Rim runout

Rim runout, Total:471 items.

The international standard classification for "Rim runout" includes: Aids for disabled or handicapped persons , Road vehicle tyres , Transmissions, suspensions , Tyres in general , Tyres , Other tyres , Steels profiles , Road vehicle systems .

The Chinese standard classification for "Rim runout" includes: Bicycle , Tyre , Bearing system , Bearing system , Measuring tool and instrument , Profile steel and deformed steel , Length Measurement .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 3487-2005 Rim contours for motor vehicles
GB/T 9769-2005 Rim contour measure
GB/T 10823-1996 Series of solid tyres for pneumatic tyres rims
GB/T 9769-2015 Rim contour measure
GB/T 9769-1988 Rim contour inspection
GB/T 12996-2024 Electrically powered wheelchair
GB/T 3487-1996 Rim contours for motor vehicles
GB/T 10824-2022 Technical specification of solid tyres for pneumatic tyres rims
GB/T 31580-2015 Series of electric bicycle rims
GB/T 23657-2018 Series of cycle rims
GB/T 13202-2007 Series of motorcycle rims
GB/T 13202-1997 Series of motorcycle rims
GB/T 10824-2008 Technical specification of solid tyres for pneumatic tyres rims
GB/T 13202-2015 Series of motorcycle rims
GB/T 23657-2009 Series of cycle rims
GB/T 10824-1996 Solid tyres for pneumatic tyres rims

Group Standards of the People's Republic of China

T/ZSA 55-2018 Technical code for electric autonomous service device
T/CMAX 117.1-2021 Service electric self-propelled wheeled vehicles Part 1: Technical requirements

Professional Standard - Machinery

JB/T 8305.2-1995 Rubber wheel rims

Professional Standard - Railway

TB/T 2456.8-1993 Measuring Scale for Runout of Train Wheel Relative to Wheel Tread

National Metrological Technical Specifications of the People's Republic of China

JJF(机械)1004-2018 Calibration specification for grinding wheel runout instrument
JJF(机械) 1004-2018 Calibration specification for grinding wheel runout instrument

Professional Standard - Light Industry

QB/T 1802-2017 Cycles. Rims
QB 1802-1993 Rims for bicycles

Hebei Provincial Standard of the People's Republic of China

DB/T1300 Y14 25-1988 bicycle rim

Professional Standard - Ferrous Metallurgy

YB/T 5227-2000 Hot rolled section steel for automobile wheel felloe
YB/T 5227-2016 Hot-rolled section steel for wheel rim
YB/T 5227-2005 Hot-rolled section steel for automobile wheel felloe

National Metrological Verification Regulations of the People's Republic of China

JJG 90-1983 Verification Regulation of Gear Tooth Aligument and Concentricity Tester
JJG(铁道) 135-1992 Regulations for verification of vehicle wheel-to-wheel tread run-out measuring device
JJG 88-1983 Verification Regulation of Gear Concentricity Tester

Professional Standard - Automobile

QC/T 717-2004 Run out requirements and measuring methods of automotive wheels
QC/T 581-1999 Automobile rim - Profile inspection template
QC/T 717-2015 Road vehicle -Wheels- Requirements and Measuring methods of radial and lateral run-out

Professional Standard-Ships

CB/T 4218-2013 Steel gangway with roller
CB 971-1981 Steel springboard with rollers

British Standards Institution (BSI)

BS ISO 5775-2:2021 Bicycle tyres and rims — Part 2 : Rims Pneumatiques et
BS AU 50-4.7.1:1991 Tyres and wheels - Rim profiles and dimensions - Moped rims - Specification for moped rims
BS ISO 4000-2:2007 Passenger car tyres and rims. Rims
BS ISO 4000-2:2013 Passenger car tyres and rims. Rims
BS ISO 4250-3:2011 Earth-mover tyres and rims. Rims
BS ISO 4250-3:2020 Earth-mover tyres and rims - Rims
BS ISO 5775-2:2015 Bicycle tyres and rims. Rims
BS ISO 3739-3:2008 Industrial tyres and rims - Rims
BS AU 50-4.1.1a:2001 Tyres and wheels - Rim profiles and dimensions - Car rims - Specification for metric series rims - Sub-section 1.1a: Specification for metric series rims
BS AU 50 Pt.4 SubSec.7.1:1992 Tyres and wheels. Rim profiles and dimensions. Moped rims. Specification for moped rims
BS ISO 4249-3:2004 Motorcycle tyres and rims (code-designated series)-Rims
12/30266744 DC BS ISO 4000-2. Passenger car tyres and rims. Rims
BS 2M 45-1:1986 Aircraft tyres and rims-Specification for new tyres, retreads and rims
BS AU 50-4.3.1a:1998 Tyres and wheels - Rim profiles and dimensions - Off-the-road rims - Specification for narrow and wide base off-the-road vehicle rims
BS ISO 4249-3:2010 Motorcycle tyres and rims (code-designated series). Rims
04/30117550 DC ISO 3739-3. Industrial tyres and rims. Part 3. Rims
BS ISO 4209-2:2020 Truck and bus tyres and rims (metric series) - Rims
20/30397479 DC BS ISO 4000-2. Passenger car tyres and rims - Part 2. Rims
BS ISO 5751-3:2004 Motorcycle tyres and rims (metric series)-Range of approved rim contours
2M 45 Pt.1-1986 Aircraft tyres and rims. Specification for new tyres, retreads and rims
BS AU 50-4.6.3:1991 Tyres and wheels. Rim profiles and dimensions. Motorcycle rims.. Specification for code designated series (diameter codes 4 to 12) rims
BS AU 50-4.5.2:1996 Tyres and wheels - Rim profiles and dimensions - Industrial vehicle rims - Specification for rim profiles and dimensions for metric series pneumatic tyres and solid tyres for pneumatic tyre rims
BS ISO 5751-3:2010 Motorcycle tyres and rims (metric series). Range of approved rim contours
BS AU 50-4.4.1a:1995 Tyres and wheels - Rim profiles and dimensions - Agricultural tractor and machine rims - Specification for ply-rating marked series rims
BS ISO 4209-2:2012 Truck and bus tyres and rims (metric series). Rims
13/30227572 DC BS ISO 5775-2. Bicycle tyres and rims. Part 2. Rims
BS AU 50-4.6.3:1992 Tyres and wheels - Rim profiles and dimensions - Motorcycle rims - Specification for code designated series (diameter codes 4 to 12) rims
09/30206265 DC BS ISO 4250-3. Earth-mover tyres and rims. Part 3. Rims
BS ISO 3739-3:2021 Industrial tyres and rims. Rims
BS ISO 4000-2:2021 Passenger car tyres and rims. Rims
BS ISO 4209-2:2020(2021) Truck and bus tyres and rims (metric series) Part 2 : Rims
24/30486793 DC BS ISO 3739-3 Industrial tyres and rims - Pneumatic tyres (metric series) on 5 degrees tapered or flat base rims with rim diameter codes not exceeding 15 - Part 3: Rims
BS 3M 45-1:1994 Aircraft tyres and rims-Specifications
BS AU 50-4.5.1:1995(1999) Tyres and wheels — Part 4 : Rim profiles and dimensions — Section 5 : Industrial vehicle rims — Subsection 5.1 Specification for rim profiles and dimensions for code - designated series tyres
BS ISO 4251-3:2006 Tyres (ply rating marked series) and rims for agricultural tractors and machines - Rims
BS ISO 4250-3:2006 Earth-mover tyres and rims-Rims
BS ISO 3739-1:2007 Industrial tyres and rims. Pneumatic tyres (metric series) on 5 tapered on flat base rims. Designation, dimensions and marking
BS AU 50 Pt.4 SubSec.3.1:1992 Tyres and wheels. Rim profiles and dimensions. Off-the-road rims. Specification for narrow and wide base off-the-road vehicle rims
BS 4M 45-1:1998 Aircraft tyres and rims - Specifications
BS AU 50 Pt.4 SubSec.6.2:1992 Tyres and wheels. Rim profiles and dimensions. Motorcycle rims. Specification for metric series 100, 90, 80, 70 and 60 rims
BS AU 50-4.5.1:1995 Tyres and wheels - Rim profiles and dimensions - Industrial vehicle rims - Specification for rim profiles and dimensions for code-designated series tyres
BS AU 50 Pt.4 SubSec.6.3:1992 Tyres and wheels. Rim profiles and dimensions. Motorcycle rims. Specification for code designated series (diameter codes 4 to 12) rims
BS 2M 45-2:1986 Aircraft tyres and rims-Methods of test for tyres
09/30202630 DC BS ISO 4249-3. Motorcycle tyres and rims (code-designated series). Part 3. Rims
BS ISO 10499-1:2019 Industrial tyres and rims. Rubber solid tyres (metric series) for pneumatic tyre rims - Designation, dimensions and marking
BS 3M 45-2:1998 Aircraft tyres and rims. Test methods for tyres
09/30202639 DC BS ISO 5751-3. Motorcycle tyres and rims (metric series). Part 3. Range of approved rim contours
BS ISO 4000-1:2013 Passenger car tyres and rims. Tyres (metric series)
BS ISO 4000-1:2015 Passenger car tyres and rims. Tyres (metric series)
BS ISO 3739-2:2021 Industrial tyres and rims. Pneumatic tyres (metric series) on 5 degrees tapered or flat base rims. Load ratings
09/30180865 DC BS ISO 4209-2. Truck and bus tyres and rims (metric series). Part 2. Rims
BS ISO 4000-1:2007 Passenger car tyres and rims-Tyres (metric series)
BS ISO 4000-1:2021 Passenger car tyres and rims. Tyres (metric series)
BS ISO 4000-1:2010 Passenger car tyres and rims-Tyres (metric series)
BS AU 50 Pt.4 SubSec.4.1:1992 Tyres and wheels. Rim profiles and dimensions. Agricultural tractor and machine rims. Specification for existing (inch) series rims
BS ISO 4000-1:2024 Passenger car tyres and rims - Tyres (metric series)
BS ISO 4250-1:2023 Earth-mover tyres and rims. Tyre designation and dimensions
BS ISO 5775-1:2014 Bicycle tyres and rims. Tyre designations and dimensions
BS ISO 7867-1:2005 Tyres and rims (metric series) for agricultural tractors and machines - Tyre designation, dimensions and marking, and tyre/rim coordination
BS ISO 5775-1:2023 Bicycle tyres and rims - Tyre designations and dimensions
24/30486790 DC BS ISO 3739-2 Industrial tyres and rims - Pneumatic tyres (metric series) on 5 degrees tapered or flat base rims with rim diameter codes not exceeding 15 - Part 2: Load ratings
BS ISO 3739-1:2022 Industrial tyres and rims. Pneumatic tyres (metric series) on 5 degrees tapered or flat base rims. Designation, dimensions and marking
BS 71:1917 Report on BS solid tyre rim diameters for automobiles
BS ISO 4251-1:2005+A1:2012 Tyres (ply rating marked series) and rims for agricultural tractors and machines. Tyre designation and dimensions, and approved rim contours
BS 71:1930 Report on BS solid tyre rim diameters for automobiles
2M 45 Pt.2-1986 Aircraft tyres and rims. Methods of test for tyres

South African Bureau of Standard

SANS 1550-10:2006 Motor vehicle tyres and rims - Dimensions and loads Part 10: Rim contours
SABS 1550-10-2002 Motor vehicle tyres and rims - Dimensions and loads Part 10:Rim contours
SANS 1550-2:2006 Motor vehicle tyres and rims - Dimensions and loads Part 2: Passenger car tyres
SANS 1550-3:2006 Motor vehicle tyres and rims - Dimensions and loads Part 3: Commercial vehicle tyres
SANS 1550-6:2005 Motor vehicle tyres and rims - Dimensions and loads Part 6: Agricultural vehicle tyres
SANS 1550-7:2005 Motor vehicle tyres and rims - Dimensions and loads Part 7: Industrial vehicle tyres
SANS 1550-1:2005 Motor vehicle tyres and rims - Dimensions and loads Part 1: General
SANS 1550-5:2006 Motor vehicle tyres and rims - Dimensions and loads Part 5: Off-the-road vehicle tyres
SANS 3894:2007 Road vehicles - Wheels/rims for commercial vehicles - Test methods
SANS 1550-4:2005 Motor vehicle tyres and rims - Dimensions and loads Part 4: Motorcycle and scooter tyres

Indonesia Standards

SNI 4658-2015 Class L motor vehicle rims

German Institute for Standardization

DIN 7843:1991 Profile gauges for semi-drop centre rims (SDC-rims) to DIN 7826
DIN 7816-3:1994-07 Rims for motorcycles; part 3: 5° tapered drop centre rims, rim profile 2.50 A and 2.50 C
DIN 7841:1987 Profile gauges for rims to DIN 7825
DIN 7840:1979 Profile gauges for rims to DIN 7824
DIN 78001:1994-07 Rims; control rings for the adjustment of rim circumference gauges
DIN 7829:2008-06 Rims and wheels - Marking
DIN 7848-3:1989-09 Rims for earth-moving machinery and special vehicles; drop centre rims
DIN 7821:1982-03 Rims for handcarts
DIN 7829 E:2006-06 Draft Document - Rims and wheels - Marking
DIN 7829 E:2006 Draft Document - Rims and wheels - Marking
DIN 7818:1982-03 Rims for motor vehicles, trailers and agricultural vehicles; flange C, D E and F; rim diameter code 14 to 20
DIN 7781:1979 Valves for automotive tyres; rim valves with metal base
DIN 7825:1983-08 Rims for industrial trucks
DIN 7852:2022 Rubber solid tyres for pneumatic tyre rims
DIN 7852:2022-10 Rubber solid tyres for pneumatic tyre rims
DIN 7824-1:1990 Rims for motor vehicles and trailers; rims with flange B without bead retaining contour
DIN 7848-3:1989 Rims for earth-moving machinery and special vehicles; drop centre rims
DIN 7817-1:1990 Rims for motor vehicles and trailers; rims with flange J, JK and K without bead retaining contour
DIN 7842:1982-03 Profile gauges for rims to DIN 7821
DIN 7841:1987-05 Profile gauges for rims to DIN 7825
DIN 7852 E:2022-02 Rubber solid tyres for pneumatic tyre rims
DIN 7802:1983 Motorcycle tire rim diameter marking
DIN 7816-1:1994-07 Rims for motorcycles; part 1: drop centre rims with cylindrical bead seat
DIN 7817-3:1979-03 Rims for motor vehicles and trailers, hump special types
DIN 7840:1979-02 Profile gauges for rims to DIN 7824
DIN 7815-1:1985-09 Straight-side-rims for bicycles
DIN 7852:2022-01 Draft Document - Rubber solid tyres for pneumatic tyre rims
DIN 7820:1996-05 5° tapered rims for trucks, buses and trailers - Rim diameter code 15, 20 and 24
DIN 7852 E:2022 Draft Document - Rubber solid tyres for pneumatic tyre rims
DIN 7844:1984-09 Rim profile gauges for rims to DIN 7827
DIN 7830:1983-01 Profile gauges for rims to DIN 7816
DIN 7826:1983-10 Rims for motor vehicles and trailers; semi drop center type; rim diameter 16, 20 and 24

SE-SIS

SIS SS-ISO 4000-2:1989 Passenger car tyres and rims — Part 2: Rims
SIS SS 3379-1979 Wheels/rims — Terminology
SIS SMS 366-1947 bike. wheel. rim
SIS SMS 2076-1973 Chain wheels. European type Wheel rim pro filé and tooth gap form
SIS SMS 2082-1973 Chain wheels. American type Wheel rim profile and tooth gap form

Association Francaise de Normalisation

NF H96-701-3*NF ISO 3739-3:2021 Industrial tyres and rims - Part 3 : rims
NF R12-743-2:2014 Passenger car tyres and rims - Part 2 : rims
NF R12-743-2*NF ISO 4000-2:2021 Passenger car tyres and rims - Part 2: Rims
NF R22-730-2:2016 Bicycle tyres and rims - Part 2 : rims
NF ISO 5775-2:2021 Pneumatiques et jantes pour cycles - Partie 2 : jantes
NF E59-002-3:2020 Earth-mover tyres and rims - Part 3 : rims
NF E59-002-3:2012 Earth-mover tyres and rims - Part 3 : rims.
NF R22-730-2*NF ISO 5775-2:2021 Bicycle tyres and rims - Part 2 : rims
NF ISO 4000-2:2021 Tires and rims for passenger cars - Part 2: Rims
NF R12-792-2:1989 Truck and bus tyres and rims (metric series). Part 2 : rims.
NF H96-701-3:2008 Industrial tyres and rims - Part 3 : rims.
NF ISO 3739-3:2021 Industrial tires and rims for handling equipment - Part 3: rims
NF R22-731-3*NF ISO 4249-3:2011 Motorcycle tyres and rims (code-designated series) - Part 3 : rims.
NF ISO 4209-2:2020 Tyres and rims (millimetre series) for trucks and buses - Part 2: Rims
NF R22-731-3:2005 Motorcycle tyres and rims (code-designated series) - Part 3 : rims.
NF R22-732-3:2005 Motorcycle tyres and rims (metric series) - Part 3 : range of approved rim contours.
NF R22-732-3*NF ISO 5751-3:2011 Motorcycle tyres and rims (metric series) - Part 3 : range of approved rim contours
NF ISO 5751-3:2011 Tires and rims for motorcycles (millimeter series) - Part 3: range of approved rim profiles
NF R12-791-2:1989 Passenger car tyres and rims. Rims.
NF R12-792-2*NF ISO 4209-2:2020 Truck and bus tyres and rims (metric series) - Part 2 : rims
NF R12-792-2:2007 Truck and bus tyres and rims (metric series) - Part 2 : rims.
NF R12-792-2:2013 Truck and bus tyres and rims (metric series) - Part 2: rims
NF ISO 4249-3:2011 Motorcycle tyres and rims (series with dimensions designated by codes) - Part 3: Rims
NF ISO 29802:2017 All-terrain tires and rims - Tires marked with a symbol for 5-degree rims - Designation, dimensions, marking and load capacities
NF R32-702:1980 Road vehicles. Cycle rims for tubular tyres.
NF U12-004-3:2006 Tyres (ply rating marked series) and rims for agricultural tractors and machines - Part 3 : rims.
NF T40-241-1:2013 Aircraft tyres and rims - Part 1: specifications
NF H96-702-1*NF ISO 10499-1:2019 Industrial tyres and rims - Rubber solid tyres (metric series) for pneumatic tyre rims - Part 1 : designation, dimensions and marking
NF R22-732:1987 Motorcycle tyres and rims (metric series). Part 1 : tyres. All series.

International Organization for Standardization (ISO)

ISO 4000-2:1994 Passenger car tyres and rims - Part 2: Rims
ISO 3739-3:2021 Industrial tyres and rims — Part 3: Rims
ISO 4000-2:2007 Pneumatiques et jantes pour voitures particulières - Partie 2: Jantes (Cinquième édition)
ISO 5775-2:1989 Bicycle tyres and rims; part 2: rims
ISO 4250-3:2020 Earth-mover tyres and rims — Part 3: Rims
ISO 4000-2:2021 Passenger car tyres and rims - Part 2: Rims
ISO 4000-2:1987 Passenger car tyres and rims; Part 2 : Rims
ISO 5775-2:2015 Bicycle tyres and rims - Part 2: Rims
ISO 4000-2:2013 Passenger car tyres and rims.Part 2: Rims
ISO 4000-2:2001 Passenger car tyres and rims - Part 2: Rims
ISO 5775-2:1996 Bicycle tyres and rims - Part 2: Rims
ISO 5775-2:2021 Bicycle tyres and rims - Part 2: Rims
ISO 4250-3:1997 Earth-mover tyres and rims - Part 3: Rims
ISO 4250-3:2011 Earth-mover tyres and rims - Part 3: Rims
ISO 3739-3:1995 Industrial tyres and rims - Part 3: Rims
ISO 4250-3:2006 Earth-mover tyres and rims - Part 3: Rims
ISO 3739-3:2008 Industrial tyres and rims - Part 3: Rims
ISO 4250-3:1987 Narrow and wide base off-road tyres and rims; Part 3 : Rims
ISO 5775-2:1996/Amd 1:2001 Bicycle tyres and rims - Part 2: Rims; Amendment 1
ISO 5995-2:1984 Moped tyres and rims — Part 2: Rims
ISO 5995-2:1988 Moped tyres and rims; part 2: rims
ISO 4000-2:2001/DAmd 1 Passenger car tyres and rims — Part 2: Rims — Amendment 1
ISO 4249-3:1986 Motorcycle tyres and rims (Code-designated series) — Part 3: Rims
ISO/CD 3739-3:2024 Industrial tyres and rims
ISO 4249-3:2010 Motorcycle tyres and rims (code-designated series) - Part 3: Rims
ISO 4249-3:2004 Motorcycle tyres and rims (code-designated series) - Part 3: Rims
ISO 5751-3:2004 Motorcycle tyres and rims (metric series) - Part 3: Range of approved rim contours
ISO 4249-3:1990 Motorcycle tyres and rims (code-designated series); part 3: rims
ISO 4249-3:1997 Motorcycle tyres and rims (code-designated series) - Part 3: Rims
ISO 5751-3:2010 Motorcycle tyres and rims (metric series) - Part 3: Range of approved rim contours
ISO 5751-3:1999 Motorcycle tyres and rims (metric series) - Part 3: Range of approved rim contours
ISO 5995-1:1982 Moped tyres and rims; Part 1 : Tyres
ISO 3739-1:2007 Industrial tyres and rims - Part 1: Pneumatic tyres (metric series) on 5° tapered or flat base rims - Designation, dimensions and marking
ISO 4209-2:2012 Truck and bus tyres and rims (metric series) - Part 2: Rims
ISO 4209-2:2001 Truck and bus tyres and rims (metric series) - Part 2: Rims
ISO 4249-3:1997/Amd 1:2001 Motorcycle tyres and rims (code-designated series) - Part 3: Rims; Amendment 1
ISO 4251-3:1985 Tyres and rims (existing series) for agricultural tractors and machines — Part 3: Rims
ISO 4209-2:1987 Truck and bus tyres and rims (metric series); Part 2 : Rims
ISO 5751-3:1983 Motorcycle tyres and rims (metric series) — Part 3: Rims for tyres of series 80, 90 and 100
ISO 5751-3:1988 Motorcycle tyres and rims (metric series); part 3: rims for tyres of series 100, 90, 80, 70 and 60
ISO 4209-2 DAM 1:1992 Truck and bus tyres and rims (metric series); part 2: rims; amendment 1
ISO 4251-3:1980 Tyres and rims (Existing series) for agricultural tractors and machines — Part 3: Rims
ISO 13442:2004 Tyres and rims for construction machines
ISO 5751-3:1994 Motorcycle tyres and rims (metric series) - Part 3: Range of approved rim contours
ISO 4209-2:1993 Truck and bus tyres and rims (metric series); part 2: rims
ISO 4250-1:1994 Earth-mover tyres and rims - Part 1: Tyre designation and dimensions
ISO 4251-3:1994 Tyres (ply rating and marked series) and rims for agricultural tractors and machines - Part 3: Rims
ISO 10499:1991 Industrial tyres and rims; solid tyres (metric series) for pneumatic tyre rims; designation, dimensions and marking
ISO 6054-2:1990 Motorcycle tyres and rims (code-designated series); diameter codes 4 to 12; part 2: rims
ISO 10499-1:1991 Industrial tyres and rims - Solid tyres (metric series) for pneumatic tyre rims - Part 1: Designation, dimensions and marking
ISO 4251-3:2006 Tyres (ply rating marked series) and rims for agricultural tractors and machines - Part 3: Rims
ISO 6054-2:1986 Motorcycle tyres and rims (diameter codes 4 to 12) — Scooter type — Part 2: Rims
ISO 3894:1995 Commercial vehicles - Wheels/rims - Test methods
ISO 10499-2:1998 Industrial tyres and rims - Rubber solid tyres (metric series) for pneumatic tyre rims - Part 2: Load ratings
ISO 3894:2023 Road vehicles — Wheels/rims for commercial vehicles — Test methods
ISO 4251-3:1980/Amd 1:1982 Tyres and rims (Existing series) for agricultural tractors and machines — Part 3: Rims — Amendment 1
ISO 3739-2:1992 Industrial tyres and rims; part 2: pneumatic tyres (metric series) on 5° tapered or flat base rims; load ratings
ISO 3739-2:2021 Industrial tyres and rims - Part 2: Pneumatic tyres (metric series) on 5 degrees tapered or flat base rims - Load ratings
ISO 18807:2019 Tyres and rims for logging and forestry service
ISO 10499-1:2019 Industrial tyres and rims — Rubber solid tyres (metric series) for pneumatic tyre rims — Part 1: Designation, dimensions and marking
ISO 3324-1:2013 Aircraft tyres and rims - Part 1: Specifications
ISO 3324-1:1997 Aircraft tyres and rims - Part 1: Specifications
ISO 5751-3:1999/Amd 1:2002 Motorcycle tyres and rims (metric series) - Part 3: Range of approved rim contours; Amendment 1
ISO 4250-2:2017 Earth-mover tyres and rims — Part 2: Loads and inflation pressures
ISO 3324-1:1976 Title missing - Legacy paper document
ISO 3324-1:1993 Aircraft tyres and rims — Part 1: Specifications

Spanish Association for Standardization (UNE)

UNE 69018:2002 Tyres, rims and valves. Rims. Generalities.
UNE 69023:1991 TYRES, RIMS AND VALVES. TYRES FOR PASSENGER CARS. RECOMMENDED AND PERMITTED RIMS.
UNE 69044:2007 Tyres, rims and valves. Tyres for commercial vehicles. Dimensional characteristics and permissible rims
UNE 69026-3:1992 TYRES, RIMS AND VALVES. DROP CENTER RIMS FOR PASSENGER CARS AND THEIR TRAILERS. PARTE 3: SPECIAL RIMS.
UNE 69033:2008 Tyres, rims and valves. Rims for commercial vehicles and their trailers. General characteristics
UNE 69033:1994 TYRES, RIMS AND VALVES. RIMS FOR COMMERCIAL VEHICLES AND THEIR TRAILERS. GENERAL CHARACTERISTICS.
UNE 69026:2007 Tyres, rims and valves. Drop center rims for passenger cars and their trailers.
UNE 69026-1:1992 TYRES RIMS AND VALVES. DROP CENTRE RIMS FOR PASSENGER CARS AND THEIR TRAILERS. PART 1: BASIC CONTOUR DIMENSIONS.
AENOR UNE 25020:1950 PROFILE OF THE WHEEL RIMS BELT AND DETAIL OF THE CUT
UNE 69001:2001 Tyres, rims and valves. Terminology and definitions.
UNE 69016:1991 TYRES, RIMS AND VALVES. PASSENGER CAR TYRES. GENERALITIES
UNE 69017:1991 TYRES, RIMS AND VALVES. TYRES FOR COMMERCIAL VEHICLES. GENERALITIES
AENOR UNE 69051:2017 Tires, rims and valves. Tire use cycle. Second-hand tires.
UNE 69051:2017 Tyres, rims and valves. Tyre use cycle. Second-hand tyres
UNE 69003:2000 Tyres, rims and valves. Tyres for passenger cars. Safety recommendations.
UNE 69005:2002 Tyres, rims and valves. Tyres for commercial vehicles. Safety recommendations.
UNE 69026-2:1992 TYRES, RIMS AND VALVES. DROP CENTER RIMS FOR PASSENGER CARS AND THEIR TRAILERS. PART 2: CONTOUR FOR BEAD RETENTION.

Korean Agency for Technology and Standards (KATS)

KS M ISO 4250-3-2012(2017) Earth-mover tyres and rims－Part 3：Rims
KS M ISO 5775-2:2010 Bicycle tyres and rims － Part 2: Rims
KS M ISO 4250-3-2023 Earth-mover tyres and rims — Part 3: Rims
KS M ISO 4000-2:2017 Passenger car tyres and rims － Part 2: Rims
KS M ISO 3739-3-2012(2017) Industrial tyres and rims－Part 3：Rims
KS M ISO 3739-3-2022 Industrial tyres and rims Part 3: Rims
KS M ISO 4000-2-2017 Passenger car tyres and rims － Part 2: Rims
KS M ISO 5775-2-2021 Bicycle tyres and rims — Part 2: Rims
KS M ISO 3739-3:2012 Industrial tyres and rims － Part 3: Rims
KS M ISO 4250-3-2012(2022) Earth-mover tyres and rims－Part 3：Rims
KS M ISO 5775-2:2021 Bicycle tyres and rims — Part 2: Rims
KS M ISO 4000-2-2022 Passenger car tyres and rims Part 2: Rims
KS M ISO 4000-2:2007 Passenger car tyres and rims － Part 2: Rims
KS B 7122-2001 Contours of rims for agricultural machines and implements
KS M ISO 4250-3:2012 Earth-mover tyres and rims － Part 3: Rims
KS B 7122-1974 Contours of rims for agricultural machines and implements
KS M ISO 5995:2007 Moped tyres and rims
KS M ISO 4249-3-2015(2021) Motorcycle tyres and rims(Code-designated series)－Part 3：Rims
KS R 4014-2019 Contours of Rims for Automobiles
KS R 4014-1986 Contours of Rims for Automobiles
KS R 4014-1991 Contours of Rims for Automobiles
KS M ISO 4209-2-2002(2017) Truck and bus tyres and rims(metric series) － Part 2: Rims
KS M ISO 4209-2-2022 Truck and bus tyres and rims(metric series) Part 2: Rims
KS M ISO 4249-3:2010 Motorcycle tyres and rims(Code-designated series)-Part 3:Rims
KS M ISO 4249-3:2015 Motorcycle tyres and rims(Code-designated series) － Part 3: Rims
KS M ISO 4249-3-2021 Motorcycle tyres and rims(Code-designated series) － Part 3: Rims
KS R ISO 4029-2-2007 Truck and bus tyres and rims (metric series) - Part 2: Rims
KS R 8025-1998(2013) Rims for bicycles
KS R 4012-1991(2011) RIMS FOR MOTORCYCLES
KS R ISO 5751-3:2010 Motorcycle tyres and rims(metric series)-Part 3:Range of approved rim contours
KS R 8025-1988 Rims for bicycles
KS R 8025-1993 Rims for bicycles
KS M ISO 13442-2010(2021) Tyres and rims for construction machines
KS M ISO 5995-2015 Moped tyres and rims
KS M ISO 4209-2:2002 Truck and bus tyres and rims(metric series) － Part 2: Rims
KS M ISO 13442:2010 Tyres and rims for construction machines
KS R 0095-2003 WHEELS/RIMS-CLASSIFICATION, DESIGNATION AND MARKING
KS M ISO 6054-2:2010 Motorcycle tyres and rims (code-designated series) － Diameter codes 4 to 12 － Part 2: Rims
KS R 0095-1991(2001) WHEELS/RIMS-CLASSIFICATION, DESIGNATION AND MARKING
KS M ISO 10499-2-2007(2017) Industrial tyres and rims－Rubber solid tyres(metric series)for pneumatic tyre rims－Part 2：Load ratings
KS M ISO 5995-2007(2015) Moped tyres and rims
KS B 7122-2016(2021) Contours of rims for agricultural machines and implements
KS M ISO 6054-2:2021 Motorcycle tyres and rims(Code-designated series) —Diameter codes 4 to 12 — Part 2: Rims
KS M ISO 10499-2-2022 Industrial tyres and rims－Rubber solid tyres(metric series)for pneumatic tyre rims－Part 2：Load ratings
KS M ISO 18807-2024 Tyres and rims for logging and forestry service
KS B 7122-2021 Contours of rims for agricultural machines and implements
KS M ISO 10499-2-2007(2022) Industrial tyres and rims － Rubber solid tyres(metric series)for pneumatic tyre rims － Part 2: Load ratings
KS M ISO 10499-1-2007(2017) Industrial tyres and rims－Solid tyres(metric series) for pneumatic tyre rims－Part 1：Designation, dimensions and marking
KS M ISO 6054-2-2021 Motorcycle tyres and rims(Code-designated series) —Diameter codes 4 to 12 — Part 2: Rims
KS B 7122-2016 Contours of rims for agricultural machines and implements
KS M ISO 3739-2-2007(2017) Industrial tyres and rims－Part 2：Pneumatic tyres(metric series) on 5° tapered or flat base rims－Load ratings
KS M ISO 10499-1-2022 Industrial tyres and rims Rubber solid tyres(metric series) for pneumatic tyre rims Part 1: Designation, dimensions and marking
KS M ISO 10499-1:2007 Industrial tyres and rims － Solid tyres(metric series) for pneumatic tyre rims － Part 1: Designation, dimensions and marking
KS M ISO 4251-3-2016(2021) Tyres(ply rating marked series) and rims for agricultural tractors and machines － Part 3: Rims
KS M ISO 4251-3-2021 Tyres(ply rating marked series) and rims for agricultural tractors and machines－Part 3：Rims
KS M ISO 10499-2:2007 Industrial tyres and rims － Rubber solid tyres(metric series)for pneumatic tyre rims － Part 2: Load ratings
KS W ISO 3324-1-2017 Aircraft tyres and rims － Part 1: Specifications
KS W 1537-1999(2009) Aircraft tyres and rims － Part 1: Specification
KS W ISO 3324-1:2002 Aircraft tyres and rims － Part 1: Specifications
KS M ISO 4251-3:2007 Tyres(ply rating marked series) and rims for agricultural tractors and machines-Part 3:Rims
KS M ISO 4251-3-2016 Tyres(ply rating marked series) and rims for agricultural tractors and machines － Part 3: Rims
KS M ISO 3739-2:2007 Industrial tyres and rims － Part 2: Pneumatic tyres(metric series) on 5° tapered or flat base rims － Load ratings
KS M ISO 7867-1:2021 Metric series for agricultural, forestry machines and construction tyres — Part 1: Tyre designation, dimensions and marking, and tyre/rim coordination
KS W ISO 3324-1-2017(2022) Aircraft tyres and rims－Part 1：Specifications
KS W ISO 3324-1:2017 Aircraft tyres and rims － Part 1: Specifications
KS M ISO 4251-3:2016 Tyres(ply rating marked series) and rims for agricultural tractors and machines － Part 3: Rims

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 4000-2:2023 Passenger car tyres and rims — Part 2: Rims
BH GSO ISO 4209-2:2016 Truck and bus tyres and rims (metric series) -- Part 2: Rims
BH GSO ISO 4249-3:2017 Motorcycle tyres and rims (code-designated series) - Part 3: Rims
BH GSO ISO 6054-2:2016 -Motorcycle tyres and rims (code-designated series) Diameter codes 4 to 12-- Part 2: Rims
BH GSO ISO 10499-1:2023 Industrial tyres and rims — Rubber solid tyres (metric series) for pneumatic tyre rims — Part 1: Designation, dimensions and marking

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 5775-2:2015 Bicycle tyres and rims -- Part 2: Rims
OS GSO ISO 3739-3:2010 Industrial tyres and rims -- Part 3: Rims
OS GSO ISO 4250-3:2013 Earth-mover tyres and rims -- Part 3: Rims
OS GSO ISO 4209-2:2013 Truck and bus tyres and rims (metric series) -- Part 2: Rims
OS GSO ISO 4249-3:2016 Motorcycle tyres and rims (code-designated series) - Part 3: Rims
OS GSO ISO 13442:2014 Tyres and rims for construction machines
OS GSO ISO 5751-3:2008 Motorcycle tyres and rims (metric series) — Part 3: Range of approved rim contours
OS GSO ISO 10499-2:2015 Industrial tyres and rims -- Rubber solid tyres (metric series) for pneumatic tyre rims -- Part 2: Load ratings
OS GSO ISO 6054-2:2013 -Motorcycle tyres and rims (code-designated series) Diameter codes 4 to 12-- Part 2: Rims

GCC Standardization Organization

GSO ISO 4000-2:2023 Passenger car tyres and rims — Part 2: Rims
BH GSO ISO 4250-3:2024 Earth-mover tyres and rims — Part 3: Rims
GSO ISO 4249-3:2016 Motorcycle tyres and rims (code-designated series) - Part 3: Rims
BH GSO ISO 5751-3:2024 Motorcycle tyres and rims (metric series) — Part 3: Range of approved rim contours
GSO ISO 5751-3:2008 Motorcycle tyres and rims (metric series) — Part 3: Range of approved rim contours
GSO ISO 10499-1:2022 Industrial tyres and rims — Rubber solid tyres (metric series) for pneumatic tyre rims — Part 1: Designation, dimensions and marking

Gosstandart of Russia

GOST R ISO 5775-2-2019 Bicycle tyres and rims. Part 2. Rims
GOST R ISO 4000-2-2005 Passenger car tyres and rims. Part 2. Rims

Bureau of Indian Standards

IS/ISO 4250-3-2020 Earth mover tyres and rims- Part 3: Rims
IS 10694-3-2009 Automotive Vehicles - Rims - General Requirements-3 Commercial Vehicle Rims
IS 16192-1-2014 Automotive Vehicles - Wheel Rims for Two nad Three Wheeled Vehicles part 1 Light Alloy Wheel Rims - Methods Rims - Methods of Tests and Requirements
IS 10694-8-2009 Automotive Vehicles - Rims - General Requirements-8 Earthmoving Machine Rims
IS 16192-3-2018 Automotive Vehicles —— Wheel Rims for Two and Three Wheeled Vehicles Part 3 Spoke Wheel Rims —— Method of Tests and Requirements
IS 10694-7-1983 General Requirements for Rims for Automotive Vehicles - Part 7 : Industrial Truck Rims
IS 16192-2-2014 Automotive Vehicles - Wheel Rims for Two and Three Wheeled Vehicles Part 2 Sheets Metal Wheel Rims - Methods of Tests and Requirements
IS 10694-6-2009 Automotive Vehicles - Rims - General Requirements
IS 10992-1-2003 Aircraft Tyres and Rims - Part 1 : Specifications
IS 10694-4-1983 General Requirements for Rims for Automotive Vehicles - Part 4 : Scooter and Scooter Derivative Rims

Swedish Institute for Standards

SS-ISO 4000-2:2025 Passenger car tyres and rims — Part 2: Rims (ISO 4000-2:2021, IDT)
SS-ISO 4000-2:2007 Passenger car tyres and rims - Part 2: Rims (ISO 4000-2:2007, IDT)
SS-ISO 3739-3:2008 Industrial tyres and rims - Part 3: Rims (ISO 3739-3:2008, IDT)
SS-ISO 4000-2:2014 Passenger car tyres and rims - Part 2: Rims (ISO 4000-2:2013, IDT)
SS-ISO 4250-3:2021 Earth-mover tyres and rims - Part 3: Rims (ISO 4250-3:2020, IDT)
SS-ISO 4209-2:2021 Truck and bus tyres and rims (metric series) - Part 2: Rims (ISO 4209-2:2020, IDT)

VN-TCVN

TCVN 3848-2-2007 Bicycle tyres and rims.Part 2: Rims
TCVN 7057-3-2008 Motorcycle tyres and rims (code-designated series).Part 3: Rims

AT-ON

ONORM V 5027-1986 5° tapered rims for motor vehicles and trailers; rim-diameters 15,17, 20, 22 and 24
ONORM V 5026-1986 15° tapered rims for trucks, buses and trailers; drop centre rims
ONORM V 5035 Teil.7-1991 Industrial tyres; tyres of 70 and 75 series and low section sizes, radial on 15° tapered drop-centre rims and matching rims
ONORM V 5028-1987 Rims for agricultural vehicles and trailers
ONORM V 5031 Teil.8-1988 Tyres for agricultural machinery and implements; rims for implement tyres
ONORM V 5033 Teil.3-1989 Tyres for motor-cycles; tyres, rims and valves for scooters
ONORM V 5032 Teil.3-1990 Tyres for commercial vehicles; tyres on 15° Drop-Centre rims
ONORM V 5033 Teil.4-1989 Tyres for motor-cycles; tyres, rims and valves for motor-cycles

IT-UNI

UNI 5374-1964 Railway rolling stock. Unfinished treads for wheels with inserted treads.
UNI 4835-1961 crane. Machined rims for turning wheels
UNI 5375-1964 Railway rolling stock. Profiles of the internal surface of finished treads for wheels with inserted treads.
UNI 5376-1964 Railway rolling stock. Profiles of the external surface of finished treads for wheels with inserted treads.
UNI 4832-1961 crane. Wheels with flanged rims, wheels with rolling bearings, wheels with ring gears
UNI 4831-1961 crane. Wheels with flanged rims, wheels with rolling bearings, wheels without ring gears
UNI 4828-1961 crane. Wheels with flanged rims, wheels with plain bearings, wheels with ring gears
UNI 5373-1964 Railway rolling stock. Machined rims for wheels with mounted rims. Principal nominal sizes.
UNI 3332-1961 Urban tramcar motor-coaches. Wheel treads.
UNI 5379-1964 Railway rolling stock. Profiles of wheel rim finished rough-tourning for wheels with separate tyres.

YU-JUS

JUS M.N1.055-1982 Rims for moped tyres, motocycle tyresandmotocycles trailers tyres

CZ-CSN

CSN 30 3707-1987 Wheels for tyres. Terms and definitions. Rim types and rim codes

CH-SNV

VSM 23735-1974 Tires and rims. 15° radial tires. Sloped bottom rims for trucks
SN 113 001/1-1980 Maintenance of Physical AssetsTerminology: Terms and Definitions
SNV 95876-1950 Tires and rims. Air pressure and load. 15° radial tires. Sloped bottom rims for trucks
VSM 10326-1929 Tires and rims. Air pressure and load. Radial tires on 15° inclined bottom rims for trucks
SN 057 650-1989 Non-flammable medical gas pipeline systems
VSM 18670.3-1964 Tires and rims. Air pressure and load. Wide tires without hoses on 15° inclined bottom rims for trucks
SN 670 370-1985 Verzeichnis der Siqnalisationsnormen 640801-899
SNV 81119-1945 Tires and rims. Radial tires for trucks (mm tires)

Japanese Industrial Standards Committee (JISC)

JIS D 4218:1989 Contours of rims for automobiles
JIS D 9421:2005 Rims for bicycles
JIS D 9421:1997 Rims for bicycles
JIS D 4218:2021 Automobile parts -- Wheels -- Contours of rims
JIS D 4218:1999 Automobile parts -- Wheels -- Contours of rims
JIS D 4215:1995 Rims for motorcycles
JIS D 4102:1984 Wheels/rims -- Classification, designation and marking
JIS B 9203:1971 Contours of rims for agricultural machines and implements

RO-ASRO

STAS 7139/3-1991 Road vehicles FLAT BASE RIMS AND DEEP WHEEL RIMS FOR BUS, COMMERCIAL VEHICLE AND TRAILLER WHEELS Shapes and dimensions

Society of Automotive Engineers (SAE)

SAE ARP1786B-2010 Wheel Roll on Rim Criteria for Aircraft Application
SAE J2133_201002 Disc Wheel Radial Runout Low Point Marking
SAE ARP1786-1984 Wheel Roll on Rim Criteria for Aircraft Application
SAE J2133_200106 Disc Wheel Radial Runout Low Point Marking
SAE ARP1786C-2019 Wheel Roll on Rim Criteria for Aircraft Applications
SAE ARP1786-1994 WHEEL ROLL ON RIM CRITERIA FOR AIRCRAFT APPLICATION
SAE ARP1786C-2013 Wheel Roll on Rim Criteria for Aircraft Application
SAE ARP1786B-2005 Wheel Roll on Rim Criteria for Aircraft Application
SAE ARP1786A-2000 Wheel Roll on Rim Criteria for Aircraft Application
SAE J2133_201103 Disc Wheel Radial Runout Low Point Marking
SAE J851_199512 Dimensions-Wheels for Demountable Rims, Demountable Rims and Spacer Bands-Commercial Vehicles
SAE J851_200107 Dimensions--Wheels for Demountable Rims, Demountable Rims,and Spacer Bands--Commercial Vehicles
SAE J851-1987 Dimensions - Wheels for Demountable Rims@ Demountable Rims@ and Rim Spacers - Commercial Vehicles
SAE J876-2000 Wide Base Disc Wheels and Demountable Rims
SAE J851-2001 Dimensions Wheels for Demountable Rims, Demountable Rims and Spacer Bands Commercial Vehicles
SAE J851-2007 Dimensions—Wheels for Demountable Rims, Demountable Rims, and Spacer Bands—Truck and Bus
SAE J393_202206 Nomenclature - Wheels, Hubs, and Rims for Commercial Vehicles
SAE J393_201710 Nomenclature - Wheels, Hubs, and Rims for Commercial Vehicles
SAE J851-1995 Dimensions Wheels for Demountable Rims, Demountable Rims and Spacer Bands Commercial Vehicles
SAE J851-2011 Dimensions - Wheels for Demountable Rims, Demountable Rims, and Spacer Bands - Truck and Bus (Stabilized Type)
SAE J393_199110 Nomenclature-Wheels, Hubs, and Rims for Commercial Vehicles
SAE J751-1997 Off-Road Tire and Rim Classification - Construction Machines
SAE J751-1986 Off-Road Tire and Rim Classification - Construction Machines@ Recommended Practice (April 1986)
SAE J393-2022 Nomenclature - Wheels, Hubs, and Rims for Commercial Vehicles
SAE J393-1984 Nomenclature-Wheels@ Hubs@ and Rims for Commercial Vehicles
SAE J393-2017 Nomenclature Wheels, Hubs, and Rims for Commercial Vehicles
SAE J393_200107 Nomenclature--Wheels, Hubs, and Rims for Commercial Vehicles
SAE J751D-1977 OFF-HIGHWAY TIRE AND RIM CLASSIFICATION
SAE J393-1991 Nomenclature - Wheels@ Hubs@ and Rims for Commercial Vehicles@ Recommended Practice
SAE J393_198401 Nomenclature--Wheels, Hubs, and Rims for Commercial Vehicles
SAE J393_196906 Nomenclature--Wheels, Hubs, and Rims for Commercial Vehicles
SAE J393-2001 Nomenclature Wheels, Hubs, and Rims for Commercial Vehicles
SAE J393-1969 Nomenclature-Wheels and Rims-Trucks
SAE J1315-1991 Off-Road Tire and Rim Selection and Application
SAE J751_199704 Off-Road Tire and Rim Classification-Construction Machines
SAE J751D_197701 Off-Road Tire and Rim Classification-Construction Machines
SAE J751_198604 Off-Road Tire and Rim Classification-Construction Machines
SAE J1315_199101 Off-Road Tire and Rim Selection and Application
SAE J1315_201911 Off-Road Tire and Rim Selection and Application
SAE J1315-1983 Off-Road Tire and Rim Selection and Application

FMVSS - Federal Motor Vehicle Safety Standards

49 CFR 571 78 FR 15920-2013 Federal Motor Vehicle Safety Standards; Tire Selection and Rims
49 CFR 571 81 FR 78724-2016 Federal Motor Vehicle Safety Standards; Tire Selection and Rims (Final rule)

PL-PKN

PN S91240-43-1986 Pneumatic wheels Profile gaugcs for drop center rimswith flanges D, E and F
PN S91240-20-1990 Pneumatic wheels rop center rims with flanges B Profiles and main dimensions
PN S91240-31-1986 Pneumatic wheels Wide drop-center rims Profiles and main dimensions
PN S91240-22-1986 Pneumatic wheels Drop center rims with flanges D, E and F rofiles and main dimensions
PN S91240-29-1990 Pneumatic wheels Rims for powered industrial trucks Profites and main dimensions
PN S91240-27-1991 Pneumatic wheels Fiat rims nomina? diameter 15, 20 and 24 Main dimensions of internal contour
PN S91240-40-1991 Pneumatic whels Internal contour gauges for fiat rimes of 5-MO specified width

IN-BIS

IS 10694 Pt.2-1983 General requirements for automobile rims Part 2 Passenger wheel rims
IS 10694 Pt.7-1983 General requirements for automotive rims Part 7 Industrial truck rims
IS 624-1975 Bicycle rim specifications
IS 12098-1987 Specification for rims for pneumatic tires on animal-drawn vehicles

American Society for Testing and Materials (ASTM)

ASTM F2803-09(2015) Standard Test Method for Evaluating Rim Slip Performance of Tires and Wheels
ASTM F2803-21 Standard Test Method for Evaluating Rim Slip Performance of Tires and Wheels
ASTM F2803-09 Standard Test Method for Evaluating Rim Slip Performance of Tires and Wheels

Association of German Mechanical Engineers

VDI/VDE 2613-2003 Pitch and concentricity testing of gears — cylindrical gears, worm gears, bevel gears

Standard Association of Australia （SAA）

AS 4457.1:2007 Earth-moving machinery - Off-the-road wheels, rims and tyres - Maintenance and repair - Wheel assemblies and rim assemblies
AS D22:1971 Dimensions of agricultural tyres, rims and hubs
AS 4457.1:2024 Earth-moving machinery - Off-the-road wheels, rims and tyres - Maintenance and repair, Part 1: Wheel assemblies and rim assemblies