GB 3882 2017 Download

GB 3882 2017 Download, Total:478 items.

The international standard classification for "GB 3882 2017 Download" includes: Rolling bearings , Ground service and maintenance equipment , Tunnelling and tubbing equipment , Earth-moving machinery , Other materials for the reinforcement of composites , Astronomy. Geodesy. Geography , Gears , Timber structures .

The Chinese standard classification for "GB 3882 2017 Download" includes: Rolling bearing , AGS system and equipment , Mining equipment , Storage equipment and handling machinery , Fibre reinforced composites , Special vehicles , Gear and gear drive , Timber engineering , Blankets .

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 3882-2017 Rolling bearings—Insert bearings and eccentric looking collars—Boundary dimensions

国家海洋局

HY/T 225-2017 Manned submersible diving operation procedures

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 23420-2009 Aircraft - Wide body aircraft lower deck container/pallet loader - Functional requirements
GB/T 4652-2003 Testing method of loader for underground mining
GB 25525-2010 Track-type loading machine underground mine - Safety requirements
GB/T 23420-2024 Aircraft lower deck container cargo loader
GB/T 31295-2014 The core to wind turbine blade―Determination of dimensional stability at elevated temperatures with flexural load and with compressive load
GB 25524-2010 Track wheel loading machine for underground mine - Safety requirements

工业和信息化部

SJ/T 11761-2020 Specifiction for tool load port used for wafer of less than or equal to 200 mm diameter
YD/T 3104-2016 Test method for downloading over the air terminal

Group Standards of the People's Republic of China

T/CANSI 119-2023 General requirements for selection and operation of shipborne Remotely Operated Vehicle
T/TAF 078.7-2020 App user rights and interests protection evaluation standard download distribution behavior
T/YH 1004-2020 Low temperature internal pressure test method of launch vehicle tank under liquid nitrogen medium
T/TAF 104-2021 Test and evaluation specification for download, installation and upgrade of mobile applications
T/QGCML 3928-2024 Heavy duty construction vehicle wheels for underground loaders
T/LWB 031-2021 Rated voltage 20kV and below load-bearing overhead insulated cables
T/GDMA 40-2021 Specification for downloading ripple and symbol timing synchronization under low signal-to-noise ratio conditions

Professional Standard - Post and Telecommunication

YD/T 4776-2024 Business terminology of in-vehicle information services in the mobile Internet environment
YD/T 2357-2011 Platform technical requirement for download over the air
YD/T 2359-2011 Terminal Technical Requirement for Download Over the Air
YD/T 2358-2011 General Technical Requirement for Download Over the Air

Professional Standard - Radio Television Film

GY/T 255-2012 Downloadable Conditional Access System Technical Specifications

未注明发布机构

DIN EN 12430:1998 Thermal insulating products for building applications - Determination of behaviour under point load
DIN EN 1569 E:2018-11 Surfaces for sports areas - Determination of the behaviour under a rolling load
IEEE Std C37.74-2014 Standard requirements for underground, basement and base-mounted load interrupting switchgear and fused load interrupting switchgear for AC systems of 38kv and below
ASTM RR-D14-1015 2012 D0905-Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
DIN EN 12430 E:2012-07 Thermal insulating products for building applications - Determination of behaviour under point load
DIN 4019-2:1961 Subsoil; Settlement Calculations in the Case of Inclined and Eccentrically Acting Loading
NF P94-117-2:2004 Sols : reconnaissance et essais - Portance des plates-formes - Partie 2 : module sous chargement dynamique
DIN EN ISO 15236-3:2017 Steel cord conveyor belts – Part 3: Particular safety requirements for underground use (ISO 15236-3:2017); German version EN ISO 15236-3:2017
DIN 4017 E:2001-06 Soil - Calculation of design bearing capacity of soil beneath shallow foundations

国家新闻出版广电总局

GY/T 308-2017 Technical specifications for one-way downloadable conditional access system

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 3480.6-2018 Calculation of load capacity of spur and helical gears—Part 6:Calculation of service life under variable load
GB/T 4652-2021 Loader for underground mining—Testing method
GB/T 39624-2020 Technical specification for underwater topographic survey of airborne lidar

Professional Standard - Forestry

LY/T 2380-2014 Standard test method for performance of wood-based floor and roof sheathing under concentrated static and impact loads

Professional Standard - Light Industry

QB/T 1091-2001 Test Method for Carpet Thickness Reduction under Dynamic Load
QB/T 1091-1991 Test method for thickness loss of carpet under dynamic load

轻工业部

QB 1091-1991 Test Method for Carpet Thickness Reduction under Dynamic Load

国家林业和草原局

LY/T 3229-2020 Specification for indoor carrying capacity of wood-based panels and finishing products based on volatile organic compounds emission

Military Standard of the People's Republic of China-General Armament Department

GJB 6635-2008 Measurement method for infrared radiation feature of target and background by means of airborne downward looking

Professional Standard - Energy

NB/T 10902-2021 Technical conditions and installation requirements of 20kW and below non-on-board charger

IETF - Internet Engineering Task Force

RFC 5854-2010 The Metalink Download Description Format

German Institute for Standardization

DIN ISO 18406:2018 Underwater acoustics - Measurement of radiated underwater sound from percussive pile driving (ISO 18406:2017)
DIN ISO 76:2018 Rolling bearings - Static load ratings (ISO 76:2006 + Amd.1:2017); Text in German and English
DIN ISO 76:2019 Rolling bearings - Static load ratings (ISO 76:2006 + Amd.1:2017)
DIN EN ISO 13260:2018 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading (ISO 13260:2010 + Amd.1:2017) (includes Amendment :2017)
DIN EN ISO 25110:2018 Electronic fee collection - Interface definition for on-board account using integrated circuit card (ICC) (ISO 25110:2017); English version EN ISO 25110:2017
DIN EN ISO 19225:2020 Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems (ISO 19225:2017 + Amd 1:2019) (includes Amendment :2019)
DIN EN 13796-3:2017 Safety requirements for cableway installations designed to carry persons - Carriers - Part 3: Fatigue testing; German version EN 13796-3:2017
DIN ISO 20056-2:2019 Rolling bearings - Load ratings for hybrid bearings with rolling elements made of ceramic - Part 2: Static load ratings (ISO 20056-2:2017)
DIN EN 12397:2017 Safety requirements for cableway installations designed to carry persons - Operation; German version EN 12397:2017
DIN ISO 7798:2018 Cross-country skis - Determination of fatigue indexes - Cyclic loading test (ISO 7798:2017)
DIN EN 1907:2018 Safety requirements for cableway installations designed to carry persons - Terminology; Trilingual version EN 1907:2017
DIN 4019-2:1981 Subsoil; Settlement Calculations in the Case of Inclined and Eccentrically Acting Loading
DIN EN 12028:1996-07 Self adhesive tapes - Measurement of elongation under static load; German version EN 12028:1996
DIN EN 13796-1:2017 Safety requirements for cableway installations designed to carry persons - Carriers - Part 1: Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers; German version EN 13796-1:2017
DIN ISO 20056-1:2019 Rolling bearings - Load ratings for hybrid bearings with rolling elements made of ceramic - Part 1: Dynamic load ratings (ISO 20056-1:2017)
DIN EN 1569:2020 Surfaces for sports areas - Determination of the behaviour under a rolling load
DIN EN 1569:2000 Surfaces for sports areas - Determination of the behaviour under a rolling load; German version EN 1569:1999
DIN EN ISO 10960:2018-05 Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions (ISO 10960:2017); German version EN ISO 10960:2018
DIN EN ISO 10960:2018 Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions (ISO 10960:2017)
DIN EN 1909:2017 Safety requirements for cableway installations designed to carry persons - Recovery and evacuation; German version EN 1909:2017
DIN EN 1569:2020-07 Surfaces for sports areas - Determination of the behaviour under a rolling load; German version EN 1569:2020
DIN EN 12430:2007 Thermal insulating products for building applications - Determination of behaviour under point load（includes Amendment A1-2006）;English version of DIN EN 12430:2007-06
DIN 4017:2006-03 Soil - Calculation of design bearing capacity of soil beneath shallow foundations
DIN 4018:1974-09 Subsoil; Calculation of the Bearing Pressure Distribution under Spread Foundations
DIN 20594:1991 Suspension claws for mining, for loads up to 30 kN; requirements and testing
DIN EN IEC 62271-110:2018 High-voltage switchgear and controlgear - Part 110: Inductive load switching (IEC 62271-110:2017 + COR1:2017 + COR2:2018); German version EN IEC 62271-110:2018 + AC:2018
DIN ISO 10129:2019 Plain bearings - Testing of bearing metals - Resistance to corrosion by lubricants under static conditions (ISO 10129:2017)
DIN EN 62488-2:2019 Power line communication systems for power utility applications - Part 2: Analogue power line carrier terminals or APLC (IEC 62488-2:2017); English version EN 62488-2:2017
DIN EN 13796-2:2017 Safety requirements for cableway installations designed to carry persons - Carriers - Part 2: Slipping resistance tests for grips; German version EN 13796-2:2017
DIN ISO 14728-2:2018 Rolling bearings - Linear motion rolling bearings - Part 2: Static load ratings (ISO 14728-2:2017)
DIN EN ISO 17892-6:2017 Geotechnical investigation and testing - Laboratory testing of soil - Part 6: Fall cone test (ISO 17892-6:2017); German version EN ISO 17892-6:2017
DIN EN 12430:2013-05 Thermal insulating products for building applications - Determination of behaviour under point load; German version EN 12430:2013
DIN 3991-4:1988-09 Calculation of load capacity of bevel gears without pinion offset; calculation of scuffing load capacity
DIN EN 61851-21-1:2018 Electric vehicle conductive charging system - Part 21-1: Electric vehicle on-board charger EMC requirements for conductive connection to an AC/DC supply (IEC 61851-21-1:2017); German version EN 61851-21-1:2017 + AC:2017
DIN EN 15336:2007-05 Adhesives - Determination of the time to rupture of bonded joints under static load (ISO 15109:1998 modified); German version EN 15336:2007
DIN EN 13793:2003-12 Thermal insulating products for building applications - Determination of behaviour under cyclic loading; German version EN 13793:2003
DIN EN 13793:2003 Thermal insulating products for building applications - Determination of behaviour under cyclic loading; German version EN 13793:2003
DIN EN 1533:2010-12 Wood flooring - Determination of bending strength under static load - Test methods; German version EN 1533:2010
DIN EN 13155:2017 Crane - Safety - Non-fixed load lifting attachments; German and English version prEN 13155:2017
DIN EN 977:1997 Underground tanks of glass-reinforced plastics (GRP) - Method for one side exposure to fluids; German version EN 977:1997
DIN EN ISO 11298-1:2017 Plastics piping systems for renovation of underground water supply networks - Part 1: General (ISO/DIS 11298-1:2017); German and English version prEN ISO 11298-1:2017
DIN ISO 10129:2018 Plain bearings - Testing of bearing metals - Resistance to corrosion by lubricants under static conditions (ISO 10129:2017); Text in German and English

SCC

NS-EN ISO 19225:2017 Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems (ISO 19225:2017)
DANSK DS/EN ISO 19225/A1:2019 Underground mining machines – Mobile extracting machines at the face – Safety requirements for shearer loaders and plough systems (ISO 19225:2017)
DIN ISO 18406 E:2018 Draft Document - Underwater acoustics - Measurement of radiated underwater sound from percussive pile driving (ISO 18406:2017); Text in German and English
DIN ISO 76 E:2018 Draft Document - Rolling bearings - Static load ratings (ISO 76:2006 + Amd.1:2017); Text in German and English
DIN EN ISO 19225/A1 E:2019 Draft Document - Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems (ISO 19225:2017/DAM 1:2018); German and English version EN ISO 19225:2017/prA1:2018
AENOR UNE 53291:1990 PLASTICS. DETERMINATION OF THE DEFORMATION OF PLASTICS UNDER LOAD
BS ISO 7992:1992 Iron ores. Determination of reduction properties under load
DIN EN IEC 62928:2018 Railway applications - Rolling stock - Onboard lithium-ion traction batteries (IEC 62928:2017); German version EN IEC 62928:2018
DIN EN ISO 19085-13 E:2017 Draft Document - Woodworking machines - Safety - Part 13: Multi-blade rip sawing machines with manual loading and/or unloading (ISO/DIS 19085-13:2017); German and English version prEN ISO 19085-13:2017
NS-EN 12028:1996 Self-adhesive tapes — Measurement of elongation under static load
NS-EN ISO 10960:2018 Rubber and plastics hoses — Assessment of ozone resistance under dynamic conditions (ISO 10960:2017)
DIN ISO 7798 E:2017 Draft Document - Cross-country skis - Determination of fatigue indexes - Cyclic loading test (ISO/DIS 7798:2017); Text in German and English
AENOR UNE-EN ISO 10960:2018 Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions (ISO 10960:2017)
DANSK DS/EN ISO 10960:2018 Rubber and plastics hoses – Assessment of ozone resistance under dynamic conditions (ISO 10960:2017)
AENOR UNE-EN ISO 287:2018 Paper and paperboard. Determination of the moisture content of a batch. Oven drying method. (ISO 287:2017).
BS CWA 14174-5:2001 Financial transactional IC card reader (FINREAD). Download file format
NS-EN 1569:1999 Surfaces for sports areas — Determination of the behaviour under a rolling load
DANSK DS/EN 1569:2020 Surfaces for sports areas – Determination of the behaviour under a rolling load
DIN EN ISO 15175 E:2017 Draft Document - Soil quality - Characterization of soil related to groundwater protection (ISO/DIS 15175:2017); German and English version prEN ISO 15175:2017
NS-EN 12430:1998 Thermal insulating products for building applications — Determination of behaviour under point load
NS-EN 1569:2020 Surfaces for sports areas — Determination of the behaviour under a rolling load
AENOR UNE 53578:1974 Elastomers. Determination of the remaining compression deformation under constant load.
DIN EN ISO 22477-1 E:2017 Draft Document - Geotechnical investigation and testing - Testing of geotechnical structures - Part 1: Pile load test by static axially loaded compression (ISO/DIS 22477-1:2017); German and English version prEN ISO 22477-1:2017
DANSK DS/EN 13793:2003 Thermal insulation products for building applications - Determination of behaviour under cyclic loading
AENOR UNE-EN 12430:2013 Thermal insulating products for building applications - Determination of behavior under point load
CSA C802.5-16:2016 Guideline for Evaluating the Performance of Dry-Type Transformers Subject to Nonlinear Loads
DANSK DS/EN 12430:2013 Thermal insulating products for building applications - Determination of behaviour under point load
UNE 53578:1974 ELASTOMERS. DETERMINATION OF COMPRENSION SET UNDER CONSTANT LOAD
NS-EN 12430:2013 Thermal insulating products for building applications — Determination of behaviour under point load
DIN CLC IEC/TS 60079-43:2023 Explosive atmospheres - Part 43: Equipment in adverse service conditions (IEC/TS 60079-43:2017); German version CLC IEC/TS 60079-43:2021
DIN EN ISO 10960 E:2017 Draft Document - Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions (ISO/FDIS 10960:2017); German and English version prEN ISO 10960:2017
ITU-T J.1026-2019 Downloadable conditional access system for unidirectional networks – Requirements
ITU-T J.1033-2020 Downloadable conditional access system for bidirectional networks – The terminal
BS EN ISO 75-2:1996 Plastics. Determination of temperature of deflection under load-Plastics and ebonite
CAN/CSA-ISO/IEC 23004-5:2008(R2013) Information technology - Multimedia middleware - Part 5: Component download
AENOR UNE-EN 1533:2010 Wood flooring - Determination of bending strength under static load - Test methods
ITU-T J.1031-2020 Downloadable Conditional Access System for Bidirectional Network - Requirements
DIN ISO 20056-2 E:2018 Draft Document - Rolling bearings - Load ratings for hybrid bearings with rolling elements made of ceramic - Part 2: Static load ratings (ISO 20056-2:2017); Text in German and English
BS EN ISO 75-1:1996 Plastics. Determination of temperature of deflection under load-General test method
DANSK DS/EN 1533:2010 Wood flooring - Determination of bending strength under static load - Test methods
NS-EN 1533:2010 Wood flooring — Determination of bending strength under static load — Test methods
DANSK DS/ISO/IEC 23004-5:2008 Information technology - Multimedia Middleware - Part 5: Component download
DIN ISO 14728-2 E:2017 Draft Document - Rolling bearings - Linear motion rolling bearings - Part 2: Static load ratings (ISO 14728-2:2017); Text in German and English
DANSK DS/EN 15336:2007 Adhesives - Determination of the time to rupture of bonded joints under static load
NS-EN 13793:2003 Thermal insulating products for building applications — Determination of behaviour under cyclic loading
DIN EN 1569 E:2018 Draft Document - Surfaces for sports areas - Determination of the behaviour under a rolling load; German and English version prEN 1569:2018
AENOR UNE-EN 13793:2008 Thermal insulating products for building applications - Determination of behavior under cyclic loading
DIN ISO 20056-1 E:2018 Draft Document - Rolling bearings - Load ratings for hybrid bearings with rolling elements made of ceramic - Part 1: Dynamic load ratings (ISO 20056-1:2017); Text in German and English
DANSK DS/ISO 6336-6:2019 Calculation of load capacity of spur and helical gears – Part 6: Calculation of service life under variable load
AENOR UNE 85229:1985 Window testing methods. Water tightness test under repeated static pressure loads.
07/30165804 DC BS ISO 29769. Thermal insulating products for building applications. Determination of behaviour under point load
12/30259145 DC BS EN 12430. Thermal insulating products for building applications. Determination of behaviour under point load

ACI - American Concrete Institute

ACI 408.2R-1992 BOND UNDER CYCLIC LOADS
ACI 408.2R-2012 Report on Bond of Steel Reinforcing Bars Under Cyclic Loads
ACI 364.4T-2010 Determining the Load Capacity of a Structure When As-Built Drawings are Unavailable

NATO - North Atlantic Treaty Organization

STANAG 2445-2011 CRITERIA FOR THE CLEARANCE OF HELICOPTER UNDERSLUNG LOAD EQUIPMENT (HUSLE) AND UNDERSLUNG LOADS (USLs) (ED 4; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +

British Standards Institution (BSI)

BS EN ISO 11547:1996 Small craft. Start-in-gear protection
BS PD CEN/TR 1295-4:2015 Structural design of buried pipelines under various conditions of loading. Parameters for reliability of the design
BS ISO 6336-6:2019 Calculation of load capacity of spur and helical gears - Calculation of service life under variable load
BS ISO 2094:1999 Textile floor coverings - Determination of thickness loss under dynamic loading
BS ISO 6968:2005 Aircraft ground equipment. Lower deck loader. Functional requirements
BS CWA 14174-5:2004 Financial transactional IC card reader (FINREAD) - Download file format
BS ISO 23671:2006 Passenger car tyres - Method for measuring relative wet grip performance - Loaded new tyres
BS ISO 23671:2015 Passenger car tyres. Method for measuring relative wet grip performance. Loaded new tyres
BS ISO 23671:2021 Passenger car tyres. Method for measuring relative wet grip performance. Loaded new tyres
BS EN 12430:2013 Thermal insulating products for building applications. Determination of behaviour under point load
BS EN 1569:2020 Surfaces for sports areas. Determination of the behaviour under a rolling load
BS EN ISO 75-2:2013 Plastics. Determination of temperature of deflection under load. Plastics and ebonite
BS ISO 11662-2:2014 Mobile cranes. Experimental determination of crane performance. Structural competence under static loading
BS EN ISO 75-1:2004 Plastics - Determination of temperature of deflection under load - General test method
BS EN ISO 75-1:2020 Plastics. Determination of temperature of deflection under load. General test method
BS EN 1889-1:2003 Machines for underground mines - Mobile machines working underground - Safety - Rubber tyred vehicles
18/30380091 DC BS EN 1569. Surfaces for sports areas. Determination of the behaviour under a rolling load
BS EN 13793:2003 Thermal insulating products for building applications - Determination of behaviour under cyclic loading
BS EN ISO 75-1:2013 Plastics. Determination of temperature of deflection under load. General test method
ASTM F2267-24 Standard Test Method for Measuring Load-Induced Subsidence of Intervertebral Body Fusion Device Under Static Axial Compression

WRC - Welding Research Council

BULLETIN 1003- PIPELINE ENGINEERING PART 2B DOWNLOAD
BULLETIN 1001- PIPELINE ENGINEERING PART 1 DOWNLOAD
BULLETIN 1006- PIPELINE ENGINEERING PART 4 DOWNLOAD
BULLETIN 1002- PIPELINE ENGINEERING PART 2A DOWNLOAD
BULLETIN 1007- PIPELINE ENGINEERING PART 5 DOWNLOAD
BULLETIN 1008- PIPELINE ENGINEERING PART 6 DOWNLOAD
BULLETIN 1004- PIPELINE ENGINEERING PART 3A DOWNLOAD
BULLETIN 1005- PIPELINE ENGINEERING PART 3B DOWNLOAD
BULLETIN 1009- PIPELINE ENGINEERING PART 7 AND 8 DOWNLOAD

ES-AENOR

UNE 53-291-1990 Determination of plastic deformation under ballast

ESDU - Engineering Sciences Data Unit

ESDU 08007-2009 Strength of lugs under oblique load
ESDU 91008 A-2011 Strength of lugs under axial load
ESDU 06021-2006 Strength of lugs under transverse load.
ESDU 06009-2006 Fatigue damage and life under random loading.
ESDU 73004 A-2013 Criteria of yielding for ductile materials under static loading
ESDU 73004 A-1985 Criteria of yielding for ductile materials under static loading.
ESDU 73025 A-1976 Stresses in the core of a sandwich panel under local normal loading.
ESDU 68045-1968 Fatigue strength of large steel screw threads under axial loading.
ESDU 95026-2012 Edge effects on the response of sandwich panels subjected to acoustic loading
ESDU 95026-2011 Edge effects on the response of sandwich panels subjected to acoustic loading
ESDU 84001-1984 Growth of cracks under constant amplitude fatigue loading: example calculations.
ESDU 95026-1995 Edge effects on the response of sandwich panels subjected to acoustic loading.
ESDU 13008-2010 Fatigue strength of low-carbon steel stud threads under axial and combined axial and bending loading
ESDU 69024-1969 The cumulative damage of aluminium alloy specimens under variable amplitude fatigue loading.
ESDU 72019 B-1994 Buckling of flat isotropic plates under uniaxial and biaxial loading.
ESDU 67020 A-1969 Fatigue strength of steel screw threads with large root radii under axial loading.
ESDU 18003-2019 Form factors for flanged sections under combined bending and axial load
STRUCT 01.06.02-1956 Form factors for flanged sections under combined bending and axial load.
ESDU 72015 B-1984 Endurance of aluminium alloy structural elements subjected to simulated acoustic loading.
ESDU 78023 A-2013 Fatigue strength of transverse fillet welded joints and attachments in steels under bending loading
STRUCT 01.06.01-1956 Form factors for circular sections under combined bending and axial load.

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE 0671-110-2018 High-voltage switchgear and controlgear - Part 110: Inductive load switching (IEC 62271-110:2017 + COR1:2017 + COR2:2018); German version EN IEC 62271-110:2018 + AC:2018

YU-JUS

JUS M.E2.260-1991 Tube under interna! or exterior pressure overload. Calculation

Malaysia Standards

MS 395-1976 Test method for refractoriness under load

Association Francaise de Normalisation

NF J95-030:1995 Small craft. Star-in-gear protection.
NF X41-045*NF EN 12028:1996 Self adhesive tapes. Measurement of elongation under static load.
NF EN 1569:2020 Sols sportifs - Détermination du comportement sous charge roulante
NF EN 12028:1996 Self-adhesive tapes - Measurement of elongation under static load
NF ISO 7797:1994 Cross-country skis - Determination of the breaking load and the deformation at break under quasi-static load
NF E23-030-6:2006 Calculation of load capacity of spur and helical gears - Part 6 : calculation of service life under variable load.
NF P90-118*NF EN 1569:2020 Surfaces for sports areas - Determination of the behaviour under a rolling load
XP P94-429:2002 Roches - Résistance sous charge ponctuelle - Essai Franklin
NF P90-118:1999 Surfaces for sports areas - Determination of the behaviour under a rolling load.
FD ISO 6968:2006 Aircraft Ground Equipment - Lower Deck Loader - Functional Requirements
NF S52-726*NF ISO 7797:1994 Cross-country skis. Determination of breaking load and deflection at break with quasistatic load.
NF EN 1533:2010 Wooden floors - Determination of deflection under static load - Test methods
FD L92-611*FD ISO 6968:2006 Aircraft ground equipement - Lower deck loader - Functional requirements
NF P94-117-1:2000 Soils: reconnaissance and tests - Load bearing capacity of platforms - Part 1: module under static loading to the plate (EV2)
NF R12-752:2006 Passenger car tyres - Method for measuring relative wet grip performance - Loaded new tyres.
NF EN 12430:2013 Produits isolants thermiques destinés aux applications du bâtiment - Détermination du comportement sous charge ponctuelle
NF EN ISO 1893:2009 Refractory products - Determination of sag under load - Differential method with temperature rise
NF G35-010:1987 Textile floor coverings. Determination of thickness loss under dynamic loading.
NF EN 60195:2017 Method for measuring the noise produced under load by fixed resistors
NF P16-120:1998 Structural design of buried pipelines under various conditions of loading. Part 1 : general requirements.
NF P08-353:1987 Roofs constructed with components - Bending resistance tests under concentrated load
NF EN 13793:2004 Produits isolants thermiques destinés aux applications du bâtiment - Détermination du comportement sous charge cyclique
NF B53-643*NF EN 1533:2010 Wood flooring - Determination of bending strength under static load - Test methods
P08-353:1987 Roofs made of components. Bending test under concentrated load.
NF EN 14292:2005 Adhesives - Adhesives for wood - Determination of resistance to static load under increased temperature
NF E23-030-6*NF ISO 6336-6:2020 Calculation of load capacity of spur and helical gears - Part 6 : calculation of service life under variable load
NF B40-315*NF EN ISO 1893:2009 Refractory products - Determination of refractoriness under load - Differential method with rising temperature
NF T76-334*NF EN 15336:2007 Adhesives - Determination of the time to rupture of bonded joints under static load
NF G35-010*NF ISO 2094:2018 Textile floor coverings - Determination of thickness loss under dynamic loading
NF ISO 2094:2018 Textile floor coverings - Determination of thickness loss under dynamic loading
NF P75-301:1987 Manufactured building thermal insulators - Plates and panels - Measurement of compressibility at room temperature under constant load
NF ISO 6336-6:2020 Calculation of the load capacity of spur and helical gears - Part 6: calculation of service life under variable load

Korean Agency for Technology and Standards (KATS)

KS F 2444-1990 Testing method for bearing capacity of soil for static load on spread footings
KS F 2238-1999 Doorsets-Diagonal deformation test under static load
KS E ISO 7992-2017(2022) Iron ores－Determination of reduction properties under load
KS F 2238-1999(2019) Doorsets－Diagonal deformation test under static load
KS G ISO 7797-2019 Cross-country skis－Determination of breakingload and deflection at break with quasistatic load
KS G ISO 7797-2004(2019) Cross-country skis－Determination of breakingload and deflection at break with quasistatic load
KS M ISO 17281:2007 Plastics－Determination of fracture toughness (GIC and KIC) at moderately high loading rates(1 m/s)
KS C 4327-2000(2011) 25.8kV automatic load transfer switch for underground line
KS F 2445-2022 Test method for piles under static axial compressive load
KS F 2445-2016(2021) Standard method of testing piles under axial compressive load
KS F 2445-2016 Standard method of testing piles under axial compressive load
KS R 4078-2001 Rear underrun protection for trucks and trailers
KS F 2445-1982 Standard method of testing piles under axial compressive load
KS K ISO 2094:2007 Textile floor coverings－Determination of thickness loss under dynamic loading
KS C 4327-2000 25.8kV automatic load transfer switch for underground line
KS M ISO 23671:2010 Passenger car tyres－Method for measuring relative wet grip performance－Loaded new tyres
KS F 2439-1984 Standard method of testing piles under vertical axial compressive load
KS M ISO 14615-2007(2017) Adhesives－Durability of structural adhesive joints－Exposure to humidity and temperature under load
KS B ISO 6336-6-2010(2020) Calculation of load capacity of spur and helical gears－Part 6：Calculation of service life under variable load
KS M ISO 15109-2007(2022) Adhesives－Determination of the time to rupture of bonded joints under static load
KS M 3045-2023 Testing methods for chemical resistance of plastics under constant tensile load
KS M ISO 15109-2022 Adhesives－Determination of the time to rupture of bonded joints under static load
KS M 3045-2008 Testing methods for chemical resistance of plastics under constant tensile load
KS X ISO/IEC 23004-5-2023 Information technology－Multimedia Middleware－Part 5：Component download
KS X ISO/IEC 23004-5-2008(2018) Information technology－Multimedia Middleware－Part 5：Component download
KS B ISO 6336-6-2020 Calculation of load capacity of spur and helical gears－Part 6：Calculation of service life under variable load
KS M ISO 15109-2007(2017) Adhesives－Determination of the time to rupture of bonded joints under static load
KS M 6785-2009 Testing methods of stress-strain properties at low deformation for vulcanized rubber
KS K ISO 2094-2023 Textile floor coverings — Determination of thickness loss under dynamic loading
KS F 2637-2017 Intrusion resistance test method for doors, windows, shutters－Resistance under dynamic loading
KS F ISO 9087-2004(2014) Determination of nail and screw holding power under axial load application for wood
KS M 3721-2015 Testing methods for strength properties of adhesives in shear by compression loading
KS W 1542-1999(2014) Aircraft－Wide body aircraft lower deck container / pallet loader－Functional requirement
KS X ISO/IEC 23004-5:2008 Information technology-Multimedia Middleware-Part 5:Component download
KS K ISO 2094:2018 Textile floor coverings — Determination of thickness loss under dynamic loading
KS M 3045-2018 Testing methods for chemical resistance of plastics under constant tensile load
KS B ISO 22915-20-2015(2020) Industrial trucks－Verification of stability－Part 20：Additional stability test for trucks operating in the special condition of offset load, offset by utilization

API - American Petroleum Institute

API REPORT 90-63-1993 Capabilities of Swivel Flanges under Combinations of Loading
API REPORT 86-21-1987 Capabilities of API Flanges under Combination of Loading
API REPORT 83-42B-1984 Analysis of Pile Response under Axial Loads
API REPORT 88-21-1990 Capabilities of API Integral Flanges under Combination of Loading
API REPORT 89-21-1989 Temperature Derating of API Flanges under Combination of Loading
API REPORT 89-21-1990 Capabilities of Overbored API Threaded Flanges under Combination of Loading
API REPORT 85-56-1985 Collapse Tests of Short Tubular Columns Subjected to Combined Loads
API BULL 6AF-1989 BULLETIN ON CAPABILITIES OF API FLANGES UNDER COMBINATIONS OF LOAD (FIRST EDITION)
API BULL 6AF1-1991 Bulletin on Temperature Derating of API Flanges under Combination of Loading (First Edition)
API TR 6AF-2008 Technical Report on Capabilities of API Flanges Under Combinations of Load (Third Edition)
API TR 6AF-1995 Technical Report on Capabilities of API Flanges under Combinations of Load (Second Edition)
API TR 6AF1-1998 Technical Report on Temperature Derating on API Flanges under Combination of Loading (Second Edition)

(U.S.) Telecommunications Industries Association

TIA-102.AACB-2002 Project 25 - Over-the-Air Rekeying (OTAR) Opertional Description [Superseded: TIA TSB102.AACB]
TIA SP 3-4652.806-2007 Wireless Features Description: Over-the-Air Parameter Administration To be published as TIA-664.806

GB-REG

REG NASA-LLIS-0261-1994 Lessons Learned - Working Under Suspended Loads

IN-BIS

IS 11311-1985 Technical requirements for underground mining loaders
IS 11167-1985 General requirements for aircraft lower deck container/pallet loaders

Standard Association of Australia （SAA）

AS 62271.110:2019 High-voltage switchgear and controlgear, Part 110: Inductive load switching (IEC 62271-110:2017 (ED 4.0)/COR 1:2017/COR 2:2018, MOD)

Alliance of Telecommunications Industry Solutions （ATIS)

ATIS 0300039-2008 Guideline for Identifying Downloadable Software for Plugin Cards
ATIS 0300039-2011 Guideline for Identifying Downloadable Software for Plug-in Cards
ATIS 0300039-2020 Guideline for Identifying Downloadable Software for Plug-in Cards
ATIS 0800014-2012 Secure Download and Messaging Interoperability Specification (Version 003)
ATIS 0800014-2009 Secure Download and Messaging Interoperability Specification Version 002

KR-KS

KS E ISO 7992-2017 Iron ores－Determination of reduction properties under load
KS X ISO/IEC 23004-5-2008(2023) Information technology－Multimedia Middleware－Part 5：Component download
KS K ISO 2094-2018 Textile floor coverings — Determination of thickness loss under dynamic loading
KS M 3045-2018(2023) Testing methods for chemical resistance of plastics under constant tensile load

Aeronautical Radio Inc.

ARINC 826-2009 SOFTWARE DATA LOADER USING CAN INTERFACE

ATIS - Alliance for Telecommunications Industry Solutions

0300039-2011 Guideline for Identifying Downloadable Software for Plug-in Cards
0300039-2008 Guideline for Identifying Downloadable Software for Plugin Cards
0800014-2008 Secure Download and Messaging Interoperability Specification
0800014-2009 Secure Download and Messaging Interoperability Specification (Version 002)
0800014-2012 Secure Download and Messaging Interoperability Specification (Version 003)

ABS - American Bureau of Shipping

ABS 7-2017 RULES FOR BUILDING AND CLASSING UNDERWATER VEHICLES@ SYSTEMS AND HYPERBARIC FACILITIES 2017
ABS 5 NOTICE 1-2017 RULES FOR BUILDING AND CLASSING STEEL VESSELS UNDER 90 METERS (295 FEET) IN LENGTH 2017
ABS 7 CORR-2017 RULES FOR BUILDING AND CLASSING UNDERWATER VEHICLES@ SYSTEMS AND HYPERBARIC FACILITIES 2017
ABS 5-2017 RULES FOR BUILDING AND CLASSING STEEL VESSELS UNDER 90 METERS (295 FEET) IN LENGTH 2017
ABS 5 NOTICE 2-2017 RULES FOR BUILDING AND CLASSING STEEL VESSELS UNDER 90 METERS (295 FEET) IN LENGTH 2017
ABS 5 CORR-2017 RULES FOR BUILDING AND CLASSING STEEL VESSELS UNDER 90 METERS (295 FEET) IN LENGTH 2017

ITU-T - International Telecommunication Union/ITU Telcommunication Sector

SERIE G SUPP 5 SPANISH-1984 Measurement of the load of telephone circuits under field conditions
SERIES G SUPP 5-1984 Measurement of the load of telephone circuits under field conditions

International Telecommunication Union (ITU)

ITU-T G SUPP 5-1984 Measurement of the load of telephone circuits under field conditions
ITU-T SERIE G SUPP 5 FRENCH-1984 Measurement of the load of telephone circuits under field conditions
ITU-T SERIES G SUPP 5-1984 Measurement of the load of telephone circuits under field conditions
ITU-T SERIE G SUPP 5 SPANISH-1984 Measurement of the load of telephone circuits under field conditions

CU-NC

NC 96-00-11-1989 Fire Protection Standards System. Fuel Load. Methodology for Its Determination
NC 54-343-1986 Construction Materials and Products. Rocks Load-on-Time Test

Lithuanian Standards Office

LST EN 12028-2000 Self-adhesive tapes - Measurement of elongation under static load
LST EN 1569-2000 Surfaces for sports areas - Determination of the behaviour under a rolling load
LST EN 12430-2000/A1-2007 Thermal insulating products for building applications - Determination of behaviour under point load
LST EN 12430-2000 Thermal insulating products for building applications - Determination of behaviour under point load
LST EN 13793-2004 Thermal insulating products for building applications - Determination of behaviour under cyclic loading
LST CLC IEC/TS 60079-43:2021 Explosive atmospheres - Part 43: Equipment in adverse service conditions (IEC/TS 60079-43:2017)
LST EN 1533-2010 Wood flooring - Determination of bending strength under static load - Test methods

Danish Standards Foundation

DS/EN 12028:1997 Self adhesive tapes - Measurement of elongation under static load
DS/EN 1569:1999 Surfaces for sports areas - Determination of the behaviour under a rolling load
DS/EN 12430:2013 Thermal insulating products for building applications - Determination of behaviour under point load
DS/EN 13793:2004 Thermal insulation products for building applications - Determination of behaviour under cyclic loading
DS/EN 1533:2010 Wood flooring - Determination of bending strength under static load - Test methods
DS/ISO/IEC 23004-5:2008 Information technology - Multimedia Middleware - Part 5: Component download
DS/EN 15336:2007 Adhesives - Determination of the time to rupture of bonded joints under static load

GSO

GSO ISO 7797:2016 Cross-country skis -- Determination of breaking load and deflection at break with quasistatic load
OS GSO ISO 7797:2016 Cross-country skis -- Determination of breaking load and deflection at break with quasistatic load
BH GSO ISO 7797:2017 Cross-country skis -- Determination of breaking load and deflection at break with quasistatic load
BH GSO ISO 6968:2017 Aircraft ground equipment -- Lower deck loader -- Functional requirements
BH GSO ISO 29769:2016 Thermal insulating products for building applications -- Determination of behaviour under point load
OS GSO ISO 29769:2013 Thermal insulating products for building applications -- Determination of behaviour under point load
GSO ISO 1893:2015 Refractory products -- Determination of refractoriness under load -- Differential method with rising temperature
GSO ISO 29769:2013 Thermal insulating products for building applications -- Determination of behaviour under point load
OS GSO ISO 6968:2015 Aircraft ground equipment -- Lower deck loader -- Functional requirements
NB/T 11520-2024 Stepping self-moving device for scraper transfer machine in coal mine
OS GSO ISO 16545:2015 Thermal insulating products for building applications -- Determination of behaviour under cyclic loading
BH GSO ISO 15109:2016 Adhesives - Determination of the time to rupture of bonded joints under static load
GSO ISO 16545:2015 Thermal insulating products for building applications -- Determination of behaviour under cyclic loading
BH GSO ISO 16545:2017 Thermal insulating products for building applications -- Determination of behaviour under cyclic loading
OS GSO ISO 6336-6:2009 Calculation of load capacity of spur and helical gears – Part 6: Calculation of service life under variable load
GSO ISO 15109:2013 Adhesives - Determination of the time to rupture of bonded joints under static load
OS GSO 541:1994 textile floor covenings - determination of thickness loss under dynamic loading .

American National Standards Institute （ANSI)

ANSI/TIA-664-806-2007 Wireless Features Description: Over-the-Air Parameter Administration
ANSI H35.4-2017 American National Standard Designation System for Unalloyed Aluminum Download
ANSI/IEEE 1609.3:2010 Standard for Wireless Access in Vehicular Environments (WAVE) - Networking Services
ANSI H35.3-2017 American National Standard Designation System for Aluminum Hardeners Download
ANSI/IEEE 1609.4:2011 Standard for Wireless Access in Vehicular Environments (WAVE) - Multi-Channel Operation

European Committee for Standardization (CEN)

EN 16730:2016 Railway applications - Track - Concrete sleepers and bearers with under sleeper pads

Institute of Electrical and Electronics Engineers (IEEE)

IEEE Std C37.74-2003 Requirements for subsurface, vault, and pad-mounted load-interrupter switchgear and fused load-interrupter switchgear for alternating current systems up to 38 kV
IEEE Std C37.37a-1992 (Supplement to ANSI/IEEE C37.37-1979) IEEE Loading Guide for AC High-Voltage Air Switches Under Emergency Conditions
IEEE Std C37.37a-1992 IEEE Loading Guide for AC High-Voltage Air Switches Under Emergency Conditions
IEEE Std C37.74/INT 1-2004 IEEE Standards Interpretation for IEEE Std C37.74-2003 IEEE Standard Requirements for Subsurface, Vault, and Pad-Mounted Load-Interrupter Switchgear and Fused Load-Interrupter Switchgear for Alternating Current Systems Up to 38 kV

(U.S.) Ford Automotive Standards

FORD FLTM BO 021-3-2001 METHOD FOR DETERMINING FLOW UNDER LOAD OF VARIOUS PLASTIC MATERIALS AT MODERATE TEMPERATURES

PL-PKN

PN-EN 1569-2020-11 E Surfaces for sports areas - Determination of the behaviour under a rolling load
PN C89066-1988 Plasties Determination of temperatur? of deflection under load

Society of Automotive Engineers (SAE)

SAE AS24585B-2003 SPRING, HELICAL, COMPRESSION: FOR LOADS BELOW 20 POUNDS
SAE AS24585B-2007 SPRING, HELICAL, COMPRESSION: FOR LOADS BELOW 20 POUNDS
SAE J1424-2014 Cargo Lamps for Use on Vehicles Under 5443 kg (12 000 lb) GVWR
SAE J1424-2008 Cargo Lamps for Use on Vehicles Under 5443 kg (12 000 lb) GVWR
SAE AS24585D-2021 SPRING, HELICAL, COMPRESSION: FOR LOADS BELOW 20 LBF
SAE AS24585E-2023 SPRING, HELICAL, COMPRESSION: FOR LOADS BELOW 20 LBF
SAE AS24585C-2016 SPRING, HELICAL, COMPRESSION: FOR LOADS BELOW 20 LBF
SAE AS24586-2006 SPRING, HELICAL, EXTENSION: FOR LOADS BELOW 30 POUNDS
SAE AS24586-2001 Spring, Helical, Extension: for Loads Below 30 Pounds FSC 5360

CZ-CSN

CSN 73 6192-1996 Impact load tests for road surfaces and subsurfaces
CSN 72 6030-1976 Refractory products. Determination of refractoriness under load and of creep in compression at high temperature
CSN 77 0862-1987 Adhesive packaging tapes Determination of mechanical properties under statical load
CSN 64 0753-1981 Testing of plastics. Determination of emperature of deflection under load ording to ISO 75
CSN ISO 1893:1994 Refractory products.Determination of refractoriness-under-load(differential-with rising temperature)
CSN 72 6015-1983 Determination of fire resistance under load oí fireclay, silica and graphite bricks
CSN 44 1783-1989 Iron ores, agglomerates and pellets. Reducibilty test under load

SAE - SAE International

SAE AS24585A-2002 SPRING, HELICAL, COMPRESSION: FOR LOADS BELOW 20 POUNDS
SAE AS24586A-2010 SPRING@ HELICAL@ EXTENSION: FOR LOADS BELOW 30 POUNDS
SAE AS24586B-2016 SPRING@ HELICAL@ EXTENSION: FOR LOADS BELOW 30 POUNDS
SAE AS24585-2001 Spring@ Helical@ Compression: for Loads Below 20 Pounds (FSC 5360)

AENOR

UNE-EN 12028:1996 SELF ADHESIVE TAPES. MEASUREMENT OF ELONGATION UNDER STATIC LOAD.
UNE-EN 12430:2013 Thermal insulating products for building applications - Determination of behaviour under point load
UNE-EN 1569:2000 Surfaces for sports areas. Determination of the behaviour under a rolling load.
UNE-EN ISO 13260:2012/A1:2017 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading - Amendment 1 (ISO 13260:2010/Amd 1:2017)
UNE 108162:1986 ARMOURED VEHICLES. COMMON SPECIFICATIONS FOR PEOPLE TRANSPORT VEHICLES UNTIL NINE SEATS
UNE-EN 13793:2008 Thermal insulating products for building applications - Determination of behaviour under cyclic loading
UNE-EN 1533:2010 Wood flooring - Determination of bending strength under static load - Test methods
UNE 22351:1992 LOADERS FOR MASSIVE EXPLOSIVES BY CONTAINERS UNDER PRESSURE. SAFETY RULES.

International Organization for Standardization (ISO)

ISO 17281:2018 Plastics - Determination of fracture toughness (GIC and KIC) at moderately high loading rates (1 m/s)
ISO 17281:2002 Plastics - Determination of fracture toughness (G<(Index)IC> and K<(Index)IC>) at moderately high loading rates (1 m/s)
ISO 2094:1999 Textile floor coverings - Determination of thickness loss under dynamic loading
ISO 2094:1973 Textile floor coverings — Determination of thickness loss under dynamic loading
ISO 23671:2015 Passenger car tyres - Method for measuring relative wet grip performance - Loaded new tyres
ISO 23671:2006 Passenger car tyres - Method for measuring relative wet grip performance - Loaded new tyres
ISO 7992:2022 Iron ores for blast furnace feedstocks — Determination of reduction under load
ISO 75:1987 Plastics and ebonite — Determination of temperature of deflection under load
ISO 2094:1986 Textile floor coverings; Determination of thickness loss under dynamic loading
ISO 29769:2008 Thermal insulating products for building applications - Determination of behaviour under point load
ISO 6336-6:2019 Calculation of load capacity of spur and helical gears — Part 6: Calculation of service life under variable load
ISO/IEC GUIDE 76:2008 Development of service standards - Recommendations for addressing consumer issues
ISO/IEC 23004-5:2008 Information technology - Multimedia Middleware - Part 5: Component download
ISO 15222:2011 Truck and bus tyres - Method for measuring relative wet grip performance - Loaded new tyres

Japanese Industrial Standards Committee (JISC)

JIS A 1521:1996 Doorsets -- Diagonal deformation test under static load
JIS R 2209:1991 Testing method for refractoriness under load of refractory bricks
JIS B 7283:1997 Method of endurance test under cyclic load for spectacle frame
JIS K 7207:1995 Testing method for deflection temperature of rigid plastics under load
JIS K 7108:1987 Testing methods for chemical resistance of plastics under constant tensile load

CH-SNV

SN EN 1569-2020 Surfaces for sports areas - Determination of the behaviour under a rolling load

CEN - European Committee for Standardization

PREN 1569-2018 Surfaces for sports areas - Determination of the behaviour under a rolling load

American Society for Testing and Materials (ASTM)

ASTM D5276-98(2017) Standard Test Method for Drop Test of Loaded Containers by Free Fall
ASTM C655-15 Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe
ASTM D5276-98 Standard Test Method for Drop Test of Loaded Containers by Free Fall
ASTM D5276-98(2004) Standard Test Method for Drop Test of Loaded Containers by Free Fall
ASTM D4577-05(2010) Standard Test Method for Compression Resistance of a Container Under Constant Load
ASTM D1143-81(1987)e1 Standard Test Method for Piles Under Static Axial Compressive Load
ASTM C507-15 Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe
ASTM D4577-19 Standard Test Method for Compression Resistance of a Container Under Constant Load
ASTM C16-81(1996)e1 Standard Test Method for Load Testing Refractory Brick at High Temperatures
ASTM D4577-05 Standard Test Method for Compression Resistance of a Container Under Constant Load
ASTM D4577-19(2023) Standard Test Method for Compression Resistance of a Container Under Constant Load
ASTM D4577-05(2018) Standard Test Method for Compression Resistance of a Container Under Constant Load
ASTM D4577-00 Standard Test Method for Compression Resistance of a Container Under Constant Load
ASTM C1367-19 Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures
ASTM C655M-15 Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Metric)
ASTM F3568-23 Standard Guide for Medical Qualifications for Suborbital Vehicle Passengers
ASTM F1971-12 Standard Test Method for Electrical Resistance of Tires Under Load On the Test Bench
ASTM D3966-90(1995) Standard Test Method for Piles Under Lateral Loads (Withdrawn 2005)
ASTM D5493-93(2003) Standard Test Method for Permittivity of Geotextiles Under Load
ASTM D4577-00(2003)e1 Standard Test Method for Compression Resistance of a Container Under Constant Load
ASTM D4577-00(2003) Standard Test Method for Compression Resistance of a Container Under Constant Load
ASTM C507M-15 Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric)
ASTM F1971-12(2018) Standard Test Method for Electrical Resistance of Tires Under Load On the Test Bench
ASTM C1367-19(2023) Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures
ASTM C1367-06(2012) Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures
ASTM D3689/D3689M-07(2013)e1 Standard Test Methods for Deep Foundations Under Static Axial Tensile Load
ASTM D1143/D1143M-07(2013)e1 Standard Test Methods for Deep Foundations Under Static Axial Compressive Load
ASTM D1143/D1143M-07(2013) Standard Test Methods for Deep Foundations Under Static Axial Compressive Load
ASTM D648-06 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM C1367-06 Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures
ASTM D648-16 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM D1143/D1143M-07e1 Standard Test Methods for Deep Foundations Under Static Axial Compressive Load
ASTM D3689-07 Standard Test Methods for Deep Foundations Under Static Axial Tensile Load
ASTM E1012-99 Standard Practice for Verification of Specimen Alignment Under Tensile Loading
ASTM E997-15(2021) Standard Test Method for Evaluating Glass Breakage Probability Under the Influence of Uniform Static Loads by Proof Load Testing

RU-GOST R

GOST 8847-1985 Knitted fabrics. Methods for determination of breaking characteristics and extensibility under loads less than breaking loads
GOST 4070-2000 Refractory products. Method for determination of refractoriness-under-load
GOST 29167-1991 Concrete. The determination methods of fracture toughness characteristics
GOST EN 12430-2011 Thermal insulating products for building applications. Method for determination of behaviour under point load
GOST R EN 12430-2008 Thermal insulating products for building applications. Method for determination of behaviour under point load

VN-TCVN

TCVN 5099-1990 Hosiery.Test method for the determination of sole in tensile loading
TCVN 7578-6-2007 Calculation of load capacity of spur and helical gears.Part 6: Calculation of service life under variable load

ES-UNE

UNE-EN 1569:2021 Surfaces for sports areas - Determination of the behaviour under a rolling load

SE-SIS

SIS SS 27 11 12-1986 Corrugated metal sheets — Determination of loadbearing capacity at distributed load
SIS SS 27 11 13-1986 Corrugated metal sheets — Determination of loadbearing capacity at concentrated load
SIS SS-ISO 2094:1989 Textile floor coverings — Determination of thickness loss under dynamic loading
SIS 11 23 15-1973 Interrupted creep testing of steel at elevated temperatures (Load and temperature interrupted)
SIS 11 23 15-1966 Interrupted creep testing of steel at elevated temperatures (Load and temperature interrupted)
SIS 83 25 18-1973 Textile floor coverings. Determination of thickness loss under dynamic loading

GOST

GOST R 70419-2022 Transport packaging. Strength analysis under static loads at design stage
GOST R ISO 10764-2021 Footwear. Test methods for slide fasteners. Lateral strength

AGMA - American Gear Manufacturers Association

P229.23-1982 Optimum Design of High Loaded Case Carburized Large Gears
2000FTM10-2000 Bending Fatigue Investigation under Variable Load Conditions on Case Carburized Gears
07FTM13-2007 Influence of Grinding Burn on the Load Carrying Capacity of Parts Under Rolling Stress
ISO 6336-6-A08:2008 Calculation of Load Capacity of Spur and Helical Gears - Part 6: Calculation of Service Life Under Variable Load

American Bureau of Shipping

ABS 148 CORR-2009 GUIDANCE NOTES ON STRENGTH ASSESSMENT OF MEMBRANE-TYPE LNG CONTAINMENT SYSTEMS UNDER SLOSHING LOADS APRIL 2006

FI-SFS

SFS 3229-1976 Plastic (hard rubber). Determination of diffraction temperature under bending load

TR-TSE

TS 3375-1979 TEXTILE FLOOR COVERINGS — DETERMINATIONS OF THICKNESS LOSS UNDER DYNAMIC LOADIN'
TS 2468-1976 PLASTICS AND EBON?TE — DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD

American Gear Manufacturers Association

AGMA 07FTM13-2007 Influence of Grinding Burn on the Load Carrying Capacity of Parts Under Rolling Stress

Canadian Standards Association (CSA)

CAN/CSA-ISO/IEC 23004-5:2008 Information technology — Multimedia Middleware — Part 5: Component download
CSA ISO/IEC 23004-5-08-CAN/CSA:2008 Information technology ?Multimedia Middleware ?Part 5: Component download

BR-ABNT

ABNT MB-248-1972 Inside the asbestos cement casing. Detection of damaging loads under internal pressure
ABNT MB-242-1972 Detection of damage loads under internal pressure in cement asbestos pipelines

United States Navy

NAVY MIL-STD-1322-713-1969 PALLETIZING DOMESTIC UNIT LOAD COUNTER WEIGHTS (UPPER AND LOWER) LD 624589 (IN PLASTIC CONTAINER)

GM Europe

GME4666-2007 Reifenrollger盲usch unter Drehmoment, Au脽enger盲usch Tire Rolling Noise under Load, Exterior Noise English/German; Includes Appendix A; This specification may be applied only for current projects incl. Global Epsilon e (37

GOSTR

GOST R 58902-2020 Thermal insulating building products. Methods for determining properties under cyclic loading
GOST 34283-2017 Vessels and apparatus. Norms and methods of strength calculation under wind loads, seismic influence and other external loads

American Society of Mechanical Engineers (ASME)

ASME STP-NU-083-2017 Blast Testing of Prestressed Concrete under Impulsive Loading

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JESD60A-2004 A Procedure for Measuring P-Channel MOSFET Hot-Carrier- Induced Degradation Under DC Stress

BE-NBN

NBN 212-1970 Steel structure building. Load calculation of welded components under static force

US-RTCA

RTCA DO-117-1963 STANDARD ADJUSTMENT CRITERIA FOR AIRBORNE LOCALIZER AND GLIDE SLOPE RECEIVERS

Underwriters Laboratories (UL)

UL 676 BULLETIN-2017 UL Standard for Safety Underwater Luminaires and Submersible Junction Boxes (COMMENTS DUE: December 17@ 2017)

National Aeronautics and Space Administration (NASA)

NASA-TN-D-212-1959 Axial-load fatigue tests of 2024-T3 and 7075-T6 aluminum-alloy sheet specimens under constant- and variable-amplitude loads

Others: