Plastic one-way valve

Plastic one-way valve, Total:162 items.

The international standard classification for "Plastic one-way valve" includes: Fluid power systems , Textile glass materials , Plastics pipes, fittings and valves , Control components , Reinforced plastics , Rubber and plastics products , Products in fibre-reinforced cement , Other valves .

The Chinese standard classification for "Plastic one-way valve" includes: Hydraulic and pneumatic device , Glass fibre , Plastic profile , Fibre reinforced composites , Valve .

Professional Standard - Machinery

JB/T 2001.34-1999 Water system.Check valve
JB/T 11520-2013 Check Valve for Refrigeration Equipment
JB/T 10364-2014 Hydraulic Fluid Power-check Valve
JB/T 10364-2002 Hydraulic fluid power - Check valve
JB/ZQ 4595-2006 One-way valve
JB/T 2001.35-1999 Water system.Check valve
JB/T 2001.32-1999 Water system.Core screw plug type core of check valve
JB/T 2001.33-1999 Water system - Flange type core of check valve（PN=20、31.5MPa）

Professional Standard - Aviation

HB 909-2000 Hydraulic one-way restrictor valve
HB 911-2000 Air-conditioning high-pressure one-way valve
HB 6456-1990 General technical conditions for aviation hydraulic check valves
HB 908-2000 Hydraulic check valve
HB 3231-1979 check valve
HB 8701-2023 General specification for check valve of civil aircraft fuel system

Group Standards of the People's Republic of China

T/QGCML 3261-2024 One-way relief valve
T/ZZB 0888-2018 Plastic woven valve sack
T/QGCML 4364-2024 Vacuum check valve for automobile braking system
T/CSTM 00888-2023 Continuous carbon fiber reinforced thermoplastic unidirectional prepregs

Professional Standard-Ships

CB/T 3823-2013 Hydraulic pilot controlled check valve for ship
CB/T 3823-1998 Hydraulic pilot controled check valve for ship

Professional Standard - Aerospace

QJ 1142A-2008 General specification for gas check valves
QJ 1142-1987 General technical specifications for gas check valves

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 27725-2011 Butterfly valves of thermoplastics materials
GB/T 43308-2023 Glass fibre reinforced thermoplastic unidirectional prepregs
GB/T 3856-2005 Test method for compression properties of unidirectional fiber reinforced plastics
GB/T 42609-2023 Coal feed flow three-way diverter valve
GB 4550-1984 Preparation of unidirectional orientated fiber reinforced plastic plates for test purposes
GB/T 4550-1984 Preparation of unidirectional orientated fiber reinforced plastic plates for test purposes
GB/T 4550-2005 Preparation of unidirection orientated fiber reinforced plastic plates for test purposes
GB/T 28494-2012 Globe valves of thermoplastics materials
GB/T 3856-1983 Test method for compression properties of unidirectional fiber reinforced plastics
GB/T 8100-2006 Hydraulic fluid power―Pressure-reducing valves sequence valves unloading valves throttle valves and check valves―Mounting surfaces
GB/T 3356-1999 Test method for flexural properties of unidirectional fiber reinforced plastics

未注明发布机构

DIN EN 16767 E:2014-08 Industrial valves - Steel and cast iron check valves
DIN EN ISO 527-5:1997 Plastics — Determination of tensile properties — Part 5: Test conditions for unidirectional fiber-reinforced plastic composites
DIN EN 16767 E:2018-12 Industrial valves - Steel and cast iron check valves

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 8100.3-2021 Mounting surfaces of hydraulic valves—Part 3: Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves
GB/T 37842-2019 Ball valves of thermoplastics materials
GB/T 38008-2019 Gate valves of thermoplastics materials

工业和信息化部/国家能源局

JB/T 12782-2016 Feed conveying machinery. Directional control valve

Professional Standard - Building Materials

JC/T 773-1982 Test method for interply shear strength of unidirectional fiber reinforced plastics
JC/T 773-1996 Test method for interply shear strength of unidirectional fiber reinforced plastics

工业和信息化部

JB/T 13620.7-2018 Hot-runner systems of injection mould for plastics-Components -Part 7:Valve pin guide bush

GSO

GSO EN 14341:2009 Industrial valves - Steel check valves
GSO EN 13709:2009 Industrial valves - Steel globe and globe stop and check valves
BH GSO ISO 16136:2016 Industrial valves - Butterfly valves of thermoplastics materials
BH GSO ISO 16135:2016 Industrial valves -- Ball valves of thermoplastics materials
OS GSO ISO 16139:2013 Industrial valves - Gate valves of thermoplastics materials
OS GSO ISO 527-5:2015 Plastics -- Determination of tensile properties -- Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
GSO ISO 527-5:2015 Plastics -- Determination of tensile properties -- Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
BH GSO ISO 527-5:2016 Plastics -- Determination of tensile properties -- Part 5: Test conditions for unidirectional fibre-reinforced plastic composites

British Standards Institution (BSI)

BS EN 12334:2001(2004) Industrial valves - Cast iron check valves
BS EN 12334:2001 Industrial valves - Cast iron check valves
BS EN 2562:1997 Carbon fibre reinforced plastics - Unidirectional laminates - Flexural test parallel to the fibre direction
BS EN 16767:2016 Industrial valves. Steel and cast iron check valves
BS EN ISO 16138:2006+A1:2019 Industrial valves. Diaphragm valves of thermoplastics materials
BS ISO 5781:2000 Hydraulic fluid power - Pressure reducing valves, sequence valves, unloading valves, throttle valves and check valves - Mounting surfaces
BS ISO 5781:2016 Hydraulic fluid power. Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves. Mounting surfaces
BS EN ISO 527-5:2021 Plastics. Determination of tensile properties. Test conditions for unidirectional fibre-reinforced plastic composites
BS EN ISO 527-5:1997 Plastics - Determination of tensile properties - Test conditions for unidirectional fibre-reinforced plastic composites
BS EN ISO 16139:2006+A1:2019 Industrial valves. Gate valves of thermoplastics materials
BS EN ISO 16136:2006+A1:2019 Industrial valves. Butterfly valves of thermoplastics materials
BS EN 2562:1997(1999) Carbonfibre reinforced plastics — Unidirectional laminates — Flexural test parallel to the fibre direction
BS EN ISO 16135:2006 Industrial valves - Ball valves of thermoplastic materials
BS EN ISO 16139:2006 Industrial valves - Gate valves of thermoplastic materials
BS EN ISO 16135:2006+A1:2019 Industrial valves. Ball valves of thermoplastics materials
BS EN ISO 16136:2006 Industrial valves - Butterfly valves of thermoplastic materials

RU-GOST R

GOST 27477-1987 Check valves. Basic parameters

American Petroleum Institute (API)

API Spec 7NRV-2006(2020) Specification for Drill String Non-return Valves

Japanese Industrial Standards Committee (JISC)

JIS B 2011:2003 Bronze, gate, globe, angle, and check valves
JIS F 7504:2001 Shipbuilding -- Spheroidal graphite iron (ductile iron) 16K screw-down check angle valves
JIS F 7499:2001 Shipbuilding -- Spheroidal graphite iron (ductile iron) 16K screw-down check globe valves
JIS K 7165:2008 Plastics -- Determination of tensile properties -- Part 5: Test conditions for unidirectional fibre-reinforced plastic composites

SE-SIS

SIS SMS 1217-1953 Direct valve (one-way valve) straight, metal seal
SIS SMS 1218-1953 The angle of the direct valve (one-way valve) is sealed with metal

Standard Association of Australia （SAA）

AS 4794:2001 Non-return valves - Swing check and tilting disc
AS 4118.1.6:1995 Fire sprinkler systems - Components - Stop valves and non-return valves

American National Standards Institute （ANSI)

ANSI/UL 312-2010 Check Valves for Fire-Protection Service

SCC

BS 2782-11 METHOD 1102A:1981 Methods of testing plastics. Thermoplastics pipes, fittings and valves-Longitudinal reversion of pipes: immersion bath method
BS 2782-11 METHOD 1102B:1981 Methods of testing plastics. Thermoplastics pipes, fittings and valves-Longitudinal reversion of pipes: oven method
AWWA C521-2018 Plastic Ball Valves
DANSK DS/EN ISO 16136:2006 Industrial valves - Butterfly valves of thermoplastics materials
DANSK DS/EN ISO 16139:2006 Industrial valves - Gate valves of thermoplastics materials
DANSK DS/EN ISO 16135:2006 Industrial valves - Ball valves of thermoplastics materials
DANSK DS/EN ISO 527-5:2009 Plastics – Determination of tensile properties – Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
DANSK DS/ISO 527-5:2021 Plastics – Determination of tensile properties – Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
DANSK DS/EN ISO 16138/A1:2006 Industrial valves - Diaphragm valves of thermoplastics materials

Danish Standards Foundation

DS/EN ISO 16136:2006 Industrial valves – Butterfly valves of thermoplastics materials
DS/EN ISO 16139:2006 Industrial valves – Gate valves of thermoplastics materials
DS/EN ISO 16137:2006 Industrial valves – Check valves of thermoplastics materials
DS/EN ISO 21787:2006 Industrial valves – Globe valves of thermoplastics materials
DS/EN ISO 16135:2006 Industrial valves – Ball valves of thermoplastics materials
DS/EN ISO 16138:2006 Industrial valves - Diaphragm valves of thermoplastics materials
DS/EN ISO 527-5:2009 Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites

German Institute for Standardization

DIN EN ISO 16135 Berichtigung 1:2008 Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006); German version EN ISO 16135:2006, Corrigenda to DIN EN ISO 16135:2006-06
DIN EN ISO 16138 Berichtigung 1:2008 Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006); German version EN ISO 16138:2006, Corrigenda to DIN EN ISO 16138:2006-06
DIN EN 2562:1997 Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates; flexural test parallel to the fibre direction; German version EN 2562:1997
DIN 65375:1989-11 Aerospace; fiber reinforced plastics; testing of unidirectional laminates; compression test transverse to fiber direction
DIN EN ISO 16135:2019-12 Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006 + Amd 1:2019); German version EN ISO 16135:2006 + A1:2019
DIN EN ISO 16139:2019-12 Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006 + Amd 1:2019); German version EN ISO 16139:2006 + A1:2019
DIN EN ISO 16139:2006 Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006); English version of DIN EN ISO 16139:2006-06
DIN EN ISO 16136:2006 Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006); English version of DIN EN ISO 16136:2006-06
DIN EN ISO 16138:2006 Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006); English version of DIN EN ISO 16138:2006-06
DIN EN ISO 16136:2019-12 Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006 + Amd 1:2019); German version EN ISO 16136:2006 + A1:2019
DIN EN ISO 527-5:2022-05 Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:2021); German version EN ISO 527-5:2021

European Committee for Standardization (CEN)

EN ISO 16137:2006 Industrial valves - Check valves of thermoplastics materials ISO 16137:2006
EN 2562:1997 Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates - Flexural test parallel to the fibre direction
EN 2561:1995 Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction
EN ISO 16137:2006/A1:2019 Industrial valves - Check valves of thermoplastics materials - Amendment 1 (ISO 16137:2006/Amd 1:2019)

American Water Works Association (AWWA)

ANSI/AWWA C521-2018 Plastic Ball Valves

BSI

AWWA C521-2023 Plastic Ball Valves

International Organization for Standardization (ISO)

ISO 8233:2024 Thermoplastics valves
ISO 527-5:1997 Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
ISO 16136:2006 Industrial valves - Butterfly valves of thermoplastics materials
ISO 16135:2006 Industrial valves - Ball valves of thermoplastics materials
ISO 16139:2006 Industrial valves - Gate valves of thermoplastics materials
ISO 527-5:2021 Plastics — Determination of tensile properties — Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
ISO 5781:2000 Hydraulic fluid power - Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves - Mounting surfaces
ISO 5781:2016 Hydraulic fluid power - Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves - Mounting surfaces

Association Francaise de Normalisation

NF T57-152:1996 Textile glass reinforced plastics. Rovings. Preparation of unidirectional plates by winding.
NF E29-345/A1*NF EN ISO 16139/A1:2019 Industrial valves - Gate valves of thermoplastics materials - Amendment 1
NF T54-082:1988 Plastics. Thermoplastic and thermosetting valves. Test of resistance to pressure.
NF E29-340/A1*NF EN ISO 16135/A1:2019 Industrial valves - Ball valves of thermoplastics materials - Amendment 1
NF E29-342/A1*NF EN ISO 16136/A1:2019 Industrial valves - Butterfly valves of thermoplastics materials - Amendment 1
NF E29-345*NF EN ISO 16139:2006 Industrial valves - Gate valves of thermoplastic materials
NF E29-340*NF EN ISO 16135:2006 Industrial valves - Ball valves of thermoplastic materials
NF E29-343/A1*NF EN ISO 21787/A1:2019 Industrial valves - Globe valves of thermoplastics materials - Amendment 1
NF EN ISO 527-5:2021 Plastics - Determination of tensile properties - Part 5: test conditions for unidirectional fiber reinforced plastic composites
NF E29-344/A1*NF EN ISO 16137/A1:2019 Industrial valves - Check valves of thermoplastics materials - Amendment 1
NF E29-341/A1*NF EN ISO 16138/A1:2019 Industrial valves - Diaphragm valves of thermoplastics materials - Amendment 1
NF E29-342*NF EN ISO 16136:2006 Industrial valves - Butterfly valves of thermoplastic materials
NF EN ISO 16136:2006 Robinetterie industrielle - Robinets à papillon en matériaux thermoplastiques
NF T51-034-5*NF EN ISO 527-5:2021 Plastics - Determination of tensile properties - Part 5 : test conditions for unidirectional fibre-reinforced plastic composites
NF T57-151:1978 Glass textile reinforced plastics. Preparation of sheets of thermosetting resins with unidirectional reinforcement for tensile test specimens.

Lithuanian Standards Office

LST EN ISO 16136:2006 Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006)
LST EN ISO 16138:2006 Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006)

AENOR

UNE-EN ISO 16136:2007 Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006)
UNE-EN ISO 16138:2007 Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006)

NL-NEN

NEN 7206-1982 Non-return valves for gas, air and oxygen

PL-PKN

PN M74150-01-1986 Industrial valves Cast iron globe cheok valves Requirements and tests

HU-MSZT

MSZ 18740-1982 Stems and valves, bonnets and other plastic valves
MNOSZ 11088-1953 Valve elastic plastic contains magnetic core

GOSTR

GOST 34289-2017 Pipeline valves. Gate valves of thermoplastics materials. General specifications
GOST 34288-2017 Pipeline valves. Butterfly valves of thermoplastics materials. General specifications
GOST 34290-2017 Pipeline valves. Diaphragm valves of thermoplastics materials. General specifications
GOST 34292-2017 Pipeline valves. Ball valves of thermoplastics materials. General specifications

Manufacturers Standardization Society of the Valve and Fitting Industry (MSS)

MSS SP-122-1997 Plastic Industrial Ball Valves
MSS SP-122-2005 Plastic Industrial Ball Valves

YU-JUS

JUS M.C7.361-1992 Valves-Hand-wheels of plastic

MSS - Manufacturers Standardization Society of the Valve and Fittings Industry.

SP-122-1997 Plastic Industrial Ball Valves
SP-122-2005 Plastic Industrial Ball Valves
SP-122-2012 Plastic Industrial Ball Valves

European Association of Aerospace Industries

AECMA PREN 2597-1990 Aerospace Series Carbon Thermosetting Resin Undirectional Laminates Tensile Test Perpendicular to the Fibre Direction Issue P 1

ZA-SANS

SANS 16135:2009 Industrial valves - Ball valves of thermoplastics materials
SANS 1006:2007 Plastic floats for ball valves

Korean Agency for Technology and Standards (KATS)

KS M 3529-2008 Polyethylene(PE) valves for water distribution systems
KS M ISO 527-5-2012(2017) Plastics－Determination of tensile properties－Part 5：Test conditions for unidirectional fibre-reinforced plastic composites
KS M ISO 527-5-2023 Plastics — Determination of tensile properties — Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
KS M ISO 527-5:2012 Plastics－Determination of tensile properties－Part 5：Test conditions for unidirectional fibre-reinforced plastic composites
KS M ISO 527-5-2012(2022) Plastics－Determination of tensile properties－Part 5：Test conditions for unidirectional fibre-reinforced plastic composites

AT-ON

ONORM C 9712-1979 Unidirectional textile glass reinforced plastics; Determination of tensile properties

ES-UNE

UNE-EN ISO 527-5:2022 Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:2021)

Others: check valve,How about a check valve,Check Valve Performance,High Pressure Check Valve,pressure check valve,Check valve installation,check valve size,Various check valves,Check valve principle,check valve check valve,Check valve principle,Right Angle Check Valve,Flange check valve,small check valve,gas check valve,Check Valve Specifications,one-way valve,valve check valve,gas check valve