Thermoplastic composite testing

Thermoplastic composite testing, Total:225 items.

The international standard classification for "Thermoplastic composite testing" includes: Thermoplastic materials , Other construction materials , Plastics pipes, fittings and valves , Plastics , Plastics pipes .

The Chinese standard classification for "Thermoplastic composite testing" includes: Basic standards and general methods for synthetic resin and plastic , Building materials products in general , Plastic profile .

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 35469-2017 Test method of anti-mold activity of building wood-plastic composites
GB/T 34445-2017 Test method of hot-tack property for heat sealing surfaces of thermoplastic polymer and thermoplastic composite material
GB/T 34437-2017 Test method of the oxygen permeability of the multilayer composite plastics pipe

未注明发布机构

DIN EN ISO 2505 E:2021-07 Longitudinal recovery test methods and parameters for thermoplastic pipes (draft)
DIN EN ISO 2505 E:2003-04 Longitudinal recovery test methods and parameters for thermoplastic pipes (draft)
AS 3558.12:1999(R2016) Methods of testing plastics and composite materials sanitary plumbing fixtures - Determination of resistance to thermal shock of baths for ablutionary purposes
DIN EN 479 E:2016-12 Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of heat reversion
AS 3558.20:1999(R2016) Methods of testing plastics and composite materials sanitary plumbing fixtures - Determination of resistance to thermal shock of sinks
DIN EN 15534-1 E:2012-09 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products
DNV-ST-F207-2024 Hybrid thermoplastic composite flexible pipe

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 9352-2008 Plastic - Compression moulding of test specimens of thermoplastic materials
GB/T 8804.1-2003 Thermoplastic pipes - Determination of tensile properties - Party 1: General test method
GB/T 9647-2003 Thermoplastics pipes--Determination of ring stiffness
GB/T 9647-2015 Thermoplastics pipes―Determination of ring stiffness
GB/T 29418-2012 Test methods for mechanical and physical properties of wood-plastic composite product
GB/T 29418-2023 Test methods for properties of wood-plastic composite profile

Hebei Provincial Standard of the People's Republic of China

DB13/T 1696-2013 Thermoplastic polyolefin (TPO) self-adhesive composite waterproof membrane

Professional Standard - Forestry

LY/T 3364-2024 Flexible bamboo-plastic composite material

Group Standards of the People's Republic of China

T/SGX 018-2023 Recycled Plastics—Thermoplastic cross-linked polyethylene from cable for wood-plastic composites
T/GDPIA 66-2023 Recycled Plastics—Thermoplastic cross-linked polyethylene from cable for wood-plastic composites

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 39385-2020 Plastics piping and ducting systems—Thermoplastics pipes—Determination of ring flexibility

German Institute for Standardization

DIN EN ISO 2505:2005-08 Thermoplastics pipes - Longitudinal reversion - Test methods and parameters (ISO 2505:2005); German version EN ISO 2505:2005 / Note: To be replaced by DIN EN ISO 2505 (2021-07).
DIN EN ISO 2505:2024-01 Thermoplastics pipes - Longitudinal reversion - Test method and parameters (ISO 2505:2023); German version EN ISO 2505:2023
DIN EN ISO 2505:2021-07 Thermoplastics pipes - Longitudinal reversion - Test method and parameters (ISO/DIS 2505:2021); German and English version prEN ISO 2505:2021 / Note: Date of issue 2021-06-04*Intended as replacement for DIN EN ISO 2505 (2005-08).
DIN EN 13421:2006-05 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites; German version EN 13421:2005
DIN EN 15534-1:2018-02 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products; German version EN 15534-1:2014+A1:...
DIN EN 15534-5:2014-04 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles; German version EN 15534-5:2014 / Note: To be re...
DIN EN ISO 293:2023-06 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023); German version EN ISO 293:2023
DIN EN 12943:1999-12 Filler materials for thermoplastics - Scope, designation, requirements, tests; German version EN 12943:1999
DIN EN ISO 10724-2:2000 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 2: Small plates (ISO 10724-2:1998); German version EN ISO 10724-2:2000
DIN EN 13677-1:2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Part 1: Designation; German version EN 13677-1:2003
DIN EN ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials (ISO 295:2004); German version EN ISO 295:2004
DIN EN ISO 293:2023 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023)
DIN EN 13677-2:2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Part 2: Methods of test and general requirements; German version EN 13677-2:2003
DIN EN ISO 9967:2016-07 Thermoplastics pipes - Determination of creep ratio (ISO 9967:2016); German version EN ISO 9967:2016
DIN EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004); English version of DIN EN ISO 293
DIN EN ISO 295:2004-05 Plastics - Compression moulding of test specimens of thermosetting materials (ISO 295:2004); German version EN ISO 295:2004
DIN EN ISO 7808:1998 Plastics - Thermosetting moulding materials - Determination of transfer flow (ISO 7808:1992); German version EN ISO 7808:1998

Korean Agency for Technology and Standards (KATS)

KS M ISO 2505:2014 Thermoplastics pipes — Longitudinal reversion — Test method and parameters
KS M ISO 2505-2019 Thermoplastics pipes — Longitudinal reversion — Test method and parameters
KS M ISO 2505-1-2014 Thermoplastics pipes－Longitudinal reversion－Part 1：Determination methods
KS M ISO 10724-2:2010 Plastics－Injection moulding of test specimens of thermosetting powder moulding compounds(PMCs)－Part 2：Small plates
KS C 2007-2019 Testing methods for resistance of thermosetting plastic insulating materials
KS M ISO 295-2010(2020) Plastics－Compression moulding of test specimens of thermosetting materials
KS M ISO 9969-2021 Thermoplastics pipes－Determination of ring stiffness
KS M ISO 9967-2021 Thermoplastics pipes－Determination of creep ratio
KS M ISO 295:2010 Plastics-Compression moulding of test specimens of thermosetting materials
KS M ISO 2505-1-2003(2008) Thermoplastics pipes－Longitudinal reversion－Part 1：Determination methods
KS M ISO 7792-2-2013(2018) Plastics ㅡ Thermoplastic polyester(TP) moulding and extrusion materials ㅡ Part 2: Preparation of test specimens and determination of properties
KS C 2006-1998 Testing method for ball pressure of thermoplastics

European Committee for Standardization (CEN)

EN ISO 2505:2023 Thermoplastics pipes - Longitudinal reversion - Test method and parameters (ISO 2505:2023)
EN ISO 10724-2:2000 Plastics - Injection Moulding of Test Specimens of Thermosetting Powder Moulding Compounds (PMCs) - Part 2: Small Plates
EN ISO 9967:1995 Plastics Pipes - Determination of Creep Ratio (ISO 9967 : 1994)
EN ISO 293:2003 Plastics - Compression moulding test specimens of thermoplastic materials ISO 293: 1986
EN ISO 295:1998 Plastics - Compression Moulding of Test Specimens of Thermosetting Materials ISO 295:1991
EN ISO 9969:1995 Thermoplastic Pipes - Determination of Ring Stiffness (ISO 9969 : 1994)
EN ISO 293:2023 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023)
EN 15534-1:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products
PD CEN/TS 17158:2018 Composites made from cellulose based materials and thermoplastics (usually called wood polymer composites (WPC) or natural fibre composites (NFC)) - Determination of particle size of lignocellosic material

International Organization for Standardization (ISO)

ISO/DIS 2505 Thermoplastics pipes — Longitudinal reversion — Test method and parameters
ISO 293:2004 Plastics - Compression moulding of test specimens of thermoplastic materials
ISO 293:1986 Plastics; Compression moulding test specimens of thermoplastic materials
ISO 293:2023 Plastics — Compression moulding of test specimens of thermoplastic materials
ISO 2577:1975 Plastics — Thermosetting moulding materials — Determination of shrinkage of compression moulded test specimens in the form of bars
ISO 2557-1:1989 Plastics — Amorphous thermoplastics — Preparation of test specimens with a specified maximum reversion — Part 1: Bars
ISO 293:1974 Plastics — Compression moulding test specimens of thermoplastic materials
ISO 10724-2:1998 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 2: Small plates
ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials
ISO 295:1991 Plastics; compression moulding of test specimens of thermosetting materials
ISO 295:1974 Plastics; Compression moulding test specimens of thermosetting materials
ISO 12091:1995 Structured-wall thermoplastics pipes - Oven test

Danish Standards Foundation

DS/EN ISO 2505:2006 Thermoplastics pipes - Longitudinal reversion - Test method and parameters
DS/EN 13421:2006 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
DS/EN 12943:2000 Filler materials for thermoplastics - Scope, designation, requirements, tests
DS/EN ISO 9967:2008 Thermoplastics pipes - Determination of creep ratio
DS/EN ISO 9969:2008 Thermoplastics pipes - Determination of ring stiffness
DS/EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials

Lithuanian Standards Office

LST EN 13421-2006 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
LST EN ISO 2505:2005 Thermoplastics pipes - Longitudinal reversion - Test method and parameters (ISO 2505:2005)
LST EN 12943-2001 Filler materials for thermoplastics - Scope, designation, requirements, tests

AENOR

UNE-EN 13421:2006 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
UNE-EN ISO 2505:2006 Thermoplastics pipes - Longitudinal reversion - Test method and parameters (ISO 2505:2005)
UNE-EN 12943:2000 FILLER MATERIALS FOR THERMOPLASTICS - SCOPE, DESIGNATION, REQUIREMENTS, TESTS
UNE 135205:2014 Road signalisation equipment. Horizontal signalisation. Thermoplastics. Test methods. Determination of density thermoplastic materials cold.

ES-UNE

ISO 2505:2023 Thermoplastics pipes — Longitudinal reversion — Test method and parameters
UNE-CEN/TS 17158:2018 Composites made from cellulose based materials and thermoplastics (usually called wood polymer composites (WPC) or natural fibre composites (NFC)) - Determination of particle size of lignocellosic material (Endorsed by Asociación Española de Normaliz...
UNE-EN ISO 294-3:2021 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020)
UNE-EN ISO 293:2023 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023)
UNE-EN ISO 6259-1:2015 Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:2015)

GSO

BH GSO ISO 2505:2016 Thermoplastics pipes - Longitudinal reversion – Test method and parameters
OS GSO ISO 2505:2013 Thermoplastics pipes - Longitudinal reversion – Test method and parameters
GSO ISO 2505:2013 Thermoplastics pipes - Longitudinal reversion – Test method and parameters
GSO ISO 23559:2022 Plastics — Film and sheeting — Guidance on the testing of thermoplastic films
BH GSO ISO 293:2015 Plastics – compression moulding of test specimens of thermoplastic materials
OS GSO 1214:2002 Thermoplastic pipe bittings burst pressure test .
BH GSO ISO 23559:2023 Plastics — Film and sheeting — Guidance on the testing of thermoplastic films
GSO ISO 17771:2013 Plastics - Thermoset moulding compounds - Determination of the degree of fibre wetting in SMC
GSO ISO 293:2014 Plastics – compression moulding of test specimens of thermoplastic materials
BH GSO EN 479:2022 Plastics – Poly (vinyl chloride) (PVC) based profiles - Determination of heat reversion
GSO EN 479:2021 Plastics – Poly (vinyl chloride) (PVC) based profiles - Determination of heat reversion
GSO ISO 9969:2013 Thermoplastics pipes - Determination of ring stiffness
OS GSO ISO 9967:2013 Thermoplastics pipes - Determination of creep ratio
GSO ISO 9967:2013 Thermoplastics pipes - Determination of creep ratio

SCC

DANSK DS/EN ISO 2505:2006 Thermoplastics pipes – Longitudinal reversion – Test method and parameters
DANSK DS/ISO 2505:2023 Thermoplastics pipes – Longitudinal reversion – Test method and parameters
HOLDEN HN 1858-2012 Reinforced Thermoplastic Pet Polyester Compounds
HOLDEN HN 1858-2001 Reinforced Thermoplastic Pet Polyester Compounds
BS 2782-11 METHOD 1102B:1981 Methods of testing plastics. Thermoplastics pipes, fittings and valves-Longitudinal reversion of pipes: oven method
HOLDEN HN 1410-2001 Polytetrafluoro Ethylene Thermo Plastic Compound
BS 2782-11 METHOD 1102A:1981 Methods of testing plastics. Thermoplastics pipes, fittings and valves-Longitudinal reversion of pipes: immersion bath method
AENOR UNE-EN 13421:2006 Plastics - Thermoset molding compounds - Composites and reinforcement fibers - Preparation of specimens for determining the anisotropy of the properties of compression molding composites
DANSK DS/EN 13421:2006 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
NS-EN 13421:2006 Plastics — Thermoset moulding compounds — Composites and reinforcement fibres — Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
VDI 2019 BLATT 1-2014 Testing the adhesion of thermoplastic elastomers (TPE) to substrates — Injection-molded substrates
NS 2951:1972 Plastics pipes - Determination of reversion
NS-EN ISO 2505:2005 Thermoplastics pipes - Longitudinal reversion - Test method and parameters (ISO 2505:2005)
BS ISO 23559:2007 Plastics. Film and sheeting. Guidance on the testing of thermoplastic films
DANSK DS/EN ISO 293:2005 Plastics – Compression moulding of test specimens of thermoplastic materials
AENOR UNE-EN ISO 2505:2006 Thermoplastics pipes - Longitudinal reversion - Test method and parameters (ISO 2505:2005)
BS EN ISO 293:2005 Plastics. Compression moulding of test specimens of thermoplastic materials
BS 2782-11 METHOD 1104A:1983 Methods of testing plastics. Thermoplastics pipes, fittings and valves-Measurement of opacity of thermoplastics pipes and fittings
AENOR UNE-EN 12943:2000 FILLER MATERIALS FOR THERMOPLASTICS - SCOPE, DESIGNATION, REQUIREMENTS, TESTS
VDI 2019 BLATT 1-2014 Testing the adhesion of thermoplastic elastomers (TPE) to substrates — Injection-molded substrates
BS EN ISO 7792-2:2004 Plastics. Thermoplastic polyester (TP) moulding and extrusion materials-Preparation of test specimens and determination of properties
BS 2782-1 METHOD 132B:1976 Methods of testing plastics. Thermal properties-Determination of the blister temperature of thermosetting materials
VDI 2019-2016 Testing the adhesion of thermoplastic elastomers (TPE) to substrates
AS 3558.23:1989 Methods of testing plastics and composite materials sanitary plumbing fixtures - Determination of resistance to heat of the surface of sinks
DANSK DS/EN 479:2018 Plastics – Poly(vinyl chloride) (PVC) based profiles – Determination of heat reversion
BS EN ISO 294-3:1998 Plastics. Injection moulding of test specimens of thermoplastic materials-Small plates
AS 3558.16:1989 Methods of testing plastics and composite materials sanitary plumbing fixtures - Determination of resistance to thermal shock of washbasins
12/30266170 DC BS EN 15534-1. Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)). Test methods for characterisation of compounds and products
NS-EN 15534-1:2014+A1:2017 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products
DANSK DS/EN 15534-1+A1:2017 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) – Part 1: Test methods for characterisation of compounds and products
DANSK DS/EN ISO 9969:2016 Thermoplastics pipes - Determination of ring stiffness
VDI 2019-2016 Testing the adhesion of thermoplastic elastomers (TPE) to substrates
AS 1370:1973 Method for the determination of the softening point of thermoplastic moulding materials (bending test)
DANSK DS/ISO 293:2023 Plastics – Compression moulding of test specimens of thermoplastic materials
AENOR UNE-EN ISO 293:2006 Plastics - Compression molding of test specimens of thermoplastic materials (ISO 293:2004)
AENOR UNE 53027:1955 PLASTIC MATERIALS. DETERMINATION OF HEAT RESISTANCE
AS 3558.20:1989 Methods of testing plastics and composite materials sanitary plumbing fixtures - Determination of resistance to thermal shock of sinks
BS 2782-1 METHOD 115A:1978 Methods of testing plastics. Thermal properties-Plastic yield
AS 3558.12:1989 Methods of testing plastics and composite materials sanitary plumbing fixtures - Determination of resistance to thermal shock of baths for ablutionary purposes
BS 2782-9 METHOD 901A:1977 Methods of testing plastics. Sampling and test specimen preparation-Compression moulding test specimens of thermoplastic materials
BS 2782-9 METHOD 910A:1977 Methods of testing plastics. Sampling and test specimen preparation-Injection moulding test specimens of thermoplastic materials
BS 2782-9 METHOD 910A:1996 Methods of testing plastics. Sampling and test specimen preparation-Injection moulding test specimens of thermoplastic materials
AENOR UNE-EN 15534-1+A1:2018 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fiber composites (NFC)) - Part 1: Test methods for characterization of compounds and products
BS PD CEN/TS 17158:2018 Composites made from cellulose based materials and thermoplastics (usually called wood polymer composites (WPC) or natural fibre composites (NFC)). Determination of particle size of lignocellosic material

CZ-CSN

CSN 64 0808-1988 Testing of plastics. Determination of prooessing reversion and post-revcrsion of moulding thermo- plastics
CSN ISO 293:1992 Plastics. Compresion moulding test specimens of thermoplastic materials
CSN 64 0815-1986 Thermoplastic pipes. Methods for determination of longitudlnal reversion after annealing

RU-GOST R

PNST 36-2015 Nanomodified thermoplastical carbon composite. Specifications
GOST R 57863-2017 Polymer composites. Reinforced thermoplastic sheets. General technical requirements and test methods
GOST 27319-1987 Thermoplastic materials. Method of determination of thermal bonding strength
GOST 33372-2015 Polymer composites. Production of reinforced thermoplastic plates by moulding for preparation of test specimens

VDI - Verein Deutscher Ingenieure

VDI 2019 Blatt 1-2010 Testing the adhesion of TPE on substrates - Injection moulded substrates

British Standards Institution (BSI)

BS EN ISO 293:2006 Plastics - Compression moulding of test specimens of thermoplastic materials
BS EN ISO 293:2023 Plastics. Compression moulding of test specimens of thermoplastic materials
BS EN 15534-1:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)). Test methods for characterisation of compounds and products
BS EN ISO 294-3:2020 Plastics. Injection moulding of test specimens of thermoplastic materials - Small plates
BS ISO 20819-2:2023 Plastics. Wood-plastic recycled composites (WPRC) - Test methods
BS EN 479:2018 Plastics. Poly(vinyl chloride) (PVC) based profiles. Determination of heat reversion
BS 2782-6 Method 640A:1979 Methods of testing plastics. Dimensional properties. Determination of shrinkage of test specimens in the form of bars of compression moulded thermosetting moulding materials
BS EN ISO 10724-2:2001 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Small plates
BS EN ISO 10724-2:1999 Plastics. Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs). Small plates
BS EN ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials
BS ISO 10724-2:1999 Plastics. Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs). Small plates
BS EN 15534-6:2015 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)). Specifications for fencing profiles and elements
BS EN 15534-1:2014+A1:2017 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)). Specifications for cladding profiles and tiles
BS EN 15534-4:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)). Specifications for decking profiles and tiles
BS EN 15534-5:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)). Specifications for cladding profiles and tiles
BS EN ISO 294-2:2018 Plastics. Injection moulding of test specimens of thermoplastic materials. Small tensile bars
BS EN ISO 527-5:2021 Plastics. Determination of tensile properties. Test conditions for unidirectional fibre-reinforced plastic composites
BS EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Small plates
22/30445226 DC BS EN ISO 293. Plastics. Compression moulding of test specimens of thermoplastic materials
DD CEN/TS 15534-1:2007 Wood-plastics composites (WPC) — Part 1: Test methods for characterisation of WPC materials and products
BS EN 13677-1:2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Designation
BS EN 13677-2:2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Methods of test and general requirements

Association Francaise de Normalisation

NF EN ISO 293:2023 Plastiques - Moulage par compression des éprouvettes en matières thermoplastiques
NF T58-003*NF EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials
NF EN 13421:2006 Plastics - Thermoset molding compositions - Composites and reinforcing fibers - Preparation of specimens to determine anisotropy properties of compression molding composites
NF T58-300-1:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1 : test methods for characterisation of compounds and products
NF P24-503*NF EN 479:2018 Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of heat reversion
NF EN 15534-1/IN1:2018 Composites based on cellulosic materials and thermoplastics (commonly called wood-polymer composites (WPC) or naturally occurring fiber composites (NFC)) - Part 1: Test methods for the characterization of compositions and...
NF EN 15534-1+A1:2018 Composites based on cellulosic materials and thermoplastics (commonly called wood-polymer composites (WPC) or naturally occurring fiber composites (NFC)) - Part 1: Test methods for the characterization of compositions and...
NF EN 12943:2000 Produits d'apport pour thermoplastiques - Domaine d'application, désignation, exigences, essais
NF EN 28233:1991 Valves made of thermoplastic materials - Operating torque - Test method
NF T58-005*NF EN ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials
NF T58-300-1/IN1*NF EN 15534-1/IN1:2018 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1 : Test methods for characterisation of compounds and products
NF T58-300-1*NF EN 15534-1+A1:2018 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1 : Test methods for characterisation of compounds and products

International Truck and Engine Corporation (ITEC)

INTERN TMS 6040-2009 Thermoplastic Elastomer Molding Compounds
INTERN TMS 6040-2008 Thermoplastic Elastomer Molding Compounds

BELST

STB 1064-97 Floor tiles from thermoplastic material. Composites. Specifications
STB 1065-97 Roof tile from thermoplastic material composites. Specifications
STB 2041-2010 Thermoplastic composite products for road construction. Specifications

GOSTR

GOST R 58023-2017 Composite nanomaterials. Thermoplastic polymers modified by nanosilicates. Parameters and test methods

SE-SIS

SIS SS-IEC 811:1992 Cables - Test tnethodsfor insulations and sheaths of elastomeric and Ihermoplastic compounds
SIS SS 16 11 54-1980 Plastics — Injection moulding test specimens of thermoplastic materials

Association of German Mechanical Engineers

VDI 2019 Blatt 1-2012 Testing the adhesion of thermoplastic elastomers (TPE) on substrates - Injection moulded substrates
DVS 2211-2003 Welding consumables identification, requirements, testing of thermoplastics
DVS 2211-1979 "Filler materials for thermoplastics - Scope, designation, requirements, tests"

Japanese Industrial Standards Committee (JISC)

JIS K 7154-2:2002 Plastics -- Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) -- Part 2: Small plates
JIS K 7152:1995 Plastics -- Injection moulding of test specimens of thermoplastic materials

RO-ASRO

STAS 6127-1968 plastic. Determination of tear resistance of thermoplastic materials

AT-ON

ONORM M 7865-1990 Welding filier materials for thermoplastics; requirements, marking, tests

ZA-SANS

SANS 6046:2005 Detection of thermoplasticity in wood adhesives: Creep test

US-AAMA

AAMA 311-2013 Voluntary Specification for Rigid Thermoplastic Cellulosic Composite Fenestration Exterior Profiles
AAMA 505-1998 Dry Shrinkage And Composite Performance Thermal Cycling Test Procedure

CEN - European Committee for Standardization

EN ISO 9969:2007 Thermoplastics pipes - Determination of ring stiffness
EN ISO 9967:2007 Thermoplastics pipes - Determination of creep ratio

PT-IPQ

E 189-1966 Plastic material flat type. Surface thermal energy resistance test
E 190-1966 Plastic material flat type. Surface hydrothermal resistance test
E 278-1973 Thermoplastic board. Crash test
E 279-1973 Thermoplastic discs, dimensional stability testing

Standard Association of Australia （SAA）

AS 1145.5:2001 Determination of tensile properties of plastics materials - Test conditions for fibre-reinforced plastic composites
AS 3558.23:1999 Methods of testing plastics and composite materials sanitary plumbing fixtures - Determination of resistance to heat of the surface of sinks
AS 3558.20:1999 Methods of testing plastics and composite materials sanitary plumbing fixtures - Determination of resistance to thermal shock of sinks
AS 3558.12:1999 Methods of testing plastics and composite materials sanitary plumbing fixtures - Determination of resistance to thermal shock of baths for ablutionary purposes

The American Road & Transportation Builders Association

AASHTO T 250-2005(R2019) Standard Method of Test for Thermoplastic Traffic Line Material

TR-TSE

TS 1408-1978 PLASTICS - COMPRESSION MOULDING TEST SPECIMENS OF THERMOSETTING MATERIALS

KR-KS

KS M ISO 2505-2-2008 Thermoplastics pipes－Longitudinal reversion－Part 2：Determination parameters

American Society for Testing and Materials (ASTM)

ASTM D5939-96 Standard Test Method for Injection Moulding of Test Specimens of Thermoplatic Materials

PL-PKN

PN C89012-1988 Plastics Recommended practice for injection moulding test specirnens of thermoplastic materials
PN C89024-1993 Plastics. Thermoplastic materials. Determination of Vicat softening temperature

IN-BIS

IS 13360 Pt.6/Sec.1-1992 Plastics—Test Methods Part 6 Thermal Properties Section 1: Determination of Vicat Softening Temperature of Thermoplastic Materials

VN-TCVN

TCVN 5936-1995 Test methods for insulations and sheaths of electric cables and cords (Elastomeric and thermoplastic compounds)

Others: