The greater the flexural modulus

The greater the flexural modulus, Total:204 items.

The international standard classification for "The greater the flexural modulus" includes: Moulding equipment , Cellular materials , Ceramic products .

The Chinese standard classification for "The greater the flexural modulus" includes: Moulds , Combination grippers , Synthetic resin and plastic , Special ceramics , Technical management , Basic standards and general methods for synthetic resin and plastic .

Professional Standard - Aerospace

QJ 2528.7-1993 F-Type Rectangular Short Support for Large Combination Bending Die Components
QJ 2315.4-1992 Female Die for Universal Trough Curve Mold (L≤2000mm)
QJ 2315-1992 Universal Trough Curve Mold (L≤1200mm)
QJ 2530.2-1993 Large combined bending die element connecting plate
QJ 2532.4-1993 Small combined bending die element length 1020mm bending upper die base
QJ 2527.4-1993 D-shaped lower groove base part of large combined bending die element
QJ 2528.10-1993 B-type rectangular long support of large combined bending die element
QJ 2527.3-1993 C-shaped lower groove base part of large combined bending die element
QJ 2531.2-1993 B-type upper mold of large combined bending mold element
QJ 2527.5-1993 E-type lower groove base part of large combined bending die element
QJ 773.30-1983 Small-sized Combination Die � Bent-shaped Bent Male Die
QJ 2529.2-1993 Adjustable leveling key for large combined bending die elements
QJ 2528.2-1993 B-type rectangular short support for large combined bending die element
QJ 2529.7-1993 B-type angle iron of large combined bending die element
QJ 2531.4-1993 A-shaped top plate of large combined bending mold element
QJ 2527.9-1993 D-type upper groove base part of large combined bending die element
QJ 2528.18-1993 Large combined bending die element thick backing plate
QJ 773.32-1983 Small-sized Combination Die - Bent Female Die
QJ 2313-1992 Universal trough bending die (L≤660mm)
QJ 2314.2-1992 Universal trough bending die (L≤1200mm) punch
QJ 2314.4-1992 Universal trough bending die (L≤1200mm) die
QJ 2528.1-1993 A-type rectangular short support for large combined bending die element
QJ 2314.3-1992 Universal trough bending die (L≤1200mm) upper die base
QJ 773.38-1983 Small-sized Combination Die - Regulable Bent Female Die
QJ 2529.1-1993 Flat key of large combined bending die element
QJ 2533.11-1993 Small Combined Bending Die Component C Type Bending Punch
QJ 2528.5-1993 D-type rectangular short support for large combined bending die element
QJ 2530.1-1993 Large Combination Bending Die Element Screws
QJ 2528.16-1993 Rectangular Support of Large Combination Bending Die Components
QJ 773.33-1983 Small-sized Combination Die - Split Bent Male Die
QJ 2532.5-1993 680mm long bending upper die base for small combined bending die elements
QJ 2313.1-1992 Universal trough bending die (L≤600mm) lower die base
QJ 2528.9-1993 A-type rectangular long support of large combined bending die element
QJ 2533.3-1993 Die inserts for small combined bending die elements
QJ 2314-1992 Universal trough bending die (L≤1200mm)
QJ 2312-1992 Universal trough bending die (L≤220mm)
QJ 2529.8-1993 A-type positioning plate for large combined bending die components
QJ 2315.2-1992 Universal trough bending die (L≤1200mm) punch
QJ 2531.5-1993 B-type top plate of large combined bending die element
QJ 2527.10-1993 Large-scale combined bending die element E-shaped upper groove basic part
QJ 2312.4-1992 Female Die for Universal Trough Curve Mold (L≤220mm)
QJ 2533.8-1993 Combination of small combined bending die components punching board
QJ 2528.3-1993 Square short support for large combined bending die element
QJ 2529.4-1993 Large-scale combined bending die element double-hole inclined pad
QJ 2312.2-1992 Male Mold of Universal Trough Curve Mold (L≤220mm)
QJ 2529.3-1993 Inclined Pad Blocks for Large Combination Bending Die Elements
QJ 773.40-1983 Small Combination Die Bending Platen
QJ 773.39-1983 Small-sized Combination Die - Regulable Bent Male Die
QJ 773.34-1983 Small-sized Combination Die - Split Bent Female Die
QJ 773.52-1983 Small-sized Combination Die - Bending Mandrel
QJ 773.31-1983 Small-sized Combination Die - Straight-shaped Bent Male Die
QJ 2529.5-1993 Large combined bending die element pressing block
QJ 2313.2-1992 Universal trough bending die (L≤600mm) punch
QJ 773.35-1983 Small-sized Combination Die - Small R Bent Male Die
QJ 2314.1-1992 Universal trough bending die (L≤1200mm) lower die base
QJ 2527.6-1993 Type A Upper Groove Basic Parts of Large Combination Bending Die Elements
QJ 2528.17-1993 Long support backing plate for large combined bending die element
QJ 2528.14-1993 F-Type Rectangular Long Support of Large Combination Bending Die Components
QJ 2313.3-1992 Universal trough bending die (L≤600mm) upper die base
QJ 777.16-1983 Small-sized Combination Die - Bending Gasket
QJ 773.37-1983 Small-sized Combination Die - R Bent Female Die
QJ 2528.20-1993 Thin backing plate for large combined bending die components
QJ 2528.8-1993 Short support backing plate for large combined bending die components
QJ 2312.1-1992 Lower Holder of Universal Trough Curve Mold (L≤220mm)
QJ 2531.3-1993 Lower die for large combined bending die components
QJ 2528.12-1993 D-type rectangular long support of large combined bending die element
QJ 2533.5-1993 Small Combined Bending Die Component A Type Punch
QJ 2527.2-1993 B-type lower groove base part of large combined bending die element
QJ 2533.6-1993 Small Combined Bending Die Components Type B Punch
QJ 2528.15-1993 G-Type Rectangular Long Support of Large Combination Bending Die Components
QJ 2528.4-1993 C-type rectangular short support for large combined bending die element
QJ 2315.1-1992 Universal trough bending die (L≤2000mm) lower die base
QJ 2532.10-1993 Die shank for small combined bending die components
QJ 2528.11-1993 C-type rectangular long support of large combined bending die element
QJ 2531.1-1993 Type A Upper Die of Large Combination Bending Die Components
QJ 2533.9-1993 Small Combined Bending Die Component A Type Bending Punch
QJ 2527.1-1993 Type A Lower Groove Basic Parts of Large Combination Bending Die Elements
QJ 2315.3-1992 Universal trough bending die (L≤2000mm) upper die base
QJ 750-1982 Typical combination of bending die without guide post
QJ 2528.13-1993 E-type rectangular long support for large combined bending die element
QJ 2496-1993 Technical conditions for large combined bending die components
QJ 2527.8-1993 C-type upper groove base part of large combined bending die element
QJ 773.36-1983 Small-sized Combination Die - R Bent Male Die
QJ 2313.4-1992 Universal trough bending die (L≤600mm) die
QJ 2527.7-1993 B-type upper groove base part of large combined bending die element
QJ 2528.19-1993 Medium-thick backing plate for large combined bending die components
QJ 2528.6-1993 E-type Rectangular Short Support for Large Combined Bending Die Components
QJ 2533.4-1993 Small Combination Bending Die Components Bending Die
QJ 2529.6-1993 Large combined bending die element A-type angle iron
QJ 2532.6-1993 Small combined bending die element length 340mm bending upper die base
QJ 2312.3-1992 Mold Shaft for Universal Trough Curve Mold (L≤220mm)
QJ 2529.9-1993 B-type positioning plate for large combined bending die components
QJ 2530.3-1993 Ejector rod of large combined bending die element
QJ 2533.10-1993 Small Combined Bending Die Components Type B Bending Punch

Professional Standard - Aviation

HB 4343-1989 Curved Female Frame
HB 1978-1975 Typical Combination of Bending Die for Rear Guide Pillar
HB 4369-1989 Curved Die Block
HB 1980-1975 Typical combination of bending die without guide post
HB 1981-1975 Typical combination of bending die without guide post

Professional Standard - Agriculture

第2．9．3章OIE陆生动物诊断试验和疫苗手册-第七版 Other diseases - Campylobacter jejuni and Campylobacter coli

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 10700-2006 Test methods for elastic moduli of fine ceramics (advanced ceramics, advanced technical ceramics) - Bending method
GB/T 8812.2-2007 Rigid cellular plastics—Determination of flexural properties—Part 2:Determination of flexural strength and apparent flexural modulus of elasticity

Professional Standard - Electron

SJ 3009.5-1988 Combined dies - Upper bending point
SJ 3008.3-1988 Combined dies - 90°bending point
SJ 2995.1-1988 Combined dies - Holder of bending cutting edge
SJ 3008.1-1988 Combined dies-90°bending point
SJ 3008.5-1988 Combined dies-90°bending point
SJ 2995.2-1988 Combined dies-Holder of bending cutting edge
SJ 3039.3-1988 Combined dies - 90°bending point
SJ 3008.2-1988 Combined dies-Special 90°bending point
SJ 3008.4-1988 Combined dies-90°bending point
SJ 3009.1-1988 Combined dies - R bend point
SJ 3009.2-1988 Combined dies - R bend point
SJ 3039.2-1988 Combined dies-Holder of bend point
SJ 3009.6-1988 Combined dies - Bending point
SJ 3008.6-1988 Combined dies-90°bending point
SJ 3009.3-1988 Combined dies - Π-form bend point

Professional Standard - Machinery

JB/T 6544-1993 Drawing and Bending Elastic Modulus of Plastics - Test Method

RO-ASRO

STAS SR EN 310-1996 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength

GSO

GSO ISO 16978:2009 Wood-based panels- Determination of modulus of elasticity in bending and of bending strength
BH GSO EN 310:2022 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
OS GSO ISO 16978:2009 Wood-based panels- Determination of modulus of elasticity in bending and of bending strength
GSO EN 310:2021 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
GSO ISO 1209-2:2015 Rigid cellular plastics -- Determination of flexural properties -- Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
OS GSO ISO 1209-2:2015 Rigid cellular plastics -- Determination of flexural properties -- Part 2: Determination of flexural strength and apparent flexural modulus of elasticity

SCC

DANSK DS/EN 310:1993 Wood-based panels - Determination of modulus of elasticity in bending and bending strength
NS-EN 310:1993 Wood-based panels — Determination of modulus of elasticity in bending and of bending strength
AENOR UNE-EN 310:1994 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
NS 3277:1987 Particle boards — Test methods — Modulus of elasticity in bending and bending strength
NS 3252:1975 Test methods for rigid flat sheets — Modulus of elasticity in bending and bending strength

British Standards Institution (BSI)

BS EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
BS EN 310:1993(1999) Wood - based panels — Determination of modulus of elasticity in bending and of bending strength
BS ISO 11093-7:2011 Paper and board. Testing of cores. Determination of flexural modulus by the three-point method

Lithuanian Standards Office

LST EN 310-1999 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength

Indonesia Standards

SNI ISO 16978:2010 Wood-based panels - Determination of modulus elasticity in bending and of bending strength

Danish Standards Foundation

DS/EN 310:1994 Wood-based panels - Determination of modulus of elasticity in bending and bending strength
DS/EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength

German Institute for Standardization

DIN EN 310:1993 Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993
DIN EN 310:1993-08 Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993

European Committee for Standardization (CEN)

EN 310:1993 Wood-based panels; determination of modulus of elasticity in bending and of bending strength
prEN 310-1992 Wood-based panels; determination of modulus elasticity, in bending and bending strength

Association Francaise de Normalisation

NF EN 310:1993 Wood-based panels - Determination of flexural modulus of elasticity and flexural strength
NF B51-124*NF EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength.
NF EN 14771:2012 Bitumens and bituminous binders - Determination of the bending stiffness modulus - Bar bending rheometer (BBR)
NF B57-041:1974 Expanded pure agglomerated cork. Determination of the modulus of rupture by bending.

Spanish Association for Standardization (UNE)

UNE-EN 310:1994 WOOD-BASED PANELS. DETERMINATION OF MODULUS OF ELASTICITY IN BENDING AND OF BENDING STRENGTH.
UNE-ISO 1209-2:2011 Rigid cellular plastics. Determination of flexural properties. Part 2: Determination on flexural strength and apparent flexural modulus of elasticity
UNE 56 711 Determination of elastic modulus and bending resistance of particle board
UNE 43713:1980 FLEXURE TESTING OF FLAT GLASS. DETERMINATION OF MODULUS OF RUPTURE

GM North America

GM GMP.PA66.085-2002 Flexible Nylon 66 600 Flexural Modulus
GMP.EEBC+PBT.006-2002 Copolyester Elastomer - 300 MPa Flexural Modulus Revision B
GM GMP.E/P.074-1996 Polyolefin Alloy - 800 MPa Flexural Modulus
GM GMP.E/P.049-1992 Polyolefin Alloy - 375 MPa Flexural Modulus
GM GMP.E/P.039-2003 Polyolefin Alloy 700 MPa Flexural Modulus
GM GMP.EEBC+ PBT.002-1993 Copolyester Elastomer - 700 MPa Flexural Modulus
GMP.E/P.039-2003 Polyolefin Alloy - 700 MPa Flexural Modulus Revision B
GM GMP.E/P.047-1993 Polyolefin Alloy - Weather Resistant, 8% Maximum Glass/Mineral Filled, 575 MPa Flexural Modulus
GM GMP.E/P.064R-1994 Polyolefin Alloy - Recycled, 550 MPa Flexural Modulus
GMP.PUR.041-1999 Polyurethane RRIM - High Heat, 20% MICA, 1320 MPa Flexural Modulus
GMP.PUR.018-1995 Polyurethane RRIM - 20% Glass Fiber, 700 MPa Flexural Modulus Revision A
GM GMP.E/P.069-1994 Polyolefin Alloy - Weather Resistant, 925 MPa Flexural Modulus
GM GMP.PU.019-1991 Polyurea RRIM - 15% Flake Glass, 875 MPa Flexural Modulus
GM GMP.E/P.099-2003 Polyolefin Alloy 900 MPa Flexural Modulus, High Flow
GM GMP.E/P.089-2004 Polyolefin Alloy 20% Mineral Filled, 1950 MPa Flexural Modulus
GM GMP.E/P.048-1993 Polyolefin Alloy - 925 MPa Flexural Modulus, Injection Molding Grade, Black
GM GMP.E/P.125-2002 Polyolefin Alloy High Impact, 550 MPa Flexural Modulus

AT-ON

ONORM EN 310-1993 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength

South African Bureau of Standard

SANS 6112:1988 Bending modulus of steel shanks for footwear

CZ-CSN

CSN 49 0116-1976 Sawn timbor Testing ní' iikkIuIus of elasticity in bending
CSN 49 0116-1980 Wood. Determination of the modulus of elasticity in static bending
CSN 49 0131-1982 Sawn timber. Determination of modulus of elasticity in static bending

BE-NBN

NBN-EN 310-1994 Wooden fiberboard. Determination of bending elastic modulus and bending resistance

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 4266.5:2004/AMD 1:2006 Reconstituted wood-based panels - Methods of test Method 5: Modulus of elasticity in bending and bending strength
AS/NZS 4266.5:2004(R2006) Reconstituted wood-based panels - Methods of test Method 5: Modulus of elasticity in bending and bending strength
AS/NZS 4266.5(Int):2001 Reconstituted wood-based panels - Methods of test - Modulus of elasticity in bending and bending strength

International Organization for Standardization (ISO)

ISO 1209-2:2004 Rigid cellular plastics - Determination of flexural properties - Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
ISO/TR 4137:1978 Plastics; Determination of modulus of elasticity by alternating flexure
ISO 1209-2:2007 Rigid cellular plastics - Determination of flexural properties - Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
ISO 2077:1979 Pure expanded corkboard; determination of the modulus of rupture by bending
ISO 2077:1979/Amd 1:1980 Pure expanded corkboard; determination of the modulus of rupture by bending

Korean Agency for Technology and Standards (KATS)

KS M ISO 1209-2-2022 Rigid cellular plastics－Determination of flexural properties－Part 2：Determination of flexural strength and apparent flexural modulus of elasticity
KS M ISO 1209-2-2012(2022) Rigid cellular plastics－Determination of flexural properties－Part 2：Determination of flexural strength and apparent flexural modulus of elasticity
KS M ISO 2077:2008 Pure expanded corkboard－Determination of the modulus of rupture by bending
KS M ISO 2077-2008 Pure expanded corkboard－Determination of the modulus of rupture by bending
KS M ISO 2077:2004 Pure expanded corkboard－Determination of the modulus of rupture by bending
KS M ISO 1209-2-2012(2017) Rigid cellular plastics－Determination of flexural properties－Part 2：Determination of flexural strength and apparent flexural modulus of elasticity

HU-MSZT

MNOSZ 10456-1952 Surgical equipment. large bone hip flexion

GB-REG

REG NACA-TN-1462-1948 BENDING OF RECTANGULAR PLATES WITH LARGE DEFLECTIONS
REG NACA-TR-737-1942 Bending of Rectangular Plates with Large Deflections

Standard Association of Australia （SAA）

AS A106:1957 Australian standard method for the determination of the flexural strength of flexure test specimens

American Society for Testing and Materials (ASTM)

ASTM C120-06 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
ASTM C120/C120M-09 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
ASTM C120-06e1 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
ASTM C1352/C1352M-21 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1352-96 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1352/C1352M-09 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1352/C1352M-15 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1352-96(2008) Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1352-96(2002) Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone

YU-JUS

JUS D.C8.108-1983 Testing ofparticle boards. Determination modu/us ofelasticity in bending
JUS D.Z8.046-1990 Cork. Pure expanded corkboard. Determination of the modulus of rupture by bending

KR-KS

KS M ISO 2077-2004 Pure expanded corkboard－Determination of the modulus of rupture by bending

ISUZU - Isuzu Motors Ltd.

ISC-C92-010-2008 Polypropylene Material Type K for Interior@ 1200MPa Flexural Modulus

Japanese Industrial Standards Committee (JISC)

JIS K 7221-2:2006 Rigid cellular plastics -- Determination of flexural properties -- Part 2: Determination of flexural strength and apparent flexural modulus of elasticity