gb8350 tooth shape

gb8350 tooth shape, Total:297 items.

The international standard classification for "gb8350 tooth shape" includes: Cutting tools , Milling tools , Chain drives and their components , Other cutting tools , Screw threads , Washers, locking elements , Couplings , Rolling bearings , Belt drives and their components , Motion picture equipment , Other machine tools , Steel bars and rods , Rubber and plastics products in general , Railway rolling stock in general .

The Chinese standard classification for "gb8350 tooth shape" includes: Manipulation system and its accessories , Combination grippers , Cutting tools , Chain drive, belt drive and key joint , Gear and thread cutting machine , Basic standards and general methods , Fastener , Coupling, brake and speed variator , Projection equipment and its accessory , Coal mine special equipment , Steel ingot and billet , Rubber tube, rubber belt and tape , Technical management , Universal parts .

Taiwan Provincial Standard of the People's Republic of China

CNS 6003-1980 Tooth Belt Pulleys for Sewing Machine
CNS 515-1978 Metric Buttress Screw Threads (Profiles)
CNS 516-1978 Metric Buttress Screw Thread (General Plan)
CNS 6419-1980 Pinion-Type Cutters for Cylindrical Gear Tolerances
CNS 6417-1980 Pinion-type Cutters for Cylindrical Gears Disc-gear Cutters for Spur Gears
CNS 6418-1980 Pinion-type Cutters for Cylindrical Gears Inter Shank-gear Cutters for Spur Gears
CNS 6416-1980 Pinion-type Cutters for Cylindrical Gears; Extended Hub Gear Cutters for Spur Gears
CNS 5986-1984 Calculation of Load Capacity for Cylindrical and Bevel Gears - Tooth form Factor Y F
CNS 4468-1978 Buttress Thread 45 degree for Hydraulic Presses
CNS 6002-1980 Tooth Belts for Sewing Machines
CNS 5435-1987 Dimensions of Starter Pinions and Ring Gears for Automobiles
CNS 10682-1983 Woodworking Crosscut Saws Tooth Shapes

Professional Standard - Aviation

HB 1670-1984 Toothed adjustable pressure plate
HB 1670-1987 Jagged Adjustable Compressor
HB 6474-1990 Tooth form washer
HB 2572-1976 Tower planetary gear

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 26103.1-2010 GIICL drum shape gear coupling
GB/T 21950-2008 Plunge shaving cutters
GB/T 13576.1-1992 Buttress threads with 3 and 30 degrese flank flank angle-Profiles
GB/T 10855-2003 tooth(silent) chains and sprockets
GB/T 14333-2008 Rotary axial shaving cutters
GB/T 10855-2016 Inverted tooth(silent) chains and sprockets
GB/T 956.2-1987 Countersunk serrated external toothed lock washers
GB 94.2-1987 Resilient Washer Specifications Toothed, Serrated Lock Washers
GB/T 13576.3-1992 Buttress threads with 3 and 30 degrees
GB/T 13576.4-1992 Buttress threads with 3 and 30 degrees flank angle-Tolerances
GB/T 28247-2012 Rotary gear milling cutters
GB/T 11361-2008 Synchronous belt drives - Trapezoidal toothed pulleys
GB/T 29027-2012 Large curved tooth coupling
GB/T 14333-1993 Rotary gear shaving cutters
GB/T 21945-2008 Numerical control sector gear shaping machines - Testing of the accuracy
GB/T 94.2-1987 Specifications for spring washers-Toothed lock and serrated lock washers
GB/T 26103.3-2010 Curved tooth coupling GCLD

未注明发布机构

DIN 21772 E:2007-11 Gears - Cylindrical involute gears and gear pairs - Definition of deviations
DIN 6798:1971 Serrated lock washers
DIN 5481 E:2017-08 Serrations
DIN 5481 E:2013-08 Serrations
DIN 58412:1967 Basic rack tooth profile for gear tools for fine mechanics; involute gears according DIN 58400 and DIN 867
DIN ISO 21771 E:2012-08 Gears - Cylindrical involute gears and gear pairs - Concepts and geometry
DIN 21773 E:2012-08 Gears - Cylindrical involute gears and gear pairs - Inspection dimensions of tooth thickness
DIN 58400:1967 Basic rack for involute teeth of cylindrical gears for fine mechanics

Professional Standard - Machinery

JB/T 11803-2014 Silent Chain Sprockets for Motorcycles
JB/T 11749-2013 Finger geal milling cutters
JB/T 9419-2011 Intermittent sprockets 16 tooth for 35mm motion-picture projector— tooth profiles，dimension and precision
JB/T 8854.2-2001 Curved-tooth coupling GⅡCL、GⅡCLZ
JB/T 88-2014 Serrated Metal Gaskets for Pipe Flanges
JB/T 9418-2011 Sprockets for 35mm motion-picture projectors— tooth profiles，dimension and precision
JB/T 3989.3-2014 Involute Cylindrical Gear Grinding Machines - Part 3: Gear Grinders with Forming Grinding Wheel - Testing of the Accuracy
JB/T 10540-2005 GSL curved-tooth type flexible coupling
JB/T 8854.3-2001 Curved tooh coupling GICL、GICLZ
JB/T 3990-1999 Gear Grinding Machine with Form Wheel Accuracy Inspection
JB/ZQ 4310-2006 saw-tooth thread with pitch diameter center
JB/T 8854.1-2001 Curved-tooth coupling GCLD
JB/T 5514-2007 TGL Curved-tooth coupling
JB/T 3988-1999 Accuracy Inspection of Butterfly Grinding Wheel Gear Grinding Machine
JB/T 9420-2010 Sprockets for 16mm motion-picture projectors-tooth profiles dimension and precision
JB/T 88-1994 Metal Dentate Gaskets for Pipeline Flanges
JB/T 10348-2013 Inverted Tooth Chains for Motorcycles
JB/T 5514-1991 TGL drum gear coupling
JB/T 3991-1999 Gear Grinding Machine with Taper Wheel Accuracy Inspection
JB/ZQ 4311-2006 Tolerance of trapezoidal and buttress thread
JB/T 9421-2010 Intermittent sprockets for 16mm motion-picture projectors-tooth profiles dimension and precision
JB/T 10348-2002 Inverted tooth chains for motorcycles
JB/T 54896-1999 Product quality classification of disc gear shaving cutter
JB/ZQ 4186-2006 WG drum gear coupling

Hebei Provincial Standard of the People's Republic of China

DB/T1300 W91 1-1987 MXL, HTD3M toothed belt

Group Standards of the People's Republic of China

T/SDAS 281-2021 Toothed chain for automobile engine
T/TCMCA 0029-2024 New seal toothed chain
T/ZZB 0430-2018 Gold and silver toothed stamp

Professional Standard - Coal

MT/T 462-1995 Multi-blade Inserted Balde Disk Hob

Professional Standard - Ferrous Metallurgy

YB/T 4263-2011 Button bits with special threads

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 33516-2017 Curved tooth coupling LZG

Professional Standard - Chemical Industry

HG/T 2703-1995 Small power trapezoidal tooth synchronous belt
HG/T 2703-2007 Synchronous belts for light duty power transmission

Professional Standard - Electron

SJ 2436.10-1984 U-form straight mouth bonding sheet with tooth and two sleeves on a shoe

Professional Standard - Railway

TB/T 3311-2013 Curved tooth coupling for EMUs

VE-FONDONORMA

NORVEN 24-4-1962 Circular gear rack
NORVEN 24-3-1962 Circular gear module

(U.S.) Ford Automotive Standards

FORD FLTM BP 111-1-2001 TOOTH SHEAR RESISTANCE OF TOOTHED DRIVE BELTS

SCC

VDI 3333-1977 Hobbing of spur gears with involute profile
BS 1807-2:1958 Gears for turbines and similar drives. Tooth form and pitches
BS 436-1:1967 Spur and helical gears-Basic rack form, pitches and accuracy (diametral pitch series)
AS B61.1:1974 Specification for spur and helical gears - Basic rack form, pitches and accuracy (diametral pich series)
AS B227:1966 Rotary form-relieved gear cutters
DIN ISO 21771 E:2012 Draft Document - Gears - Cylindrical involute gears and gear pairs - Concepts and geometry (ISO 21771:2007)
BS 436-2:1970 Spur and helical gears-Basic rack form, modules and accuracy (1 to 50 metric module)
VDI/VDE 2612 BLATT 1-2018 Measuring and testing gears — Evaluation of profile and flank line measurements on cylindrical gears with involute profile
DIN 8191 E:2021 Draft Document - Tooth form for chain wheels for inverted tooth chains complying with DIN 8190 - Dimensions of profile
AS B61.2:1975 Specification for spur and helical gears - Basic rack form, modules and accuracy (1 to 50 metric module)

Korean Agency for Technology and Standards (KATS)

KS B 5237-2019 Gear tooth vernier calipers
KS B 3960-2013 Gear cutter－Tooth profiles and dimensions
KS B 3960-2007(2012) Gear cutter－Tooth profiles and dimensions
KS B 3990-2002 Pinion type cutters
KS B ISO 7294:2002 Saw teeth for woodworking saws-Profile shape-Terminology and designation
KS B ISO 7294:2013 Saw teeth for woodworking saws－Profile shape－Terminology and designation
KS B 1325-2020 Toothed lock washers
KS W 1634-2005(2015) Serrated screw thread－locked in and ring locked insert
KS B ISO 53-2023 Cylindrical gears for general and heavy engineering — Standard basic rack tooth profile
KS W 1616-2004 Aerospace-Tooth lock washer
KS R 4085-2001 Commercial vehicles and buses-Cross-tooth gearbox flanges, type T
KS R 2034-2013 Washers for automobiles－Toothed lock washer and waved washer
KS B 1408-2020 Sprocket tooth form for transmission roller chains
KS B 1415-1978 Shapes and Dimensions of Helical Gears for General Use
KS W 1616-2004(2014) Aerospace－Tooth lock washer
KS B 1408-2005(2020) Sprocket tooth form for transmission roller chains
KS B 1414-1975 Shapes and Dimensions of Spur Gears for General Engineering
KS B 1415-1986 Shapes and Dimensions of Helical Gears for General Use
KS R 5014-2005(2010) Dimensions of starter pinions and ring gears for automobiles
KS B ISO 10828:2007 Worm geras－Geometry of worm profiles
KS B 1415-2016(2021) Shapes and Dimensions of Helical Gears for General Use

IT-UNI

UNI 6588-1969 Bevel gears. Basic rack.
UNI 6587-1969 Cylindrical gears. Basic rack.
UNI 6586-1969 Cylindrical and bevel gears. Series of modules.
UNI 7463-1975 Straight bevel gears. Data to be indicated on the drawings.
UNI 4654-1961 Alternating tooth disc milling cutter. for trapezoidal thread
UNI 4000-1960 Use a saw blade with filed or wavy teeth by hand. for metal materials
UNI 3707-1956 Toothed spring washer. Regulations and tests*

American Gear Manufacturers Association

AGMA 1106-A97-1997 Tooth Proportions for Plastic Gears
AGMA 13FTM03-2013 Analysis of Gear Root Forms: A Review of Designs, Standards and Manufacturing Methods for Root Forms in Cylindrical Gears
AGMA 908-B89-1989 Geometry Factors for Determining the Pitting Resistance and Bending Strength of Spur, Helical and Herringbone Gear Teeth
AGMA 913-A98-1998 Method for Specifying the Geometry of Spur and Helical Gears
AGMA 07FTM16-2007 Straight Bevel Gear Cutting and Grinding on CNC Free Form Machines
AGMA 99FTM8-1999 Power-Dry-Cutting of Bevel Gears
AGMA 98FTM7-1998 Checker of 3D Form Accuracy of Hypoid & Bevel Gear Teeth for the new Generation and Quality Control
AGMA 95FTM11-1995 Feature-Based Definition of Bevel Gears
AGMA 01FTM3-2001 Automated Spiral Bevel Gear Pattern Inspection

AGMA - American Gear Manufacturers Association

201.02-1968 Tooth Proportions for Coarse-Pitch Involute Spur Gears
207.05-1967 Tooth Proportions for Fine-Pitch Involvte Spur and Helical Gears
08FTM06-2008 Tooth Fillet Profile Optimization for Gears with Symmetric and Asymmetric Teeth
13FTM03-2013 Analysis of Gear Root Forms: A Review of Designs@ Standards and Manufacturing Methods for Root Forms in Cylindrical Gears
05FTM10-2005 Finite Element Study of the Ikona Gear Tooth Profile
1103-H07-2007 Tooth Proportions for Fine- Pitch Spur and Helical Gearing (Metric Edition)
98FTM11-1998 Improving Pump Gear Geometry Through Secondary Gear Tooth Finishing
98FTM7-1998 Checker of 3D Form Accuracy of Hypoid & Bevel Gear Teeth for the new Generation and Quality Control
05FTM04-2005 Tooth Meshing Stiffness Optimisation Based on Gear Tooth Form Determination for a Production Process Using Different Tools
11FTM19-2011 Convoloid Gearing Technology - The Shape Of The Future
P229.25-1982 New Method for Analyzing Gear Tooth Stress as a Function of Tooth Contact Pattern Shape and Position
118.01-1973 Information Sheet Gear Tooth Surface Texture for Aerospace Gearing (Surface Roughness@ Waviness@ Form and Lay)
93FTM4-1993 Stress Analysis of Spiral Bevel Gears A Novel Approach to Tooth Modelling
04FTM1-2004 Gear Noise - Challenge and Success Based on Optimized Gear Geometries
93FTM11-1993 The Relative Noise Levels of Parallel Axis Gear Sets with Various Contact Ratios and Gear Tooth Forms

VN-TCVN

TCVN 1066-1971 Gearing.Straight bevel gears.Basic profiles

FI-SFS

SFS 3093-1974 gear. Cylindrical gears and straight bevel [bevel] gears. module
SFS 3094-1974 gear. Cylindrical gear. Basic rack without root trimming
SFS 3095-1974 gear. Cylindrical gear. Basic rack with trimmed roots
SFS 5488-1988 In case of interpretation disputes the Finnish text applies
SFS 3960-1977 gear. Tapered Serrated Grinding Wheels, Design Information
SFS 3658-1976 gear. spiral shape. Thread shape ZA, ZN, Zl, ZK
SFS 3659-1976 gear. spiral shape. design information
SFS 3657-1976 gear. spiral shape. basic section
SFS 3969-1977 Grinding wheel. Size and shape. serrated grinding disc

Japanese Industrial Standards Committee (JISC)

JIS B 4350:2002 Gear cutter -- Tooth profiles and dimensions
JIS B 1704:2010 Bevel gear
JIS B 4350:1991 Gear cutter -- Tooth profiles and dimensions
JIS B 4357:1988 Rotary gear shaving cutters
JIS B 4357:2000 Rotary gear shaving cutters
JIS B 1701:1973 Involute gear tooth profile and dimensions
JIS F 7451:1978 Marine bevel gears
JIS B 9078:1992 Tooth belts for sewing machines
JIS B 1759:2013 Estimation of tooth bending strength of cylindrical plastic gears
JIS B 1802:1989 Sprocket tooth form for transmission roller chains
JIS B 9079:1968 Tooth belt pulleys for sewing machine
JIS B 1707:2018 Bevel gears -- Definitions and tolerance classification of tooth flank form deviations
JIS D 5204:1993 Road vehicles -- Dimensions of starter pinions and ring gears
JIS B 1722:1974 Shapes and dimensions of helical gears for general use

HU-MSZT

MSZ 1130-1982 circular gear
MSZ 2237-1961 serrated tapered wedge
MSZ 2237-1978 Toothed wedge pad
MNOSZ 1607-1953 Automotive gear oil, rectangular
MSZ 3837-1958 Milling machine tool needle with gear taper

CZ-CSN

CSN 22 2570-1976 Shell type gear shaper cutters for involute gears with straight teeth
CSN 95 1117-1955 Teeth H
CSN 22 2576-1976 Disc gear cutter hub gear cutter
CSN 95 1114-1955 tooth standard
CSN 22 4711-1960 Trapezoidal grinding segments
CSN 22 2501-1989 Hobbing cutters. Hobbing cutters for involute gearing. Basic tooth profiles
CSN 22 2949-1961 Circular saw blades with segments
CSN ON 22 2665-1964 Cutter cone wheel circular tooth plate
CSN 22 2165-1964 Fine-toothed shell-type side-and-face milling cutters
CSN ON 22 3213-1967 Circular threaded tooth plate. Thread
CSN 22 2543-1973 Washers of straight toothed rackshaped cutters
CSN 22 2161-1964 Coarse-toothed side-and-face shell-type milling cutters
CSN 22 2506-1982 Disc involute gear cutters with 1 - 12 mm module. Technical requirements
CSN 22 2580-1976 Disc gear cutter shank gear cutter
CSN 01 4603-1981 Terms for gear tolerances. Cyllndrical and double enveloping worm gears
CSN 01 4954-1978 Involute splines with pressure angle 30φ. Basic profile and teeth form
CSN 22 2941-1977 Metal segment circular saw blados. Dimension
CSN ON 22 2664-1964 Blank cutter for conical teeth
CSN 01 4609-1986 Gears with small module. Basic profile
CSN 22 5313-1966 Woodworking tools. Saw disks with fleam teeth for cross cutting
CSN ON 22 2606-1964 Conical wheel round tooth basic cutter head
CSN 22 5312-1966 Woodworking tools. Saw disks with fleam teeth for sawing

RO-ASRO

STAS 7644-1966 Technical drawing of conical gears and curved semi-bevel gears. Milling gear and wheel are labeled in the picture
STAS 6576-1962 Cylindrical gear measured with straight teeth
STAS 6985/2-1984 Toothing tools CONICAL TOOTHED WHEEL FLANING TOOLS Dimensions
STAS 2763/2-1983 Toolhing lools FLY CUTTERS Dimensions
STAS 7968-1967 Cylindrical spur and helical gear mechanisms. The reference flat wheel for the precision machinery industry
STAS 7967-1967 Cylindrical gear mechanism. The reference rack for the precision machinery industry
STAS 8079-1968 Cylindrical gear inspection equipment

German Institute for Standardization

DIN 1825:1977 Pinion-type cutters for cylindrical gears; disc-gear cutters for spur gears
DIN 58425-2:1980 Gears with round flanks for fine mechanics; gear profile
DIN 21773:2014 Gears - Cylindrical involute gears and gear pairs - Inspection dimensions of tooth thickness
DIN 1826:1977 Pinion-type cutters for cylindrical gears; extended hub gear cutters for spur gears
DIN 5481:2005 Serrations
DIN 21772:2012 Gears - Cylindrical involute gears and gear pairs - Definition of deviations
DIN 6798:1988 Serrated lock washers
DIN 15530-1:1981 Film 35 mm; sprockets, main dimensions, reference profile
DIN 867:1986-02 Basic rack tooth profiles for involute teeth of cylindrical gears for general engineering and heavy engineering
DIN ISO 21771:2014 Gears - Cylindrical involute gears and gear pairs - Concepts and geometry (ISO 21771:2007)
DIN 58400:1984 Basic rack for involute teeth of cylindrical gears for fine mechanics
DIN 8191:2022 Tooth form for chain sprockets for inverted tooth chains complying with DIN 8190 - Dimensions of profile
DIN ISO 21771:2014-08 Gears - Cylindrical involute gears and gear pairs - Concepts and geometry (ISO 21771:2007)
DIN 8153-2:1992-03 Flat-top chains for conveyors; tooth form for chain wheels; profile dimensions
DIN 513-1:1985 Metric buttress threads; thread profiles
DIN 6492-2:1974 Woodworking crosscut saws; tooth shapes
DIN 58412:1987 Basic rack tooth profile for gear tools for fine mechanics; involute gears according DIN 58400 and DIN 867

Association Francaise de Normalisation

NF E73-010*NF ISO 7294:2004 Saw teeth for woodworking saws - Profil shape - Terminology and designation.
NF E25-536:2017 Fasteners - Serrated washers with internal and external teeth - Flat shape - Symbol DD
NF E23-040*NF ISO 23509:2017 Bevel and hypoid gear geometry
NF E25-535:2017 Fasteners - Serrated washers internal teeth - Flat shape - Symbol DJC
NF E23-039*NF ISO 17485:2006 Bevel gears - ISO system of accuracy
NF E73-010:1984 Saw teeth for woodworking saws. Profile shape. Terminology and designation.
NF E27-627:1982 Serrated lock washers. External teeth. Concave form.
NF E25-534:2017 Fasteners - Serrated washers with external teeth - Flat shape - Symbol DEC
FD ISO/TR 10828:2016 Cylindrical screw gears – Geometry of screw profiles and gears
NF E66-620:2020 Outils à brocher - Dentures - Formes et dimensions
NF E22-152:1961 TAPERED STRAIGHT-SIDED SERRATIONS.
NF E66-239:1975 Inserted tooth cutters with 7/24 taper shank.
NF E25-512:1984 Internal tooth conical spring washers. Symbol CDJ.
NF E25-511:1984 Serrated conical spring washers. Symbol CS.
NF S84-801:1998 Horology. Wheel work shape and dimensions.

VDI - Verein Deutscher Ingenieure

VDI 3336-1972 Verzahnen von Stirnraedern (Zylinderraedern) mit Evolventenprofil; Spanende Verfahren
VDI 2142 Blatt 2-1994 Construction of planar cam mechanisms - Computer-aided profile calculation
VDI 2142 BLATT 1-2018 Construction of planar cam mechanisms - Fundamentals@ profile calculation and design
VDI/VDE 2612 BLATT 1-2016 Measurement and testing of gears - Evaluation of profile and helix measurements on cylindrical gears with involute profile

American National Standards Institute （ANSI)

ANSI/AGMA 6025-D-1998 Sound for Enclosed Helical, Herringbone, and Spiral Bevel Gear Drives
ANSI B1.9-1973 Buttress Inch Screw Threads
ANSI/AGMA ISO 17485-A:2008 Bevel Gears - ISO System of Accuracy
ANSI/AGMA 2005-D-2003 Design Manual for Bevel Gears

SE-SIS

SIS SMS 52-1972 Cylindrical and bevel gears. Modules
SIS SMS 1300-1966 Sawtooth blade woodworking saw. tooth shape
SIS SMS 2082-1973 Chain wheels. American type Wheel rim profile and tooth gap form
SIS SMS 2076-1973 Chain wheels. European type Wheel rim pro filé and tooth gap form
SIS SMS 2076-1966 Chain wheels. European type. Wheel rim profile and tooth gap form
SIS SMS 2075-1966 Chain wheels for conveyor chains. Tooth gap form
SIS SMS 2075-1976 Chain wheels for conveyor chains. Wheel rim profile and tooth gap form
SIS SMS 2995-1972 Cylindrical and bevel gears. Fatigue limits for steel and cast iron

BR-ABNT

ABNT PB-89-1973 Reference rack for cylindrical gear units

RU-GOST R

GOST 16891-1971 Portal rack-and-pinion-operated jigs with tapered clamp. Design
GOST 16890-1971 Plates for knee rack-and-pinion-operated jigs. Design
GOST 16893-1971 Plates for portal rack-and-pinion-operated jigs. Design
GOST 30224-1996 Novikov cilindrical gears with hardness of teeth surface not less 35 HRCe. Basic rack
GOST 16892-1971 Portal rack-and-pinion-operated jigs with air-actuated clamp. Design
GOST 16889-1971 Knee rack-and-pinion-operated jigs with air-actuated clamp. Design
GOST 10278-1981 Gages for buttress thread. Tolerances

Society of Automotive Engineers (SAE)

SAE J543-1995 Starting Motor Pinions and Ring Gears
SAE AS51997B-2005 Ring, Lock, Serrated-High Strength FSC 5365; UNS G41300; UNS G41400; UNS G87400; UNS S66286
SAE AS4958-1997 Performance, Nut, Self-Locking, Castellated, Prevailing Torque, UNJ 16 Pitch Thread Form UNS G41300 AND UNS G43400
SAE J1945-2000 Cross-Tooth Companion Flanges, Type T
SAE AS51997C-2020 RING, LOCK, SERRATED-HIGH STRENGTH
SAE AS51997B-2013 RING, LOCKED, SERRATED-HIGH STRENGTH

Defense Logistics Agency

DLA FF-W-100 C (1)-1980 WASHER, LOCK (TOOTH)
DLA FF-W-100 C-1969 WASHER, LOCK (TOOTH)
DLA FF-W-100 C NOTICE 1-2000 WASHER, LOCK (TOOTH)

IX-SA

AS 1969:1976 Toothed lock washer

British Standards Institution (BSI)

PD 6457:1970 Guide to the application of addendum modification to involute spur and helical gears
BS ISO 23509:2016 Bevel and hypoid gear geometry
BS 6433:1983 Terminology and designation of the profile shape of woodworking saw teeth
BS ISO 17485:2006 Bevel gears - ISO system of accuracy

International Organization for Standardization (ISO)

ISO/CD 23509-1:2023 Bevel and hypoid gear geometry
ISO 7294:1983 Saw teeth for woodworking saws; Profile shape; Terminology and designation Bilingual edition
ISO 17485:2006 Bevel gears - ISO system of accuracy
ISO 8667:1992 Commercial vehicles and buses; cross-tooth gearbox flanges; type T
ISO/TR 10828:1997 Worms gears - Geometry of worm profiles

GSO

OS GSO ISO 23509:2009 Bevel and hypoid gear geometry
GSO ISO 53:2013 Cylindrical gears for general and heavy engineering -- Standard basic rack tooth profile
GSO ISO 23509:2009 Bevel and hypoid gear geometry
GSO ISO/TR 10828:2014 Worm gears -- Geometry of worm profiles
GSO ISO 8736:2013 Taper pins with internal thread, unhardened

KR-KS

KS B ISO 53-2018(2023) Cylindrical gears for general and heavy engineering — Standard basic rack tooth profile

AT-ON

0NORM M 6760-3-1996 Drawing data for toothings - Cylindrical worms and wormgears

Indonesia Standards

SNI 05-3666-1995 Gear notation symbols for geometrical data

Aerospace Industries Association

AIA NASM21025-2000 Nut, Castellated, Hexagon FSC 5310
AIA NASM310-1998 Nut, Plain, Castellated, Airframe FSC 5310

SAE - SAE International

SAE AS51997A-2005 Ring@ Lock@ Serrated-High Strength
SAE AS51997-2001 Ring@ Lock@ Serrated-High Strength
SAE J1945-1990 CROSS-TOOTH COMPANION FLANGES@ TYPE T
SAE J1945-1995 Cross-Tooth Companion Flanges, Type T
SAE J1945-2006 Cross-Tooth Companion Flanges@ Type T
SAE ARP260D-1996 Control Lever Connections (60 Degree V Serrations)

PL-PKN

PN D01008-1993 Saw teeth for woodworking saws. Profile shape. Terminology and designation
PN BN 4516-07-1966 Multi-tine fork with ball handle

BE-NBN

NBN 446-1970 Cylindrical gears and conical gears. Modulus and diameter lateral angle

ES-AENOR

UNE 18 068 Cylindrical gear. Customer Instructions to Gear Unit Builder

IN-BIS

IS 10022-1981 Specification for open toothed V-belts
IS 10765-1983 Forceps Specifications Anatomical Toothed and Bayonet Cushing Patterns

CH-SNV

SEV 3008-1964 Vortex line. Engage. Geometric concepts of cylindrical gears and bevel gears

Others: Tooth size,Tooth shape,Nut profile,Commercial vehicle and bus cross-tooth gearbox flanges,Toothed gasket what?,Toothed chain,toothed chain for motorcycle