Metal product spraying standards

Metal product spraying standards, Total:436 items.

The international standard classification for "Metal product spraying standards" includes: Metallic coatings , Surface treatment , Mechanical testing of metals , Nickel, chromium and their alloys , Surface preparation , Implants for surgery, prosthetics and orthotics , Equipment for the metallurgical industry .

The Chinese standard classification for "Metal product spraying standards" includes: Metal processing property test method , Material Protection , Metal and alloy powder , Other power equipment .

未注明发布机构

DIN EN ISO 11126-3:2018 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 3: Copper refinery slag
DIN EN 13507 E:2016-07 Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
DIN EN ISO 11124-4 E:2017-11 Preparation of steel substrates before painting and related products Specification for abrasives for metal blast cleaning Part 4: Low carbon cast steel shot (draft)
DIN EN ISO 11126-5 E:2017-11 Preparation of steel substrates before application of paints and related products Specification for abrasives for non-metallic blast cleaning Part 5: Nickel slag (draft)
DIN EN 16813 E:2015-01 Thermal spraying - Measurement of the electrical conductivity of thermal sprayed non-iron metal coatings by means of eddy current method
DIN EN ISO 11124-2 E:2017-11 Preparation of steel substrates before painting and related products Specification for abrasives for metal blast cleaning Part 2: Chilled sand (draft)

Military Standard of the People's Republic of China-General Armament Department

GJB 10305-2021 Specification for spray metallic coatings for resin matrix composites

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 16744-2002 Thermal spraying--Spraying and fusing of self-fluxing alloys
GB/T 9793-2012 Thermal spraying - Metallic and other inorganic coatings - Zinc,aluminium and their alloys
GB/T 9793-2012/ISO 2063-2005 Technical raying--Metallic and other inorganic coatings--Zinc,aluminum and their alloys
GB/T 9793-1997 Metallic and other inorganic coatings - Thermal spraying-Zinc、aluminium and their alloys
GB 11375-1999 Metallic and other inorganic coatings--Thermal spraying--Safe practices
GB/T 13222-1991 Thermal sprayed metallic coatings－Determination of shear strength
GB/T 11373-1989 The general principle of surface preparation of metallic substrate for thermal spraying
GB/T 8640-1988 Thermal sprayed metallic coatings; Rockwell hardness test
GB/T 9793-2012/ISO 2063:2005 Technical raying--Metallic and other inorganic coatings--Zinc,aluminum and their alloys
GB/T 8548-1987 Metallic powder material Nickel-based alloy powder for spraying
GB/T 18681-2002 Thermal spraying-Low pressure plasma spraying Ni-CO-Cr-Al-Y - Ta alloy coating

Professional Standard - Non-ferrous Metal

YS/T 537-2006 Metallic powder material Nickel-based alloy powder for spraying
YS/T 541-2006 Thermal sprayed metallic coatings - Rockwell hardness test
YS/T 550-2006 Thermal sprayed metallic coatings -- Determination of shear strength

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 11373-2017 Thermal spraying--Pre-treatment of surfaces of metallic parts and components

Taiwan Provincial Standard of the People's Republic of China

CNS 2773-1998 Coating films for metal cans of foods

国家质量技术监督局

GB/T 11375-1999 Metallic and other inorganic coatings--Thermal spraying--Safe practices

Professional Standard - Medicine

YY/T 0988.15-2016 Coatings of surgical implants-Part 15:Test methord for abrasion resistance testing of metallic thermal spray coatings

Professional Standard - Ferrous Metallurgy

YB/T 036.13-1992 General Technical Specifications for Manufacturing of Metallurgy Equipment - Spraying of Oxygen-acetylene Flame Metal Powder

ISUZU - Isuzu Motors Ltd.

ISC-B18-001A-2000 Metal spray deposition and metal cladding

Society of Automotive Engineers (SAE)

SAE AMS2450E-1991 SPRAYED METAL FINISH Aluminum
SAE AMS2450-1942 SPRAYED METAL FINISH Aluminum
SAE AMS2450D-1974 SPRAYED METAL FINISH Aluminum
SAE AMS2450C-1966 SPRAYED METAL FINISH Aluminum
SAE AMS2450B-1951 SPRAYED METAL FINISH Aluminum
SAE AMS2450A-1944 SPRAYED METAL FINISH Aluminum
SAE AMS03/3A-2017 Protection of Aluminum Alloys by Sprayed Metal Coatings
SAE AMS03/3-2015 Protection of Aluminum Alloys by Sprayed Metal Coatings
SAE AMS2450F-1994 (Noncurrent)Sprayed Metal Finish Aluminum
SAE AMS-P-81985-2001 Peening of Metals
SAE AMS-P-81985A-2004 Peening of Metals

SAE - SAE International

SAE AMS2450G-2007 Sprayed Metal Finish@ Aluminum
SAE AMS03-3-2015 Protection of Aluminum Alloys by Sprayed Metal Coatings
SAE AMS03-3A-2017 Protection of Aluminum Alloys by Sprayed Metal Coatings

CZ-CSN

CSN 41 8061-1966 Metal spraying powders SP 06
CSN 41 8060-1966 Metal spraying powders SP 04
CSN 03 8762-1989 Combined coatings of thermal spray-ed metals and organic coatings
CSN 72 7307-1976 Products from inorganic fibers. Determi- nation of corrosion effect of inorganic products on metals and metal coatings.
CSN 03 8132-1983 Protection against corrosion. Metalls, alloys, metallic coatings and non-me-tallic anoiganic coatings. Neutral salt spray test /NSS test/
CSN 03 8144-1983 Protection against corrosion. Metallic coatings and non-metallic anOrganic coatings. Copper-accelerated acetic acid salt spray test /CASS test/

The Society for Protective Coatings (SSPC)

SSPC PS 23.00-1991 Guide for Thermal Spray Metallic Coating Systems

SSPC - The Society for Protective Coatings

PS 23.00-1991 Guide for Thermal Spray Metallic Coating Systems
SP 16-2010 Brush-Off Blast Cleaning of Coated and Uncoated Galvanized Steel@ Stainless Steels@ and Non-Ferrous Metals

International Organization for Standardization (ISO)

ISO 14919:2001 Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification; Technical supply conditions
ISO 14919:2015 Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification - Technical supply conditions
ISO 12690:2010 Metallic and other inorganic coatings - Thermal spray coordination - Tasks and responsibilities
ISO 14920:2015 Thermal spraying - Spraying and fusing of self-fluxing alloys
ISO 14920:1999 Thermal spraying - Spraying and fusing of self-fluxing alloys
ISO 14920:2023 Thermal spraying — Spraying and fusing of self-fluxing alloys
ISO 2063:2005 Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys
ISO 11126-12:1993 Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 6: Iron furnace slag
ISO 11125-1:1993 Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 1: sampling
ISO 11125-1:2018 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1: Sampling

Association of German Mechanical Engineers

DVS 2301-1971 Guidelines for the thermal spraying of metallic and non-metallic materials
DVS 2301-2001 Thermal spraying processes for metallic and non-metallic materials
DVS 2301-1987 Thermal spraying processes for metallic and non-metallic materials
DVS 2301-2009 Thermal spraying processes for metallic and non-metallic materials
DVS 2311-1989 Development of primer for thermal spray coating of non-metallic materials
DVS 2311-2008 Development of primer for thermal spray coating of non-metallic materials

IN-BIS

IS 3023-1965 Recommended Metal Spraying Methods
IS 6586-1989 Metal spraying to protect steel – Recommended practices

SCC

AENOR UNE-EN 13507:2011 Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
DANSK DS/EN 13507:2018 Thermal spraying – Pre-treatment of surfaces of metallic parts and components for thermal spraying
NS-EN 13507:2010 Thermal spraying — Pre-treatment of surfaces of metallic parts and components for thermal spraying
NS-EN 13507:2001 Thermal spraying — Pre-treatment of surfaces of metallic parts and components for thermal spraying
NS-EN 13507:2018 Thermal spraying — Pre-treatment of surfaces of metallic parts and components for thermal spraying
DIN EN 13507 E:2016 Draft Document - Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying; German and English version prEN 13507:2016
MIL MIL-PRF-32577-2017 COATING SYSTEM, NONSKID, METALLIC THERMAL SPRAY APPLICATION
NS-EN 16813:2016 Thermal spraying — Measurement of the electrical conductivity of thermal sprayed non-iron metal coatings by means of eddy current method
DANSK DS/EN 16813:2016 Thermal spraying – Measurement of the electrical conductivity of thermal sprayed non-iron metal coatings by means of eddy current method
NS 1975:1970 Metal spraying of zinc and aluminium on iron and steel
DANSK DS/EN ISO 2063:2005 Thermal spraying – Metallic and other inorganic coatings – Zinc, aluminium and their alloys
DANSK DS/EN 22063:1993 Metallic and other inorganic coatings - Thermal spraying - Zinc, aluminium and their alloys
CSA G189-1966(R2003) Sprayed Metal Coatings for Atmospheric Corrosion Protection
BS EN 22063:1994 Metallic and other inorganic coatings. Thermal spraying. Zinc, aluminium and their alloys
08/30183878 DC BS EN 13507. Thermal spraying. Pre-treatment of surfaces of metallic parts and components for thermal spraying
UNE-EN 13507:2002 THERMAL SPRAYING - PRE-TREATMENT OF SURFACES OF METALLIC PARTS AND COMPONENTS FOR THERMAL SPRAYING.
NS-EN ISO 2063:2005 Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys (ISO 2063:2005)
AS 2935:1987 Prepainted metal products for household appliances - Performance requirements
MIL MIL-STD-2138A-1992 METAL SPRAYED COATINGS FOR CORROSION PROTECTION ABOARD NAVAL SHIPS (METRIC) (SUPERSEDING DOD-STD-2138)
DANSK DS/EN ISO 12690:2011 Metallic and other inorganic coatings - Thermal spray coordination - Tasks and responsibilities
BS 4147:1973 Hot applied bitumen based coatings for ferrous products. Metric units
BS EN ISO 11126-4:1998 Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives-Coal furnace slag
BS EN ISO 11126-6:1998 Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives-Iron furnace slag
NS-EN 22063:1993 Metallic and other inorganic coatings — Thermal spraying — Zinc, aluminium and their alloys — (=ISO 2063:1991, modified)
BS EN ISO 11124-2:1997 Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives-Chilled-iron grit
BS ISO 11124-5:2019 Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives-Cut steel wire
BS EN ISO 11125-1:1997 Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives-Sampling
BS EN ISO 11126-8:1998 Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives-Olivine sand
BS EN ISO 11124-4:1997 Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives-Low-carbon cast-steel shot
NS 1970:1983 Metallic coatings — Hot dip galvanized coatings on fabricated ferrous products — Requirements
MIL MIL-P-81985-1974 PEENING OF METALS
DANSK DS/EN ISO 14920:2015 Thermal spraying - Spraying and fusing of self-fluxing alloys
DANSK DS/EN ISO 17668:2016 Zinc diffusion coatings on ferrous products - Sherardizing - Specification
BS EN ISO 11126-3:1998 Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives-Copper refinery slag
SAE AMSP81985A-2004 Peening of Metals
UNE-EN 13811:2003 Sherardizing - Zinc diffusion coatings on ferrous products - Specification
BS EN ISO 11126-5:1998 Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives-Nickel refinery slag
BS EN ISO 11125-3:1997 Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives-Determination of hardness
DANSK DS/EN 2829:1995 Aerospace series - Adhesion test for metallic coatings by shot peening
NS-EN 2829:1994 Aerospace series — Adhesion test for metallic coatings by shot peening
BS EN ISO 11125-7:1997 Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives-Determination of moisture
BS 2569-1:1964 Specification for sprayed metal coatings-Protection of iron and steel by aluminium and zinc against atmospheric corrosion
AENOR UNE-EN ISO 12690:2011 Metallic and other inorganic coatings - Thermal spray coordination - Tasks and responsibilities (ISO 12690:2010)
DANSK DS/EN 10244-3:2001 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 3: Aluminium coatings
NS-EN ISO 12690:2010 Metallic and other inorganic coatings — Thermal spray coordination — Tasks and responsibilities (ISO 12690:2010)
NS-EN ISO 14920:2023 Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:2023)
DANSK DS/ISO 11124-5:2020 Preparation of steel substrates before application of paints and related products – Specifications for metallic blast-cleaning abrasives – Part 5: Cut steel wire
BS 7079-F1:1994 Preparation of steel substrates before application of paints and related products. Non-metallic blast-cleaning abrasives-General introduction and classification
UNE-EN ISO 14920:1999 THERMAL SPRAYING. SPRAYING AND FUSING OF SELF-FLUXING ALLOYS (ISO 14920:1999)
UNE-EN 10244-2:2001 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc and zinc alloy coatings.
DANSK DS/EN ISO 11126-9:2005 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 9: Staurolite
BS EN ISO 11125-6:1997 Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives-Determination of foreign matter
AENOR UNE-EN 10244-4:2001 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 4: Tin coatings.
AENOR UNE-EN 13811:2003 Sherardization. Zinc diffusion coating on ferrous products. Specifications.
NS-EN ISO 14920:1999 Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:1999)
BS EN ISO 11124-3:1997 Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives-High-carbon cast-steel shot and grit
NS-EN ISO 14920:2015 Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:2015)
DIN 52461 E:2015 Draft Document - Rain strength of just applied sprayable jointing products
BS EN ISO 11126-10:2004 Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives.-Almandite garnet
BS EN ISO 11127-5:1998 Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives-Determination of moisture
AENOR UNE-EN ISO 14920:2015 Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:2015)
12/30266965 DC BS EN ISO 14920. Thermal spraying. Spraying and fusing of self-fluxing alloys
BS EN ISO 11127-1:1998 Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives-Sampling
SAE AMSS13165A-2007 Shot Peening of Metal Parts
NS-EN ISO 17668:2016 Zinc diffusion coatings on ferrous products — Sherardizing — Specification (ISO 17668:2016)

RO-ASRO

STAS 7548-1983 Metalic coatings SPRAYED METALLIC COATINGS OF ZINC AND ALUMINIU
STAS SR EN 22063-1995 Metallic and other inorganic coatings. Thermal spraying. Zinc, aluminium and their alloys
STAS 11684/6-1985 THERMAL COATINGS BY SPRAYING WITH METALLIC POWDERS Coatings with depose of metal melting Execution specifications
STAS 11684/5-1984 THERMIC COATINGS BY WIRE SPRAYING AND METALLIC POWDERS Execution specifications

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC PE-740A SECTION 15-1997 Non-Metallic Coatings

German Institute for Standardization

DIN EN 13507:2018-10 Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying; German version EN 13507:2018
DIN EN 16813:2017-02 Thermal spraying - Measurement of the electrical conductivity of thermal sprayed non-iron metal coatings by means of eddy current method; German version EN 16813:2016
DIN EN ISO 2063:2005 Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys (ISO 2063:2005); German version EN ISO 2063:2005
DIN EN 13507:2018 Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying; German version EN 13507:2018
DIN EN 13507:2010 Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying; German version EN 13507:2010
DIN EN ISO 12690:2011-04 Metallic and other inorganic coatings - Thermal spray coordination - Tasks and responsibilities (ISO 12690:2010); German version EN ISO 12690:2010
DIN EN ISO 14920:1999 Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:1999); German version EN ISO 14920:1999
DIN EN ISO 14920:2022-11 Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO/DIS 14920:2022); German and English version prEN ISO 14920:2022 / Note: Date of issue 2022-10-07*Intended as replacement for DIN EN ISO 14920 (2015-04).
DIN EN ISO 17668:2016-06 Zinc diffusion coatings on ferrous products - Sherardizing - Specification (ISO 17668:2016); German version EN ISO 17668:2016
DIN EN 10244-5:2001 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 5: Nickel coatings; German version EN 10244-5:2001
DIN EN 10244-3:2001 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 3: Aluminium coatings; German version EN 10244-3:2001
DIN EN 10244-4:2001 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 4: Tin coatings; German version EN 10244-4:2001
DIN EN ISO 11126-5:2018-12 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 5: Nickel slag (ISO 11126-5:2018); German version EN ISO 11126-5:2018
DIN EN 2829:1995-02 Aerospace series - Adhesion test for metallic coatings by shot peening; German version EN 2829:1994
DIN EN ISO 11126-3:1997 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 3: Copper refinery slag (ISO 11126-3:1993); German version EN ISO 11126-3:1997
DIN EN ISO 11126-9:2005-03 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 9: Staurolite (ISO 11126-9:1999); German version EN ISO 11126-9:2004
DIN EN ISO 11125-1:1997 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11125-1:1993); German version EN ISO 11125-1:1997
DIN EN ISO 11126-8:2018-12 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8: Olivine (ISO 11126-8:2018); German version EN ISO 11126-8:2018
DIN EN ISO 11126-9:2005 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 9: Staurolite (ISO 11126-9:1999); German version EN ISO 11126-9:2004
DIN EN ISO 11124-2:2018-12 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 2: Chilled-iron grit (ISO 11124-2:2018); German version EN ISO 11124-2:2018
DIN EN ISO 14920:2023 Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:2023)
DIN EN 16813:2017 Thermal spraying - Measurement of the electrical conductivity of thermal sprayed non-iron metal coatings by means of eddy current method; German version EN 16813:2016
DIN EN ISO 14920:2023-11 Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:2023); German version EN ISO 14920:2023
DIN EN ISO 11124-4:2018-12 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 4: Low-carbon cast-steel shot (ISO 11124-4:2018); German version EN ISO 11124-4:2018
DIN EN ISO 11126-6:2018-12 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron and steel slags (ISO 11126-6:2018); German version EN ISO 11126-6:2018
DIN EN ISO 11124-2:2018 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 2: Chilled-iron grit (ISO 11124-2:2018)
DIN EN ISO 14920:2015-04 Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:2015); German version EN ISO 14920:2015 / Note: To be replaced by DIN EN ISO 14920 (2022-11).
DIN EN ISO 11126-4:2018-12 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 4: Coal furnace slag (ISO 11126-4:2018); German version EN ISO 11126-4:2018
DIN EN ISO 11125-1:2018-12 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11125-1:2018); German version EN ISO 11125-1:2018
DIN EN ISO 11125-7:1997 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 7: Determination of moisture (ISO 11125-7:1993); German version EN ISO 11125-7:1997
DIN EN ISO 11125-3:1997 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 3: Determination of hardness (ISO 11125-3:1993); German version EN ISO 11125-3:1997
DIN EN ISO 11124-5:2020 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 5: Cut steel wire (ISO 11124-5:2019); German and English version prEN ISO 11124-5:2020

ES-UNE

UNE-EN 13507:2019 Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
UNE-EN ISO 17668:2016 Zinc diffusion coatings on ferrous products - Sherardizing - Specification (ISO 17668:2016) (Endorsed by AENOR in April of 2016.)
UNE-EN ISO 11126-5:2019 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 5: Nickel slag (ISO 11126-5:2018)
UNE-EN ISO 11124-5:2022 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 5: Cut steel wire (ISO 11124-5:2019)
UNE-EN ISO 11124-2:2019 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 2: Chilled-iron grit (ISO 11124-2:2018, Corrected version 2018-12)
UNE-EN ISO 11126-8:2019 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8: Olivine (ISO 11126-8:2018, Corrected version 2018-11)
UNE-EN ISO 11125-1:2019 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11125-1:2018)
UNE-EN ISO 11124-4:2019 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 4: Low-carbon cast-steel shot (ISO 11124-4:2018)
UNE-EN ISO 11126-6:2019 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron and steel slags (ISO 11126-6:2018)
UNE-EN ISO 11126-4:2019 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 4: Coal furnace slag (ISO 11126-4:2018)

NO-SN

NS 1975-1970 Metal spraying of zinc and aluminium on iron and steel

Danish Standards Foundation

DS/EN 13507:2010 Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
DS/EN ISO 2063:2005 Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys
DS/EN ISO 12690:2011 Metallic and other inorganic coatings - Thermal spray coordination - Tasks and responsibilities
DS/EN ISO 14920:1999 Thermal spraying - Spraying and fusing of self-fluxing alloys
DS/EN 13811:2003 Sherardizing - Zinc diffusion coatings on ferrous products - Specification
DS/EN ISO 11126-4:1999 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 4: Coal furnace slag
DS/EN ISO 11124-2:1998 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 2: Chilled-iron grit
DS/EN ISO 11126-9:2005 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 9: Staurolite
DS/EN ISO 11126-8:1998 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8: Olivine sand
DS/EN ISO 11126-7:2000 Preparation of steel substrates before application of paints and related products - Specification for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide
DS/EN ISO 11124-4:1998 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 4: Low-carbon cast-steel shot
DS/EN ISO 11126-6:1998 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron furnace slag
DS/EN ISO 11126-5:1999 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 5: Nickel refinery slag
DS/EN ISO 11127-1:2012 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 1: Sampling
DS/EN ISO 11126-3:1998 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 3: Copper refinery slag
DS/EN ISO 11126-10:2006 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10: Almandite garnet
DS/ISO 11124-5:2020 Preparation of steel substrates before application of paints and related products – Specifications for metallic blast-cleaning abrasives – Part 5: Cut steel wire
DS/EN ISO 11125-1:1998 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1: Sampling

Association Francaise de Normalisation

NF A91-224*NF EN 13507:2018 Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
NF A91-224:2010 Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying.
NF A91-240*NF EN 16813:2016 Thermal spraying - Measurement of the electrical conductivity of thermal sprayed non-iron metal coatings by means of eddy current method
NF A91-201:1994 Metallic and other inorganic coatings. Thermal srayings. Zinc, aluminium and their alloys.
NF EN 16985:2018 Spray application booths for organic coating products - Safety requirements
NF EN 16813:2016 Thermal spraying - Measurement of the electrical conductivity of non-ferrous metal coatings obtained by thermal spraying, using the eddy current method
NF A91-214*NF EN ISO 14920:2015 Thermal spraying - Spraying and fusing of self-fluxing alloys
NF A91-214:1999 Thermal spraying. Spraying and fusing of self-fluxing alloys.
NF T35-505-4:1997 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 4 : low-carbon cast-steel shot.
NF EN ISO 14920:2015 Projection thermique - Projection et fusion d'alliages autofondants
NF EN ISO 12690:2011 Revêtements métalliques et autres revêtements inorganiques - Coordination en projection thermique - Tâches et responsabilités
NF EN 4637:2010 Aerospace series - Spraying product - White corundum
NF EN 10238:2010 Automatically shot peened and prepainted structural steel products
NF EN ISO 17668:2016 Zinc diffusion coatings on ferrous products - Sherardization - Specification
NF T35-508-5*NF EN ISO 11126-5:2018 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 5 : nickel slag
NF EN ISO 11125-1:2018 Preparation of steel substrates before application of paints and similar products - Test methods for metallic abrasives intended for preparation by spraying - Part 1: sampling
NF T35-505-2*NF EN ISO 11124-2:2018 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 2 : chilled-iron grit
NF T35-508-8*NF EN ISO 11126-8:2018 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8 : olivine
NF T35-505-5*NF EN ISO 11124-5:2021 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 5 : cut steel wire
NF A91-201:2005 Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys.
NF T35-508-9*NF EN ISO 11126-9:2005 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 9 : staurolite
NF EN ISO 11126-10:2018 Preparation of steel substrates before application of paints and similar products - Specifications for non-metallic abrasives intended for preparation by spraying - Part 10: almandite
NF T35-507-1*NF EN ISO 11125-1:2018 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1 : sampling
NF T35-508-4*NF EN ISO 11126-4:2018 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 4 : coal furnace slag
NF T35-509-1*NF EN ISO 11127-1:2021 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 1 : sampling
NF T35-508-6*NF EN ISO 11126-6:2018 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6 : Iron and steel slags
NF EN ISO 11125-2:2018 Preparation of steel substrates before application of paints and similar products - Test methods for metallic abrasives intended for preparation by spraying - Part 2: particle size analysis
NF A37-602-2*NF EN 10244-2:2009 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2 : zinc or zinc alloy coatings.
NF EN ISO 11124-1:2018 Preparation of steel substrates before application of paints and similar products - Specifications for metallic abrasives intended for preparation by spraying - Part 1: general introduction and classification
NF EN ISO 11127-2:2021 Preparation of steel substrates before application of paints and similar products - Test methods for non-metallic abrasives intended for preparation by spraying - Part 2: particle size analysis
NF T35-505-4*NF EN ISO 11124-4:2018 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 4 : low-carbon cast-steel shot
NF EN ISO 11124-5:2021 Preparation of steel substrates before application of paints and similar products - Specifications for preparation by blasting metallic abrasives - Part 5: cut steel wires
NF EN 10244-3:2001 Fils et produits tréfilés en acier - Revêtements métalliques non ferreux sur fils d'acier - Partie 3 : revêtements d'aluminium
NF EN ISO 11126-6:2018 Preparation of steel substrates before application of paints and similar products - Specifications for non-metallic abrasives intended for preparation by blasting - Part 6: metallurgical furnace slag
NF EN 4638:2010 Aerospace series - Spraying product - Iron-free brown corundum
NF T35-508-7*NF EN ISO 11126-7:2018 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7 : fused aluminium oxide
NF T35-507-1:1997 Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Part 1 : sampling.
NF T35-508-3*NF EN ISO 11126-3:2018 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 3 : copper refinery slag
NF T35-508-10*NF EN ISO 11126-10:2018 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10: almandite garnet
NF T35-507-7*NF EN ISO 11125-7:2018 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 7 : determination of moisture
NF T35-508-10:2005 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10 : almandite garnet.
NF T35-505-2:1997 Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. Part 2 : chilled-iron grit.
NF T35-508-4:1998 Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Part 4 : coal furnace slag.
NF EN ISO 11125-6:2018 Preparation of steel substrates before application of paints and similar products - Test methods for metallic abrasives intended for preparation by spraying - Part 6: determination of foreign particles
NF EN ISO 11125-4:2018 Preparation of steel substrates before application of paints and similar products - Test methods for metallic abrasives intended for preparation by spraying - Part 4: determination of apparent density
NF A91-222*NF EN ISO 12690:2011 Metallic and other inorganic coatings - Thermal spray coordination - Tasks and responsibilities
NF T35-505-3:1997 Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. Part 3 : high-carbon cast-steel shot and grit.

European Committee for Standardization (CEN)

EN 13507:2018 Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
EN 13507:2001 Thermal Spraying - Pre-Treatment of Surfaces of Metallic Parts and Components for Thermal Spraying
EN 16813:2016 Thermal spraying - Measurement of the electrical conductivity of thermal sprayed non-iron metal coatings by means of eddy current method
EN 13507:2010 Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
EN ISO 14920:2023 Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:2023)
prEN ISO 14920 Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO/DIS 14920:2022)
EN ISO 11125-1:1997 Preparation of Steel Substrates before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning Abrasives - Part 1: Sampling
EN ISO 12690:2010 Metallic and other inorganic coatings - Thermal spray coordination - Tasks and responsibilities (ISO 12690:2010)

AENOR

UNE-EN 13507:2011 Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
UNE-EN 16813:2017 Thermal spraying - Measurement of the electrical conductivity of thermal sprayed non-iron metal coatings by means of eddy current method
UNE-EN ISO 2063:2005 Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys (ISO 2063:2005)
UNE-EN ISO 12690:2011 Metallic and other inorganic coatings - Thermal spray coordination - Tasks and responsibilities (ISO 12690:2010)
UNE-EN ISO 14920:2015 Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:2015)
UNE-EN 10244-5:2001 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 5: Nickel coatings.
UNE-EN 10244-4:2001 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 4: Tin coatings.
UNE-EN 10244-3:2001 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 3: Aluminium coatings.

Lithuanian Standards Office

LST EN 13507-2010 Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
LST EN ISO 2063:2005 Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys (ISO 2063:2005)
LST EN 2829-2001 Aerospace series - Adhesion test for metallic coatings by shot peening
LST EN 13811-2003 Sherardizing - Zinc diffusion coatings on ferrous products - Specification
LST EN ISO 12690:2011 Metallic and other inorganic coatings - Thermal spray coordination - Tasks and responsibilities (ISO 12690:2010)
LST EN ISO 14920:2001 Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:1999)

BELST

STB 1043-97 Household chemical in the metal spray package. General specifications

British Standards Institution (BSI)

BS EN 13507:2018 Thermal spraying. Pre-treatment of surfaces of metallic parts and components for thermal spraying
BS EN 13507:2001 Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
BS EN 22063:1994(1999) Metallic and other inorganic coatings — Thermal spraying — Zinc, aluminium and their alloys
BS EN 13507:2010 Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
BS EN 16813:2016 Thermal spraying. Measurement of the electrical conductivity of thermal sprayed non-iron metal coatings by means of eddy current method
BS EN ISO 11124-1:1994 Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. General introduction and classification
BS 4950:1973 Specification for sprayed and fused metal coatings for engineering purposes
BS EN ISO 11126-5:2018 Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Nickel slag
BS EN ISO 11124-2:1994 Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. Chilled-iron grit
BS EN ISO 11124-2:2018 Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. Chilled-iron grit
BS EN ISO 14920:2015 Thermal spraying. Spraying and fusing of self-fluxing alloys
BS EN ISO 14920:2023 Thermal spraying. Spraying and fusing of self-fluxing alloys
BS EN ISO 14920:2015(2018) Thermal spraying - Spraying and fusing of self - fluxing alloys
BS EN ISO 14920:1999 Thermal spraying - Spraying and fusing of self-fluxing alloys
BS EN ISO 11124-5:2021 Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives - Cut steel wire
BS EN ISO 11126-9:2004 Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Staurolite
BS EN ISO 11126-6:2018 Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Iron and steel slags
BS EN ISO 11126-4:2018 Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Coal furnace slag
BS EN ISO 11125-1:1994 Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Sampling
BS EN ISO 11125-1:2018 Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Sampling
BS EN ISO 11126-9:1999 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Staurolite
BS EN ISO 11126-7:2018 Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Fused aluminium oxide
BS EN ISO 11124-4:2018 Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. Low-carbon cast-steel shot
BS EN ISO 11126-3:2018 Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Copper refinery slag
BS EN ISO 11124-2:2018(2019) Preparation of steel substrates before application of paints and related products - Specifications for metallic blast - cleaning abrasives Part 2 : Chilled - iron grit
BS EN ISO 11125-7:1994 Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of moisture
BS EN ISO 11126-9:2004(2005)*BS 7079-F9:2004 Preparation of steel substrates before application of paints and related products — Specification for non - metallic blast - cleaning abrasives — Part 9 : Staurolite
BS EN ISO 11126-4:1994 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Coal furnace slag
BS EN ISO 11125-6:2018 Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of foreign matter
BS EN ISO 11125-7:2018 Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of moisture
BS EN ISO 11125-3:2018 Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of hardness
24/30481866 DC BS ISO 11126-11 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 11: Volcanic lava
BS EN ISO 11125-3:1994 Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of hardness
22/30427361 DC BS EN ISO 14920. Thermal spraying. Spraying and fusing of self-fluxing alloys
BS EN ISO 11124-1:2018 Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. General introduction and classification
BS EN ISO 11126-1:2018 Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. General introduction and classification
BS ISO 13179-1:2014 Implants for surgery. Plasma-sprayed unalloyed titanium coatings on metallic surgical implants. General requirements
BS EN ISO 11126-10:2017 Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Almandite garnet
BS EN ISO 11126-1:1997 Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. General introduction and classification
BS EN ISO 11124-3:2018 Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. High-carbon cast-steel shot and grit

United States Navy

NAVY MIL-STD-2138 A CHG NOTICE 1-1994 METAL SPRAYED COATINGS FOR CORROSION PROTECTION ABOARD NAVAL SHIPS (METRIC)
NAVY MIL-P-81985-1974 PEENING OF METALS
NAVY MIL-P-81985 (1)-1984 PEENING OF METALS [Superseded: SAE AMS-P-81985A, SAE AMS-P-81985]

American Society for Testing and Materials (ASTM)

ASTM A902-04 Standard Terminology Relating to Metallic Coated Steel Products
ASTM A902-17a Standard Terminology Relating to Metallic Coated Steel Products
ASTM A902-06 Standard Terminology Relating to Metallic Coated Steel Products
ASTM A902-02 Standard Terminology Relating to Metallic Coated Steel Products
ASTM A902-15 Standard Terminology Relating to Metallic Coated Steel Products
ASTM A902-17 Standard Terminology Relating to Metallic Coated Steel Products
ASTM A902-01 Standard Terminology Relating to Metallic Coated Steel Products
ASTM A902-08a Standard Terminology Relating to Metallic Coated Steel Products
ASTM A902-18a Standard Terminology Relating to Metallic Coated Steel Products
ASTM A902-08 Standard Terminology Relating to Metallic Coated Steel Products
ASTM A902-03 Standard Terminology Relating to Metallic Coated Steel Products
ASTM A902-05 Standard Terminology Relating to Metallic Coated Steel Products
ASTM A902-06a Standard Terminology Relating to Metallic Coated Steel Products
ASTM A902-05a Standard Terminology Relating to Metallic Coated Steel Products
ASTM A902-99 Standard Terminology Relating to Metallic Coated Steel Products
ASTM A902-23a Standard Terminology Relating to Metallic Coated Steel Products
ASTM A902-13a Standard Terminology Relating to Metallic Coated Steel Products
ASTM A902-14 Standard Terminology Relating to Metallic Coated Steel Products
ASTM A902-13 Standard Terminology Relating to Metallic Coated Steel Products
ASTM A902-18 Standard Terminology Relating to Metallic Coated Steel Products
ASTM A902-23 Standard Terminology Relating to Metallic Coated Steel Products
ASTM B678-86(1993) Standard Test Method for Solderability of Metallic-Coated Products
ASTM B678-86(2011) Standard Test Method for Solderability of Metallic-Coated Products
ASTM B678-86(2006) Standard Test Method for Solderability of Metallic-Coated Products
ASTM B678-86(2001) Standard Test Method for Solderability of Metallic-Coated Products
ASTM B833-01 Standard Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing)
ASTM B833-00 Standard Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing)
ASTM B678-23 Standard Test Method for Solderability of Metallic-Coated Products
ASTM B678-86(2017) Standard Test Method for Solderability of Metallic-Coated Products
ASTM F1978-17 Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser
ASTM F1978-18 Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser
ASTM F1978-00(2007)e1 Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser
ASTM D6386-99(2005) Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting
ASTM D6386-99 Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting

Korean Agency for Technology and Standards (KATS)

KS D ISO 2063-2002(2022) Metallic and other inoganic coatings－Thermal spraying－Zinc, aluminium and their alloys
KS D ISO 2063-2002(2017) Metallic and other inoganic coatings－Thermal spraying－Zinc, aluminium and their alloys
KS D ISO 2063-2022 Metallic and other inoganic coatings－Thermal spraying－Zinc, aluminium and their alloys
KS D ISO 2063:2002 Metallic and other inoganic coatings-Thermal spraying-Zinc, aluminium and their alloys
KS M ISO 11124-4:2003 Preparation of steel substrates before application of paints and related products－Specifications for metallic blast-cleaning abrasives－Part 4：Low-carbon cast-steel shot
KS D 8340-1987 SPRAYED ZINC-ALUMINIUM ALLOY Sprayed zinc－Aluminium alloy coatings on iron or steelCOATINGS ON IRON OR STEEL
KS D 8340-2002 SPRAYED ZINC-ALUMINIUM ALLOY Sprayed zinc－Aluminium alloy coatings on iron or steelCOATINGS ON IRON OR STEEL
KS M ISO 11124-3:2008 Preparation of steel substrates before application of paints and related products-Specifications for metallic blast-cleaning abrasives-Part 3:High-carbon cast-steel shot and grit
KS M ISO 11126-5:2002 Preparation of steel substrates before application of paints and related products ? Specifications for non-metallic blast-cleaning abrasives ? Part 5：Nickel refinery slag
KS D 0229-2013(2018) Methods of test for hot dip aluminized coatings on ferrous products
KS M ISO 11126-3:2002 Preparation of steel substrates before application of paints and related products ? Specifications for non-metallic blast-cleaning abrasives ? Part 3：Copper refinery slag
KS D 8324-1981 Thermal spraying of self-fluxing alloys
KS D 8324-2008 Thermal spraying of self-fluxing alloys
KS M ISO 11126-4:2021 Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 4: Coal furnace slag
KS M ISO 11126-5:2021 Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 5: Nickel slag
KS M ISO 11124-2:2021 Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 2: Chilled-iron grit
KS M ISO 11126-4-2002(2017) Preparation of steel substrates before application of paints and related products?Specifications for non-metallic blast-cleaning abrasives－Part 4：Coal furnace slag
KS M ISO 11126-8:2021 Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 8: Olivine
KS M ISO 11126-9-2002(2017) Preparation of steel substrates before application of paints and related products?Specifications for non-metallic blast-cleaning abrasives?Part 9：Staurolite
KS M ISO 11126-9:2021 Preparation of steel substrates before application of paints and related products — Specification for non-metallic blast-cleaning abrasives — Part 9: Staurolite
KS M ISO 11126-10:2002 Preparation of steel substrates before application of paints and related products ? Specifications for non-metallic blast-cleaning abrasives ? Part 10：Almandite garnet
KS M ISO 11126-9:2002 Preparation of steel substrates before application of paints and related products ? Specifications for non-metallic blast-cleaning abrasives ? Part 9：Staurolite
KS M ISO 11126-6-2002(2017) Preparation of steel substrates before application of paints and related products?Specifications for non-metallic blast-cleaning abrasives?Part 6：Iron furnace slag
KS M ISO 11124-2-2002(2017) Preparation of steel substrates before application of paints and related products－Specification for metallic blast-cleaning abrasives－Part 2：Chilled-iron grit
KS T 1079-2023 Metal caps and nozzles
KS M ISO 11126-10:2021 Preparation of steel substrates before application of paints and related products — Specification for non-metallic blast-cleaning abrasives — Part 10: Almandite garnet
KS M ISO 11126-3-2002(2017) Preparation of steel substrates before application of paints and related products?Specifications for non-metallic blast-cleaning abrasives?Part 3：Copper refinery slag
KS M ISO 11125-1:2021 Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 1: Sampling
KS T 1079-2009 Metal caps and nozzles
KS M ISO 11125-1:2002 Preparation of steel substrates before application of paints and related products－Test methods for metallic blast-cleaning abrasives－Part 1：Sampling
KS M ISO 11125-1-2002(2017) Preparation of steel substrates before application of paints and related products－Test methods for metallic blast-cleaning abrasives－Part 1：Sampling
KS M ISO 11124-1-2002(2017) Preparation of steel substrates before application of paints and related products－Specification for metallic blast-cleaning abrasives－Part 1：General introduction and classification
KS M ISO 11126-3:2021 Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 3: Copper refinery slag
KS M ISO 11126-8-2002(2017) Preparation of steel substrates before application of paints and related products?Specifications for non-metallic blast-cleaning abrasives?Part 8：Olivine sand
KS M ISO 11126-5-2002(2017) Preparation of steel substrates before application of paints and related products?Specifications for non-metallic blast-cleaning abrasives?Part 5：Nickel refinery slag
KS A 1606-1994 Metal caps and nozzles
KS M ISO 11127-1:2012 Preparation of steel substrates before application of paints and related products-Test methods for non-metallic blast-cleaning abrasives-Part 1:Sampling
KS M ISO 11126-7:2021 Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 7: Fused aluminium oxide

GSO

GSO ISO 2063:2007 Thermal spraying -- Metallic and other inorganic coatings -- Zinc, aluminum and their alloys
OS GSO ISO 2063:2007 Thermal spraying -- Metallic and other inorganic coatings -- Zinc, aluminum and their alloys
OS GSO ISO 11126-4:2013 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives – Part 4: Coal furnace slag
BH GSO ISO 11126-4:2016 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives – Part 4: Coal furnace slag
GSO ISO 12690:2015 Metallic and other inorganic coatings -- Thermal spray coordination -- Tasks and responsibilities
OS GSO ISO 12690:2015 Metallic and other inorganic coatings -- Thermal spray coordination -- Tasks and responsibilities
BH GSO ISO 11126-3:2016 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 3: Copper refinery slag
OS GSO ISO 14920:2013 Thermal spraying -- Spraying and fusing of self-fluxing alloys
BH GSO ISO 14920:2016 Thermal spraying -- Spraying and fusing of self-fluxing alloys
GSO EN 10244-1:2012 Steel Wire and Wire Products – Non-ferrous Metallic Coating on Steel Wire – Part 1 : General Principles
GSO ISO 11126-4:2013 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives – Part 4: Coal furnace slag
GSO ISO 11125-1:2015 Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 1: Sampling
GSO ISO 11126-6:2013 Preparation of steel substrates before application of paints and related products – Specifications for non-metallic blast-cleaning abrasives – Part 6: Iron furnace slag
OS GSO ISO 11126-9:2013 Preparation of steel substrates before application of paints and related products – Specifications for non-metallic blast-cleaning abrasives – Part 9: Staurolite
OS GSO ISO 11126-6:2013 Preparation of steel substrates before application of paints and related products – Specifications for non-metallic blast-cleaning abrasives – Part 6: Iron furnace slag
OS GSO ISO 11124-2:2013 Preparation of steel substrates before application of paints and related products -- Specifications for metallic blast-cleaning abrasives -- Part 2: Chilled-iron grit
BH GSO ISO 11125-1:2016 Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 1: Sampling
GSO ISO 11126-3:2013 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 3: Copper refinery slag
GSO ISO 11127-7:2015 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 7: Determination of water-soluble chlorides
BH GSO ISO 11126-8:2016 Preparation of steel substrates before application of paints and related products – Specifications for non-metallic blast-cleaning abrasives – Part 8: Olivine sand
GSO ISO 13826:2015 Metallic and other inorganic coatings -- Determination of thermal diffusivity of thermally sprayed ceramic coatings by laser flash method
OS GSO ISO 11124-4:2013 Preparation of steel substrates before application of paints and related products -- Specifications for metallic blast-cleaning abrasives -- Part 4: Low-carbon cast-steel shot
BH GSO ISO 11127-1:2016 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 1: Sampling
OS GSO ISO 11126-7:2013 Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 7: Fused aluminium oxide

ZA-SANS

SANS 2063:2008 Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys
SANS 2063:1991 Metallic and other inorganic coatings - Thermal spraying - Zinc, aluminium and their alloys

Japanese Industrial Standards Committee (JISC)

JIS H 8667:2002 Test methods for cermet sprayed coatings
JIS H 9303:2004 Recommended practice for cermet sprayed coatings
JIS Z 1607:1995 Metal caps and nozzles

SE-SIS

SIS SS-ISO 3768:1979 Metallic coatings — Neutral salt spray test (NSS test)

Standard Association of Australia （SAA）

AS 2728:2007 Prefinished/prepainted sheet metal products for interior/exterior building applications—Performance requirements
AS/NZS ISO 17668:2022 Zinc diffusion coatings on ferrous products — Sherardizing — Specification

GM Europe

GME L 000 0640-1998 Spray phosphating liquid (KTL)/(special products) (Germany)

DIN

DIN EN 13507:2001 Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying; English version of DIN EN 13507

PT-IPQ

NP 1389-1988 metallic coatings Electroplated coatings of nickel plus chromium Determination of local thickness of nickel coating Jet method

PL-PKN

PN-EN ISO 11127-1-2021-07 E Preparation of steel substrates before application of paints and related products--Test methods for non-metallic blast-cleaning abrasives--Part 1: Sampling (ISO 11127-1:2020)
PN-EN ISO 11127-5-2021-07 E Preparation of steel substrates before application of paints and related products--Test methods for non-metallic blast-cleaning abrasives--Part 5: Determination of moisture (ISO 11127-5:2020)
PN H01701-1973 Non-?errous metals Halfproducts and products Marking

KR-KS

KS M ISO 11126-4-2021 Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 4: Coal furnace slag
KS M ISO 11126-5-2021 Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 5: Nickel slag
KS M ISO 11124-2-2021 Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 2: Chilled-iron grit
KS M ISO 11126-9-2021 Preparation of steel substrates before application of paints and related products — Specification for non-metallic blast-cleaning abrasives — Part 9: Staurolite
KS M ISO 11126-8-2021 Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 8: Olivine
KS M ISO 11126-10-2021 Preparation of steel substrates before application of paints and related products — Specification for non-metallic blast-cleaning abrasives — Part 10: Almandite garnet
KS M ISO 11125-1-2021 Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 1: Sampling
KS T 1079-2018(2023) Metal caps and nozzles
KS M ISO 11126-3-2021 Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 3: Copper refinery slag
KS M ISO 11126-6-2021 Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 6: Iron and steel slags

IT-UNI

UNI EN ISO 11124-5:2021 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 5: Cut steel wire
UNI EN ISO 11127-1:2021 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 1: Sampling

HU-MSZT

MSZ 12301-1963 Metal Industry Alloy Products

CEN - European Committee for Standardization

EN ISO 11125-1:2018 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1: Sampling

Others: Standard Test Method for Cohesion/Cohesion of Sprayed Fire Protection Materials on Structural Members,Spraying Standard,Standard Test Method for Adhesion or Bond Strength of Thermal Spray Coatings,Standard Test Method for Adhesion or Bond Strength of Thermal Spray Coatings,Standard Test Method for Bond Strength of Thermal Spray Coatings