Effect of RF voltage on quadrupole

Effect of RF voltage on quadrupole, Total:113 items.

The international standard classification for "Effect of RF voltage on quadrupole" includes: .

The Chinese standard classification for "Effect of RF voltage on quadrupole" includes: Compressor and fan , Electric transmission line and equipment , .

Taiwan Provincial Standard of the People's Republic of China

CNS 8195-1985 Method of Test for Subplate Type Solenoid Operated 4 - Port Valves (Oil - Hydraulic Use )
CNS 6073-1983 High - Voltage Drop Wire for Pole Tramsformer
CNS 8194-1985 Subplate Type Solenoid Operated 4 - Port Valves for Oil - Hydraulic Use

Professional Standard - Energy

DL/T 2472-2021 Live working-insulating sticks and attachable devices

Group Standards of the People's Republic of China

T/CEEIA 489-2020 Class 1E cables for fourth generation nuclear power plant with high temperature gas-cooled reactor
T/ZZB 1132-2019 Live working - insulation screwdriver for use up to 1000V AC and 1500V DC
T/GXAF 0012-2023 Determination of Artemisinin in Artemisia annua by Liquid Chromatography-Triple Quadrupole Mass Spectrometry
T/NAIA 0160-2022 Determination of total sulfur dioxide in wine by triple quadrupole inductively coupled plasma mass spectrometry

Professional Standard - Machinery

JB/T 11421-2013 Single Screw Air Compressor for Electric Bus
JB/ZQ 4788-2006 UDZ single-action multistage hydraulic cylinder
JB/T 12642.6-2016 Progressive dies for motor cores. Components. Part 6: Stacking pressure rods

Professional Standard - Electricity

DL/T 636-1997 Bicycle Conductor Car of 500kV Quad Bundle for Live Working
DL/T 636-2006 Bicycle conductor car of 500k V quad bundle for live working

Hubei Provincial Standard of the People's Republic of China

DB42/T 1916-2022 Determination of Pyrethroid Pesticides in Aquatic Products by Gas Chromatography Triple Quadrupole Mass Spectrometry

Professional Standard - Environmental Protection

HJ 827-2017 Water quality - Determination of carbamates pesticides by Ultra performance liquid chromatography-triple quadrupole mass spectrometry

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 18269-2008 Live working-Hand tools for use up to 1kV a.c .and 1.5kV d.c.

Korean Agency for Technology and Standards (KATS)

KS B 6346-1975(2016) Subplate type solenoid operated 4-port valves for Oil-hydraulic use
KS B 6346-1986 Subplate type solenoid operated 4-port valves for Oil-hydraulic use
KS B 6346-2021 Subplate type solenoid operated 4-port valves for oil-hydraulic use
KS C IEC 61057:2003 Aerial devices with insulating boom used for live working
KS C IEC 61057:2015 Aerial devices with insulating boom used for live working
KS C IEC 61236:2004 Saddles, pole clamps(stick clamps) and accessories for live working
KS B ISO 6164-2013 Hydraulic fluid power－Four-screw, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa
KS B ISO 5597:2013 Hydraulic fluid power-Cylinders-Housing for piston and rod seals in reciprocating applications-Dimensions and tolerances
KS B ISO 5597:2002 Hydraulic fluid power-Cylinders-Housing for piston and rod seals in reciprocating applications-Dimensions and tolerances
KS C IEC 61236-2021 Saddles, pole clamps(stick clamps) and accessories for live working
KS C IEC 61236-2016(2021) Saddles, pole clamps(stick clamps) and accessories for live working
KS C 4503-2014 Hook bar for disconnecting switch operation
KS C IEC 61219:2005 Live working－Earthing or earthing and short-circuiting equipment using lances as a short-circuiting device－Lance earthing
KS C IEC 60895:2015 Live working — Conductive clothing for use at nominal voltage up to 800 kV AC and ±600 kV DC
KS C IEC 61020-4-2-2002(2012) Electromechanical switches for use in electrical equipment－Part 4：Sectional specification for lever (toggle) switches－Section 2：Detail specification for one pole, two pole, four pole, sealed lever(tog

Defense Logistics Agency

DLA SMD-5962-94692 REV C-2007 MICROCIRCUIT, LINEAR, RAIL-TO-RAIL, DUAL/QUAD OPERATIONAL AMPLIFIER, MONOLITHIC SILICON

HU-MSZT

MSZ 11847-1969 Quad-shaped aluminum exposed wires, pole positions, for use in the power industry
MNOSZ 17613-1954 Sorghum stalks for making brooms
MSZ KGST 330-1976 MSZ KGST 330-76 32 MPa nominal pressure primary hydraulic cylinder pump rod connecting screws
MSZ 12668-1984 Connecting screws for hydraulic and pneumatic working column piston connecting rod and piston

Association Francaise de Normalisation

NF C18-450:1994 Aerial devices with insulating boom used for live working exceeding 1 kv A.C.
NF EN 50080:1991 Caractéristiques RF des récepteurs MAC en MA/BLR pour télévision par câbles
NF C18-431:1996 Saddles, pole clamps (stick clamps) and accessories for live working.

API - American Petroleum Institute

API RP 7G-1973 Recommended Practice for Drill Stem Design and Operating Limits (Fourth Edition)
API RP 7G-1990 RECOMMENDED PRACTICE FOR DRILL STEM DESIGN AND OPERATING LIMITS (FOURTEENTH EDITION; SUPPLEMENT 1 - JANUARY 1992)

ES-AENOR

UNE 21-731-1991 Insulating rods and appliances for universal cushions for pressure work

RU-GOST R

GOST 29161-1991 Woodworking machines. Horisontal shredding machines for wood wool production, quadruple effect. Nomenclature
GOST 25553-1982 One stage hydraulic cylinders at nominal pressure 16 MPa. Connected threades of rods and plungers
GOST 5385-1974 Laminated round rods (fabric base) for electrical purposes. Specifications

SCC

BS PD ISO/TS 20175:2018 Vacuum technology. Vacuum gauges. Characterization of quadrupole mass spectrometers for partial pressure measurement
BS 6331-3:1983 Mounting dimensions of single rod double acting hydraulic cylinders-Specification for 250 bar series
CAN/ULC-61236-2009 SADDLES, POLE CLAMPS (STICK CLAMPS) AND ACCESSORIES FOR LIVE WORKING
BS EN 61236:1995 Saddles, pole clamps (stick clamps) and accessories for live working
CAN/ULC-D61236-1999 Saddles, Pole Clamps (Stick Clamps) and Accessories for Live Working
UNE-EN 61236:1998 SADDLES, POLE CLAMPS (STICK CLAMPS) AND ACCESSORIES FOR LIVE WORKING.
UNE 204003:2003 Insulated poles (insulating sticks) for electrical purposes on high-voltage installations.

IN-BIS

IS 7665-1975 Specifications for clamps, guts, crushing, leverage, payment modes
IS 9171-1979 Code of practice for maintenance and use of friction and hydraulic struts and connecting rods

SE-SIS

SIS SS 3106-1978 Gland packings for valve stems — Testing the corrosive effect on stainless steel stems with 12-14% Cr

British Standards Institution (BSI)

PD ISO/TS 20175:2018 Vacuum technology. Vacuum gauges. Characterization of quadrupole mass spectrometers for partial pressure measurement
BS PD ISO/PAS 19295:2016 Electrically propelled road vehicles. Specification of voltage sub-classes for voltage class B

BE-NBN

NBN 738 ADD 2-1984 The non-braced bottom of a cylindrical body under internal pressure
NBN 739-1970 The flat bottom of the cylindrical body that is not fixed by braces under external pressure
NBN 739 ADD 2-1984 The flat bottom of the cylindrical body that is not fixed by braces under external pressure
NBN 740 ADD 1-1984 Reinforcement of non-strut fixed bottom opening under internal pressure
NBN 740-1970 Reinforcement of non-strut fixed bottom opening under internal pressure
NBN 738-1970 The bottom of the cylindrical body that is not fixed by braces under the action of internal pressure

YU-JUS

JUS N.C6.133-1993 Coaxial cables for cable distribution systems and common antena systems RF 75-4-59 F/V ,RF 75-4-59 S/V,RF75-4-59 F/P,RF 75-4-59 S/P
JUS N.C6.135-1993 Coaxial cables for cable distribution systems and common antena systems RF 75-7-11 F/V ,RF 75-7-11 S/V,RF75-7-11 F/P,RF 75-7-11 S/P
JUS N.C6.131-1990 Coaxial cables for cable distribution systems and comnon antetma systems RF 75-11-41 and RF 75-11-41V
JUS N.C6.111-1990 Coax±al cables for cable ?istribution systams and common antenna systems RF 75-9-09 and RF 75-9-19
JUS N.C6.110-1990 Coaxial cables for cable dlstribution systetms and common antcnna sjstetts RF 75-7-91A and RF 75-7-9/AV
JUS N.C6.113-1990 Coaxial cables far cable distribution systems and cotmon antenna systems RF 75-7-31 and RF 75-7-31/V
JUS N.C6.114-1990 Coaxial cables for csble distribution systems and common anterma systems RF 75-7-32 and RF 75-7-3Z/V
JUS N.C6.132-1990 Coaxial cables for cable distribution systems and common antenna systems RF 75-16-42 and RF 75-16-42/V
JUS N.C6.112-1990 Coaxial cables for cable distribution systems and common antenna systems RF 75-7-30 and RF 75-7-30/V
JUS N.C6.115-1990 Cosacial cables for cable distribution systems and common anterma sjrstems RF 75-7-33 and RF 75-7-33/V

GSO

GSO ISO 493:2015 Aircraft -- Dimensions for single-hole mounting (Class 1 and Class 2) lever-operated manual switches
OS GSO ISO 493:2015 Aircraft -- Dimensions for single-hole mounting (Class 1 and Class 2) lever-operated manual switches
BH GSO ISO 493:2017 Aircraft -- Dimensions for single-hole mounting (Class 1 and Class 2) lever-operated manual switches

Society of Automotive Engineers (SAE)

SAE AMS3667C-1998 Polytetrafluoroethylene Sheet, Molded General Purpose Grade, As Sintered
SAE AMS3667B-2011 POLYTETRAFLUOROETHYLENE SHEET, MOLDED General Purpose Grade, As Sintered
SAE AMS3667A-1976 POLYTETRAFLUOROETHYLENE SHEET, MOLDED General Purpose Grade, As Sintered
SAE AMS3667-1966 POLYTETRAFLUOROETHYLENE SHEET, MOLDED General Purpose Grade, As Sintered

American Society for Testing and Materials (ASTM)

ASTM D1710-99 Standard Specification for Extruded and Compression Molded Polytetrafluoroethylene (PTFE) Rod and Heavy-Walled Tubing
ASTM D6457-08 Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE)
ASTM D6457-04 Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE)
ASTM F9-69 Specification for Round Wire for Use as Grid Siderods in Electron Tubes
ASTM D1710-02 Standard Specification for Extruded and Compression Molded Polytetrafluoroethylene (PTFE) Rod and Heavy-Walled Tubing
ASTM F1825-03 Standard Specification for Clampstick Type Live Line Tools
ASTM F1825-03(2013) Standard Specification for Clampstick Type Live Line Tools

AGMA - American Gear Manufacturers Association

6017-E86-1986 Rating and Application of Single and Multiple Reduction Double-Enveloping-Worm and Helical-Worm Speed Reducers

ZA-SANS

NRS 038-1-2007 Electricity distribution - Concrete poles Part 1: Concrete poles for LV and MV overhead distribution systems

International Electrotechnical Commission (IEC)

IEC 61219:1993/COR1:2000 Live working; earthing or earthing and short-circuiting equipment using lances as a short-circuiting device; lance earthing
IEC 61219:1993 Live working; earthing or earthing and short-circuiting equipment using lances as a short-circuiting device; lance earthing
IEC 61020-4-2:1995 Electromechanical switches for use in electronic equipment - Part 4: Sectional specification for lever (toggle) switches - Section 2: Detail specification for one pole, two pole, four pole, sealed lever (toggle) switches, 277 V a.c. maximum, 30 V d.c. max
IEC 60895:2002 Live working - Conductive clothing for use at nominal voltage up to 800 kV a.c. and ˝600 kV d.c.

German Institute for Standardization

DIN VDE 0681-2:1977 VDE Specification for operating testing, and safe-guarding devices used when carrying out live-line-work on equipment with rated voltages exceeding 1 kV; part 2: operating rods
DIN 57681-2:1977 VDE Specification for operating testing, and safe-guarding devices used when carrying out live-line-work on equipment with rated voltages exceeding 1 kV; part 2: operating rods
DIN EN 61057:1995 Aerial devices with insulating boom used for life working exceeding 1 kV a.c. (IEC 61057:1991, modified); German version EN 61057:1993
DIN 48174-1:1984 Crossarms for wooden poles for overhead power lines up to 1000 V
DIN ISO 5597:1988 Hydraulic fluid power; cylinders; housings for piston and rod seals in reciprocating applications; dimensions and tolerances; identical with ISO 5597:1987
DIN 43167-1:1987-12 Rod-type insulator for overhead contact lines for operating voltages up to 1000 V a.c. and 1500 V d.c.; assembly

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE 0681-2-1977 VDE Specification for operating testing@ and safe-guarding devices used when carrying out live-line-work on equipment with rated voltages exceeding 1 kV; part 2: operating rods

Danish Standards Foundation

DS/ISO 5597:1989 Hydraulic fluid power. Cylinders. Housings for piston and rod seals in reciprocating applications. Dimensions and tolerances
DS/EN 61057:1998 Aerial devices with insulating boom used for live working exceeding 1 kV a.c.

American National Standards Institute （ANSI)

ANSI/ASTM D349:2013 Test Methods for Laminated Round Rods Used for Electrical Insulation
ANSI T1.315-2001 Voltage Levels for DC-Powered Equipment Used in the Telecommunications Environment

Japanese Industrial Standards Committee (JISC)

JIS C 5260-2-2:2000 Potentiometers for use in electronic equipment -- Part 2: Blank detail specification: Lead-screw actuated and rotary preset potentiometers Assessment level F
JIS C 5260-2-1:2000 Potentiometers for use in electronic equipment -- Part 2: Blank detail specification: Lead-screw actuated and rotary preset potentiometers Assessment level E
JIS C 3609:2000 High-voltage drop wires for pole transformer
JIS B 9068:1994 Presser bars for industrial sewing machines

KR-KS

KS V 2038-2023 Roller bar type chain cable stoppers for grade 2 chain cable

AENOR

UNE-EN 61057:1996 AERIAL DEVICES WITH INSULATING BOOM USED FOR LIVE WORKING EXCEEDING 1 KV A.C.

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE 1654-2009 RF Protection of Personnel Working in the Vicinity of Wireless Communications Antennas Attached to Electric Power Line Structures

GOST

GOST R 51559-2022 Oil-immersed power transformers of 110 and 220 kV and autotransformers of 27,5 kV for a. c. railway power supply systems. General specifications

CZ-CSN

CSN ON 69 8955-1964 Steel work openings. Class 11 for pressure vessels

Others: