Number average molecular weight test

Number average molecular weight test, Total:237 items.

The international standard classification for "Number average molecular weight test" includes: Thermoplastic materials , Aliphatic hydrocarbons , Crude petroleum , Photographic paper, films and cartridges , Aromatic hydrocarbons , Protection against dangerous goods , Microbiology of water .

The Chinese standard classification for "Number average molecular weight test" includes: Technical Management , Lubricating oil , Synthetic resin and plastic , Surface active agent , Special electronic technology material , Crude petroleum , Basic standards and general methods for photosensitive material , General organic chemicals , Marking, packaging, transport and storage in general , Basic standards and general methods for synthetic resin and plastic , Separating machinery .

Professional Standard - Electron

SJ/T 11036-1996 Test method for average linear thermal expansion coefficent of electronic glass

Taiwan Provincial Standard of the People's Republic of China

CNS 7915-1981 Average Molecular Weight of Fatty Quaternary Ammonium Chlorides

Professional Standard - Petrochemical Industry

SH/T 0108-1992 Determination of average molecular mass and molecular weight distribution of certain polymeric additive (volume exclusion chromatography)
SH/T 0169-1992 Methods of measurement for the average molecular weight of mineral insulating oil (depression of freezing point)

Professional Standard - Energy

NB/T 20235-2013 Measurement of Wide-range Neutron Fluence Rate by Voltage Mean Square

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 5594.3-1985 Test methods for properties of structure ceramic used in electronic components--Test method for mean coefficient of linear expansion
GB/T 13530.3-1992 Sodium ethoxylated alkyl sulfate--Determination of the mean relative molecular mass
GB/T 5178-1985 Determination of mean relative molecular mass for technical straight-chain sodium alkyl benzene sulphonates; Gas-liquid chromatographic method
GB/T 32361-2015 Test methods for pore size properties of membrane filters—Bubble point and mean flow pore test
GB/T 6598-1986 Determination of weight-average molecular weight of polystyrene standards by low angle laser light scattering method
GB/T 5758-2001 Determination for particle size range, effective size and uniformity coefficient of ion exchange resine
GB/T 5594.3-2015 Test methods for properties of structure ceramicused in electronic components and device―Part 3:Test method for mean coefficient of linear expansion
GB/T 21864-2008 Standard test method for molecular weight averages and molecular weight distribution of polystyrene by high performance size-exclusion chromatography
GB/T 17282-2012 Test method for estimation of mean relative molecular mass of petroleum oils from viscosity measurements
GB/T 5177.3-1985 Determination of mean relative molecular mass for industrial alkylbenzene--Gas-liquid chromatographic method
GB 6598-1986 Determination of Weight Average Molecular Weight of Polystyrene Standard Samples by Small Angle Laser Light Scattering Method
GB/T 36214.4-2018 Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 4:High-temperature method
GB/T 30787-2014 Binder Resin applied in digital printing materials―The determination average molecular weight and its distribution―Gel permeation chromatography
GB/T 36214.2-2018 Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 2:Universal calibration method
GB/T 5758-2023 Determination for particle size,effective size and uniformity coefficient of ion exchange resins
GB/T 6599-1986 Determination of molecular weight averages and molecular weight distribution of polystyrene standards by steric exclusion chromatography

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 36214.3-2018 Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 3:Low-temperature method
GB/T 36214.1-2018 Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 1:General principles
GB/T 36214.5-2018 Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 5:Method using light-scattering detection

未注明发布机构

ANSI/ASABE S626-2016 Landscape Irrigation System Uniformity and Application Rate Testing
DIN EN ISO 16014-5 E:2018-04 Plastics Determination of average molecular mass and molecular mass distribution of polymers using exclusion chromatography Part 5: Light scattering detection method (draft)
DIN ISO 13067 E:2021-01 Microbeam analysis - Electron backscatter diffraction - Measurement of average grain size
DIN 32876-2:1988 Verification of geometrical parameters - Electrical linear measurement - Part 2: Digital reception of the measured quantity; concepts, requirements, testing
DIN EN ISO 16014-5 E:2009-07 Plastics Determination of average molecular mass and molecular mass distribution of polymers using exclusion chromatography Part 5: Light scattering detection method (draft)

Professional Standard - Chemical Industry

HG/T 4744-2014 Determination of average molecular weight and molecular weight distribution of photographic gelatin by GFC
HG/T 3872-2006 Determination of molecular weight averages and molecular weight distribution of polystyrene standards by steric exclusion chromatography

Professional Standard - Aerospace

QJ 1867-1990 Adhesive average linear expansion coefficient test method
QJ 970-1986 Rigid solid average linear expansion coefficient test method

Professional Standard - Pharmaceutical Packaging

YBB 0020(03)-2003 Determination method of average linear thermal expansion coefficient (Trial)

Group Standards of the People's Republic of China

T/CI 038-2021 The test method of mean specific heat capacity for lithium ion battery cell

Military Standard of the People's Republic of China-General Armament Department

GJB 332-1987 Test method for average linear expansion coefficient of rigid solids

RU-GOST R

GOST 33418-2015 Testing of chemicals of environmental hazard. Determination of the Number-Average Molecular Weight and the Molecular Weight Distribution of Polymers using Gel Permeation Chromatography
GOST R ISO 13326-2003 Pneumatic tyres. Test methods for measuring uniformity
GOST 25811-1983 Means measuring laser output average power. Types. Basic parameters. Measuring methods
GOST R ISO 11771-2016 Air quality. Determination of time-averaged mass emissions and emission factors. General approach
GOST R ISO 13067-2016 State system for insuring the uniformity of measurements. Microbeam analysis. Electron backscatter diffraction. Measurement of average grain size
GOST R 57268.4-2016 Polymer composites. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Part 4. High-temperature method
GOST R 57268.3-2016 Polymer composites. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Part 3. Low-temperature method
GOST R 57268.1-2016 Polymer composites. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Part 1. General principles
GOST R 57268.2-2016 Polymer composites. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Part 3. System calibration
GOST 21815.16-1986 Image intensifier and image converter tubes. Method of measuring the output brightness non- uniformity ratio

American Society for Testing and Materials (ASTM)

ASTM D4001-93(2006) Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering
ASTM D4001-13 Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering
ASTM D4001-20 Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers by Light Scattering
ASTM D6474-99(2006) Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
ASTM D6474-99 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
ASTM D2502-14(2019)e1 Standard Test Method for Estimation of Mean Relative Molecular Mass of Petroleum Oils from Viscosity Measurements
ASTM D2502-14 Standard Test Method for Estimation of Mean Relative Molecular Mass of Petroleum Oils from Viscosity Measurements
ASTM D6474-20 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
ASTM D6474-19 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
ASTM D6474-12 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
ASTM D2502-14(2019) Standard Test Method for Estimation of Mean Relative Molecular Mass of Petroleum Oils from Viscosity Measurements
ASTM D5296-05 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography
ASTM D5296-97 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography
ASTM D5296-19 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography
ASTM D4001-93(1999) Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering
ASTM E496-96 Standard Test Method for Measuring Neutron Fluence Rate and Average Energy From Neutron Generators by Radioactivation Techniques
ASTM D3536-91 Standard Test Method for Molecular Weight Averages And Molecular Weight Distribution Of Polystyrene By Liquid Exclusion Chromatography (Gel Permeation Chromatography - Gpc)
ASTM D3536-76e1 Standard Test Method for Molecular Weight Averages And Molecular Weight Distribution Of Polystyrene By Liquid Exclusion Chromatography (Gel Permeation Chromatography - Gpc)
ASTM D6579-00 Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon and Terpene Resins by Size-Exclusion Chromatography
ASTM E496-02 Standard Test Method for Measuring Neutron Fluence and Average Energy from ³ H( d,n ) ⁴ He Neutron Generators by Radioactivation Techniques ¹
ASTM D5296-11 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography
ASTM D7134-05 Standard Test Method for Molecular Mass Averages and Molecular Mass Distribution of Atactic Polystyrene by Matrix Assisted Laser Desorption/Ionization (MALDI)-Time of Flight (TOF) Mass Spectrometry (MS)
ASTM D6579-06 Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon and Terpene Resins by Size-Exclusion Chromatography
ASTM D6579-11 Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon, Rosin and Terpene Resins by Size-Exclusion Chromatography
ASTM E496-09 Standard Test Method for Measuring Neutron Fluence and Average Energy from ³ H( d,n ) ⁴ He Neutron Generators by Radioactivation Techniques ¹
ASTM E496-14 Standard Test Method for Measuring Neutron Fluence and Average Energy from? ³ H40;d,n41; ⁴ He Neutron Generators by Radioactivation Techniques
ASTM D7134-05(2012) Standard Test Method for Molecular Mass Averages and Molecular Mass Distribution of Atactic Polystyrene by Matrix Assisted Laser Desorption/Ionization (MALDI)-Time of Flight (TOF) Mass Spectrometry (MS)
ASTM E496-14e1 Standard Test Method for Measuring Neutron Fluence and Average Energy from? ³ H40;d,n41; ⁴ He Neutron Generators by Radioactivation Techniques
ASTM D6579-11(2024) Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon, Rosin and Terpene Resins by Size-Exclusion Chromatography
ASTM D3593-80(1986)e1 Test Method for Molecular Weight Averages and Molecular Weight Distribution of Certain Polymers by Liquid Size-Exclusion Chromatography (Gel Permeation Chromatography GPC) Using Universal Calibration

American National Standards Institute （ANSI)

ANSI/ASTM D5296:1997 Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography, Test Method of (08.03)
ANSI/ASTM D6474:1999 Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
ANSI/T 829 OM-2021 Score quality test
ANSI/IEEE 1450.6:2005 Standard Test Interface Language (STIL) for Digital Test Vector Data - Core Test Language (CTL)
ANSI/ASTM E2749:2010 Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens

British Standards Institution (BSI)

BS ISO 16564:2004 Rubber, raw natural - Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC)
BS ISO 16564:2004(2006) Rubber, raw natural — Determination of averagemolecularmass and molecular - mass distribution by size exclusion chromatography (SEC)
BS ISO 16014-2:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Universal calibration method
BS ISO 16014-4:2019 Plastics. Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography. High-temperature method
BS ISO 16014-4:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. High-temperature method
BS ISO 16014-3:2019 Plastics. Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography. Low-temperature method
BS ISO 13067:2011 Microbeam analysis. Electron backscatter diffraction. Measurement of average grain size
BS ISO 13067:2020 Microbeam analysis. Electron backscatter diffraction. Measurement of average grain size
BS ISO 16014-3:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Low-temperature method
BS ISO 16014-1:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. General principles
BS ISO 16014-1:2019 Plastics. Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography. General principles
BS EN 61280-2-11:2006 Fibre optic communication subsystem test procedures - Digital systems - Averaged Q-factor determination using amplitude histogram evaluation for optical signal quality monitoring
BS EN ISO 16014-5:2019 Plastics. Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography. Light-scattering method
BS ISO 16014-2:2019 Plastics. Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography. Universal calibration method
19/30365236 DC BS ISO 13067. Microbeam analysis. Electron backscatter diffraction. Measurement of average grain size
BS EN ISO 16014-5:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Method using light-scattering detection
BS IEC 62977-2-11:2023 Electronic displays - Measurement of optical characteristics. Local luminance and uniformity
BS 2846-5:1977 Guide to statistical interpretation of data - Power of tests relating to means and variances
BS 6829-3.1:1989 Analysis of surface active agents (raw materials). Sodium alkylbenzenesulphonates. Method for determination of mean relative molecular mass

Korean Agency for Technology and Standards (KATS)

KS M ISO 16564-2022 Rubber, raw natural－Determination of average molecular mass and molecular－mass distribution by size exclusion chromatography(SEC)
KS M ISO 16564:2007 Rubber, raw natural－Determination of average molecular mass and molecular－mass distribution by size exclusion chromatography(SEC)
KS M ISO 16564-2007(2017) Rubber, raw natural－Determination of average molecular mass and molecular－mass distribution by size exclusion chromatography(SEC)
KS M ISO 16564-2007(2022) Rubber, raw natural－Determination of average molecular mass and molecular－mass distribution by size exclusion chromatography(SEC)
KS M ISO 13326-2007(2017) Test methods for measuring tyre uniformity
KS L 2506-2009 Testing method for average linear thermal expansion of glass
KS M ISO 13226:2007 Rubber－Standard reference elastomers(SREs) for characterizing the effect of liquids on vuicanized rubbers
KS M ISO 13326:2007 Test methods for measuring tyre uniformity
KS M ISO 13326-2022 Test methods for measuring tyre uniformity
KS D ISO 14237-2003(2018) Surface geometry analysis - Secondary ion mass spectrometry - Method for measuring the concentration of boron atoms uniformly added in silicon
KS M ISO 13326-2007(2022) Test methods for measuring tyre uniformity
KS M ISO 4591:2007 Plastics-Film and sheeting-Determiantion of average thickness of a sample, and average thickness and yield of a roll,by gravimetric techniques(gravimetric thickness)
KS I ISO 11771-2013(2018) Air quality ― Determination of time-averaged mass emissions and emission factors ― General approach
KS C IEC 60444-8:2016 Measurement of quartz crystal unit parameters ― Part 8: Test fixture for surface mounted quartz crystal units
KS I ISO 11771-2023 Air quality — Determination of time-averaged mass emissions and emission factors — General approach
KS C IEC 60493-1:2019 Guide for the statistical analysis of ageing test data — Part 1:Methods based on mean values of normally distributed test results

GSO

GSO ISO 16564:2014 Rubber, raw natural -- Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC)
GSO ISO 16014-3:2014 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 3: Low-temperature method
GSO ISO 16014-2:2014 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 2: Universal calibration method
BH GSO ISO 16014-3:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 3: Low-temperature method
GSO ISO 16014-1:2014 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 1: General principles
OS GSO ISO 16014-3:2014 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 3: Low-temperature method
GSO ISO 13326:2016 Test methods for measuring tyre uniformity
OS GSO ISO 13067:2015 Microbeam analysis -- Electron backscatter diffraction -- Measurement of average grain size
GSO ISO 13067:2015 Microbeam analysis -- Electron backscatter diffraction -- Measurement of average grain size
OS GSO ISO 16014-4:2014 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 4: High-temperature method
BH GSO ISO 13326:2017 Test methods for measuring tyre uniformity
BH GSO ISO 16014-4:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 4: High-temperature method
GSO IEC 61501:2014 Nuclear reactor instrumentation - Wide range neutron fluence rate meter - Mean square voltage method
GSO ISO 15625:2015 Silk -- Electronic test method for defects and evenness of raw silk
BH GSO ISO 15625:2017 Silk -- Electronic test method for defects and evenness of raw silk
OS GSO ISO 15625:2015 Silk -- Electronic test method for defects and evenness of raw silk
BH GSO ISO 16014-1:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 1: General principles
GSO ISO 16014-5:2013 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 5: Method using light-scattering detection
OS GSO IEC 61280-2-11:2013 Fibre optic communication subsystem test procedures - Part 2-11: Digital systems - Averaged Q-factor determination using amplitude histogram evaluation for optical signal quality monitoring
OS GSO ISO 16014-2:2014 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 2: Universal calibration method
BH GSO ISO 16014-2:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 2: Universal calibration method
BH GSO ISO 16014-5:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 5: Method using light-scattering detection
GSO ISO 11771:2015 Air quality -- Determination of time-averaged mass emissions and emission factors -- General approach
GSO IEC 61280-2-11:2013 Fibre optic communication subsystem test procedures - Part 2-11: Digital systems - Averaged Q-factor determination using amplitude histogram evaluation for optical signal quality monitoring
BH GSO ISO 11771:2017 Air quality -- Determination of time-averaged mass emissions and emission factors -- General approach
OS GSO ISO 11771:2015 Air quality -- Determination of time-averaged mass emissions and emission factors -- General approach

International Organization for Standardization (ISO)

ISO 16564:2004 Rubber, raw natural - Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC)
ISO 16014-4:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 4: High-temperature method
ISO 13067:2011 Microbeam analysis - Electron backscatter diffraction - Measurement of average grain size
ISO 16014-4:2003 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 4: High-temperature method
ISO 16014-1:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 1: General principles
ISO 16564:2004/Amd 1:2006 Rubber, raw natural — Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC) — Amendment 1
ISO 13326:1998 Test methods for measuring tyre uniformity
ISO 16014-2:2003 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 2: Universal calibration method
ISO 16014-2:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 2: Universal calibration method
ISO 16014-4:2019 Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 4: High-temperature method
ISO 16014-3:2019 Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 3: Low-temperature method
ISO 16014-1:2019 Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 1: General principles
ISO 13067:2020 Microbeam analysis — Electron backscatter diffraction — Measurement of average grain size
ISO 16014-5:2019 Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 5: Light-scattering method
ISO 16014-5:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection
ISO 16014-3:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 3: Low-temperature method
ISO 4576:1978 Plastics; Aqueous dispersions of homopolymers and copolymers; Determination of gross particle content by sieve analysis
ISO 16014-3:2003 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 3: Low-temperature method
ISO 16014-1:2003 Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 1: General principles
ISO 16014-2:2019 Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 2: Universal calibration method
ISO 16014-1:2003/Cor 1:2005 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 1: General principles; Technical Corrigendum 1

SCC

BS ISO 16014-4:2003 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography-High-temperature method
BS ISO 16014-3:2003 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography-Low-temperature method
BS ISO 16014-1:2003 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography-General principles
BS ISO 16014-2:2003 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography-Universal calibration method
CEI EN 61280-2-11:2006 Fibre optic communication subsystem test procedures - Part 2-11: Digital systems - Averaged Q-factor determination using amplitude histogram evaluation for optical signal quality monitoring
DANSK DS/ISO 16014-5:2019 Plastics – Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography – Part 5: Light-scattering method
10/30195133 DC BS ISO 13067. Microbeam analysis. Electron backscatter diffraction. Measurement of average grain size
09/30192417 DC BS ISO 16014-4. Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Part 4. High-temperature method
DANSK DS/EN 61280-2-11:2006 Fibre optic communication subsystem test procedures -- Part 2-11: Digital systems - Averaged Q-factor determination using amplitude histogram evaluation for optical signal quality monitoring
09/30192414 DC BS ISO 16014-3. Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Part 3. Low-temperature method
DANSK DS/EN ISO 11771:2011 Air quality - Determination of time-averaged mass emissions and emission factors - General approach
DANSK DS/IEC 62977-2-11:2023 Electronic displays – Part 2-11: Measurement of optical characteristics – Local luminance and uniformity
09/30192408 DC BS ISO 16014-1. Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Part 1. General principles
DANSK DS/EN ISO 16014-5:2019 Plastics – Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography – Part 5: Light-scattering method (ISO 16014-5:2019)
AENOR UNE-EN ISO 16014-5:2020 Plastics - Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography - Part 5: Light-scattering method (ISO 16014-5:2019)
09/30191924 DC BS EN ISO 16014-5. Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Part 5. Light-scattering method
NS-EN ISO 16014-5:2019 Plastics - Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography - Part 5: Light-scattering method (ISO 16014-5:2019)
09/30192411 DC BS ISO 16014-2. Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Part 2. Universal calibration method

Association Francaise de Normalisation

NF X21-014:2012 Microbeam analysis - Electron backscatter diffraction - Measurement of average grain size.
NF EN 61280-2-11:2006 Test procedures for fiber optic telecommunications subsystems - Part 2-11: digital systems - Determination of averaged quality factor by amplitude histogram evaluation for quality monitoring...
NF EN ISO 16014-5:2019 Plastics - Determination of the average molecular mass and molecular mass distribution of polymers by size exclusion chromatography - Part 5: light scattering method
NF C93-807-2-11*NF EN 61280-2-11:2006 Fibre optic communication subsystem test procedures - Part 2-11 : digital systems - Averaged Q-factor determination using amplitude histogram evaluation for optical signal quality monitoring
NF T51-240-5:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5 : method using light-scattering method.
NF EN 10049:2014 Measurement of the average roughness Ra and the number of peaks RPc on flat metal products

AENOR

UNE 40225-2:1974 IN PERIODICAL CONTROLS OF THE ELECTRONIC EVENESS TESTER.
UNE 20512-8:1978 GUIDE FOR THE STATISTICAL ANALYSIS OF AGEING DATA. METHODS BASED ON MEAN VALUES OF NORMALLY DISTRIBUTED TEST DATA
UNE 55716:1983 SURFACE ACTIVE AGENTS. ANALYSIS OF TECHNICAL FATTY CHAIN QUATERNARY AMMONIUM CHLORIDES. DETERMINATION OF AVERAGE MOLECULAR WEIGHT

German Institute for Standardization

DIN ISO 13067:2021-08 Microbeam analysis - Electron backscatter diffraction - Measurement of average grain size (ISO 13067:2020)
DIN EN 61280-2-11:2006-11 Fibre optic communication subsystem test procedures - Part 2-11: Digital systems - Averaged Q-factor determination using amplitude histogram evaluation for optical signal quality monitoring (IEC 61280-2-11:2006); German version EN 61280-2-11:2006
DIN ISO 13067:2015 Microbeam analysis - Electron backscatter diffraction - Measurement of average grain size (ISO 13067:2011)
DIN EN ISO 16014-5:2019-09 Plastics - Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography - Part 5: Light-scattering method (ISO 16014-5:2019); German version EN ISO 16014-5:2019
DIN ISO 13067:2021 Microbeam analysis - Electron backscatter diffraction - Measurement of average grain size (ISO 13067:2020)
DIN 32876-2:1999 Verification of geometrical parameters - Electrical linear measurement - Part 2: Digital reception of the measured quantity; concepts, requirements, testing
DIN 44402-6:1972 Measurement of the electrical properties of electronic tubes and valves; methods of measuring noise factor
DIN EN ISO 16014-5:2019 Plastics - Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography - Part 5: Light-scattering method (ISO 16014-5:2019)
DIN EN ISO 11771:2011-04 Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010); German version EN ISO 11771:2010

PL-PKN

PN T06500-04-1985 Electronic measuring equipments Specifying parameters Tests
PN Z04002 Arkusz 03-1974 Air purity protection Tests of dust physical properties Determination of average mass and average statical volumetric size of dust particles

ES-UNE

UNE-EN 61280-2-11:2006 Fibre optic communication subsystem test procedures -- Part 2-11: Digital systems - Averaged Q-factor determination using amplitude histogram evaluation for optical signal quality monitoring (Endorsed by AENOR in June of 2006.)
UNE-EN ISO 16014-5:2020 Plastics - Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography - Part 5: Light-scattering method (ISO 16014-5:2019)
UNE-EN 10049:2013 Measurement of roughness average Ra and peak count RPc on metallic flat products (Endorsed by AENOR in January of 2014.)

IT-UNI

UNI 5752-1966 Tests of textiles. Sampling for the estimation of the average of some measurable characteristic.

RO-ASRO

STAS 7122/8-1988 STAT ISTICAL INTERPRETATION OF DATA Tests relating to means and variances

TH-TISI

TIS 2250.4-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 4: high.temperature method
TIS 2250.3-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 3: low.temperature method
TIS 2250.1-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 1: general principles
TIS 2250.2-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 2: universal calibration method

Danish Standards Foundation

DS/EN 61280-2-11:2006 Fibre optic communication subsystem test procedures -- Part 2-11: Digital systems - Averaged Q-factor determination using amplitude histogram evaluation for optical signal quality monitoring
DS/EN ISO 16014-5:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection

TR-TSE

TS 2630-1977 Statistical Interpretation Of Data - Technigues Of Estimation And Tests Relating To Means And Variance

Japanese Industrial Standards Committee (JISC)

JIS K 7252-3:2008 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 3: Low-temperature method
JIS K 7252-1:2008 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 1: General principles
JIS K 7252-3:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 3: Low-temperature method
JIS K 7252-1:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 1: General principles
JIS K 7252-4:2008 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 4: High-temperature method
JIS K 7252-4:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 4: High-temperature method
JIS R 3102:1995 Testing method for average linear thermal expansion of glass
JIS K 7252-2:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 2: Universal calibration method
JIS K 7252-2:2008 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 2: Universal calibration method
JIS K 7252-5:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 5: Method using light-scattering detection

European Committee for Standardization (CEN)

EN ISO 16014-5:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection
EN ISO 16014-5:2019 Plastics - Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography - Part 5: Light-scattering method (ISO 16014-5:2019)
EN ISO 11771:2010 Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010)

U.S. Air Force

AIR FORCE A-A-58042 A-1996 ANALYZER, DIGITAL DATA, ELECTRONIC TEST
AIR FORCE A-A-58042 A VALID NOTICE 1-2012 Analyzer, Digital Data, Electronic Test

Institute of Electrical and Electronics Engineers (IEEE)

IEEE 1450.6-2005 IEEE Standard Test Interface Language (STIL) for Digital Test Vector DataCore Test Language (CTL)

International Electrotechnical Commission (IEC)

IEC 61280-2-11:2006 Fibre optic communication subsystem test procedures - Part 2-11: Digital systems - Averaged Q-factor determination using amplitude histogram evaluation for optical signal quality monitoring
IEC 62977-2-11:2023 Electronic displays - Part 2-11: Measurement of optical characteristics - Local luminance and uniformity

Lithuanian Standards Office

LST EN 61280-2-11-2006 Fibre optic communication subsystem test procedures - Part 2-11: Digital systems - Averaged Q-factor determination using amplitude histogram evaluation for optical signal quality monitoring (IEC 61280-2-11:2006)

European Committee for Electrotechnical Standardization（CENELEC）

EN 61280-2-11:2006 Fibre optic communication subsystem test procedures Part 2-11: Digital systems - Averaged Q-factor determination using amplitude histogram evaluation for optical signal quality monitoring

CZ-CSN

CSN 50 3176-1960 Insulating board for electrical purposes (average quality)

KR-KS

KS C IEC 60493-1-2019 Guide for the statistical analysis of ageing test data — Part 1:Methods based on mean values of normally distributed test results

BELST

STB 1918-2008 Sugar. Enzymatic method for determination of mass fraction of raffinose

CU-NC

NC 92-13-1987 Quality Control. Estimation of the Mean. Confidence Interval

Others: