Liquid phase method linearity failed

Liquid phase method linearity failed, Total:487 items.

The international standard classification for "Liquid phase method linearity failed" includes: Chemical analysis of metals , Analytical chemistry , Fluid power systems , Filters, seals and contamination of fluids , Meat, meat products and other animal produce , Equipment for petroleum and natural gas industries in general , Non-destructive testing , Chemical analysis , Extraction and processing of petroleum and natural gas , Testing of metals , Radiation measurements , Transfusion, infusion and injection equipment , Chemical reagents , Beekeeping , Other rubber and plastics products , Corrosion of metals , Aerials , Fishing and fish breeding , Water quality in general .

The Chinese standard classification for "Liquid phase method linearity failed" includes: Metal physical property test method , Basic standards and general methods , Hydraulic and pneumatic device , Basic standards and general methods , Metallographic testing method , Steel and iron products in general , Basic standards and general methods , Petroleum extraction , Steel and iron alloy analysis method , chromatograph , General and microsurgical devices , Mass spectrometer, liquid spectrometer, energy spectrometer and combined devices of them , Beekeeping, silkworm keeping , Electrochemical, thermochemistry and optical profile type analyzer , Other rubber products , Metal chemical property test method , Technical Management , Chemical reagent in general , Tools for aquatic product and fishery , Analysis methods for toxic substances in water , Basic standards and general methods .

Professional Standard - Non-ferrous Metal

YS/T 533-2006 Self-fluxing alloy powders-Determination of solidus-Liquidus temperature range

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 21317-2007 Determination of tetracyclines residues in food of animal origin—LC-MS/MS method and HPLC method
GB/T 13305-1991 Austenitic stainless steels－Determination of area content of the α-phase－Micrographic method using STANDARD diagrams
GB/T 7193.7-1992 Test method for colour of liquid unsaturated polyester resin
GB/T 25758.3-2010 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 3: Slit camera radiographic method
GB/T 25758.2-2010 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method
GB/T 14041.2-2007 Hydraulic fluid power—Filter elements—Part 2:Verification of material compatibility with fluids
GB/T 6526-1986 Self-fluxing alloy powders--Determination of solidus-liquidus temperature range
GB/T 39077-2024 Test methods for detecting detrimental phase in austenitic-ferritic (duplex) stainless steels
GB/T 14041.2-1993 Hydraulic fluid power－Filter elements－Verification of material compatibility with fluids
GB/T 32268-2015 Method of performance testing for octadecyl bonded（C18） high performance liquid chromatography(HPLC) column

Group Standards of the People's Republic of China

T/CSTM 00984-2023 Test methods of liquid crystal polymer / modified polyimide materials for antennas
T/SBX 046-2021 Method for Determination of Elastic Coefficient of Nematic Thermotropic Liquid Crystal
T/CAIA YQ004-2018 Performance testing method for liquid chromatograph coupled with atomic fluorescence spectrometer
T/CAMMT 30-2020 Approval test method of brazing for shield machine scraper
T/CAIA YQ005-2018 Performance testing method of liquid chromatograph

Hunan Provincial Standard of the People's Republic of China

DB43/T 1657-2019 Determination of Insoluble Sugar Content in Di reed of Dongting Lake by Liquid Chromatography
DB43/T 2145-2021 Determination of aldehydes and ketones in furniture by high performance liquid chromatography

未注明发布机构

DIN EN ISO 13116 E:2013-06 Test method for determining the radiopacity of materials in dentistry (draft)
ASTM RR-D01-1085 1995 D5910-Test Method for Determination of Free Formaldehyde in Emulsion Polymers by Liquid Chromatography
SAE AMS4777J-2018 Nickel Alloy, Brazing Filler Metal 82Ni 4.5Si 7.0Cr 3.1B 3.0Fe, 1780 to 1830°F (971 to 999°C) Solidus-Liquidus Range
ASTM RR-D02-1665 2009 D1401-Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
SAE AMS 4764H-2024 Copper Alloy, Brazing Filler Metal, 52.5Cu - 38Mn - 9.5Ni, 1615 to 1700 ¡ãF (879 to 927 ¡ãC) Solidus-Liquidus Range
ASTM RR-D02-1745 2012 D1401-Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
SAE EIA-554A-2002 Method Selection for Assessment of Nonconforming Levels in Parts Per Million (PPM)
ASTM D5623-24 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection

Professional Standard - Aerospace

QJ/Z 99-1982 Stainless steel pickling solution (2) analysis method
QJ/Z 88-1982 Analysis method of stainless steel nickel plating solution
QJ/Z 163-1985 Analysis Method for Chemical Milling Solution of Stainless Steel
QJ/Z 108-1982 Analysis method of bright corrosion solution and stainless steel passivation solution
QJ 1602-1989 X-ray photographic inspection method for aluminum alloy castings
QJ/Z 100-1982 Analytical method of electrochemical polishing solution for stainless steel
QJ/Z 98-1982 Stainless steel pickling solution (1) Analysis method
QJ 1583-1988 X-ray photographic inspection method of fusion welding seam of aluminum and aluminum alloy

Professional Standard - Petroleum

SY 6677-2007 Calibration Method of Drilling Fluid Solid Phase Quantity Meter
SY/T 5834-2007 Performance specifications and measuring methods of low-solid killing fluid
SY 5834-2014 Performance evaluation index and evaluation method of low solids killing fluid
SY/T 5834-2014 Performance specifications and measuring methods of low-solid killing fluid
SY/T 5834-1993 Measurement method and evaluation index of low solids killing fluid performance

Professional Standard - Commodity Inspection

SN/T 4252-2015 Determination of imidocarb residues in foodstuffs of animal origin for export - HPLC method and LC-MS/MS method
SN/T 2079-2008 Method for analysis of stainless and alloy steels - X-ray fluorescence spectrometry
SN/T 3146-2012 Determination of Phenformin, Glibenclamide, Gliclazide, Glipizide, Glimepiride in foods for export-LC-MS/MS
SN 0697-1997 Method for the determination of oxamyl residues in meats and meat products for export - Liquid chromatographic method

Professional Standard - Machinery

JB/T 9217-1999 Methods for radiographic testing
JB/T 6857-1993 Liquid Chromatograph Test Method?
JB/T 4022.1-1999 Test method for castability of alloys.Determination of free linear contraction

Professional Standard - Education

JY/T 024-1996 General rules for high performance liquid chromatography

Professional Standard - Medicine

YY/T 0586-2016 Medical polymer products - X-ray permeability test method
YY/T 0586-2005 Medical polymer products - Test methods of radiopacity

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 35410-2017 Method of performance testing for liquid chromatography-tandem quadrupole mass spectrometry

Professional Standard - Supply and Marketing Cooperative

GH/T 1087-2013 Factuality identification method for bee glue - High performance liquid chromatography finger printing method
GH/T 1081-2012 Determination of poplar tree gum in propolis—Reversed-phase high performance liquid chromatography method

未注明发布机构

ASTM RR-D01-1085 1995 D5910-Test Method for Determination of Free Formaldehyde in Emulsion Polymers by Liquid Chromatography
ASTM D5623-24 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
SAE EIA-554A-2002 Method Selection for Assessment of Nonconforming Levels in Parts Per Million (PPM)
DIN EN ISO 13116 E:2013-06 Test method for determining the radiopacity of materials in dentistry (draft)
SAE AMS 4764H-2024 Copper Alloy, Brazing Filler Metal, 52.5Cu - 38Mn - 9.5Ni, 1615 to 1700 ¡ãF (879 to 927 ¡ãC) Solidus-Liquidus Range
ASTM RR-D02-1745 2012 D1401-Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
ASTM RR-D02-1665 2009 D1401-Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
SAE AMS4777J-2018 Nickel Alloy, Brazing Filler Metal 82Ni 4.5Si 7.0Cr 3.1B 3.0Fe, 1780 to 1830°F (971 to 999°C) Solidus-Liquidus Range

Professional Standard - Railway

TB/T 2872-1998 Test method for compatibility of filter element materials and fluids for diesel locomotives

国家质量监督检验检疫总局

SN/T 4799-2017 Detection of tuberculosis pathogenic organisms of animals. DHPLC method

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 39534-2020 Corrosion of metals and alloys—Method for determination of the uniform corrosion rate of stainless steels and nickel based alloys in liquids
GB/T 19427-2022 Determination of 12 phenolic compounds in propolis— HPLC-MS/MS method and HPLC method
GB/T 37849-2019 Method of performance testing for liquid chromatography tandem time of flight mass spectrometry
GB/T 39639-2020 Test methods of dynamic adhesive properties for dipped cords

Professional Standard - Electron

SJ 2534.8-1986 Test procedrues for antennas - Phase measurement
SJ 20884-2003 Testing method for phased array antenna

Professional Standard - Chemical Industry

HG/T 3500-1982 Method for Determination of Polarity Constant of Chemical Reagent Gas Chromatography Stationary Liquid
HG/T 3500-2011 Chemical reagent-Test method for polarity constant of liquid stationary phase in gas chromatography

Professional Standard - Aquaculture

SC/T 5023-2002 Sampling methods and acceptance lot decision rules of fishing gear materials--Synthetic fiber filaments and twine

Taiwan Provincial Standard of the People's Republic of China

CNS 14492-9-2002 Methods of measurement on radio receivers for various classes of emission -Part 9：Measurement of the characteristics relevant to radio data system (RDS) reception
CNS 14492.9-2002 Methods of measurement on radio receivers for various classes of emission -Part 9：Measurement of the characteristics relevant to radio data system (RDS) reception

Professional Standard - Energy

NB/SH/T 6013-2020 Standard practice for evaluating compatibility of binary mixtures of lubricatin

Professional Standard - Environmental Protection

HJ 648-2013 Water quality - Determination of nitroaromatics by gas chromatography
HJ 676-2013 Water quality - Determination of phenolic compounds Liquid liquid extraction gas chromatography

Professional Standard - Agriculture

GB/T 44147-2024 The method of performance testing for liquid chromatography coupled atomic fluorescence spectrometer
NY/T 1158-2006 Method for determination of metronidazole residues in animal derived food High performance liquid chromatography

中华人民共和国国家卫生和计划生育委员会

WS/T 98-1996 Urine - Determination of creatinine - Reversed - Phase high performance liquid chromatographic method

Military Standard of the People's Republic of China-General Armament Department

GJB 1486-1992 χ radiographic inspection method for fusion welded butt joints of aluminum and aluminum alloys
GJB 1486A-2021 X-ray photographic inspection methods for fusion welded butt joints of aluminum and aluminum alloys

Professional Standard - Aviation

HB 7398.1-1996 Test method for optical distortion of transparent parts - grid photography method

Anhui Provincial Standard of the People's Republic of China

DB3403/T 02-2020 Solid Phase Extraction-High Performance Liquid Chromatography of Synthetic Colorants in Food

Agricultural Standard of the People's Republic of China

农业部958号公告-6-2007 High performance liquid chromatographic method for the determination of dexamethasone residue in pig edible tissues

Professional Standard - Textile

FZ/T 01069-2007 Textiles - Unevenness of textile strands - Photoelectricity method

American National Standards Institute （ANSI)

ANSI/AWS B5.15:2009 Specification for the Qualification of Radiographic Interpreters
ANSI/ASTM D5815:1995 Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Linear Low Density Polyethylene Using Liquid Chromatography (LC)
ANSI/ASHRAE 63.2-1996 Method of Testing Liquid-Line Filter Drier Filtration Capability

Korean Agency for Technology and Standards (KATS)

KS D 0237-2017(2022) Methods of radiographic examination for welded joints in stainless steel
KS D 0237-2017 Methods of radiographic examination for welded joints in stainless steel
KS D 0278-2020 Standard test methods for pitting and crevice corrosion resistance of stainless steels and related alloys by use of ferric chloride solution
KS I ISO 2943-2005(2020) Hydraulic fluid power－Filter elements－Verification of material compatibility with fluids
KS D 0237-1982 Methods of radiographic test and classification of radiographs for stainless steel welds
KS B ISO 3722:2007 Hydraulic fluid power－Fluid sample containers－Qualifying and controlling cleaning methods
KS M ISO 10349-3-2022 Photography－Photographic－grade chemicals－Test methods－Part 3：Determination of matter insoluble in ammonium hydroxide solution
KS I 2000-2010 Functional evaluation of high performance liquid chromatograph
KS P ISO 13116:2017 Dentistry ─ Test Method for Determining Radio-Opacity of Materials
KS D 0219-1983 Method of ferric chloride corrosion tests for stainless steels
KS M 0033-2008(2018) General rules for analytical methods in high performance liquid chromatography
KS D 0219-2020 Method of ferric chloride corrosion tests for stainless steels
KS M 3331-2019 Testing methods for liquid unsaturated polyester resin
KS B ISO 3722-2017(2022) Hydraulic fluid power－Fluid sample containers－Qualifying and controlling cleaning methods
KS M ISO 4404-2:2012 Petroleum and related products－Determination of the corrosion resistance of fire-resistant hydraulic fluids－Part 2：Non-aqueous fluids
KS I 3547-2012(2017) Performance test methods for evaluating the reduction of VOCs(volatile organic compounds) and aldehyde concentrations by building material－Liquid phase building material
KS I ISO 22478:2021 Water quality — Determination of certain explosives and related compounds — Method using high-performance liquid chromatography(HPLC) with UV detection
KS M 0033-2023 General rules for analytical methods in high performance liquid chromatography
KS K 0467-2007(2012) Test method for uneveness of textile strands
KS M 0033-1993 General rules for analytical methods in high performance liquid chromatography
KS V 0928-2012(2022) Method of non-combustibility test for marine use
KS D 0241-2016(2021) Methods for radiographic test and classification by radiographs of aluminium castings
KS V 0928-2022 Method of non-combustibility test for marine use
KS K ISO TR 12960:2011 Geotextile and geotextile-related products－Screening test method for determining the resistance to liquids
KS R 1141-2006 Test methods of mixer for LPG automobiles
KS M 2074-1996 TESTING METHOD FOR UNSATURATED HYDROCARBONS IN LIQUEFIED PETROLEUM GAS
KS D 2033-2-1999 Determination of zirconium in magnesium alloys
KS M ISO 10349-3-2002(2017) Photography－Photographic－grade chemicals－Test methods－Part 3：Determination of matter insoluble in ammonium hydroxide solution
KS D 0227-2017(2022) Methods of radiographic examination for steel castings

Association Francaise de Normalisation

NF E38-334:2023 Single-phase liquid/liquid exchangers - Test procedure for determining performance
NF EN ISO 13116:2014 Oral medicine - Method for determining the radiopacity of materials
NF C57-330:2020 Photovoltaic devices - Part 10 : methods of linear dependence and linearity measurements
NF EN ISO 22478:2006 Water quality - Determination of certain explosives and related compounds - High performance liquid chromatography (HPLC) method with UV detection
NF E48-653:1991 Hydraulic fluid power. Sampling bottles. Qualifying methods and lot inspection.
NF X06-026:1987 Control by counting the proportion of non-compliant individuals or the average number of non-compliances per unit - General methods for constructing a sampling plan
NF EN IEC 60904-10:2020 Photovoltaic devices - Part 10: methods of measuring linear dependence and linearity
NF ISO 23508:2022 SBR polymérisé en solution - Méthodes d'évaluation des propriétés viscoélastiques
NF T45-106*NF ISO 23508:2022 Solution-polymerized SBR - Evaluation methods of viscoelastic properties
NF ISO 13007-5:2016 Ceramic tiles - Joint mortars and adhesives - Part 5: requirements, test methods, conformity assessment, classification and designation of water-proofing membranes applied in liquid phase under ceramic tiles...
NF EN 61099:2011 Insulating liquids - Specifications relating to new synthetic organic esters intended for electrical equipment
NF EN 15452:2008 Fertilizers - Determination of chelating agents - Determination of iron chelated by o,p-EDDHA by high-performance liquid chromatography with reversed phase polarity
NF T60-160-2*NF EN ISO 4404-2:2013 Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 2 : non-aqueous fluids
NF ISO 11916-1:2013 Soil quality - Determination of selected explosives and related compounds - Part 1: method using high performance liquid chromatography (HPLC) with ultraviolet detection
NF E29-409:2014 Industrial valves - Linear pneumatic and hydraulic actuators - Specifications
NF X20-510-2*NF EN ISO 6974-2:2012 Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 2 : uncertainty calculations
NF R15-602-6:2020 Road vehicles - Test methods for cooling fluids - Part 6 : compatibility with hard water
NF EN ISO 23162:2021 Basic Semen Analysis – Specifications and Analytical Methodology
NF X06-025:2008 Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation).
NF X06-025:1993 Sequential sampling plans for inspection by variables for percent nonconforming (know standard deviation).
NF C91-016-4-2/A1*NF EN 55016-4-2/A1:2014 Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2 : uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty
NF T73-279*NF EN 13405:2003 Surface active agents - Determination of dialkyl-tetralins content in linear alkylbenzene by high performance liquid chromatography (HPLC).
NF P61-549:2008 Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, evaluation of conformity, classification and designation.
NF P61-549:2012 Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, evaluation of conformity, classification and designation.
NF EN ISO 12960:2020 Geotextiles and related products - Selective test methods for determining resistance to acidic and alkaline liquids
NF T90-253-1*NF EN ISO 21253-1:2019 Water quality - Multi-compound class methods - Part 1: Criteria for the identification of target compounds by gas and liquid chromatography and mass spectrometry

KR-KS

KS D 0237-2017(英文版) Methods of radiographic examination for welded joints in stainless steel
KS C IEC 60904-10-2023 Photovoltaic devices Part 10: Methods of linear dependence and linearity measurements
KS I 3547-2022 Performance test methods for evaluating the reduction of volatile organic compound and aldehyde concentrations by building material — Liquid phase building material
KS I ISO 22478-2021 Water quality — Determination of certain explosives and related compounds — Method using high-performance liquid chromatography(HPLC) with UV detection
KS M 0033-2008(2023) General rules for analytical methods in high performance liquid chromatography
KS D 0227-2017(英文版) Methods of radiographic examination for steel castings

German Institute for Standardization

DIN EN 14891:2007 Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, evaluation of conformity, classification and designation; German version DIN　EN 14891:2007
DIN EN 14891:2012 Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, evaluation of conformity, classification and designation; German version EN 14891:2012
DIN EN 14891 Berichtigung 1:2008 Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, evaluation of conformity, classification and designation; German version EN 14891:2007, Corrigenda to DIN EN 14891:2007-11
DIN EN 14891:2013 Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, evaluation of conformity, classification and designation; German version EN 14891:2012 + AC:2012
DIN EN ISO 22478:2006-07 Water quality - Determination of certain explosives and related compounds - Method using high-performance liquid chromatography (HPLC) with UV detection (ISO 22478:2006); German version EN ISO 22478:2006
DIN EN ISO 15061:2001 Water quality - Determination of dissolved bromate - Method by liquid chromatography of ions (ISO 15061:2001); German version EN ISO 15061:2001
DIN EN 17681-1:2022 Textiles and textile products - Organic fluorine - Part 1: Determination of non-volatile compounds by extraction method using liquid chromatography
DIN ISO 11916-1:2014-11 Soil quality - Determination of selected explosives and related compounds - Part 1: Method using high-performance liquid chromatography (HPLC) with ultraviolet detection (ISO 11916-1:2013)
DIN EN 13405:2003 Surface active agents - Determination of dialkyl-tetralins content in linear alkylbenzene by high performance liquid chromatography (HPLC); German version EN 13405:2002
DIN EN ISO 21253-1:2022-12 Water quality - Multi-compound class methods - Part 1: Criteria for the identification of target compounds by gas and liquid chromatography and mass spectrometry (ISO 21253-1:2019); German version EN ISO 21253-1:2019

Japanese Industrial Standards Committee (JISC)

JIS K 6901:1995 Testing methods for liquid unsaturated polyester resin
JIS Z 3043:1990 Method of welding procedure qualification test for stainless-clad steel
JIS Z 3106:1971 Methods of radiographic test and classification of radiographs for stainless steel welds
JIS B 9937:2001 Hydraulic fluid power -- Fluid sample containers -- Qualifying and controlling cleaning methods
JIS K 6901:2008 Test methods for liquid unsaturated polyester resins
JIS K 6901:1999 Testing methods for liquid unsaturated polyester resin
JIS M 7002:1996 Non-ignition testing methods for non-sparking beryllium copper alloy tools
JIS H 0522:1999 Methods of radiographic test and classification by radiographs of aluminium castings
JIS H 8686:1994 Test methods for image clarity of anodic oxide coating on aluminium and aluminium alloys

British Standards Institution (BSI)

BS EN IEC 60904-10:2020 Photovoltaic devices. Methods of linear dependence and linearity measurements
BS EN ISO 4404-2:2003 Petroleum and related products — Determination of the corrosion resistance of fire-resistant hydraulic fluids — Part 2: Non-aqueous fluids
BS EN ISO 4404-2:2010 Petroleum and related products. Determination of the corrosion resistance of fire-resistant hydraulic fluids. Non-aqueous fluids
BS ISO 23508:2021 Solution-polymerized SBR. Evaluation methods of viscoelastic properties
BS ISO 18387:2019 Aerospace. Linear hydraulic utility actuator. General specifications
BS 6995:1997 Method for evaluation of vulcanization characteristics of styrene-butadiene rubber (SBR, YSBR) (emulsion and solution-polymerized types)
BS EN 12697-41:2023 Bituminous mixtures. Test methods. Resistance to de-icing fluids
BS EN 14891:2017 Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives. Requirements, test methods, assessment and verification of constancy of performance, classification and marking
21/30383494 DC BS ISO 23508. Solution-polymerized SBR. Evaluation methods of viscoelastic properties
BS CWA 14172-6:2004 EESSI conformity assessment guidance - Signature-creation device supporting signatures other than qualified
BS EN ISO 21253-1:2019 Water quality. Multi-compound class methods - Criteria for the identification of target compounds by gas and liquid chromatography and mass spectrometry
BS EN 13286-43:2003 Unbound and hydraulically bound mixtures - Test method for the determination of the modulus of elasticity of hydraulically bound mixtures
BS EN 13286-43:2003(2017) Unbound and hydraulically bound mixtures - Test method for the determination of the modulus of elasticity of hydraulically bound mixtures
BS PD CEN/TS 13286-54:2014 Unbound and hydraulically bound mixtures. Test method for the determination of frost susceptibility. Resistance to freezing and thawing of hydraulically bound mixtures

American Society for Testing and Materials (ASTM)

ASTM D6766-18 Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Aqueous Solutions
ASTM G48-11 : Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
ASTM G48-11(2020)e1 Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
ASTM D6766-20 Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Aqueous Solutions
ASTM D6766-20a Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Aqueous Solutions
ASTM D5534-94(1999) Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids
ASTM D6248-98 Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
ASTM F313-78(1983)e1 Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis
ASTM D6248-98(2004) Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
ASTM D5534-94(2011)e1 Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids
ASTM D5534-94(2005) Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids
ASTM D3410/D3410M-16e1 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
ASTM D3410/D3410M-95 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
ASTM D3410/D3410M-03 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
ASTM D6766-09 Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Liquids
ASTM D6766-06a Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Liquids
ASTM D6766-06 Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Liquids
ASTM D6766-02 Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Liquids
ASTM D4289-21 Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids
ASTM D5910-05 Standard Test Method for Determination of Free Formaldehyde in Emulsion Polymers by Liquid Chromatography
ASTM D5910-05(2019) Standard Test Method for Determination of Free Formaldehyde in Emulsion Polymers by Liquid Chromatography
ASTM D5910-96 Standard Test Method for Determination of Free Formaldehyde in Emulsion Polymers by Liquid Chromatography
ASTM D6766-12 Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Aqueous Solutions
ASTM D4289-19 Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids
ASTM A994-13 Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys
ASTM D7646-10 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
ASTM A994-12 Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys
ASTM D4289-03(2008) Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids
ASTM D5910-05(2012) Standard Test Method for Determination of Free Formaldehyde in Emulsion Polymers by Liquid Chromatography
ASTM D4289-13(2014)e1 Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids
ASTM D4289-24a Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids
ASTM D2548-69 Method of Analysis of Oil Soluble Petroleum Sulfonates by Liquid Chromatography
ASTM D5534-94(2018) Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids
ASTM D4289-24 Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids
ASTM D3712-18 Standard Test Method of Analysis of Oil-Soluble Sulfonates by Liquid Chromatography
ASTM D5306-92(2002)e1 Standard Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids
ASTM D4289-13 Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids
ASTM D5837-12 Standard Test Method for Furanic Compounds in Electrical Insulating Liquids by High-Performance Liquid Chromatography (HPLC)
ASTM D3712-91(2000)e1 Standard Test Method of Analysis of Oil-Soluble Petroleum Sulfonates by Liquid Chromatography
ASTM D5837-15(2023) Standard Test Method for Furanic Compounds in Electrical Insulating Liquids by High-Performance Liquid Chromatography (HPLC)
ASTM F1325-91(2023) Standard Specification for Stainless Steel Suture Needle Holders—General Workmanship Requirements and Corresponding Test Methods
ASTM E2139-05(2018) Standard Test Method for Same-Different Test
ASTM D5837-99e1 Standard Test Method for Furanic Compounds in Electrical Insulating Liquids by High- Performance Liquid Chromatography (HPLC)
ASTM D5658-95 Standard Practice for Sampling Unconsolidated Waste From Trucks
ASTM D4898-23 Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis
ASTM D5658-20 Standard Practice for Sampling Unconsolidated Waste from Trucks
ASTM F1325-91(2016) Standard Specification for Stainless Steel Suture Needle Holders-General Workmanship Requirements and Corresponding Test Methods
ASTM F1325-91(2008) Standard Specification for Stainless Steel Suture Needle Holders-General Workmanship Requirements and Corresponding Test Methods
ASTM D5837-99 Standard Test Method for Furanic Compounds in Electrical Insulating Liquids by High- Performance Liquid Chromatography (HPLC)
ASTM D5837-99(2005) Standard Test Method for Furanic Compounds in Electrical Insulating Liquids by High- Performance Liquid Chromatography (HPLC)
ASTM D7100-05 Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions
ASTM D5306-92(2007) Standard Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids
ASTM D5037-90(1996)e1 Standard Test Method for Comparison of Waterborne Petroleum Oils by High Performance Liquid Chromatography
ASTM D5306-92(1997) Standard Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids
ASTM D7100-11 Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions
ASTM G123-00 Standard Test Method for Evaluating Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content in Boiling Acidified Sodium Chloride Solution
ASTM D1582-98 Standard Test Method for Nonvolatile Content of Liquid Phenol, Resorcinol, and Melamine Adhesives
ASTM D3712-05 Standard Test Method of Analysis of Oil-Soluble Petroleum Sulfonates by Liquid Chromatography
ASTM D7100-06 Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions
ASTM D7100-11(2020) Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions
ASTM A994-98 Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys
ASTM A994-09 Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys
ASTM C1720-21 Standard Test Methods for Determining Liquidus Temperature of Waste Glasses and Simulated Waste Glasses
ASTM D1582-98(2004) Standard Test Method for Nonvolatile Content of Liquid Phenol, Resorcinol, and Melamine Adhesives
ASTM C1720-17 Standard Test Method for Determining Liquidus Temperature of Waste Glasses and Simulated Waste Glasses
ASTM G123-00(2015) Standard Test Method for Evaluating Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content in Boiling Acidified Sodium Chloride Solution
ASTM D2580-06(2012) Standard Test Method for Phenols in Water by Gas-Liquid Chromatography
ASTM E476-87(1993) Standard Test Method for Thermal Instability of Confined Condensed Phase Systems (Confinement Test)
ASTM C1221-10 Standard Test Method for Nondestructive Analysis of Special Nuclear Materials in Homogeneous Solutions by Gamma-Ray Spectrometry
ASTM C1221-92(2004) Standard Test Method for Nondestructive Analysis of Special Nuclear Materials in Homogeneous Solutions by Gamma-Ray Spectrometry
ASTM C1720-17e1 Standard Test Method for Determining Liquidus Temperature of Waste Glasses and Simulated Waste Glasses
ASTM C1250-93(1998) Standard Test Method for Nonvolatile Content of Cold Liquid-Applied Elastomeric Waterproofing Membranes
ASTM F2861-15 Standard Test Method for Enhanced Performance of Combination Oven in Various Modes
ASTM C1221-92(1998) Standard Test Method for Nondestructive Analysis of Special Nuclear Materials in Homogeneous Solutions by Gamma-Ray Spectrometry
ASTM E746-93(1998) Standard Test Method for Determining Relative Image Quality Response of Industrial Radiographic Film
ASTM A994-03 Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys
ASTM F2861-17 Standard Test Method for Enhanced Performance of Combination Oven in Various Modes
ASTM D3712-05(2017) Standard Test Method of Analysis of Oil-Soluble Petroleum Sulfonates by Liquid Chromatography
ASTM E746-02 Standard Test Method for Determining Relative Image Quality Response of Industrial Radiographic Film
ASTM G123-00(2005) Standard Test Method for Evaluating Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content in Boiling Acidified Sodium Chloride Solution

RO-ASRO

SR 2567-5-1996 Soft drinks - Methods of analysis - Determination of artificial sweeteners - Method using high-performance liquid chromatography

SCC

ASD-STAN PREN 3877:1997 Aerospace Series Metallic Materials Test Method Determination of Solidus and Liquidus Temperatures by Differential Thermal Analysis of Braze Alloys
UNE 104308:2002 EX Synthetic materials. Elastomer sheets without reinforcement for waterproofing. Specifications and test methods.
NS-EN 14891:2007 Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives — Requirements, test methods, evaluation of conformity, classification and designation
NS-EN 14891:2012 Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives — Requirements, test methods, evaluation of conformity, classification and designation
UNE-EN 14891:2008 Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, evaluation of conformity, classification and designation
CEI EN IEC 60904-10:2021 Photovoltaic devices Part 10: Methods of linear dependence and linearity measurements
DANSK DS/EN IEC 60904-10:2020 Photovoltaic devices – Part 10: Methods of linear dependence and linearity measurements
DIN EN 3877 E:1998 Draft Document - Aerospace series - Metallic materials - Test method; determination of solidus and liquidus temperatures by differential thermal analysis of braze alloys
DANSK DS/EN ISO 22478:2006 Water quality - Determination of certain explosives and related compounds - Method using high-performance liquid chromatography (HPLC) with UV detection
BS 930:1940 Method of carrying out a field test for light output of sub-standard cinematograph projectors
AENOR UNE-EN ISO 22478:2007 Water quality - Determination of certain explosives and related compounds - Method using high-performance liquid chromatography (HPLC) with UV detection (ISO 22478:2006)
DIN EN IEC 60904-10:2022 Photovoltaic devices - Part 10: Methods of linear dependence and linearity measurements (IEC 60904-10:2020); German version EN IEC 60904-10:2020
NS-EN ISO 22478:2006 Water quality - Determination of certain explosives and related compounds - Method using high-performance liquid chromatography (HPLC) with UV detection (ISO 22478:2006)
CEI 46-12:1998 Rigid coaxial transmission lines and related flange connectors - General requirements and measurement methods
11/30124825 DC BS 7993. Twin ferrule connectors and associated tubing for 316 stainless steel systems. Specification and test methods
NS-EN ISO 13116:2014 Dentistry — Test Method for Determining Radio-Opacity of Materials (ISO 13116:2014)
BS PD 6599:1996 Comparison of different information modelling approaches and styles
BS 4832:1972 Method for assessing the compatibility of hydraulic and lubricating fluids with elastomeric sealing materials - petroleum oils with nitrile rubbers
DIN EN IEC 60904-10 E:2019 Draft Document - Photovoltaic devices - Part 10: Methods of linear dependence and linearity measurements (IEC 82/1461/CD:2018); Text in German and English
AS K41.401.8:1967 Standard Methods of Test for Paints, Varnishes, Lacquers and Related Materials, Method 401.8: No-pick-up time of road marking paints
BS EN 60789:1994 Methods of test for Anger type gamma cameras
AS K41.401.8:1969 Standard Methods of Test for Paints, Varnishes, Lacquers and Related Materials, Method 401.8: No-pick-up time of road marking paints
ASTM D5623-97(2004)e1 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
AENOR UNE 41123:1959 COMPATIBILITY OF MORTARS AND CONCRETES, WHICH DIFFER FROM EACH OTHER IN THE SPECIES OF BINDER
DANSK DS/ISO 11916-1:2013 Soil quality - Determination of selected explosives and related compounds - Part 1: Method using high-performance liquid chromatography (HPLC) with ultraviolet detection
BS 7276:1990 Method for gas chromatographic analysis of liquefied petroleum gas
AWPA A31-06 Standard Methods for the Analysis of Solutions and Wood for Azoles by Gas Chromatography (GC)
AWPA A31-01 Standard Methods for the Analysis of Solutions and Wood for Azoles by Gas Chromatography (GC)
DANSK DS/EN 14891:2017 Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives – Requirements, test methods, assessment and verification of constancy of performance, classification and marking
AWPA A31-03 Standard Methods for the Analysis of Solutions and Wood for Azoles by Gas Chromatography (GC)
AWWA ACE63159 Addressing Uncertainty in Integrated Water Resource Planning: A Risk Methodology
DANSK DS/ISO 23162:2021 Basic semen examination – Specification and test methods
AWPA A31-15(R2021) Standard Methods for the Analysis of Solutions and Wood for Azoles by Gas Chromatography (GC)
CAN/CGSB-3.0 No./No.39.31-M88-1988 Methods of Testing Petroleum and Associated Products Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Test Method)
CAN/CGSB 4.2 No.73.3-M91/ISO 2649:1974 Methodes pour epreuves textiles - Laine - Determination de l'irregularite de masse lineique a court terme des rubans, meches et fils, a l'aide d'un regularimetre electronique des fibres - Methode electronique
AWWA WQTC64095 Analyzing the Risk of Producing Non-compliant Water in a Water Treatment Plant Using Probabilistic Risk Analysis Methodologies
AWPA A31-09 Standard Methods for the Analysis of Solutions and Wood for Azoles by Gas Chromatography (GC)
ASD-STAN prEN 6040:1970 Non-metallic materials - Test method - Analysis of thermoset systems by High Performance Liquid Chromatography (HPLC)
DIN EN 12697-55 E:2018 Draft Document - Bituminous mixtures - Test methods - Part 55: Organoleptic assessment of compatibility of constituent materials of a mixture with bitumen emulsion; German and English version prEN 12697-55:2018
DANSK DS/ISO 21253-1:2019 Water quality – Multi-compound class methods – Part 1: Criteria for the identification of target compounds by gas and liquid chromatography and mass spectrometry

IN-BIS

IS 8385-1977 Oil filter element material compatibility test method
IS 10867-1984 Specifications for disposable blood sample containers with a capacity not exceeding 25 ml
IS 13569-1993 Hydraulic fluid power. Fluid sample containers. Qualifying and controlling cleaning methods

Society of Automotive Engineers (SAE)

SAE AMS4778H-2002 Nickel Alloy Brazing Filler Metal 92Ni 4.5Si 3.1B, 1800 to 1900°F Solidus-Liquidus Range
SAE AMS4778K-2013 Nickel Alloy, Brazing Filler Metal 92Ni 4.5Si 3.1B, 1800 to 1900°F Solidus-Liquidus Range
SAE AMS4779G-2005 Nickel Alloy, Brazing Filler Metal 94Ni 3.5Si 1.8B 1800 to 1950°F (982 to 1066°C) Solidus-Liquidus Range
SAE AMS4767F-1999 Silver Alloy, Brazing Filler Metal 92.5Ag 7.2Cu 0.22Li, 1435 to 1635°F (779 to 891°C) Solidus-Liquidus Range
SAE AMS4787F-2000 Gold-Nickel Alloy, Brazing Filler Metal, High Temperature, 82Au 18Ni, 1740°F (949°C) Solidus-Liquidus Temperature
SAE AMS4773F-1999 Silver Alloy, Brazing Filler Metal 60Ag 30Cu 10Sn 1115 to 1325 °F (602 to 718°C) Solidus-Liquidus Range
SAE AMS4765F-2015 Silver Alloy@ Brazing Filler Metal 56Ag - 42Cu - 2.0Ni 1420 to 1640 ��(771 to 893 �� Solidus-Liquidus Range (UNS P07560)
SAE AMS4765E-1999 Silver Alloy, Brazing Filler Metal 56Ag 42Cu 2.0Ni 1420 to 1640 °F (771 to 893°C) Solidus-Liquidus Range
SAE ARP1611A-1995 Quality Inspection Procedure, Composites Tracer Fluoroscopy and Radiography
SAE AMS4782F-2005 Nickel Alloy, Brazing Filler Metal 71Ni 10Si 19Cr, 1975 to 2075°F (1080 to 1135°C) Solidus-Liquidus Range
SAE AMS4772J-1999 Silver Alloy, Brazing Filler Metal 54Ag 40Cu 5.0Zn 1.0Ni 1325 to 1575°F (718 to 857°C) Solidus-Liquidus Range
SAE AMS4761B-2015 Silver Alloy@ Brazing Filler Metal 38Ag �C 32Cu �C 28Zn �C 2.0Sn 1200 to 1330 ��(649 to 721 �� Solidus-Liquidus Range (UNS P07380)
SAE AMS4763A-1999 Silver Alloy, Brazing Filler Metal 56Ag 22Cu 17Zn 5.0Sn 1145 to 1205°F (618 to 652°C) Solidus-Liquidus Range
SAE MAM4778A-1992 NICKEL ALLOY BRAZING FILLER METAL 92Ni - 4.5Si - 3.1B 980 to 1040 °C Solidus-Liquidus Range
SAE AMS4774F-1999 Silver Alloy, Brazing Filler Metal 63Ag 28.5Cu 6.0Sn 2.5Ni, 1275 to 1475°F (691 to 802°C) Solidus-Liquidus Range
SAE MAM4778C-2000 NICKEL ALLOY, BRAZING FILLER METAL 92Ni - 4.5Si - 3.1B 980 to 1040 °C Solidus-Liquidus Range
SAE MAM4778B-1994 NICKEL ALLOY, BRAZING FILLER METAL 92Ni - 4.5Si - 3.1B 980 to 1040 °C Solidus-Liquidus Range
SAE AMS4778G-2000 Nickel Alloy, Brazing Filler Metal 92Ni - 4.5Si - 3.1B 1800 to 1900 °F Solidus-Liquidus Range
SAE AMS4761A-1999 Silver Alloy Brazing Filler Metal 38Ag 32Cu 28Zn 2.0Sn 1200 to 1330°F (649 to 721°C) Solidus-Liquidus Range
SAE AMS4778H-2006 Nickel Alloy, Brazing Filler Metal 92Ni - 4.5Si - 3.1B 1800 to 1900 °F Solidus-Liquidus Range
SAE MAM4778-1989 BRAZING FILLER METAL, NICKEL ALLOY 92Ni - 4.5Si - 3.1B 980° - 1040°C Solidus-Liquidus Range
SAE AMS4788A-1992 Silver Alloy Brazing Filler Metal 50Ag 28Zn 20Cu 2.0Ni 1220 to 1305°F (660 to 707°C) Solidus-Liquidus Range
SAE AMS4777G-2005 Nickel Alloy, Brazing Filler Metal 82Ni 4.5Si 7.0Cr 3.1B 3.0Fe, 1780 to 1830°F (971 to 999°C) Solidus-Liquidus Range
SAE AMS4771H-1999 Silver Alloy, Brazing Filler Metal 50Ag 16Cd 15.5Zn 15.5Cu, 3.0Ni, 1170 to 1270°F (632 to 688°C) Solidus-Liquidus Range
SAE AMS4782H-2022 Nickel Alloy, Brazing Filler Metal 71Ni - 10Si - 19Cr 1975 °F (1080 °C) Solidus, 2075 °F (1135 °C) Liquidus
SAE AMS4779L-2022 Nickel Alloy, Brazing Filler Metal 94Ni - 3.5Si - 1.8B 1800 °F (982 °C) Solidus, 1950 °F (1066 °C) Liquidus
SAE AMS4775H-2005 Nickel Alloy, Brazing Filler Metal 73Ni 0.75C 4.5Si 14Cr 3.1B 4.5Fe, 1790 to 1970°F (977 to 1077°C) Solidus-Liquidus Range
SAE EIA-554A-2015 Method Selection for Assessment of Nonconforming Levels in Parts Per Million (PPM)
SAE AMS4777H-2010 Nickel Alloy, Brazing Filler Metal 82Ni - 4.5Si - 7.0Cr - 3.1B - 3.0Fe 1780 to 1830 °F (971 to 999 °C) Solidus-Liquidus Range. (UNS N99620)
SAE AMS4776G-2005 Nickel Alloy, Brazing Filler Metal 73Ni 4.5Si 14Cr 3.1B 4.5Fe (Low Carbon) 1790 to 1970°F (977 to 1077°C) Solidus-Liquidus Range
SAE AMS4779G-2012 Nickel Alloy, Brazing Filler Metal 94Ni - 3.5Si - 1.8B 1800 to 1950 °F (982 to 1066 °C) Solidus-Liquidus Range
SAE AMS4778J-2012 Nickel Alloy Brazing Filler Metal 92Ni 4.5Si 3.1B, 1800 to 1900°F Solidus-Liquidus Range
SAE AMS4787H-2022 Gold-Nickel Alloy, Brazing Filler Metal, High Temperature 82Au - 18Ni 1740 °F (949 °C) Solidus-Liquidus Temperature
SAE AMS4782F-2012 Nickel Alloy, Brazing Filler Metal 71Ni - 10Si - 19Cr 1975 to 2075 °F (1080 to 1135 °C) Solidus-Liquidus Range
SAE AMS4782E-2000 Nickel Alloy, Brazing Filler Metal 71Ni - 10Si - 19Cr 1975 to 2075 °F (1080 to 1135 °C) Solidus-Liquidus Range
SAE AMS4775J-2010 Nickel Alloy, Brazing Filler Metal 73Ni - 0.75C - 4.5Si - 14Cr - 3.1B - 4.5Fe 1790 to 1970 Degrees F (977 to 1077 Degrees C) Solidus-Liquidus Range (UNS N99600)
SAE AMS4779F-2000 Nickel Alloy, Brazing Filler Metal 94Ni - 3.5Si - 1.8B 1800 to 1950 °F (982 to 1066 °C) Solidus-Liquidus Range
SAE AMS4787F-2008 Gold-Nickel Alloy, Brazing Filler Metal, High Temperature 82Au - 18Ni 1740 °F (949 °C) Solidus-Liquidus Temperature
SAE AMS4764H-2024 Copper Alloy, Brazing Filler Metal, 52.5Cu - 38Mn - 9.5Ni, 1615 to 1700 °F (879 to 927 °C) Solidus-Liquidus Range
SAE AMS4780E-2007 Manganese Alloy, Brazing Filler Metal 66Mn - 16Ni - 16Co - 0.80B 1770 to 1875 °F (966 to 1024 °C) Solidus-Liquidus Range
SAE AMS4769F-2009 Silver Alloy, Brazing Filler Metal 45Ag - 24Cd - 16Zn - 15Cu 1125 to 1145 °F (607 to 618 °C) Solidus-Liquidus Range
SAE AMS4783F-2003 Cobalt Alloy, High Temperature Brazing Filler Metal 50Co 8.0Si 19Cr 17Ni 4.0W 0.80B 2050 to 2100°F (1121 TO 1149°C) Solidus-Liquidus Range
SAE AMS4763C-2023 Silver Alloy, Brazing Filler Metal 56Ag - 22Cu - 17Zn - 5.0Sn 1145 to 1205 °F (618 to 652 °C) Solidus-Liquidus Range
SAE AMS4763A-2009 Silver Alloy, Brazing Filler Metal 56Ag - 22Cu - 17Zn - 5.0Sn 1145 to 1205 °F (618 to 652 °C) Solidus-Liquidus Range
SAE AMS4768H-2009 Silver Alloy, Brazing Filler Metal 35Ag - 26Cu - 21Zn - 18Cd 1125 to 1295 °F (607 to 702 °C) Solidus-Liquidus Range
SAE AMS4784G-2012 Gold-Palladium-Nickel Alloy, Brazing Filler Metal, High Temperature 50Au - 25Pd - 25Ni 2015 to 2050 °F (1102 to 1121 °C) Solidus-Liquidus Range (UNS P00500)
SAE AMS4776H-2010 Nickel Alloy, Brazing Filler Metal 73Ni - 4.5Si - 14Cr - 3.1B - 4.5Fe (Low Carbon) 1790 to 1970 °F (977 to 1077 °C) Solidus-Liquidus Range (UNS N99610)
SAE AMS4768J-2015 Silver Alloy, Brazing Filler Metal 35Ag - 26Cu - 21Zn - 18Cd 1125 to 1295 °F (607 to 702 °C) Solidus-Liquidus Range
SAE AMS4761A-2009 Silver Alloy, Brazing Filler Metal 38Ag - 32Cu - 28Zn - 2.0Sn 1200 to 1330 °F (649 to 721 °C) Solidus-Liquidus Range
SAE AMS4775L-2023 Nickel Alloy, Brazing Filler Metal 73Ni - 0.75C - 4.5Si - 14Cr - 3.1B - 4.5Fe 1790 °F (977 °C) Solidus to 1970 °F (1077 °C) Liquidus
SAE AMS4771J-2015 Silver Alloy, Brazing Filler Metal 50Ag - 16Cd - 15.5Zn - 15.5Cu - 3.0Ni 1170 to 1270 °F (632 to 688 °C) Solidus-Liquidus Range
SAE AMS4771H-2009 Silver Alloy, Brazing Filler Metal 50Ag - 16Cd - 15.5Zn - 15.5Cu - 3.0Ni 1170 to 1270 °F (632 to 688 °C) Solidus-Liquidus Range
SAE AMS4788A-2009 Silver Alloy Brazing Filler Metal 50Ag - 28Zn - 20Cu - 2.0Ni 1220 to 1305 °F (660 to 707 °C) Solidus-Liquidus Range
SAE AMS4770L-2015 Silver Alloy Brazing Filler Metal 50Ag - 18Cd - 16.5Zn - 15.5Cu 1160 to 1175 °F (627 to 635 °C) Solidus-Liquidus Range
SAE AMS4770K-2009 Silver Alloy Brazing Filler Metal 50Ag - 18Cd - 16.5Zn - 15.5Cu 1160 to 1175 °F (627 to 635 °C) Solidus-Liquidus Range
SAE AMS4777K-2023 Nickel Alloy, Brazing Filler Metal 82Ni - 4.5Si - 7.0Cr - 3.1B - 3.0Fe 1780 °F (971 °C) Solidus to 1830 °F (999 °C) Liquidus Range
SAE AMS4776F-2000 Nickel Alloy, Brazing Filler Metal 73Ni - 4.5Si - 14Cr - 3.1B - 4.5Fe (Low Carbon) 1790 to 1970 °F (977 to 1077 °C) Solidus-Liquidus Range
SAE AMS4776K-2023 Nickel Alloy, Brazing Filler Metal, 73Ni - 4.5Si - 14Cr - 3.1B - 4.5Fe (Low Carbon), 1790 °F (977 °C) Solidus to 1970 °F (1077 °C) Liquidus Range

Danish Standards Foundation

DS/ISO 3722:1989 Hydraulic fluid power. Fluid sample containers. Qualifying and controlling cleaning methods
DS/EN IEC 60904-10:2020 Photovoltaic devices – Part 10: Methods of linear dependence and linearity measurements
DS/ISO 11916-1:2013 Soil quality - Determination of selected explosives and related compounds - Part 1: Method using high-performance liquid chromatography (HPLC) with ultraviolet detection

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization

PREN 3877-1993 Aerospace Series Test Method for Braze Alloys Determination of Solidus and Liquidus Temperatures by Differential Thermal Analysis
PREN 3877-1997 Aerospace Series Metallic Materials Test Method Determination of Solidus and Liquidus Temperatures by Differential Thermal Analysis of Braze Alloys (Edition P 1)

Aerospace, Security and Defence Industries Association of Europe (ASD)

ASD-STAN PREN 3877-1997 Aerospace Series Metallic Materials Test Method Determination of Solidus and Liquidus Temperatures by Differential Thermal Analysis of Braze Alloys (Edition P 1)

SAE - SAE International

SAE AMS4787G-2017 Gold-Nickel Alloy, Brazing Filler Metal, High Temperature, 82Au 18Ni, 1740°F (949°C) Solidus-Liquidus Temperature
SAE AMS4778D-1989 Brazing Filler Metal@ Nickel Alloy 92Ni - 4.5Si - 3.1B 1800° to 1900 °F Solidus-Liquidus Range (UNS N99630)
SAE AMS4778F-1994 NICKEL ALLOY@ BRAZING FILLER METAL 92Ni - 4.5Si - 3.1B 1800 to 1900 degrees Solidus-Liquidus Range (UNS N99630)
SAE AMS4782G-2017 Nickel Alloy@ Brazing Filler Metal 71Ni - 10Si - 19Cr 1975 °F (1080 °C) Solidus@ 2075 °F (1135 °C) Liquidus (UNS N99650)
SAE AMS4779J-2017 Nickel Alloy@ Brazing Filler Metal 94Ni - 3.5Si - 1.8B 1800 °F (982 °C) Solidus@ 1950 °F (1066 °C) Liquidus (UNS N99640)
SAE MAM4778D-2003 Nickel Alloy@ Brazing Filler Metal 92Ni - 4.5Si - 3.1B 980 to 1040 °C Solidus-Liquidus Range (UNS N99630)
SAE AMS4778L-2019 Nickel Alloy@ Brazing Filler Metal 92Ni - 4.5Si - 3.1B 1800 to 1900 °F Solidus-Liquidus Range (UNS N99630)
SAE AMS4778E-1992 Nickel Alloy Brazing Filler Metal 92Ni - 4.5Si - 3.1B 1800 to 1900 °F Solidus-Liquidus Range (UNS N99630)
SAE AMS4779K-2018 Nickel Alloy@ Brazing Filler Metal 94Ni - 3.5Si - 1.8B 1800 °F (982 °C) Solidus@ 1950 °F (1066 °C) Liquidus (UNS N99640)
SAE AMS4787D-1992 Gold-Nickel Alloy Brazing Filler Metal@ High Temperature 82Au - 18Ni 1740 Degrees F (949 Degrees C) Solidus- Liquidus Temperature
SAE MAM4778C-1995 Nickel Alloy@ Brazing Filler Metal 92Ni - 4.5Si - 3.1B 980 to 1040 Degrees C Solidus- Liquidus Range (UNS N99630)
SAE AMS4778G-1995 Nickel Alloy@ Brazing Filler Metal 92Ni - 4.5Si - 3.1B 1800 to 1900 Degrees F Solidus-Liquidus Range (UNS N99630)
SAE AMS4782D-1994 Nickel Alloy@ Brazing Filler Metal 71Ni - 10Si - 19Cr 1975 to 2075 °F (1080 to 1135 °C) Solidus-Liquidus Range (UNS N99650)
SAE AMS4773G-2016 Silver Alloy@ Brazing Filler Metal 60Ag – 30Cu – 10Sn 1115 to 1325 °F (602 to 718 °C) Solidus-Liquidus Range (UNS P07600)
SAE AMS4780G-2018 Manganese Alloy@ Brazing Filler Metal 66Mn - 16Ni - 16Co - 0.80B 1770 to 1875 °F (966 to 1024 °C) Solidus-Liquidus Range (UNS M26800)
SAE AMS4789-1992 SILVER ALLOY BRAZING FILLER METAL 56Ag - 22Cu - 17Zn - 5.0Sn 1152 to 1205 °F (618 to 652°C) Solidus-Liquidus Range (UNS P07563)
SAE AMS4775K-2018 Nickel Alloy@ Brazing Filler Metal 73Ni - 0.75C - 4.5Si - 14Cr - 3.1B - 4.5Fe 1790 °F (977 °C) Solidus to 1970 °F (1077 °C) Liquidus (UNS N99600)
SAE AMS4779D-1992 Nickel Alloy Brazing Filler Metal 94Ni - 3.5Si - 1.8B 1800 to 1950 °F (982 to 1066 °C) Solidus-Liquidus Range (UNS N99640)
SAE AMS4782C-1992 Nickel Alloy Brazing Filler Metal 71Ni - 10Si - 19Cr 1975 to 2075 °F (1080 to 1135 °C) Solidus-Liquidus Range (UNS N99650)
SAE AMS4777E-1994 Nickel Alloy@ Brazing Filler Metal 82Ni - 4.5Si - 7.0Cr - 3.1B - 3.0Fe 1780 to 1830 °F (971 to 999 °C) Solidus-Liquidus Range (UNS N99620)
SAE AMS4787E-1999 Gold-Nickel Alloy@ Brazing Filler Metal@ High Temperature 82Au - 18Ni 1740 Degrees F (949 Degrees C) Solidus-Liquidus Temperature (UNS P00820)
SAE AMS4779E-1994 Nickel Alloy@ Brazing Filler Metal 94Ni - 3.5Si - 1.8B 1800 to 1950 °F (982 to 1066 °C) Solidus-Liquidus Range (UNS N99640)
SAE AMS4777D-1992 Nickel Alloy@ Brazing Filler Metal 82Ni - 4.5Si - 7.0Cr - 3.1B - 3.0Fe 1780 to 1830 °F (971 to 999 °C) Solidus-Liquidus Range (UNS N99620)

BELST

STB 2391-2014 Liquid humic preparations. Method for determining compatibility with carbamidе-ammonia mixture

European Committee for Electrotechnical Standardization（CENELEC）

EN IEC 60904-10:2020 Photovoltaic devices - Part 10: Methods of linear dependence and linearity measurements

GM Daewoo

GMKOREA EDS-T-7749-2011 The Measuring Method for Mixing Storage Stability in Anti-Freeze (VERSION: 4; English/Korean; Do Not Use on New Program; No Replacement)
GMKOREA EDS-T-7013-2011 The Synthesis Method of Perspiration Solution

International Electrotechnical Commission (IEC)

IEC 60904-10:2020 Photovoltaic devices - Part 10: Methods of linear dependence and linearity measurements
CISPR 16-4-2 Edition 2.1-2014 Specification for radio disturbance and immunity measuring apparatus and methods.Part 4-2: Uncertainties, statistics and limit modelling.Measurement instrumentation uncertainty
CISPR 16-4-2 AMD 1-2014 Specification for radio disturbance and immunity measuring apparatus and methods.Part 4-2: Uncertainties, statistics and limit modelling-Measurement instrumentation uncertainty
CISPR 16-4-2-2011 Specification for radio disturbance and immunity measuring apparatus and methods.Part 4-2: Uncertainties, statistics and limit modelling.Measurement instrumentation uncertainty

RU-GOST R

GOST R 51471-1999 Milk fat. Detection method of vegetable fat by gas-liquid chromatography of sterols
GOST R 50779.76-1999 Statistical methods. Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
GOST R 50779.74-1999 Statistical methods. Sampling procedures and charts for inspection by variables for percent nonconforming
GOST R 51544-2000 Hydraulically operated portable emergency and rescue tools. Spools with hydraulic lines. Basic parameters and dimensions. Methods of testing and control
GOST 28753.2-1990 Textile threads. Method for determination of snarling tendency
GOST 25024.4-1985 Character displays. Methods measuring brightness, luminous intensity, irregularity of brightness and irregularity of luminous intensity
GOST R 53911-2010 Vegetable oils. Determination of organochlorme pesticides using gas-liquid chromatography method
GOST EN 1107-2-2011 Roofing and hydraulic-insulating flexible polymeric (thermoplastic or elastomer) materials. Method for determination of linear dimensional change
GOST 30044-1993 Durum wheat. Determination of proportion of non-wholly vitreous grains (Reference method)
GOST 25847-1983 Radiographic and fluorographic films. Sizes and controle methods
GOST 18068-1972 Laminated glued wood. Method of determining linear dimension changes in accordance with relative humidity

ES-UNE

UNE-EN IEC 60904-10:2021 Photovoltaic devices - Part 10: Methods of linear dependence and linearity measurements
UNE-EN ISO 23162:2022 Basic semen examination - Specification and test methods (ISO 23162:2021)
UNE-EN ISO 21253-1:2020 Water quality - Multi-compound class methods - Part 1: Criteria for the identification of target compounds by gas and liquid chromatography and mass spectrometry (ISO 21253-1:2019)

European Committee for Standardization (CEN)

EN ISO 14956:2002 Air quality - Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty ISO 14956: 2002
EN 17681-1:2022 Textiles and textile products - Organic fluorine - Part 1: Determination of non-volatile compounds by extraction method using liquid chromatography
EN ISO 6974-2:2012 Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 2: Uncertainty calculations (ISO 6974-2:2012)
prEN 17681-1 rev Textiles and textile products - Organic fluorine - Part 1: Determination of non-volatile compounds by extraction method using liquid chromatography
prEN 17681-1-2021 Textiles and textile products - Organic fluorine - Part 1: Determination of non-volatile compounds by extraction method using liquid chromatography
EN ISO 15061:2001 Water Quality - Determination of Dissolved Bromate - Method by Liquid Chromatography of Ions ISO 15061:2001

GOSTR

GOST R 50779.76-2018 Statistical methods. Sampling procedures for inspection by variables. Sequential sampling plans for percent nonconforming (known standard deviation)
GOST R ISO 28597-2020 Statistical methods. Acceptance sampling procedures by attributes. Specified quality levels in nonconforming items per million
GOST R 50.05.01-2018 Conformity assessment for the nuclear power use nuclear energy. Conformity assessment in the form of examination. Unified procedures. Leak tightness examination by gas and liquid methods
GOST R 50.05.09-2018 Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of control. Unified methods. Liquid penetrant control
GOST 33978-2016 Food products and mixed feeds. Method for determination of thyreostats by high perfomance liquid chromatografy-mass spectrometry
GOST R 50.05.07-2018 Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of examination. Unified procedures. Radiographic examination

GSO

GSO IEC 60588-5:2014 Askarels for transformers and capacitors. Part 5: Screening test for compatibility of materials and transformer askarels
GSO ISO 10349-3:2013 Photography -- Photographic-grade chemicals -- Test methods -- Part 3: Determination of matter insoluble in ammonium hydroxide solution
BH GSO ISO 22478:2016 Water quality - Determination of certain explosives and related compounds - Method using high-performance liquid chromatography (HPLC) with UV detection
OS GSO ISO 22478:2013 Water quality - Determination of certain explosives and related compounds - Method using high-performance liquid chromatography (HPLC) with UV detection
OS GSO IEC 60588-5:2014 Askarels for transformers and capacitors. Part 5: Screening test for compatibility of materials and transformer askarels
GSO ISO 11089:2015 Rubber, raw synthetic -- Determination of antidegradants by high-performance liquid chromatography
BH GSO ASTM D5623:2023 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
GSO ISO 18857-1:2014 Water quality -- Determination of selected alkylphenols -- Part 1: Method for non-filtered samples using liquid-liquid extraction and gas chromatography with mass selective detection
BH GSO 131:2012 Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
BH GSO ISO 21253-1:2022 Water quality — Multi-compound class methods — Part 1: Criteria for the identification of target compounds by gas and liquid chromatography and mass spectrometry
OS GSO 131:2011 Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
GSO ASTM D5623:2023 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
GSO ISO 23162:2023 Basic semen examination — Specification and test methods
GSO ISO 13875:2014 Liquid milk -- Determination of acid-soluble beta-lactoglobulin content -- Reverse-phase HPLC method
BH GSO ISO 23162:2023 Basic semen examination — Specification and test methods
GSO ISO 15033:2015 Plastics -- Determination of caprolactam and its cyclic and linear oligomers by HPLC
BH GSO ISO 13875:2016 Liquid milk -- Determination of acid-soluble beta-lactoglobulin content -- Reverse-phase HPLC method

CH-SNV

SEV 0178-1957 Winding wire. Detection method. Solution resistance of enameled wire insulation

CU-NC

NC 40-09-1-1986 Textiles. Method for Determining Textile Product Fastness. Fastness to Organic Solvents. Testing Method
NC 40-13-1984 Textiles. Methods for Determining Color Fastness Boiling ( Coction) Fastness with Sodium Carbonate. Testing Method

International Organization for Standardization (ISO)

ISO/TS 23973:2020 Liquid chromatography at critical conditions (LCCC) — Chemical heterogeneity of polyethylene oxides
ISO 4404-2:2003 Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 2: Non-aqueous fluids
ISO/IEC GUIDE 98-4:2012 Uncertainty of measurement.Part 4: Role of measurement uncertainty in conformity assessment
ISO/DIS 32543-1:2023 Non-destructive testing — Characteristics of focal spots in industrial X-ray systems — Part 1: Pinhole camera radiographic method
ISO 32543-1:2024 Non-destructive testing-Characteristics of focal spots in industrial X-ray systems-Part 1: Pinhole camera radiographic method
ISO/TR 12960:1998 Geotextiles and geotextile-related products - Screening test method for determining the resistance to liquids
ISO 13875:2005 | IDF 178:2005 Liquid milk — Determination of acid-soluble beta-lactoglobulin content — Reverse-phase HPLC method

Standard Association of Australia （SAA）

IEC 63177:2024 Test methods for compatibility of construction materials with electrical insulating liquids
AS 1580.408.4:1993 Paints and related materials - Methods of test Method 408.4: Adhesion(cross-cut)

Lithuanian Standards Office

LST EN ISO 22478:2006 Water quality - Determination of certain explosives and related compounds - Method using high-performance liquid chromatography (HPLC) with UV detection (ISO 22478:2006)
LST EN IEC 60904-10:2021 Photovoltaic devices - Part 10: Methods of linear dependence and linearity measurements (IEC 60904-10:2020)

AENOR

UNE-EN ISO 22478:2007 Water quality - Determination of certain explosives and related compounds - Method using high-performance liquid chromatography (HPLC) with UV detection (ISO 22478:2006)
UNE-EN ISO 13116:2015 Dentistry - Test Method for Determining Radio-Opacity of Materials (ISO 13116:2014)
UNE 104281-3-5:1986 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. BITUMINOUS EMULSIONS. TESTING METHODS. RELATIVE DENSITY

YU-JUS

JUS N.A8.221-1993 Solventless polymerisable resinous compounds for electrical purposes - Methods of test

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE 135.1 ERTA-2008 Method of Test for Conformance to BACnet

PL-PKN

PN-EN IEC 60904-10-2021-06 E Photovoltaic devices - Part 10: Methods of linear dependence and linearity measurements (IEC 60904-10:2020)
PN B06072-1986 Door leaves Measurement of dimension end of defects of s?uarens
PN A75101-16-1990 Fruit and vegetable produtts Preparation of samples and testing methods Determination of fruits or vegetables with defects

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE 0126-4-10-2019 Photovoltaic devices - Part 10: Methods of linear dependence and linearity measurements (IEC 82/1461/CD:2018); Text in German and English

FI-SFS

SFS-IEC 885-1:1989 Test method for electrical conductivity of wires. Not exceeding 450/750V in conductors and wires tested

European Telecommunications Standards Institute (ETSI)

ETSI ETR 273-1-1-1998 Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Improvement of Radiated Methods of Measurement (Using Test Sites) and Evaluation of the Corresponding Measurement Uncertainties; Part 1: Uncertainties in the Measurement of Mobile Radio Equip
ETSI ETR 273-1-2-1998 Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Improvement of Radiated Methods of Measurement (Using Test Sites) and Evaluation of the Corresponding Measurement Uncertainties; Part 1: Uncertainties in the Measurement of Mobile Radio Equip
ETSI TR 102 273-1-2-2001 Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Improvement on Radiated Methods of Measurement (Using Test Site) and Evaluation of the Corresponding Measurement Uncertainties; Part 1: Uncertainties in the Measurement of Mobile Radio Equipm
ETSI ETR 273-5-1998 Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Improvement of Radiated Methods of Measurement (Using Test Sites) and Evaluation of the Corresponding Measurement Uncertainties; Part 5: Striplines

AT-ON

OENORM EN 17681-1-2021 Textiles and textile products - Organic fluorine - Part 1: Determination of non-volatile compounds by extraction method using liquid chromatography

AIA/NAS - Aerospace Industries Association of America Inc.

NAS1514-2011 RADIOGRAPHIC STANDARD FOR CLASSIFICATION OF FUSION WELD DISCONTINUITIES (Rev 2)
NAS1514-1972 Radiographic Standard for Classification of Fusion Weld Discontinuities (Rev 1)
NAS1514-2015 RADIOGRAPHIC STANDARD FOR CLASSIFICATION OF FUSION WELD DISCONTINUITIES (Rev 3)

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NAS1514-2015 RADIOGRAPHIC STANDARD FOR CLASSIFICATION OF FUSION WELD DISCONTINUITIES (Rev 3)

TR-TSE

TS 628-1968 TEST METHODS FOR IRREGULARITY OF YAKN

CZ-CSN

CSN 11 9205-1972 Hydraulie pumps and moters- Spcrificnlions and test methods

ES-AENOR

UNE 104-281 Pt.3-5-1986 Test methods for asphalt materials and modified asphalt emulsions. relative thickness

CEN - European Committee for Standardization

PREN 12697-55-2018 Bituminous mixtures - Test methods - Part 55: Organoleptic assessment of compatibility of constituent materials of a mixture with bitumen emulsion

VE-FONDONORMA

NORVEN 64-9-1968 Copper wire testing methods and specifications

MSS - Manufacturers Standardization Society of the Valve and Fittings Industry.

SP-121-1997 Qualification Testing Methods for Stem Packing for Rising Stem Steel Valves
SP-121-2006 Qualification Testing Methods for Stem Packing for Rising Stem Steel Valves
SP-121 WITHDRAW NOTICE-2017 Qualification Testing Methods for Stem Packing for Rising Stem Steel Valves

Indonesia Standards

SNI 19-4956-1998 Test method for relative density, specific gravity and density (of homogeneous liquid)
SNI ISO 16549:2010 Textiles - Unevenness of textile strands - Capasitance method

Others: liquid phase linear method