Testing standard number for solid inorganic substances

Testing standard number for solid inorganic substances, Total:411 items.

The international standard classification for "Testing standard number for solid inorganic substances" includes: Non-destructive testing , Recycling .

The Chinese standard classification for "Testing standard number for solid inorganic substances" includes: Basic standards and general methods , Toxic and harmful solid waste control standards .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 19799.2-2005 Non-destructive testing - Ultrasonic testing - Calibration block No.2
GB 16487.8-2005 Environmental protection control standard for imported solid wastes as raw materials -- Waste electric motors
GB 34330-2017 Identification standards for solid wastes General rules
GB/T 19799.2-2012/ISO 7963:2006 Non=destructive testing--Ultrasonic testing--Specification for calibration block No.2
GB/T 18851-2002 Non-destructive testing--Penetrant testing--Reference blocks
GB/T 19799.1-2005 Non-destructive testing—Ultrasonic testing—Calibration block No.1
GB/T 19799.2-2012 Non-destructive testing - Ultrasonic testing - Specification for calibration block No.2
GB/T 19799.2-2012/ISO 7963-2006 Non=destructive testing--Ultrasonic testing--Specification for calibration block No.2
GB/T 19799.1-2015 Non-destructive testing―Ultrasonic testing―Specification for calibration block No.1

Liaoning Provincial Standard of the People's Republic of China

DB21/T 2840-2017 Method for rapid on-site detection of solid inorganic matter in molded polystyrene foam for thermal insulation

Professional Standard - Urban Construction

CJ 26.5-1991 Municipal sewage water quality inspection method Standard gravimetric method for total solids
CJ 26.3-1991 Water quality examination methods for urban sewage - Volumetric method for standard easily sinkable solids
CJ 26.2-1991 Municipal sewage water quality examination method standard gravimetric method for the determination of suspended solids

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 41114-2021 Non-destructive testing―Ultrasonic testing―Specification for a calibration block for phased array testing(PAUT)
GB/T 40336-2021 Non-destructive testing—Leak testing—Calibration of reference leaks for gases

Professional Standard - Commodity Inspection

SN/T 0008-2009 General rules for drafting inspection and quarantine standards of imported solid wastes as raw materials
SN/T 2298.5-2011 Inspection and Quarantine General Standard for Imported Solid Wastes as Raw Materials Part 5: Test Method of Corrosivity
SN/T 1791.8-2018 Rules for inspection and quarantine of imported solid wastes as raw materials Part 8: Waste electric motors
SN/T 2298.2-2009 Inspection and quarantine general standard for imported solid wastes as raw materials—Part 2:Sampling method
SN/T 2298.4-2009 Inspection and quarantine general standard for imported solid wastes as raw materials - Part 4: Inspection of explosive substances
SN/T 2298.1-2009 Inspection and quarantine general standard for imported solid wastes as raw materials—Part 1:Terms and definitions

未注明发布机构

ASTM RR-D34-1003 1988 D4842-Standard Test Method for Determining the Resistance of Solid Wastes to Freezing and Thawing
ASTM RR-D34-1008 1989 D3987-Standard Test Method for Shake Extraction of Solid Waste with Water
ASTM E1316-2024 Standard Terminology for Nondestructive Examinations
DIN EN 1779:1999E Non-destructive testing – Leak testing Criteria for method and technique selection
ASTM RR-D34-1006 1988 D4842-Standard Test Method for Determining the Resistance of Solid Wastes to Freezing and Thawing
ASTM RR-D34-1000 1981 D3987-Standard Test Method for Shake Extraction of Solid Waste with Water
DIN EN ISO 7963 E:2022-02 Non-destructive testing and ultrasonic testing. No. 2 reference block specification (draft)
DIN EN ISO 20486 E:2016-10 Calibration of gas reference leaks for non-destructive testing leak detection (draft)
DIN 19529 E:2015-07 Leaching of solid materials - Batch test for the examination of the leaching behaviour of inorganic and organic substances at a liquid to solid ratio of 2 l/kg

未注明发布机构

DIN EN ISO 20486 E:2016-10 Calibration of gas reference leaks for non-destructive testing leak detection (draft)
ASTM E1316-2024 Standard Terminology for Nondestructive Examinations
DIN 19529 E:2015-07 Leaching of solid materials - Batch test for the examination of the leaching behaviour of inorganic and organic substances at a liquid to solid ratio of 2 l/kg
DIN EN ISO 7963 E:2022-02 Non-destructive testing and ultrasonic testing. No. 2 reference block specification (draft)
DIN EN 1779:1999E Non-destructive testing – Leak testing Criteria for method and technique selection
ASTM RR-D34-1006 1988 D4842-Standard Test Method for Determining the Resistance of Solid Wastes to Freezing and Thawing
ASTM RR-D34-1003 1988 D4842-Standard Test Method for Determining the Resistance of Solid Wastes to Freezing and Thawing
ASTM RR-D34-1000 1981 D3987-Standard Test Method for Shake Extraction of Solid Waste with Water
ASTM RR-D34-1008 1989 D3987-Standard Test Method for Shake Extraction of Solid Waste with Water

Group Standards of the People's Republic of China

T/GAPEC 018-2022 Specification for quality inspection of electric fixed wing UAV inspection system
T/SZBSIA 007-2022 Semiconductor die bonder test specification
T/NMWRJ 001-2023 Technical standards for UAV power transmission and distribution inspection
T/CECS 1335-2023 Standard for testing method of integral thermalirregularities of building envelope by UAV-thermal imager
T/CECS 1080-2022 The construction project is based on the inspection standard of the UAV carrying platform

Professional Standard - Agriculture

第1．1．7章OIE陆生动物诊断试验和疫苗手册-第七版 General standard - Introduction - Examination of sterility and non-contamination of biological materials
GB 7101-2003(XG1-2008) Amendment No. 1 of "Hygienic Standards for Solid Beverages"

Shanxi Provincial Standard of the People's Republic of China

DB14/T 2499-2022 Guidelines for the management and application of reference materials for chemical testing by inspection and testing institutions
DB14/T 3036-2024 Overall framework of the inspection and testing management standard system

国家质量监督检验检疫总局

SN/T 4326-2015 Diagram of standard system of plant inspection and quarantine for import and export

Military Standard of the People's Republic of China-General Armament Department

GJB/J 3348-1998 Calibration procedures for solid propellant smoke signal test systems

Professional Standard - Environmental Protection

HJ 761-2015 Solid waste - Determination of organic matter - Ignition loss method
HJ 1211-2021 Soild waste—Determination of inorganic elements—Wavelength dispersive X-ray fluorescence spectrometry

Professional Standard - Machinery

JB/T 10059-1999 Modeling method for testing machines and non-destructive testing instruments

环境保护部、国家质量监督检验检疫总局

GB 16487.8-2017 Environmental protection control standard for imported solid wastes as raw materials―Waste electric motors

Shanghai Provincial Standard of the People's Republic of China

DB31/T 764-2013 Validation test methods for content of solid waste in inorganic building materials

DIN

DIN 19528:2023 Leaching of solid materials - Percolation method for the joint examination of the leaching behaviour of inorganic and organic substances
DIN EN 12223:2000 Non-destructive testing - Ultrasonic examination - Specification for calibration block No 1
DIN 19529:2023 Leaching of solid materials - Batch test for the examination of the leaching behaviour of inorganic and organic substances at a liquid to solid ratio of 2 l/kg

European Committee for Standardization (CEN)

EN 13192:2001 Non destructive testing - Leak testing - Calibration of reference leaks for gases
EN ISO 7963:2022 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2022)
EN ISO 7963:2010 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006)
CEN/TS 17781:2022 Organic, organo-mineral and inorganic fertilizers - Detection of Escherichia coli
CEN/TS 17804:2022 Organic, organo-mineral and inorganic fertilizers - Detection of Enterocococaceae
FprCEN/TS 17781-2021 Organic, organo-mineral and inorganic fertilizers - Detection of Escherichia coli
FprCEN/TS 17780-2021 Organic, organo-mineral and inorganic fertilizers - Detection of Salmonella spp.
CEN/TS 17780:2022 Organic, organo-mineral and inorganic fertilizers - Detection of Salmonella spp.
EN ISO 23277:2015 Non-destructive testing of welds - Penetrant testing - Acceptance levels (ISO 23277:2015)
CEN/TS 17803:2022 Organic and organo-mineral fertilizers - Detection of specific pathogens

AWS - American Welding Society

A2.4-1998 Standard Symbols for Welding@ Brazing@ and Nondestructive Examination
A2.4-1993 Standard Symbols for Welding@ Brazing and Nondestructive Examination
A2.4-1976 Standard Symbols for Welding@ Brazing@ and Nondestructive Examination
A2.4-1986 STANDARD SYMBOLS FOR WELDING@ BRAZING AND NONDESTRUCTIVE EXAMINATION
A2.4-2007 Standard Symbols for Welding@ Brazing@ and Nondestructive Examination (Sixth Edition)
A2.4/A2.1 SET-1998 Standard Symbols for Welding@ Brazing@ and Nondestructive Examination Book and Charts Set
A2.4/A2.1 SET-2007 Standard Symbols for Welding@ Brazing and Nondestructive Examination Book and Charts Set
A2.4/A2.1 SET-2012 Standard Symbols for Welding@ Brazing and Nondestructive Examination Book and Charts Set

American Welding Society (AWS)

AWS A2.4-1998 Standard Symbols for Welding, Brazing, and Nondestructive Examination
AWS A2.4 SPANISH-2012 Standard Symbols for Welding, Brazing, and Nondestructive Examination (7a Edición)
AWS A2.4-2020 Standard Symbols for Welding, Brazing, and Nondestructive Examination (7a Edición)
AWS A2.4-2012 Standard Symbols for Welding, Brazing, and Nondestructive Examination (7th Edition)

American Society for Testing and Materials (ASTM)

ASTM E543-15 Standard Specification for Agencies Performing Nondestructive Testing
ASTM E543-21 Standard Specification for Agencies Performing Nondestructive Testing
ASTM E543-13 Standard Specification for Agencies Performing Nondestructive Testing
ASTM E543-08a Standard Specification for Agencies Performing Nondestructive Testing
ASTM E543-08 Standard Specification for Agencies Performing Nondestructive Testing
ASTM E543-99 Standard Practice for Agencies Performing Nondestructive Testing
ASTM D6050-97(2003)e1 Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM D6050-97 Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM D6050-21 Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM D6050-09 Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM D6050-09(2016) Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM D6050-97(2003) Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM E1756-01 Standard Test Method for Determination of Total Solids in Biomass
ASTM E1756-95 Standard Test Method for Determination of Total Solids in Biomass
ASTM C1603-10 Standard Test Method for Measurement of Solids in Water
ASTM D6402-99(2009) Standard Test Method for Determing Soluble Solids and Insolubles in Extracts of Vegetable Tanning Materials
ASTM E1359-12 Standard Guide for Evaluating Capabilities of Nondestructive Testing Agencies
ASTM E1316-17a Standard Terminology for Nondestructive Examinations
ASTM E1316-10 Standard Terminology for Nondestructive Examinations
ASTM E1316-21a Standard Terminology for Nondestructive Examinations
ASTM E2060-22 Standard Guide for Use of Coal Combustion Products for Solidification/Stabilization of Inorganic Wastes
ASTM E1316-14e1 Standard Terminology for Nondestructive Examinations
ASTM E1316-21b Standard Terminology for Nondestructive Examinations
ASTM E1316-07 Standard Terminology for Nondestructive Examinations
ASTM E1316-10a Standard Terminology for Nondestructive Examinations
ASTM E1316-15 Standard Terminology for Nondestructive Examinations
ASTM E1316-09 Standard Terminology for Nondestructive Examinations
ASTM E1316-21d Standard Terminology for Nondestructive Examinations
ASTM E1316-20a Standard Terminology for Nondestructive Examinations
ASTM E1316-17 Standard Terminology for Nondestructive Examinations
ASTM E1316-16a Standard Terminology for Nondestructive Examinations
ASTM E1316-18 Standard Terminology for Nondestructive Examinations
ASTM E1316-09a Standard Terminology for Nondestructive Examinations
ASTM E1316-15a Standard Terminology for Nondestructive Examinations
ASTM E1316-16 Standard Terminology for Nondestructive Examinations
ASTM E1316-13a Standard Terminology for Nondestructive Examinations
ASTM E1316-20 Standard Terminology for Nondestructive Examinations
ASTM E1316-21 Standard Terminology for Nondestructive Examinations
ASTM E1316-19a Standard Terminology for Nondestructive Examinations
ASTM E1316-21c Standard Terminology for Nondestructive Examinations
ASTM E1316-18a Standard Terminology for Nondestructive Examinations
ASTM E1316-13 Standard Terminology for Nondestructive Examinations
ASTM E1316-13d Standard Terminology for Nondestructive Examinations
ASTM E1316-22 Standard Terminology for Nondestructive Examinations
ASTM E1316-12 Standard Terminology for Nondestructive Examinations
ASTM E1316-13b Standard Terminology for Nondestructive Examinations
ASTM E1316-13c Standard Terminology for Nondestructive Examinations
ASTM E1316-11a Standard Terminology for Nondestructive Examinations
ASTM E1316-08a Standard Terminology for Nondestructive Examinations
ASTM E1316-08 Standard Terminology for Nondestructive Examinations
ASTM E1316-22a Standard Terminology for Nondestructive Examinations
ASTM E1316-19b Standard Terminology for Nondestructive Examinations
ASTM E1316-19 Standard Terminology for Nondestructive Examinations
ASTM E1212-04 Standard Practice for Quality Management Systems for Nondestructive Testing Agencies
ASTM E1756-24 Standard Test Method for Determination of Total Solids in Biomass
ASTM D1821-95 Standard Test Method for Inorganic Chlorides in Askarels
ASTM C1603-05 Standard Test Method for Measurement of Solids in Water
ASTM C1592/C1592M-09 Standard Guide for Making Quality Nondestructive Assay Measurements
ASTM E1359-09 Standard Guide for Evaluating Capabilities of Nondestructive Testing Agencies
ASTM D4359-90(2012) Standard Test Method for Determining Whether a Material Is a Liquid or a Solid
ASTM E1359-02 Standard Guide for Evaluating Capabilities of Nondestructive Testing Agencies
ASTM D4842-90(2001) Standard Test Method for Determining the Resistance of Solid Wastes to Freezing and Thawing
ASTM E1316-23a Standard Terminology for Nondestructive Examinations
ASTM E1316-10c Standard Terminology for Nondestructive Examinations
ASTM E1316-11 Standard Terminology for Nondestructive Examinations
ASTM D4842-90(1996) Standard Test Method for Determining the Resistance of Solid Wastes to Freezing and Thawing
ASTM E1316-23 Standard Terminology for Nondestructive Examinations
ASTM E1316-24a Standard Terminology for Nondestructive Examinations
ASTM E1316-14 Standard Terminology for Nondestructive Examinations
ASTM E2060-06 Standard Guide for Use of Coal Combustion Products for Solidification/Stabilization of Inorganic Wastes
ASTM E2060-06(2014) Standard Guide for Use of Coal Combustion Products for Solidification/Stabilization of Inorganic Wastes
ASTM E2060-00 Standard Guide for Use of Coal Combustion Products for Solidification/Stabilization of Inorganic Wastes
ASTM E1316-24b Standard Terminology for Nondestructive Examinations
ASTM E1756-08(2020) Standard Test Method for Determination of Total Solids in Biomass
ASTM E1316-24 Standard Terminology for Nondestructive Examinations
ASTM E543-06 Standard Specification for Agencies Performing Nondestructive Testing
ASTM E543-02 Standard Practice for Agencies Performing Nondestructive Testing
ASTM E1359-17(2024) Standard Guide for Auditing and Evaluating Capabilities of Nondestructive Testing Agencies
ASTM E2533-17e1 Standard Guide for Nondestructive Testing of Polymer Matrix Composites Used in Aerospace Applications
ASTM E2533-17 Standard Guide for Nondestructive Testing of Polymer Matrix Composites Used in Aerospace Applications
ASTM E2533-16a Standard Guide for Nondestructive Testing of Polymer Matrix Composites Used in Aerospace Applications
ASTM E1756-08(2015) Standard Test Method for Determination of Total Solids in Biomass
ASTM E1756-08 Standard Test Method for Determination of Total Solids in Biomass
ASTM D3987-12(2020) Standard Practice for Shake Extraction of Solid Waste with Water
ASTM E543-09 Standard Specification for Agencies Performing Nondestructive Testing
ASTM E831-03 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM D5907-18 Standard Test Methods for Filterable Matter (Total Dissolved Solids) and Nonfilterable Matter (Total Suspended Solids) in Water
ASTM C1592/C1592M-21 Standard Guide for Making Quality Nondestructive Assay Measurements
ASTM E1212-12 Standard Practice for Quality Management Systems for Nondestructive Testing Agencies
ASTM D5198-09 Standard Practice for Nitric Acid Digestion of Solid Waste
ASTM C1673-10a(2018) Standard Terminology of C26.10 Nondestructive Assay Methods
ASTM E1212-09 Standard Practice for Quality Management Systems for Nondestructive Testing Agencies
ASTM D6010-96 Standard Practice for Closed Vessel Microwave Solvent Extraction of Organic Compounds from Solid Matrices
ASTM E884-82(1993) Standard Practice for Sampling Airborne Microorganisms at Municipal Solid-Waste Processing Facilities
ASTM D5231-92(1998) Standard Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste
ASTM E1428-15a Standard Test Method for Evaluating the Performance of Antimicrobials in or on Polymeric Solids Against Staining by Streptomyce species (A Pink Stain Organism)
ASTM D5232-92(2003) Standard Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material
ASTM E543-04 Standard Practice for Agencies Performing Nondestructive Testing
ASTM D5231-92(2024) Standard Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste
ASTM D5198-92(1997) Standard Practice for Nitric Acid Digestion of Solid Waste
ASTM E889-82(2023) Standard Test Method for Composition or Purity of a Solid Waste Materials Stream
ASTM E889-82(1996) Standard Test Method for Composition or Purity of a Solid Waste Materials Stream
ASTM F1470-12 Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
ASTM F1470-09 Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
ASTM F1470-02 Standard Guide for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
ASTM E1247-12(2017) Standard Practice for Detecting Fluorescence in Object-Color Specimens by Spectrophotometry
ASTM F1470-01 Standard Guide for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
ASTM D5743-97(2013) Standard Practice for Sampling Single or Multilayered Liquids, With or Without Solids, in Drums or Similar Containers
ASTM D5231-92(2016) Standard Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste
ASTM D5231-92(2003) Standard Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste
ASTM A340-22 Standard Terminology of Symbols and Definitions Relating to Magnetic Testing
ASTM C1207-03 Standard Test Method for Nondestructive Assay of Plutonium in Scrap and Waste by Passive Neutron Coincidence Counting
ASTM E1109-18 Standard Test Method for Determining the Bulk Density of Solid Waste Fractions
ASTM E1109-19 Standard Test Method for Determining the Bulk Density of Solid Waste Fractions
ASTM D5231-92(2008) Standard Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste
ASTM D854-10 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM D5585-95(2001) Standard Table of Body Measurements for Adult Female Misses Figure Type, Sizes 2-20
ASTM C1207-10 Standard Test Method for Nondestructive Assay of Plutonium in Scrap and Waste by Passive Neutron Coincidence Counting
ASTM D5097-90(1996) Standard Test Method for Filter-Retained Solids Content of Polymer Latexes
ASTM B659-90(2008)e1 Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings
ASTM E1316-07b Standard Terminology for Nondestructive Examinations
ASTM E1316-05 Standard Terminology for Nondestructive Testing
ASTM E1316-07a Standard Terminology for Nondestructive Examinations
ASTM C1603-16 Standard Test Method for Measurement of Solids in Water
ASTM C1603-23 Standard Test Method for Measurement of Solids in Water
ASTM D5198-17 Standard Practice for Nitric Acid Digestion of Solid Waste
ASTM C1673-10a Standard Terminology of C26.10 Nondestructive Assay Methods
ASTM E1316-06a Standard Terminology for Nondestructive Examinations
ASTM D4536-96 Standard Test Method for High-Volume Sampling for Solid Particulate Matter and Determination of Particulate Emissions
ASTM D5929-18 Standard Test Method for Determining Biodegradability of Materials Exposed to Source-Separated Organic Municipal Solid Waste Mesophilic Composting Conditions by Respirometry
ASTM E1316-07c Standard Terminology for Nondestructive Examinations
ASTM E1316-10b Standard Terminology for Nondestructive Examinations
ASTM E433-71(2023) Standard Reference Photographs for Liquid Penetrant Inspection
ASTM E1316-06 Standard Terminology for Nondestructive Examinations

American National Standards Institute （ANSI)

ANSI/AWS A2.4:2007 Standard Symbols for Welding, Brazing, and Nondestructive Examination
ANSI/AWS A2.4:2011 Standard Symbols for Welding, Brazing, and Nondestructive Examination
ANSI/AWS A2.4:2012 Standard Symbols for Welding@ Brazing@ and Nondestructive Examination (7th Edition)
ASTM E1316-23b Standard Terminology for Nondestructive Examinations (Standard + Redline PDF Bundle)
ANSI/ASME B18.24a-2006 Part Identifying Number (PIN) Code System Standard for B18 Fastener Products
ANSI/ASME B18.24-2004 Part Identifying Number (PIN) Code System Standard for B18 Fastener Products
ANSI/ASNT CP-189-2011 ASNT Standard for Qualification and Certification of Nondestructive Testing Personnel
BS EN ISO 18134-1:2022 Solid biofuels. Determination of moisture content Reference method (British Standard)

German Institute for Standardization

DIN 19528:2023-07 Leaching of solid materials - Percolation method for the joint examination of the leaching behaviour of inorganic and organic substances
DIN 19529:2015 Leaching of solid materials - Batch test for the examination of the leaching behaviour of inorganic and organic substances at a liquid to solid ratio of 2 l/kg
DIN EN ISO 7963:2023-02 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2022); German version EN ISO 7963:2022
DIN 19529:2009 Leaching of solid materials - Batch test for the examination of the leaching behaviour of inorganic substances at a liquid to solid ratio of 2 l/kg
DIN EN ISO 2400:2013-01 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1 (ISO 2400:2012); German version EN ISO 2400:2012
DIN 19528:2009 Leaching of solid materials - Percolation method for the joint examination of the leaching behaviour of inorganic and organic substances
DIN 19529:2023-07 Leaching of solid materials - Batch test for the examination of the leaching behaviour of inorganic and organic substances at a liquid to solid ratio of 2 l/kg
DIN 19527:2012 Leaching of solid materials - Batch test for the examination of the leaching behaviour of organic substances at a liquid to solid ratio of 2 l/kg
DIN EN ISO 7963:2023 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2022)
DIN EN 15857:2010-05 Non-destructive testing - Acoustic emission - Testing of fibre-reinforced polymers - Specific methodology and general evaluation criteria; German version EN 15857:2010
DIN EN ISO 20486:2018-05 Non-destructive testing - Leak testing - Calibration of reference leaks for gases (ISO 20486:2017); German version EN ISO 20486:2018
DIN EN ISO 20486:2018 Non-destructive testing - Leak testing - Calibration of reference leaks for gases (ISO 20486:2017)
DIN CEN/TS 17804:2022-07 Organic, organo-mineral and inorganic fertilizers - Detection of Enterococcaceae; German version CEN/TS 17804:2022
DIN 1310:1984 Composition of (gaseous, liquid and solid) mixtures; concepts, symbols
DIN 24163-2:1985 Fans; performance testing, standardized test airways
DIN 24163-1:1985 Fans; performance testing, standard characteristics
DIN EN 1779:1999-10 Non-destructive testing - Leak testing - Criteria for the method and technique selection; German version EN 1779:1999
DIN 51903:2012-11 Testing of carbonaceous materials - Determination of ash value - Solid materials
DIN 51904:2012 Testing of carbonaceous materials - Determination of water content - Solid matters
DIN CEN/TS 17781:2022-07 Organic, organo-mineral and inorganic fertilizers - Detection of Escherichia coli; German version CEN/TS 17781:2022
DIN CEN/TS 17803:2022-07 Organic and organo-mineral fertilizers - Detection of specific pathogens; German version CEN/TS 17803:2022

SCC

DIN 19528 E:2023 Draft Document - Leaching of solid materials - Percolation method for the joint examination of the leaching behaviour of inorganic and organic substances
ASTM STP 760-01 Hazardous Solid Waste Testing
DANSK DS/EN ISO 2400:2012 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1
DANSK DS/EN ISO 7963:2010 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2
AWWA JAW6173 Journal AWWA — Detection of Trace Organics in Well Water Near a Solid Waste Landfill
IAPMO/ANSI/CAN Z1167-2023 Standard for Solid Waste Containment Interceptors
DANSK DS/EN 15857:2010 Non-destructive testing - Acoustic emission - Testing of fibre-reinforced polymers - Specific methodology and general evaluation criteria
AENOR UNE-EN 15857:2010 Non-destructive testing - Acoustic emission - Testing of fiber-reinforced polymers - Specific methodology and general evaluation criteria
NS-EN 13192:2001 Non destructive testing — Leak testing — Calibration of reference leaks for gases
NS-EN 12223:1999 Non-destructive testing — Ultrasonic examination — Specification for calibration block No. 1
DANSK DS/EN 12223:2000 Non-destructive testing - Ultrasonic examination - Specification for calibration block No. 1
AENOR UNE-EN ISO 2400:2013 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1 (ISO 2400:2012)
NS-EN ISO 2400:2012 Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 1 (ISO 2400:2012)
AENOR UNE-EN ISO 7963:2011 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006)
DIN 54163 E:2006 Draft Document - Non-destructive testing - Approval of certification bodies for personnel in the field of non-destructive testing
NS-EN ISO 7963:2022 Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 2 (ISO 7963:2022)
NS-EN ISO 7963:2010 Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 2 (ISO 7963:2006)
DIN 19529 E:2015 Draft Document - Leaching of solid materials - Batch test for the examination of the leaching behaviour of inorganic and organic substances at a liquid to solid ratio of 2 l/kg
ITU-T X.677-2020 Identification mechanism for unmanned aerial vehicles using object identifiers
DIN 51750-3 E:2022 Draft Document - Testing of mineral oils - Sampling - Pasty and solid materials
DANSK DS/CEN/TS 17780:2022 Organic, organo-mineral and inorganic fertilizers – Detection of Salmonella spp.
08/30168672 DC BS EN 15857. Non-destructive testing. Acoustic emission. Testing of fibre-reinforced polymers. Specific methodology and general evaluation criteria
SN-CEN/TS 17780:2022 Organic, organo-mineral and inorganic fertilizers - Detection of Salmonella spp.
NS-EN ISO 20486:2018 Non-destructive testing — Leak testing — Calibration of reference leaks for gases (ISO 20486:2017)
DIN EN ISO 7963 E:2010 Draft Document - Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006); German version FprEN ISO 7963:2010
SN-CEN/TS 17781:2022 Organic, organo-mineral and inorganic fertilizers - Detection of Escherichia coli
DANSK DS/CEN/TS 17781:2022 Organic, organo-mineral and inorganic fertilizers – Detection of Escherichia coli
DANSK DS/ISO 9583:2015 Implants for surgery - Non-destructive testing - Liquid penetrant inspection of metallic surgical implants
AWPA E19-15 Standard Method for Determining Preservative Fixation of Inorganic Waterborne Wood Preservatives
AASHTO T 111-1983(2004) Standard Method of Test for Inorganic Matter or Ash in Bituminous Materials
AWPA E19-22 Standard Method for Determining Preservative Fixation of Inorganic Waterborne Wood Preservatives
CAN3-B366.1S1-1985 Supplement no.1-1985 to ACNOR standard CAN3-B366.1-M81 Solid fuel appliances
AWPA E19-16 Standard Method for Determining Preservative Fixation of Inorganic Waterborne Wood Preservatives
AWPA E19-14 Standard Method for Determining Preservative Fixation of Inorganic Waterborne Wood Preservatives
AWPA E19-08 Standard Method for Determining Preservative Fixation of Inorganic Waterborne Wood Preservatives
AWPA E19-04 Standard Method for Determining Preservative Fixation of Inorganic Waterborne Wood Preservatives
DIN EN ISO 2400 E:2011 Draft Document - Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1 (ISO/DIS 2400:2011); German version prEN ISO 2400:2011
DANSK DS/EN 13192:2001 Non destructive testing – Leak testing – Calibration of reference leaks for gases
11/30240176 DC BS EN ISO 2400. Non-destructive testing. Ultrasonic examination. Specification for calibration block No. 1
09/30197002 DC BS ISO 10830. Space systems. Non-destructive testing. Automatic ultrasonic inspection method of graphite ingot for solid rocket motors
NS-EN 1779:1999 Non-destructive testing — Leak testing — Criteria for method and technique selection
DANSK DS/CEN/TS 17804:2022 Organic, organo-mineral and inorganic fertilizers – Detection of Enterocococaceae
SN-CEN/TS 17804:2022 Organic, organo-mineral and inorganic fertilizers - Detection of Enterocococaceae
AENOR UNE-EN 1779:2000 Non-destructive testing - Leak testing - Criteria for method and technique selection
BS PD CEN/TS 17804:2022 Organic, organo-mineral and inorganic fertilizers. Detection of Enterocococaceae
NS-EN 1779:1999+A1:2006 Non-destructive testing — Leak testing — Criteria for method and technique selection
DIN CEN/TS 17780:2022 Organic, organo-mineral and inorganic fertilizers - Detection of Salmonella spp.; German version CEN/TS 17780:2022
DANSK DS/CEN/TS 17803:2022 Organic and organo-mineral fertilizers – Detection of specific pathogens
SN-CEN/TS 17803:2022 Organic and organo-mineral fertilizers - Detection of specific pathogens
DIN CEN/TS 17781:2022 Organic, organo-mineral and inorganic fertilizers - Detection of Escherichia coli; German version CEN/TS 17781:2022
DIN CEN/TS 17804:2022 Organic, organo-mineral and inorganic fertilizers - Detection of Enterococcaceae; German version CEN/TS 17804:2022
BS PD CEN/TS 17803:2022 Organic and organo-mineral fertilizers. Detection of specific pathogens
DIN CEN/TS 17803:2022 Organic and organo-mineral fertilizers - Detection of specific pathogens; German version CEN/TS 17803:2022
DANSK DS/EN 1779:2001 Non-destructive testing - Leak testing - Criteria for method and technique selection

GSO

GSO ISO 18249:2021 Non-destructive testing — Acoustic emission testing — Specific methodology and general evaluation criteria for testing of fibre-reinforced polymers
BH GSO ISO 18249:2022 Non-destructive testing — Acoustic emission testing — Specific methodology and general evaluation criteria for testing of fibre-reinforced polymers
OS GSO ISO 7963:2008 Non-Destructive Testing - Ultrasonic Testing - Specification for Calibration Block No. 2
GSO ISO 7963:2008 Non-Destructive Testing - Ultrasonic Testing - Specification for Calibration Block No. 2
OS GSO ISO 9583:2016 Implants for surgery -- Non-destructive testing -- Liquid penetrant inspection of metallic surgical implants
BH GSO ISO 9583:2017 Implants for surgery -- Non-destructive testing -- Liquid penetrant inspection of metallic surgical implants
GSO ISO 9583:2016 Implants for surgery -- Non-destructive testing -- Liquid penetrant inspection of metallic surgical implants

British Standards Institution (BSI)

24/30477165 DC BS EN ISO 2400 Non-destructive testing - Ultrasonic testing - Specification for standard block No. 1
BS EN ISO 2400:2012 Non-destructive testing. Ultrasonic testing. Specification for calibration block No. 1
BS ISO 18249:2015 Non-destructive testing. Acoustic emission testing. Specific methodology and general evaluation criteria for testing of fibre-reinforced polymers
22/30437356 DC BS EN ISO 7963. Non-destructive testing. Ultrasonic testing. Specification for calibration block No. 2
PD CEN/TS 17804:2022 Organic, organo-mineral and inorganic fertilizers. Detection of Enterocococaceae
BS EN ISO 11666:2011 Non-destructive testing of welds. Ultrasonic testing. Acceptance levels
BS EN 1779:1999(2008) Non - destructive testing — Leak testing — Criteria formethodand technique selection
PD CEN/TS 17803:2022 Organic and organo-mineral fertilizers. Detection of specific pathogens

Institute of Electrical and Electronics Engineers (IEEE)

IEEE 2790-2020 IEEE Standard for Biometric Liveness Detection
IEEE Std 2790-2020 IEEE Standard for Biometric Liveness Detection
IEEE P2790/D4.0, August 2019 IEEE Draft Standard for Biometric Liveness Detection
IEEE PN42.63/D5, September 2022 IEEE Draft Standard for Unmanned Aerial System-Radiation Detection (UAS-RD)
IEEE PN42.63 IEEE Draft Standard for Unmanned Aerial System-Radiation Detection (UAS-RD)

HU-MSZT

MSZ 21861/2-1975 Industrial extract solid testing standards
MSZ 3727/1-1980 Sour cream and cream solids content testing and skim solids content testing
MSZ 3744-1981 Milk solid content detection
MSZ 21853/1-1976 Gas pollutant source detection. common standard
MSZ 10993-1982 Comply with Hungarian Standard No. 5121 Standard Production Pipeline Inspection
MSZ 10998-1982 Detection column. Comply with Hungarian standard No. 5122 production pipe standard
MSZ 3607/1-1971 Canned food solid matter and moisture content testing
MSZ 4310/6-1974 Anti-corrosion testing of welded fixings. General technical standards for optical photography testing

ZA-SANS

SANS 5289:1987 Chlorides in solids and liquids, detection
SANS 1698:2007 Verification standards for the verification of volume-measuring instruments, including commercial standards of volume

KR-KS

KS B ISO 2400-2019 Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 1
KS B 0831-2024 Non-destructive testing — Ultrasonic testing — Standard test blocks
KS B ISO 20486-2023 Non-destructive testing — Leak testing — Calibration of reference leaks for gases

Korean Agency for Technology and Standards (KATS)

KS B ISO 2400:2019 Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 1
KS P ISO 9583-2009(2019) Implants for surgery－Non-destructive testing－Liquid penetrant inspection of metallic surgical implants
KS P ISO 9583-2019 Implants for surgery－Non-destructive testing－Liquid penetrant inspection of metallic surgical implants
KS B ISO 3452-3-2016(2021) Non－destructive testing－Penetrant testing－Part 3：Reference test blocks

Indonesia Standards

SNI ISO 2400:2014 Non-destructive testing - Ultrasonic testing -Specification for calibration block No.1
SNI 06-2413-2002 Test methods for solid matter content in water

Danish Standards Foundation

DS/EN ISO 7963:2010 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2
DS/EN ISO 2400:2012 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1
Standardpakke - Ikke-destruktiv proevning - Penetr Standards Package – Non-destructive testing – Penetrant testing
DS/EN 1779:2002 Non-destructive testing - Leak testing - Criteria for method and technique selection
DS/EN 1779/A1:2004 Non-destructive testing - Leak testing - Criteria for method and technique selection

RU-GOST R

GOST 12113-1983 Brown coals, hard coals, anthracites and hard disperaed organic matter. Method for determination of the reflectance
GOST 12113-1994 Brown coals, hard coals, anthracites, solid dispersed organic matters and carbon materials. Method for determination of reflectance indices
GOST R 56885-2016 Biomass. Determination of total amount of solids by standard method

Association Francaise de Normalisation

NF EN ISO 7963:2022 Essais non destructifs - Contrôle par ultrasons - Spécifications relatives au bloc d'étalonnage no 2
NF A09-461:2002 Non-destructive testing - Leak test - Calibration of gaseous reference leaks.
NF A09-461*NF EN ISO 20486:2018 Non-destructive testing - Leak testing - Calibration of reference leaks for gases
NF EN 15857:2010 Essais non destructifs - Émission acoustique - Essai des polymères renforcés par des fibres - Méthodologie spécifique et critères d'évaluation généraux
NF EN ISO 20486:2018 Non-destructive testing - Leak testing - Calibration of reference gas leaks
NF EN 1779:1999 Non-destructive testing - Leak testing - Criteria for choosing the method and technique
NF EN 1779/A1:2004 Non-destructive testing - Leak testing - Criteria for choosing the method and technique
XP U42-752*XP CEN/TS 17781:2022 Organic, organo-mineral and inorganic fertilizers - Detection of Escherichia coli
XP U42-751*XP CEN/TS 17780:2022 Organic, organo-mineral and inorganic fertilizers - Detection of Salmonella spp.
NF A09-120-3*NF EN ISO 3452-3:2014 Non-destructive testing - Penetrant testing - Part 3 : reference test blocks
XP CEN/TS 17781:2022 Engrais organiques, organo-minéraux et inorganiques - Recherche des Escherichia coli
XP CEN/TS 17803:2022 Engrais organiques et organo-minéraux - Détection d'agents pathogènes spécifiques

TR-TSE

TS 135-1964 STANDARD METHODS OF TEST FOR INORGANIC MATTER OR ASH

U.S. Military Regulations and Norms

ARMY MIL-STD-286 C CHG NOTICE 1-1994 PROPELLANTS, SOLID: SAMPLING, EXAMINATION AND TESTING

International Organization for Standardization (ISO)

ISO 7963:2022 Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 2
ISO 20486:2017 Non-destructive testing - Leak testing - Calibration of reference leaks for gases
ISO 7963:2006 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2

CEN - European Committee for Standardization

EN ISO 20486:2018 Non-destructive testing - Leak testing - Calibration of reference leaks for gases

VN-TCVN

TCVN 5115-2009 Non-destructive testing.Ultrasonic testing.Specification for calibration block No.2
TCVN 7733-2007 Water quality.Effluent standards for leachate of solid waste landfill sites

SE-SIS

SIS MNC 1106-1981 Non-destructive testing - International standards
SIS SS 11 42 51-1982 Non-destructive testing - Ultrasonic testing - Reference test block type FBHP
SIS SS 11 42 54-1982 Non-destructive testing - Ultrasonic testing - Reference test block type RSNV
SIS SS 11 42 50-1982 Non-destructive testing - Ultrasonic testing - Reference test block type FBHN
SIS SS 11 42 52-1982 Non-destructive testing - Ultrasonic testing - Reference test block type FBHV
SIS SS 11 42 53-1982 Non-destructive testing - Ultrasonic testing - Reference test block type CHNV

ES-UNE

UNE-EN ISO 7963:2023 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2022)
UNE-CEN/TS 17780:2022 Organic, organo-mineral and inorganic fertilizers - Detection of Salmonella spp. (Endorsed by Asociación Española de Normalización in May of 2022.)
UNE-CEN/TS 17804:2022 Organic, organo-mineral and inorganic fertilizers - Detection of Enterocococaceae (Endorsed by Asociación Española de Normalización in July of 2022.)
UNE-CEN/TS 17781:2022 Organic, organo-mineral and inorganic fertilizers - Detection of Escherichia coli (Endorsed by Asociación Española de Normalización in May of 2022.)
UNE-CEN/TS 17803:2022 Organic and organo-mineral fertilizers - Detection of specific pathogens (Endorsed by Asociación Española de Normalización in July of 2022.)

AENOR

UNE-EN ISO 7963:2011 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006)
UNE-EN ISO 2400:2013 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1 (ISO 2400:2012)
UNE-EN 1779/A1:2004 Non-destructive testing - Leak testing - Criteria for method and technique selection

Lithuanian Standards Office

LST EN ISO 7963:2010 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006)
LST EN ISO 2400:2012 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1 (ISO 2400:2012)
LST EN 1779-2001 Non-destructive testing - Leak testing - Criteria for method and technique selection
LST EN 1779-2001/A1-2004 Non-destructive testing - Leak testing - Criteria for method and technique selection

Society of Automotive Engineers (SAE)

SAE AS1177-2011 NONDESTRUCTIVE INSPECTION STANDARDS FOR BOLTS AND SCREWS
SAE AS1177A-1993 Nondestructive Inspection Standards for Bolts and Screws
SAE AS1177A-2012 Nondestructive Inspection Standards for Bolts and Screws

US-FCR

FCR 40 CFR PART 258-2014 CRITERIA FOR MUNICIPAL SOLID WASTE LANDFILLS
FCR 40 CFR PART 258-2015 CRITERIA FOR MUNICIPAL SOLID WASTE LANDFILLS
FCR 40 CFR PART 258-2013 CRITERIA FOR MUNICIPAL SOLID WASTE LANDFILLS
FCR 40 CFR PART 257-2014 CRITERIA FOR CLASSIFICATION OF SOLID WASTE DISPOSAL FACILITIES AND PRACTICES
FCR 40 CFR PART 257-2011 CRITERIA FOR CLASSIFICATION OF SOLID WASTE DISPOSAL FACILITIES AND PRACTICES
FCR 40 CFR PART 257-2015 CRITERIA FOR CLASSIFICATION OF SOLID WASTE DISPOSAL FACILITIES AND PRACTICES

SAE - SAE International

SAE AS1177B-2018 Nondestructive Inspection Standards for Bolts and Screws
SAE AS1177-1970 Nondestructive Inspection Standards for Bolts and Screws

GB-REG

REG 40 CFR PART 258-2011 CRITERIA FOR MUNICIPAL SOLID WASTE LANDFILLS
REG 40 CFR PART 257-2011 CRITERIA FOR CLASSIFICATION OF SOLID WASTE DISPOSAL FACILITIES AND PRACTICES

CZ-CSN

CSN 44 1406-1987 Groups of size classification of solid fuels and criteria of checking

YU-JUS

JUS F.S0.100-1979 Testing of textiles. Standard atmosphers and conditbning oftextile
JUS H.P8.513-1986 Testing of pesticides. Rapid determination of vvater contentand suspended solids
JUS C.A7.083-1979 Non-destructive testing - Liquid penetrant testing of welded joints

Standard Association of Australia （SAA）

AS 5013.1:2004 Food microbiology - Examination for specific organisms - Standard plate count

American Society of Mechanical Engineers (ASME)

ASME B18.24-2015 Part Identifying Number (PIN) Code System Standard for B18 Fastener Products
ASME B18.24-2020 Part Identifying Number (PIN) Code System Standard for B18 Fastener Products

International Telecommunication Union (ITU)

ITU-R S.1150-1995 Technical criteria to be used in examinations relating to the probability of harmful interference between frequency assignments in the fixed-satellite service as required in No. S11.32A.1 of the Radio Regulations

CN-STDBOOK

图书 3-9454 Compilation of Standards for Nondestructive Testing Instruments (Part 1)
图书 3-9455 Compilation of Standards for Nondestructive Testing Instruments (Part 2)

ECIA - Electronic Components Industry Association

IS-757-1998 Visual and Mechanical Inspection for Molded SMT Solid Tantalum Capacitors
EIA-757-A-2015 Visual and Mechanical Inspection for Molded SMT Solid Tantalum Capacitors

Electronic Components, Assemblies and Materials Association

ECA EIA-757-A-2015 Visual and Mechanical Inspection for Molded SMT Solid Tantalum Capacitors

PH-BPS

PNS ASTM C1603:2021 Standard Test Method for Measurement of Solids in Water

PL-PKN

PN G04510-1991 Solid mineral fuels. Symbols and coefficients of calculation

CH-SNV

VSM 11105-1971 Standard for the detection and evaluation of insulated conductors in household equipment (SEV Conductor Standard)

Others: