greater bending strength

greater bending strength, Total:195 items.

The international standard classification for "greater bending strength" includes: Advanced ceramics , Raw materials and raw glass , Gears , Rubber , Ceramic products , Cellular materials , Ceramics .

The Chinese standard classification for "greater bending strength" includes: Special ceramics , Ceramic and glass in general , Gear and gear drive , Building sanitary ceramics , Basic standard and general method for synthetic rubber , Daily use ceramics products , Synthetic resin and plastic , Rubber products in general .

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 14230-2021 Test method of tooth bending strength for gear load capacity
GB/T 39826-2021 Fine ceramics—Determining flexural bond strength—Four-point bending method
GB/T 37781-2019 Test methods for bending strength of glass

Taiwan Provincial Standard of the People's Republic of China

CNS 13382.19-1995 Implants for Surgery-Determination of Bending Strength and Stiffness of Bone Plates
CNS 12703-1990 Method of Test for Flexural Strength (Modulus of Rupture) of High Performance Ceramics at Elevated Temperature
CNS 14387-1999 Method of test for bending strength of fine ceramic joint
CNS 13382-19-1995 Implants for Surgery-Determination of Bending Strength and Stiffness of Bone Plates
CNS 13976-1997 Method of test for flexural strength of dimensional stone

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 1965-1996 Test method for cross-bending strength of porous ceramics
GB 6569-1986 Testing method for flexural strength of high performance ceramics
GB/T 6569-1986 Testing method for flexural strength of high performance ceramics
GB/T 14230-1993 of test method for bending load capacity of gears
GB/T 1965-2023 Porous ceramics—Test method for flexural strength at room temperature
GB/T 6569-2006 Fine ceramics (advanced ceramics,advanced technical ceramics) - Test method for for flexural strength of monolithic ceramics at room temperature
GB/T 8812.2-2007 Rigid cellular plastics—Determination of flexural properties—Part 2:Determination of flexural strength and apparent flexural modulus of elasticity
GB/T 2833-1996 Test method for cross-bending strength of vitrified pipe
GB/T 1696-2001 Ebonite-Determination of cross breakiing strength
GB/T 14390-1993 Test method for flexural strength of high performance ceramics at elevated temperature
GB/T 4741-1999 STANDARD test method for bending strength of ceramic materials
GB/T 14390-2008 Fine ceramics (advanced ceramics advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at elevated temperature

Professional Standard - Chemical Industry

HG/T 3844-2008 Ebonite-Determination of cross breaking strength

Group Standards of the People's Republic of China

T/CSEB 0002-2018 Testing method for determining dynamic bending strength of rock materials by the Semi-circular Bending specimen
T/CSTM 00587-2023 Test method for flexural strength of crystalline silicon cells—Four-point flexural

Professional Standard - Building Materials

JC/T 676-1997 Test method for flexure of glass material

Professional Standard - Agriculture

第2．9．3章OIE陆生动物诊断试验和疫苗手册-第七版 Other diseases - Campylobacter jejuni and Campylobacter coli

Professional Standard - Automobile

QC/T 637-2000 Test method for endurance bending strength of automotive engines crank shaft

Professional Standard - Aerospace

QJ 2199-1991 Test method for flexural strength of rigid foamed plastics

Professional Standard - Aviation

HB/Z 89.3-1985 Calculation of Bending Fatigue Strength of Aviation Bevel Gear Tooth

CZ-CSN

CSN ON 49 0193-1967 Bending strenght
CSN 49 0117-1979 Wood. Impact strength in flexure
CSN 49 0115-1976 Wood. Determination of ultimate strength in flexure tests
CSN 49 0115-1979 Wood. Determination of ultimate strength in flexure tests
CSN 49 0147-1989 Tests of wood based panels. Method of apparent modulus of elasticity in bending and of bending strength determination
CSN 73 1353-1976 Determiiiation of tensilo and flexui al strengths of cellular concreto

Standard Association of Australia （SAA）

AS A106:1957 Australian standard method for the determination of the flexural strength of flexure test specimens
AS A106:1971 Method for the determination of the flexural strength of concrete flexure test specimens

(U.S.) Ford Automotive Standards

FORD FLTM BS 005-1-2000 FLEXURAL STRENGTH OF PAPER BOARD

AASHTO - American Association of State Highway and Transportation Officials

DIVISION I 9.17-1996 Flexural Strength (Interim 1997; Interim 1998)

Indonesia Standards

SNI 12-0565-1989 Bending strength test of shoes
SNI ISO 16978:2010 Wood-based panels - Determination of modulus elasticity in bending and of bending strength
SNI ISO 3133:2010 Wood - Determination of ultimate strength in static bending
SNI 06-4966-1999 Determination of tensile and flexural/compression properties of vulcanized and thermoplastic rubber

GB-REG

REG NACA-TN-1462-1948 BENDING OF RECTANGULAR PLATES WITH LARGE DEFLECTIONS
REG NACA-TR-737-1942 Bending of Rectangular Plates with Large Deflections

SCC

DANSK DS/EN 310:1993 Wood-based panels - Determination of modulus of elasticity in bending and bending strength
NS-EN 310:1993 Wood-based panels — Determination of modulus of elasticity in bending and of bending strength
AENOR UNE-EN 310:1994 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
NS 3277:1987 Particle boards — Test methods — Modulus of elasticity in bending and bending strength
ASD-STAN prEN 6061:1970 Fibre reinforced plastics - Test method - Determination of sandwich flexural strength 4 point bending
NS 3252:1975 Test methods for rigid flat sheets — Modulus of elasticity in bending and bending strength
DIN EN 14617-2 E:2015 Draft Document - Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending); German and English version FprEN 14617-2:2015
JIS B 1759:2019 Estimation of tooth bending strength of cylindrical plastic gears
NS-EN 14617-2:2004 Agglomerated stone — Test methods — Part 2: Determination of flexural strength (bending)
DIN EN 6061 E:1996 Draft Document - Aerospace series - Fibre reinforced plastics - Test method; determination of sandwich flexural strength, 4 point bending
DANSK DS/ISO 9585:2014 Implants for surgery - Determination of bending strength and stiffness of bone plates
DANSK DS/EN 14617-2:2016 Agglomerated stone – Test methods – Part 2: Determination of flexural strength (bending)
NS-EN 14617-2:2008 Agglomerated stone — Test methods — Part 2: Determination of flexural strength (bending)
NS-EN 14617-2:2016 Agglomerated stone — Test methods — Part 2: Determination of flexural strength (bending)

Danish Standards Foundation

DS/EN 310:1994 Wood-based panels - Determination of modulus of elasticity in bending and bending strength
DS/EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
DS/EN 14617-2:2009 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
DS 1103.2:1976 Test methods for rigid flat sheets. Modulus of elasticity in bending and bending strength

German Institute for Standardization

DIN EN 310:1993 Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993
DIN EN 310:1993-08 Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993
DIN 52189-1:1981-12 Testing of wood; Impact bending test; Determination of impact bending strength
DIN EN 14617-2:2016 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
DIN 52189-1:1981 Testing of wood; Impact bending test; Determination of impact bending strength
DIN EN 1351:1997 Determination of flexural strength of autoclaved aerated concrete; German version EN 1351:1997
DIN EN ISO 22288:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method (ISO 22288:2006); English version of DIN EN ISO 22288:2009-04
DIN EN 14617-2:2016-09 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending); German version EN 14617-2:2016
DIN 53864:1978 Testing of textiles; determination of the bending strength, method according to Schlenker

RU-GOST R

GOST 19921-1974 Glued and bent blanks. Method of determining ultimate strength in static bending
GOST 21153.6-1975 Rocks. Method for the determination of bend strength limit
GOST 255-1990 Ebonite. Determination of cross-breaking strength
GOST 16483.3-1984 Wood. Method of static bending strength determination
GOST ISO 13765-4-2017 Refractory mortars. Determination of flexural bonding strength
GOST 26406-1984 Porcelain and faience ware. Method for determination of bending resistance
GOST 30271-1996 Paper and board. Determination of bending stiffness. Resonance method
GOST ISO 9585-2011 Implants for surgery. Determination of bending strength and stiffness of bone plates

GSO

GSO EN 310:2021 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
BH GSO EN 310:2022 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
OS GSO ISO 16978:2009 Wood-based panels- Determination of modulus of elasticity in bending and of bending strength
GSO ISO 16978:2009 Wood-based panels- Determination of modulus of elasticity in bending and of bending strength
OS GSO ISO 3348:2007 Wood - determination of impact bending strength
GSO ISO 3348:2007 Wood - determination of impact bending strength
GSO ISO 1209-2:2015 Rigid cellular plastics -- Determination of flexural properties -- Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
OS GSO ISO 1209-2:2015 Rigid cellular plastics -- Determination of flexural properties -- Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
GSO ISO 9585:2016 Implants for surgery -- Determination of bending strength and stiffness of bone plates
OS GSO ISO 9585:2016 Implants for surgery -- Determination of bending strength and stiffness of bone plates

British Standards Institution (BSI)

BS EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
BS EN 310:1993(1999) Wood - based panels — Determination of modulus of elasticity in bending and of bending strength
BS EN 14617-2:2016 Agglomerated stone. Test methods. Determination of flexural strength (bending)
BS ISO 13765-4:2004 Refractory mortars - Determination of flexural bonding strength
BS EN 1533:2010 Wood flooring. Determination of bending strength under static load. Test methods
BS EN 12390-5:2000 Testing hardened concrete - Flexural strength of test specimens
BS 3356:1990(1999) Method for Determination of bending length and flexural rigidity of fabrics
BS EN 12390-5:2019 Testing hardened concrete. Flexural strength of test specimens
BS EN 2746:1998 Glass fibre reinforced plastics - Flexural test - Three point bend method
BS EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Test with specimen supported at two points (four point bending)

Lithuanian Standards Office

LST EN 310-1999 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
LST EN 14617-2-2008 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)

European Committee for Standardization (CEN)

EN 310:1993 Wood-based panels; determination of modulus of elasticity in bending and of bending strength
prEN 310-1992 Wood-based panels; determination of modulus elasticity, in bending and bending strength
EN 13335:2002 Leather - Physical and Mechanical Tests - Determination of Flex Resistance by the Vamp Flex Method
EN 1533:2010 Wood flooring - Determination of bending strength under static load - Test methods
EN 1351:1997 Determination of flexural strength of autoclaved aerated concrete

Association Francaise de Normalisation

NF EN 310:1993 Wood-based panels - Determination of flexural modulus of elasticity and flexural strength
NF EN ISO 5402-2:2018 Leather - Determination of bending strength - Part 2: upper bending method
NF B51-124*NF EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength.
NF EN ISO 3327:2009 Hard metals - Determination of bending strength
NF B10-602-2*NF EN 14617-2:2016 Agglomerated stone - Test methods - Part 2 : determination of flexural strength (bending)
NF EN ISO 17707:2005 Footwear - Test methods for outsoles - Flexural strength
NF B51-008:2017 Wood - Static bending - Determination of ultimate strength in static bending using small clear specimens
NF EN ISO 5402-1:2022 Leather - Determination of bending strength - Part 1: flexometer method
NF EN ISO 10545-4:2019 Ceramic tiles and slabs - Part 4: determination of bending strength and breaking force
NF P19-829-4*NF EN 1170-4:1998 "Precast concrete products. Test method for glass-fibre reinforced cement. Part 4 : measuring bending strength, ""Simplified bending test"" method."
NF B51-008:1987 Wood - Static bending - Determination of ultimate strength in static bending using small clear specimens

Spanish Association for Standardization (UNE)

UNE 83509:2004 CONCRETE WITH FIBERS. FLEXURE STRENGTH
UNE-EN 310:1994 WOOD-BASED PANELS. DETERMINATION OF MODULUS OF ELASTICITY IN BENDING AND OF BENDING STRENGTH.
UNE-ISO 1209-2:2011 Rigid cellular plastics. Determination of flexural properties. Part 2: Determination on flexural strength and apparent flexural modulus of elasticity
UNE 67037:1999 HOLLOW CLAY BLOCKS FOR FLOORS. FLEXURE STRENGHT TEST.
UNE-EN 14617-2:2016 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
UNE-EN 14617-2:2005 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
UNE-EN 14617-2:2008 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)

SE-SIS

SIS SS 83 10 16-1989 Gutters - Determination of bending strength
SIS 23 51 06-1964 Fibre building boards. Determination of bending strength
SIS SS 13 73 08-1982 Autoclaved aerated concrete - Determination of bending strength

ESDU - Engineering Sciences Data Unit

ESDU 71027 A-2013 Endurance of high strength steels (in bending)
ESDU 71027 A-1974 Endurance of high strength steels (in bending).
ESDU 90002 C-2001 Struts: strength under flexural@ local and inter-rivet buckling.
ESDU 90002 B-1994 STRUTS: STRENGTH UNDER FLEXURAL@ LOCAL AND INTER-RIVET BUCKLING
ESDU 81007-2013 Fatigue strength in bending of steel I-beams with welded attachments
ESDU 81007-1981 Fatigue strength in bending of steel I-beams with welded attachments.

RO-ASRO

STAS SR EN 310-1996 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
STAS 9966-1974 HARDBOARD Determination of static bending slrength
STAS 337/1-1988 WOOD Delermination of ultimatc strcngh in static bending
STAS 4740-1989 Board and paperboard BENDING RESISTANCE DETERMI- NATION OF LOAD AND BENDING ANGLE

American Society for Testing and Materials (ASTM)

ASTM D7914/D7914M-21 Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations
ASTM C880/C880M-18e1 Standard Test Method for Flexural Strength of Dimension Stone
ASTM D7914/D7914M-14 Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations
ASTM C880-98 Standard Test Method for Flexural Strength of Dimension Stone
ASTM C880/C880M-15 Standard Test Method for Flexural Strength of Dimension Stone
ASTM RR-C28-1001 1996 C1161-Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C880/C880M-18 Standard Test Method for Flexural Strength of Dimension Stone
ASTM C880-06 Standard Test Method for Flexural Strength of Dimension Stone
ASTM C880/C880M-09 Standard Test Method for Flexural Strength of Dimension Stone

AT-ON

ONORM EN 310-1993 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
ONORM B 4650 Teil.7-1980 Steel structures; buckling of spherical Shells
ONORM B 4650 Teil.4-1977 Steel structures; buckling of circular cylindrical Shells

Society of Automotive Engineers (SAE)

SAE AIR1418B-2020 Flexure Fatigue Strength of Tube Fitting Joints
SAE AIR1418A-2013 Flexure Fatigue Strength of Tube Fitting Joints
SAE AIR1418-2011 FLEXURE FATIGUE STRENGTH OF TUBE FITTING JOINTS
SAE AIR1418A-1996 Flexure Fatigue Strength of Tube Fitting Joints
SAE TS356-1-1987 TS356 Test for Electrical Connectors Contact Bending Strength
SAE AMS3777/9B-1995 Tape, Nylon, Nonmelting, Reinforcing 2 (50) Wide, 3000 (13,345 N) Breaking Strength
SAE AIR1418A-1980 Flexure Fatigue Strength of Tube Fitting Joints R(2001)

TR-TSE

TS 2808-1977 EBONITE - Determination Of Cross - Breaking Strength
TS 2477-1976 Wood - Determination of Impact Bending Strength

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 4266.5(Int):2001 Reconstituted wood-based panels - Methods of test - Modulus of elasticity in bending and bending strength
AS/NZS 4266.5:2004/AMD 1:2006 Reconstituted wood-based panels - Methods of test Method 5: Modulus of elasticity in bending and bending strength
AS/NZS 4266.5:2004(R2006) Reconstituted wood-based panels - Methods of test Method 5: Modulus of elasticity in bending and bending strength

IPC - Association Connecting Electronics Industries

IPC TM-650 2.4.4.1A-1994 Flexural Strength of Laminates (at Elevated Temperature)
IPC TM-650 2.4.4B-1994 Flexural Strength of Laminates (at Ambient Temperature)

Korean Agency for Technology and Standards (KATS)

KS F 2566-2014 Standard test method for flexural performance of fiber reinforced concrete
KS L 1591-2013 Fine ceramics(advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramics at room temperature
KS L 1591-2008 Fine ceramics(advanced ceramics, advanced technical ceramics)-Test method for flexural strength of monolithic ceramics at room temperature
KS F 2566-2000 Test method for flexural toughness of steel fiber reinforced concrete
KS M ISO 1209-2-2022 Rigid cellular plastics－Determination of flexural properties－Part 2：Determination of flexural strength and apparent flexural modulus of elasticity
KS M ISO 1209-2-2012(2022) Rigid cellular plastics－Determination of flexural properties－Part 2：Determination of flexural strength and apparent flexural modulus of elasticity
KS K 0539-2010 Determination of flexural stiffness of fabrics：Flexometer method
KS F 2413-2020 Standard test method for compressive strength of concrete after flexural strength test
KS P ISO 9585:2010 Implants for surgery－Determination of bending strength and stiffness of bone plates
KS P ISO 9585:2021 Implants for surgery — Determination of bending strength and stiffness of bone plates
KS P ISO 9585-2010(2016) Implants for surgery－Determination of bending strength and stiffness of bone plates
KS D ISO 10065:2002 Steel bars for reinforcement of concrete &##8211;Bend and rebend tests

International Organization for Standardization (ISO)

ISO 3348:1975 Wood; Determination of impact bending strength
ISO 1209-2:2004 Rigid cellular plastics - Determination of flexural properties - Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
ISO 5402-2:2015 Leather - Determination of flex resistance - Part 2: Vamp flex method
ISO 9585:1990 Implants for surgery; determination of bending strength and stiffness of bone plates
ISO 10065:1990 Steel bars for reinforcement of concrete - Bend and rebend tests

PL-PKN

PN C04243-1972 Plastics Determination of flexural streng?hby Dynstat apparatus

Japanese Industrial Standards Committee (JISC)

JIS A 1106:1993 Method of test for flexural strength of concrete

GOST

GOST R 58527-2023 Wall materials. Methods for determination of ultimate compressive and bending strength
GOST 8462-1962 Wall and facing materials. Methods for determining compressive and bending strengths
GOST 6427-1975 Wall and facing materials. Method for determining density, compressive and bending strengths

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization

PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending (Edition P1)

AGMA - American Gear Manufacturers Association

932-A05-2005 Rating the Pitting Resistance and Bending Strength of Hypoid Gears

American Gear Manufacturers Association

AGMA 932-A05-2005 Rating the Pitting Resistance and Bending Strength of Hypoid Gears

VN-TCVN

TCVN 3119-1993 Heavy weight concrete.Method for the determination of flexural strength
TCVN 4032-1985 Cements.Test methods of bending and compression strengths
TCVN 6287-1997 Steel bars for reinforcement of concrete.Bend and rebend tests

KR-KS

KS P ISO 9585-2021 Implants for surgery — Determination of bending strength and stiffness of bone plates

TH-TISI

TIS 1683-1998 Implants for surgery.determination of bending strength and stiffness of bone plates

API - American Petroleum Institute

API BULL 5C4-1987 Bulletin on Round Thread Casing Joint Strength with Combined Internal Pressure and Bending

South African Bureau of Standard

SANS 5864:2006 Concrete tests - Flexural strength of hardened concrete