4-2:2011+A2:2018 Specification for radio disturbance and immunity measuring apparatus and methods. Uncertainties, statistics and limit modelling. Measurement instrumentation uncertainty
BS ISO 5725-4:2020 Accuracy (trueness and precision) of measurement methods and results - Basic methods for the determination of the trueness of a standard measurement method

German Institute for Standardization

DIN EN 1839:2017 Determination of the explosion limits and the limiting oxygen concentration (LOC) for flammable gases and vapours
DIN EN 1839:2017-04 Determination of the explosion limits and the limiting oxygen concentration (LOC) for flammable gases and vapours; German version EN 1839:2017 / Note: DIN EN 1839 (2012-12) and DIN EN 14756 (2007-02) remain valid alongside this standard until 2018-01-11.
DIN 18122-2:2020-11 Soil, investigation and testing - Consistency limits - Part 2: Determination of shrinkage limit
DIN 53000-3:2023-07 Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 3: Calibration and determination of the uncertainty of measurement

American Society for Testing and Materials (ASTM)

ASTM D868-10(2020) Standard Practice for Determination of Degree of Bleeding of Traffic Paint
ASTM D4460-97(2004) Standard Practice for Calculating Precision Limits Where Values are Calculated from Other Test Methods
ASTM D4460-97(2015) Standard Practice for Calculating Precision Limits Where Values are Calculated from Other Test Methods

Association Francaise de Normalisation

NF S66-250*NF EN 1839:2017 Determination of the explosion limits and the limiting oxygen concentration (LOC) for flammable gases and vapours
NF T12-005:1981 Cellulose. Determination of the maximum viscosity index of the cellulose in dilute solutions.
NF X43-101:1986 Air quality. Method of measurement of the odour of gaseous effluent. Determination of the dilution factor at the threshold of perception.
FD GUIDE ISO/IEC 98-1:2011 Measurement uncertainty - Part 1: introduction to the expression of measurement uncertainty

AENOR

UNE-EN ISO 10993-17:2009 Biological evaluation of medical devices - Part 17: Establishment of allowable limits for leachable substances (ISO 10993-17:2002)
UNE-EN 55016-4-2:2012 Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty
UNE-EN 55016-4-2:2012/A1:2014 Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty

ZA-SANS

SANS 5016:1975 Arsenic in pharmaceutical products, limit test
SANS 5014:1987 Heavy metals in pharmaceutical solutions, limit test

GSO

GSO ISO 5351:2015 Pulps -- Determination of limiting viscosity number in cupri-ethylenediamine (CED) solution
GSO ISO 12803:2013 Representative sampling of plutonium nitrate solutions for determination of plutonium concentration
GSO ISO/IEC Guide 98-1:2013 Uncertainty of measurement -- Part 1: Introduction to the expression of uncertainty in measurement
BH GSO ISO/IEC Guide 98-1:2016 Uncertainty of measurement -- Part 1: Introduction to the expression of uncertainty in measurement

American National Standards Institute （ANSI)

ANSI/ASTM D6259:2015 Standard Practice for Determination of a Pooled Limit of Quantitation for a Test Method
ANSI/ASME PTC19.1-2013 Test Uncertainty

Standard Association of Australia （SAA）

AS/NZS CISPR 16.4.1:2012 Specifications for Radio Interference and Immunity Measurement Equipment and Methods Uncertainties, Statistics and Limit Modeling Uncertainty in Standardized EMC Tests

ET-QSAE

ES 539-2000 Drugs—Isoniazid Tablets Dissolution Test
ES 540-2000 Dissolution test of chloroquine phosphate tablets
ES 538-2000 Drug—Dissolution Test of Dapsone Tablets
ES 537-2000 Drugs—Dissolution Testing of Tablets and Capsules

KR-KS

KS M ISO 5351-2020 Pulps — Determination of limiting viscosity number in cupri-ethylenediamine(CED) solution
KS Q ISO/IEC GUIDE 98-3-2017 Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement

RU-GOST R

GOST R 52689-2006 Foods. Anodic stripping voltammetric method of iodine mass concentration determination
GOST R 55928-2013 Regulations for establishing permissible limits harmful pollutants emissions from industrial enterprises
GOST 31660-2012 Foods. Anodic stripping voltammetric method of iodine mass concentration determination
GOST 17.2.3.02-2014 Regulations for establishing permissible limits of harmful pollutants emissions from industrial enterprises
GOST 34100.3.2-2017 Uncertainty of measurement. Part 3. Guide to the expression of uncertainty in measurement. Supplement 2. Extension to any number of output quantities
GOST R 54500.3-2011 Uncertainty of measurement. Part 3. Guide to the expression of uncertainty in measurement

International Electrotechnical Commission (IEC)

CISPR 16-4-2:2011+AMD1:2014+AMD2:2018 CSV Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty
CISPR 16-4-2:2011 Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty
CISPR 16-4-2-2011+AMD1-2014+AMD2-2018 CSV Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty

IX-CISPR

CISPR 16-4-2:2011/AMD1:2014/AMD2:2018 CSV Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty
CISPR 16-4-2:2011/AMD1:2014 CSV Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty

Danish Standards Foundation

DS/EN 55016-4-2:2012 Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty

American Society of Mechanical Engineers (ASME)

ASME PTC 19.1-2013 Test Uncertainty (PTC 19.1 - 2013)
ASME PTC 19.1-2018 Test Uncertainty
ASME PTC 19.1-1998 Measurement Uncertainty
ASME PTC 19.1-2005 Test Uncertainty

TR-TSE

TS 252-1965 METHOD OF DETERMINING THE VVIDTH AND THE LENGTH OF THE CLOTH

CU-NC

NC 21-03-1968 Exact concentration reagent solutions for general use

HU-MSZT

MSZ 9650/23-1978 Determination of fluidity temperature for paint detection

BR-ABNT

ABNT NBR ISO 5351:2012 Pulps - Determination of the number of viscosity limit in a solution of cupric ethylenediamine (CED)

Japanese Industrial Standards Committee (JISC)

JIS Z 8404-1:2006 Measurement uncertainty -- Part 1: Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation
JIS Z 8404-1:2018 Measurement uncertainty -- Part 1: Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation

YU-JUS

JUS ISO 1242:1992 Essential oils. Determination of the acid value

Others: