Test press design

Test press design, Total:411 items.

The international standard classification for "Test press design" includes: Buildings for commerce and industry , Compressors and pneumatic machines , Aerospace fluid systems and components , Non-destructive testing of metals , Extraction and processing of petroleum and natural gas , Exploratory and extraction equipment , Nuclear power plants. Safety , Safety of machinery , Energy and heat transfer engineering in general , Rectifiers. Convertors. Stabilized power supply , Software development and system documentation , Earth-moving machinery , IT applications in industry .

The Chinese standard classification for "Test press design" includes: Industrial construction engineering , Compressor and fan , Hydraulic and pneumatic systems and their accessories , Metal nondestructive testing method , Petroleum geology exploration , Petroleum drilling & production equipment and instrument , Nuclear reactor and nuclear island equipment of nuclear power plant , Paper manufacturing machinery in general , Hygiene, safety and labor protection , Technical management , Power semiconductor device and parts , Software engineering , Special equipment for spacecraft manufacturing , Architectural engineering construction machinery , Computer application , Technical Management .

Group Standards of the People's Republic of China

T/CMTBA 1013-2022 Mechnical press—Specification of green-design product assessment
T/CEA 3012-2021 Design, calculation and testing of gearbox for escalators and moving walks
T/CEEIA 401-2019 Mechanical design and verification tests for photovoltaic electrical cabinets
T/FSAS 3-2016 Code for sizing design of compressors for room air conditioners
T/LJXQSCFW 002-2021 Testing methods for performance of applanation tonometers
T/CAMS /CICEIA33-2020 Technical specification for green-design product assessment-Internal combustion engine turbocharger compressor housing
T/CNEA 104.4-2021 PWR pressure boundary components—Equipments design and fabrication— Part 4:Control rod drive mechamism
T/CSAE 303-2023 Test methods for automotive low-voltage wire harness design validation

Military Standard of the People's Republic of China-General Armament Department

GJB 81.2-1985 Test method for basic parameter determination of military bulldozer design and finalization test procedures
GJB 3054-1997 Aircraft hydraulic piping system design and installation requirements
GJB 4516-2002 Design and finalization test procedures for military wheeled hydraulic excavators
GJB 638-1988 Design and installation requirements for aircraft type I and II hydraulic systems
GJB 380.3-1987 Aircraft Hydraulic System Contamination Testing Automatic Particle Counter Calibration
GJB 9316-2018 Design and finalization test procedures for UAV measurement and control system
GJB 638A-1997 Design and installation requirements for aircraft type I and II hydraulic systems

Jilin Provincial Standard of the People's Republic of China

DB22/T 3040-2019 Spinning machine safety design requirements

未注明发布机构

DIN 16002 E:2017-02 Mechanical pressure and temperature gauges - Absolute pressure gauges - Dimensions, Metrology, Requirements and Testing
DIN EN 12645 E:2012-02 Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing
DIN 16003 E:2017-08 Mechanical pressure and temperature gauges - Differential pressure gauges - Dimensions, metrology, requirements and testing
JEDEC JESD82-28A.01-2023 Fully Buffered DIMM Design for Test, Design for Validation (DFx)
DIN EN ISO 13856-3 E:2012-03 Pressure-sensitive protective devices for mechanical safety Part 3: General principles for the design and testing of pressure-sensitive shock absorbers, pressure-sensitive plates and tapes and similar devices (draft)
SAE ARP 813D-2024 Maintainability Recommendations for Aircraft Wheel and Hydraulically Actuated Brake Design
DIN 16001 E:2016-04 Mechanical pressure and temperature gauges - High pressure gauges - Dimensions, Metrology, Requirements and Testing

Professional Standard - Chemical Industry

HG/T 20673-2005（条文说明） Architectural Design Regulations for Compressor Plants
HG/T 20554-1993（条文说明） Piston compressor foundation design regulations
HG/T 20673-2005 Specification for structural design of compression house
HG/T 20555-2006 Design regulation for centrifugal compressor foundation
HG/T 20555-2023 Standard for design of centrifugal compressor foundation
HG/T 20554-1993 Specification for Basic Design of Piston Compressors
HG/T 20555-1993（条文说明） Centrifugal compressor foundation design regulations
HG/T 20555-1993 Centrifugal compressor foundation design regulations

Professional Standard - Aviation

HB 7471-1996 Design and installation requirements of civil aircraft hydraulic system
HB 20059-2011 Centrifugal compressor design requirement of aero engine
HB 6755-1993 Aircraft hydraulic piping system design and installation requirements
HB 8598-2021 Design requirements for semi-model of aircraft low-speed pressurized wind tunnel high Reynolds number test
HB 5931.3-1986 Aircraft Hydraulic System Contamination Testing Automatic Particle Counter Calibration
HB 5949-1986 Requirements for Design and Installation of Aircraft Type I and Type II Hydraulic System
HB 7471-2013 Design and installation requirements of civil aircraft hydraulic system
HB/Z 300-1997 Design Guideline on Aircraft Hydraulic Power Conversion Device
HBJ 11-1998 Code for design of aero-engine test bench
HB 8601-2021 Full model design requirements for aircraft low-speed pressurized wind tunnel high Reynolds number tests
HB 7799-2006 Requirements of hydraulic system fluid sampling position design for aircraft
HB 8543-2018 Design requirement for airborne vibration-cylinder pressure sensor

Professional Standard - Energy

NB/T 10341.4-2023 Design Specifications for Hoists in Hydropower Projects Part 4: Design Specifications for Hydraulic Hoists
NB/T 47013.14-2016 Nondestructive testing of pressure equipments Part 14: X-ray Computed radiographic testing
NB/T 20287-2014 Design and fabrication rules for refueling machine of PWR nuclear power plants
NB/T 35020-2013 Design Specifications for Hydraulic Hoist in Hydropower and Water Resources Projects
NB/T 47013.14-2023 Nondestructive testing of pressure equipments - Part 14: X-ray computed radiographic testing

国家能源局

NB/T 10038-2017 Specifications of mini-frac design and evaluation for coalbed methane well
SY/T 6909-2019 Test equipment for petroleum pressure gauge

Professional Standard - Petroleum

SY/T 6909-2012 Test equipment for petroleum electronic pressure gauge
SY/T 5980-1999 The design standard for testing exploring well
SY/T 7085-2016 Design calculations for pressure-containing equipment

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 16702-2019 Design code for mechanical components in nuclear island of pressurized water reactor nuclear power plants

Professional Standard - Light Industry

QB/T 2070-1994 Design Specification for Cast Iron Press Roller for Paper Machine

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 50454-2008 Code for design of aero-engine test cell
GB/T 15532-2008 Specification of computer software testing
GB/T 15532-1995 Computer software unit testing
GB/T 43534-2023 Design and testing methods for AC side impedance of voltage source converter based high voltage direct current（VSC-HVDC） transmission
GB/T 17454.1-2008 Safety of machinery - Pressure - sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors
GB 50174-1993 Desing Code for Electronic Computer Room
GB/T 17454.2-2008 Safety of machinery - Pressure-sensitive protective devices - Part 2: General principles for the design and testing of pressure-sensitive edges and pressure-sensitive bars
GB/T 26921-2011 The guide of design optimization for motor systems (fans, pumps, air compressors)
GB/T 17454.1-1998 Safety of machinery--Pressure sensitive protective device--Part 1: General principles for the design and testing of pressure sensing mats and pressure sensing floors
GB/T 16702-1996 Design rules for mechanical components of PWR nuclear islands
GB 50454-2020 Standard for design of aero-engine test cell

Professional Standard - Construction Industry

JG/T 5076.1-1996 Design standard for the isolating system of the vibratory rollers

Professional Standard - Petrochemical Industry

SH/T 3199-2018 Design specification for compressor control system in petrochemical industry
SH 3091-1998（条文说明） Code for foundation design of petrochemical compressors
SH/T 3091-2012 Petro-chemical design specification for compressor foundation
SH 3091-1998 Petrol-chemical design specification for compressor foundation

Professional Standard - Aerospace

QJ 1876-1990 842工程

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 17454.2-2017 Safety of machinery―Pressure-sensitive protective devices―Part 2:General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars
GB/T 17454.1-2017 Safety of machinery―Pressure-sensitive protective devices―Part 1:General principles for design and testing of pressure-sensitive mats and pressure sensitive floors

Professional Standard - Nuclear Industry

EJ/T 629-2001 Presurized water reactors fuel assembly mechanical design and evaluation
EJ/T 629-1992 Mechanical Design and Evaluation of PWR Fuel Assembly

Shaanxi Provincial Standard of the People's Republic of China

DB6101/T 3108-2021 Optimized design process for industrial centrifugal compressors

Professional Standard - Recommended Standards for Engineering Construction

CECS 75-1995 Belt filter press sludge dewatering design specification (with explanation)

未注明发布机构

DIN EN ISO 13856-3 E:2012-03 Pressure-sensitive protective devices for mechanical safety Part 3: General principles for the design and testing of pressure-sensitive shock absorbers, pressure-sensitive plates and tapes and similar devices (draft)
JEDEC JESD82-28A.01-2023 Fully Buffered DIMM Design for Test, Design for Validation (DFx)
DIN 16001 E:2016-04 Mechanical pressure and temperature gauges - High pressure gauges - Dimensions, Metrology, Requirements and Testing
SAE ARP 813D-2024 Maintainability Recommendations for Aircraft Wheel and Hydraulically Actuated Brake Design
DIN 16002 E:2017-02 Mechanical pressure and temperature gauges - Absolute pressure gauges - Dimensions, Metrology, Requirements and Testing
DIN EN 12645 E:2012-02 Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing
DIN 16003 E:2017-08 Mechanical pressure and temperature gauges - Differential pressure gauges - Dimensions, metrology, requirements and testing

Professional Standard-Ships

CB 1360-2002 Test specification of computer software

Professional Standard - Electron

SJ 2534.2-1985 Test procedures for antennas-Antenna-range design

AT-ON

ONORM M 7305-1986 Cylindrical furnaces under external pressure; design, testing
ONORM L 5262-1985 Milking machines; testing; testing devices, testing aids and fest method

Society of Automotive Engineers (SAE)

SAE ARP4904-1994(R2008) Capability Guidelines for Computer Controlled Test Equipment for Hydraulic Components
SAE ARP4904-2008 Capability Guidelines for Computer Controlled Test Equipment for Hydraulic Components
SAE ARP4946A-2021 Recommended Design and Test Requirements for Hydraulic Check Valves
SAE J1097-2001 Hydraulic Excavator Lift Capacity Calculation and Test Procedure
SAE AIR1904A-2000 TIRE SPRAY SUPPRESSION - AIRPLANE Design Consideration and Testing for
SAE ARP7212-2022 Recommended Design and Test Requirements for Hydraulic Flow Regulators
SAE ARP4087B-2006 Wing Inspection Lights - Design Criteria
SAE TS103-2-2004 TS103 Recommendations for Design Considerations for Aircraft Hydraulic Systems
SAE J277-2014 Maintenance of Design Voltage - Snowmobile Electrical Systems
SAE J277-2010 Maintenance of Design Voltage Snowmobile Electrical Systems
SAE ARP813C-2019 Maintainability Recommendations for Aircraft Wheel and Hydraulically Actuated Brake Design
SAE AIR4989-1996 DESIGN CONSIDERATIONS FOR ENCLOSED TURBOSHAFT ENGINE TEST CELLS
SAE J/ISO 5011-2002 Inlet air cleaning equipment for internal combustion engines and compressors Performance testing See also ISO 5011
SAE AS5440A-2011 Hydraulic Systems, Military Aircraft, Design and Installation, Requirements for
SAE ARP920-1968 DESIGN AND INSTALLATION OF PITOT-STATIC SYSTEMS FOR TRANSPORT AIRCRAFT

Japanese Industrial Standards Committee (JISC)

JIS B 9717-1:2011 Safety of machinery -- Pressure-sensitive protective devices -- Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors
JIS B 9656:2005 Design rules for safety and sanitation of noodle making machinery
JIS B 6402:1997 Mechanical power presses -- Testing of the accuracy
JIS B 9656:1990 Design rules for safety and sanitation of noodle making machinery
JIS B 8606:2021 Testing of refrigerant compressors
JIS B 8606:1998 Testing of refrigerant compressors

SCC

BS EN 1760-1:1998 Safety of machinery. Pressure sensitive protective devices. General principles for the design and testing of pressure sensitive mats and pressure sensitive floors
AENOR UNE-EN 13001-3-6+A1:2022 Cranes. General design. Part 3-6: Limit states and suitability test of machinery. Hydraulic cylinders.
AENOR UNE-EN 13001-3-6:2018 Cranes. General design. Part 3-6: Limit states and fitness testing of machinery. Hydraulic cylinders.
DANSK DS/EN ISO 13856-2:2013 Safety of machinery - Pressure-sensitive protective devices - Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars
UNE-EN 1760-1:1998 ERRATUM SAFETY OF MACHINERY. PRESSURE SENSITIVE PROTECTIVE DEVICES. PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS.
UNE-EN 1760-1:1998 SAFETY OF MACHINERY. PRESSURE SENSITIVE PROTECTIVE DEVICES. PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS.
DANSK DS/EN ISO 13856-1:2013 Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors
NS-EN 1760-1:1997 Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors
UNE-EN 1760-2:2001+A1:2009 Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars
UNE-EN 1760-1:1998+A1:2009 Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors
DIN 16001 E:2016 Draft Document - Mechanical pressure and temperature gauges - High pressure gauges - Dimensions, Metrology, Requirements and Testing
BS ISO 5011:2000 Inlet air cleaning equipment for internal combustion engines and compressors. Performance testing
DIN 16003 E:2017 Draft Document - Mechanical pressure and temperature gauges - Differential pressure gauges - Dimensions, metrology, requirements and testing
BS 4G 178-1:1984 Crimped joints for aircraft electrical cables and wires-Specification for design requirements (including tests) for components and tools
NS-EN ISO 13856-2:2013 Safety of machinery — Pressure-sensitive protective devices — Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars (ISO 13856-2:2013)
AENOR UNE-EN ISO 13856-1:2013 Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors (ISO 13856-1:2013)
NS-EN ISO 13856-1:2013 Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors (ISO 13856-1:2013)
AENOR UNE-EN ISO 13856-2:2013 Safety of machinery - Pressure-sensitive protective devices - Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars (ISO 13856-2:2013)
BS EN 286-1:1991 Simple unfired pressure vessels designed to contain air or nitrogen-Design, manufacture and testing
CEI EN 61180:2017 High-voltage test techniques for low voltage equipment - Definitions, test and procedure requirements, test equipment
11/30231451 DC BS EN ISO 13856-1. Safety of machinery. Pressure-sensitive protective devices. Part 1. General principles for design and testing of pressuresensitive mats and pressure-sensitive floors
11/30239643 DC BS EN ISO 13856-2. Safety of machinery. Pressure-sensitive protective devices. Part 2. General principles for the design and testing of pressure- sensitive edges and pressure- sensitive bars
DANSK DS/EN 61180:2016 High-voltage test techniques for low-voltage equipment – Definitions, test and procedure requirements, test equipment
AENOR UNE-EN 61180:2017 High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment
DANSK DS/EN 1595:1997 Pressure equipment made from borosilicate glass 3.3 - General rules for design, manufacture and testing
NS-EN 1760-1:1997+A1:2009 Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors
DIN EN 61180 E:2013 Draft Document - High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment
CEI 56-18:2000 Equipment reliability testing - Part 2: Design of test cycles
DANSK DS/EN 13923:2005 Filament-wound FRP pressure vessels - Materials, design, manufacturing and testing
DIN EN ISO 13856-2 E:2011 Draft Document - Safety of machinery - Pressure-sensitive protective devices - Part 2: General principles for the design and testing of pressure-sensitive edges and pressure-sensitive bars (ISO/DIS 13856-2:2011); German version prEN ISO 13856-2:2011
AENOR UNE-EN 13923:2006 Filament-wound FRP pressure vessels - Materials, design, manufacturing and testing
DIN EN ISO 13856-1 E:2011 Draft Document - Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for the design and testing of pressure-sensitive mats and pressure-sensitive floors (ISO/DIS 13856-1:2011); German version prEN ISO 13856-1:2011
UNE-EN 1760-2:2001 Safety of machinery - Pressure sensitive protective devices - Part 2: General principal for the design and testing of pressure sensitive edges and pressure sensitive bars.
NS-EN 13923:2005 Filament-wound FRP pressure vessels — Materials, design, manufacturing and testing
NS-EN 12645:1998 Pressure gauges — Apparatus for inspection of pressure and/or inflation of tyres for motor vehicles — Metrology, requirements and testing
CSA B167-2008(R2014) Overhead travelling cranes — Design, inspection, testing, maintenance, and safe operation
CSA B167-2008(R2015) Overhead travelling cranes - Design, inspection, testing, maintenance, and safe operation
NS-EN 289:1993 Rubber and plastics machinery — Compression and transfer moulding presses — Safety requirements for the design
BS EN 289:1994 Rubber and plastics machinery. Compression and transfer moulding presses. Safety requirements for the design
ASTM STP 1274-96 Composite Materials - Testing & Design - 12th Volume
NS-EN 842:1996+A1:2008 Safety of machinery — Visual danger signals — General requirements, design and testing
SAE ARP813D-2024 Maintainability Recommendations for Aircraft Wheel and Hydraulically Actuated Brake Design
AENOR UNE-EN 842+A1:2008 Safety of machinery - Visual danger signals - General requirements, design and testing
BS 2782-3 METHOD 365B:1981 Methods of testing plastics. Mechanical properties-Determination of indentation hardness by means of a durometer (Shore hardness)
CSA O452.1-1994(R2001) Design Rated OSB: Test Methods
NS-EN 842:1996 Safety of machinery — Visual danger signals — General requirements, design and testing
DANSK DS/EN ISO 13856-3:2013 Safety of machinery - Pressure-sensitive protective devices - Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices
UNE-EN 842:1997 SAFETY OF MACHINERY. VISUAL DANGER SIGNALS. GENERAL REQUIREMENTS, DESIGN AND TESTING.
BS DD ENV 1997-2:2000 Eurocode 7. Geotechnical design-Design assisted by laboratory testing

American Welding Society (AWS)

WRC 038:1957 Proof-Testing Pressure Vessels Designed for Internal Pressure
WRC 414:1996 A New Design Criterion Based on Pressure Testing of Torispherical Heads

WRC - Welding Research Council

BULLETIN 38-1957 PROOF-TESTING PRESSURE VESSELS DESIGNED FOR INTERNAL PRESSURE
BULLETIN 414-1996 A NEW DESIGN CRITERION BASED ON PRESSURE TESTING OF TORISPHERICAL HEADS

CZ-CSN

CSN 27 3705-1992 Ski lifts. Desing, testing and service
CSN 69 0010-4.27-1995 Stationary pressure vessels. Technical rules. Design. Determination of atlowable pressure by pressure testing.
CSN 22 8307-1970 Dies for horizontal forging presses. Design rules
CSN 22 8306-1970 Dies for vertical forging presses. Instructions for design
CSN 22 8309-1970 Dies for spindle presses. Design rules
CSN 69 0010 Cast.4.24-1989 Stationary pressure vessels. Techni- al rules. Design. Uniform presenting f pressure vessels calculation made y computers
CSN 10 5032-1974 Testing of screw compressors
CSN 10 5031-1972 Testing of piston compressora
CSN 10 5035-1980 Testing of turbo compressors
CSN 13 7519-1973 Pressure gauge testing three-way welding-on valves. Np 100
CSN 36 9307-1982 Electronic Computers Method of tests.
CSN 27 3705 Z1-1994 Design, build, test and run
CSN 21 0380-1974 Forming machines. Testing methods for double-acting crank presses, toggle stamping presses and press brakes

SE-SIS

SIS SS 428 91 05-1982 Portable single pole voltage testers for 3,6 - 420 kV h/g hes t system voltage - Design and testing
SIS SS 428 91 05-1985 Portable single po/e voltage testers for 3,6 - 420 kV highest system voltage - Design and testing
SIS SS-ISO 5011:1991 Inlet air cleaning equipment for internal combustion engines and compressors — Performance testing
SIS SS 428 91 06-1982 Portable two-pole voltage testers for 110-440 V a.c. and de. - Design and testing
SIS SS 436 21 31-1980 Main distribution boards — Design and testing
SIS SS-EN 286-1-1991 Simple unfired pressure vessels designed to contain air or nitrogen — Part 1: Design, manufacture and testing
SIS SS 428 91 11-1985 Earthing equipment with lance-shaped devices for a.c.-installations 3,6 - 36 kV - Design and testing

PL-PKN

PN S76008-1990 Measuring instruments for motor vehicles and tractors Manometers Re?uirements and test
PN H54559-1990 Foundry machinery and plant Machines for pressure die casting Designing safety requirements
PN M43102-1966 Compressors ethods of ?es?
PN T05124-1986 Electromechanical components for electronic equipment; basie testing procedures and measuring methods Dynamie stress tests

SAE - SAE International

SAE AIR6189-2017 Design@ Calibration@ and Test Methods for Turbine Engine Icing Test Facilities
SAE ARP4904A-2014 Capability Guidelines for Computer Controlled Test Equipment for Hydraulic Components
SAE ARP4904-1994 Capability Guidelines for Computer Controlled Test Equipment for Hydraulic Components
SAE J1097-1988 Hydraulic Excavator Lift Capacity Calculation and Test Procedure@ Standard
SAE J1097-2005 Hydraulic Excavator Lift Capacity Calculation and Test Procedure (Reissued)
SAE J1097-1975 Hydraulic Excavator Lift Capacity Rating
SAE J1097-2008 Hydraulic Excavator Lift Capacity Calculation and Test Procedure
SAE AIR1904A-1997 Tire Spray Suppression - Airplane Design Consideration and Testing for
SAE AIR1904-1985 Tire Spray Suppression - Airplane Design Consideration and Testing for
SAE ARP4727A-2004 Gland Design@ Computation of Seal Squeeze and Gland Volume
SAE ARP4727-1995 Gland Design@ Computation of Seal Squeeze and Gland Volume

Aeronautical Radio Inc.

ARINC 604-1-1988 Guidance for Design and Use of Built-In Test Equipment, 1985 (Includes Supplement 1)
ARINC 604-1 BOOK-1988 Guidance for Design and Use of Built-In Test Equipment 1985; Includes Supplement 1
ARINC 602A-2 ITEM 4.0 Test Equipment Classification
ARINC 608A ITEM 4.0-1993 Test System Design Guidelines
ARINC 404A CHAP 2-1974 ATR System Mechanical Design
ARINC 608A ITEM 4.0 Test System Design Guidelines
ARINC 701-1 ITEM 9.0 BITE
ARINC 706-4 ITEM 4.0 Computer Unit Design
ARINC 743A-4 ITEM 7.0 BITE
ARINC 706-4 ITEM 4.0-1988 Computer Unit Design

DE-GPVA

AD 2000-Merkblatt HP1-2012 Manufacture and testing of pressure vessels.Design and construction
AD 2000-Merkblatt HP1-2009 Manufacture and testing of pressure vessels.Design and construction
AD 2000-Merkblatt HP1-2014 Manufacture and testing of pressure vessels.Design and construction
AD 2000-Merkblatt S5-2009 Special cases.Calculation of pressure vessels.Experimental design method
AD 2000-Merkblatt HP511-2010 Manufacture and testing of pressure vessels.Design examination
AD 2000-Merkblatt B0-2014 Design of pressure vessels

GSO

GSO ISO 13856-1:2013 Safety of machinery -- Pressure-sensitive protective devices -- Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors
OS GSO ISO 13856-2:2013 Safety of machinery -- Pressure-sensitive protective devices -- Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars
OS GSO ISO 13856-1:2013 Safety of machinery -- Pressure-sensitive protective devices -- Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors
BH GSO ISO 5011:2023 Inlet air cleaning equipment for internal combustion engines and compressors — Performance testing
GSO ISO 5011:2022 Inlet air cleaning equipment for internal combustion engines and compressors — Performance testing
GSO ISO 13856-2:2013 Safety of machinery -- Pressure-sensitive protective devices -- Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars
GSO IEC 61180-2:2014 High-voltage test techniques for low-voltage equipment - Part 2: Test equipment
BH GSO IEC 61180:2022 High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment
GSO IEC 61180:2021 High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment
GSO OIML R145-2:2021 Ophthalmic instruments – Impression and applanation tonometers – Part 2 – Test methods
BH GSO OIML R145-2:2022 Ophthalmic instruments – Impression and applanation tonometers – Part 2 – Test methods
GSO IEC 60605-2:2014 Equipment reliability testing - Part 2: Design of test cycles
OS GSO IEC 60605-2:2014 Equipment reliability testing - Part 2: Design of test cycles
GSO ISO 9662:2016 Aircraft equipment -- Environmental and operating conditions for airborne equipment -- Humidity, temperature and pressure tests
GSO ISO 917:2013 Testing of refrigerant compressors
OS GSO ISO 9662:2016 Aircraft equipment -- Environmental and operating conditions for airborne equipment -- Humidity, temperature and pressure tests
GSO OIML R145-3:2021 Ophthalmic instruments – Impression and applanation tonometers – Part 3 – Test report format
BH GSO ISO 9662:2017 Aircraft equipment -- Environmental and operating conditions for airborne equipment -- Humidity, temperature and pressure tests
BH GSO IEC 60605-2:2016 Equipment reliability testing - Part 2: Design of test cycles
OS GSO 1641:2002 Calibration and test procedures for barometers
OS GSO EN 12645:2009 Pressure gauges-Apparatus for inspection of pressure and/ or inflation of tyres for motor vehicles-metrology, requirements and testing

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE C37.41 CORR 1-2017 Design Tests for High-Voltage (>1000 V) Fuses and Accessories

German Institute for Standardization

DIN 16001:2017 Mechanical pressure and temperature gauges - High pressure gauges - Dimensions, Metrology, Requirements and Testing
DIN EN ISO 13856-1:2013-08 Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for the design and testing of pressure-sensitive mats and pressure-sensitive floors (ISO 13856-1:2013); German version EN ISO 13856-1:2013
DIN EN ISO 13856-2:2013-08 Safety of machinery - Pressure-sensitive protective devices - Part 2: General principles for the design and testing of pressure-sensitive edges and pressure-sensitive bars (ISO 13856-2:2013); German version EN ISO 13856-2:2013
DIN 16003:2018-04 Mechanical pressure and temperature gauges - Differential pressure gauges - Dimensions, metrology, requirements and testing
DIN 16001:2017-04 Mechanical pressure and temperature gauges - High pressure gauges - Dimensions, Metrology, Requirements and Testing
DIN 16002:2017 Mechanical pressure and temperature gauges - Absolute pressure gauges - Dimensions, Metrology, Requirements and Testing
DIN 16002:2017-07 Mechanical pressure and temperature gauges - Absolute pressure gauges - Dimensions, Metrology, Requirements and Testing
DIN EN 1474-1:2009 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 1: Design and testing of transfer arms; German version EN 1474-1:2008
DIN EN 1595:1997 Pressure equipment made from borosilicate glass 3.3 - General rules for design, manufacture and testing
DIN EN 13923:2006-02 Filament-wound FRP pressure vessels - Materials, design, manufacturing and testing; German version EN 13923:2005
DIN EN 12101-13:2022-11 Smoke and heat control systems - Part 13: Pressure differential systems (PDS) - Design and calculation methods, installation, acceptance testing, routine testing and maintenance; German Version EN 12101-13:2022
DIN EN ISO 13856-3:2013-12 Safety of machinery - Pressure-sensitive protective devices - Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices (ISO 13856-3:2013); German version EN ISO 13856-3:2013
DIN EN 842:2009-01 Safety of machinery - Visual danger signals - General requirements, design and testing; German version EN 842:1996+A1:2008 / Note: DIN EN 842 (1996-08) remains valid alongside this standard until 2009-12-28.
DIN EN 12101-13:2020 Smoke and heat control systems - Part 13: Pressure differential systems (PDS) - Design and calculation methods, acceptance testing, maintenance and routine testing of installation; German and English version prEN 12101-13:2020

DIN

DIN EN 12645:2014 Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing
DIN EN 1760-1:1997 Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for the design and testing of pressure-sensitive mats and pressure-sensitive floors

British Standards Institution (BSI)

BS EN 1760-2:2001+A1:2009 Safety of machinery — Pressure sensitive protective devices — Part 2 : General principles for the design and testing of pressure sensitive edges and pressure sensitive bars
BS EN 13923:2005 Filament-wound FRP pressure vessels - Materials, design, manufacturing and testing
BS ISO 2678:1985 Environmental tests for aircraft equipment. Insulation resistance and high voltage tests for electrical equipment
24/30470353 DC BS ISO 5011 Inlet air cleaning equipment for internal combustion engines and compressors - Performance testing
BS EN 13923:2006 Filament-wound FRP pressure vessels - Materials, design, manufacturing and testing
BS EN 1760-2:2001 Safety of machinery - Pressure sensitive protective devices - General principles for the design and testing of pressure sensitive edges and pressure sensitive bars
BS EN 1760-2+A1:2001 Safety of machinery - Pressure sensitive protective devices - General principles for the design and testing of pressure sensitive edges and pressure sensitive bars
BS EN 1060-3:1997 Non-invasive sphygmomanometers - Supplementary requirements for electro-mechanical blood pressure measuring systems
BS EN 1060-3:1997+A2:2009 Non-invasive sphygmomanometers - Supplementary requirements for electro-mechanical blood pressure measuring systems
BS ISO 5011:2014+A1:2018 Inlet air cleaning equipment for internal combustion engines and compressors. Performance testing
BS ISO 5011:2020 Inlet air cleaning equipment for internal combustion engines and compressors. Performance testing
19/30402908 DC BS EN 16603-20-01. Space engineering. Multipaction, design and test
BS EN IEC 62052-11:2021+A11:2022 Electricity metering equipment. General requirements, tests and test conditions - Metering equipment
BS EN IEC 62052-11:2021+A12:2024 Electricity metering equipment. General requirements, tests and test conditions - Metering equipment
BS EN ISO 13856-3:2013 Safety of machinery. Pressure-sensitive protective devices. General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices
BS EN 12645:2014 Tyre pressure measuring instruments. Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles. Metrology, requirements and testing
BS EN ISO 13856-2:2013 Safety of machinery. Pressure-sensitive protective devices. General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars
BS EN ISO 13856-1:2013 Safety of machinery. Pressure-sensitive protective devices. General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors
BS EN 12645:1999 Pressure gauges - Apparatus for inspection of pressure and/or inflation of tyres for motor vehicles - Metrology, requirements and testing
BS G 259:1996 Aircraft equipment. Environmental and operating conditions for airborne equipment. Humidity, temperature and pressure tests
19/30371635 DC BS ISO 5011. Inlet air cleaning equipment for internal combustion engines and compressors. Performance testing
BS EN 1760-3+A1:2004 Safety of machinery - Pressure sensitive protective devices - General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices
BS EN 1760-3:2004 Safety of machinery - Pressure sensitive protective devices - General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices
BS EN 457:1992(1998) Safety ofmachinery — Auditory danger signals — General requirements, design and testing
BS 5G 178-1:1993(1999) Crimped joints for aircraft electrical cables and wires — Part 1 : Specification for design requirements (including tests) for components and tools
BS 5772-4:1979 Specification for electromechanical components for electronic equipment: basic testing procedures and measuring methods. Dynamic stress tests
BS EN ISO 22476-5:2023 Geotechnical investigation and testing. Field testing - Prebored pressuremeter test

RU-GOST R

GOST EN 1760-1-2004 Safety of machinery. Pressure sensitive protective devices. Part 1. General principles for the design and testing of pressure sensitive mats and pressure sensitive floors
GOST 25.602-1980 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for compression properties at normal, elevated and low temperatures
GOST R 51959.2-2002 Non-invasive sphygmomanometers (measuring devices of arterial pressure). Part 2. Supplementary requirements for mechanical sphygmomanometers

Lithuanian Standards Office

LST EN 1760-1-2000+A1-2009 Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors
LST EN 1760-2-2002+A1-2009 Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars
LST EN 13923-2006 Filament-wound FRP pressure vessels - Materials, design, manufacturing and testing
LST EN 1595-2003 Pressure equipment made from borosilicate glass 3.3 - General rules for design, manufacture and testing
LST EN 1760-3-2004+A1-2009 Safety of machinery - Pressure sensitive protective devices - Part 3: General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices
LST EN 842-1999+A1-2009 Safety of machinery - Visual danger signals - General requirements, design and testing
LST EN 61180-2-2001 High-voltage test techniques for low-voltage equipment. Part 2: Test equipment (IEC 61180-2:1994)

Korean Agency for Technology and Standards (KATS)

KS W 9001-2023 Unmanned aircraft systems — Part 1:Design and Testing for UAV
KS W 2924-1984(2009) HYDRAULIC SYSTEMS, AIRCRAFT, TYPE I, AND II, DESIGN AND INSTALLATION REQUIREMENTS FOR
KS B 6361-2017 Methods of A-weighted sound pressure level measurement for fans, compressors
KS R ISO 5011-2023 Inlet air cleaning equipment for internal combustion engines and compressors — Performance testing
KS B 4304-1993 Mechanical presses-Methods of measurement of A-weighted sound pressure level
KS A 1642-1995 Mechanical-shock fragility testing methods of products for packaging design
KS T 1332-2022 Mechanical-shock fragility testing methods of products for packaging design
KS C IEC 61180:2020 High-voltage test techniques for low-voltage equipment —Definitions, test and procedure requirements, test equipment
KS R ISO 5011:2018 Inlet air cleaning equipment for internal combustion engines and compressors — Performance testing
KS C IEC 61180-2-2006(2016) High-voltage test techniques for low-voltage equipment — Part 2：Test equipment
KS T 1332-2012(2017) Mechanical-shock fragility testing methods of products for packaging design
KS W 9001-2018 Unmanned aircraft systems — Part 1:Design and Testing for UAV
KS A 4446-2006 Measuring devices for X－ray tube voltage
KS A IEC 60605-2:2002 Equipment reliability testing-Part 2:Design of test cycles
KS R ISO 5011:2008 Inlet air cleaning equipment for internal combustion engines and compressors－Performance testing
KS A 5606-2006 Design of durability test for mechanical components
KS A 5606-2006(2022) Design of durability test for mechanical components
KS B ISO 13856-1-2021 Safety of machinery－Pressure-sensitive protective devices－Part 1：General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors
KS W ISO 9662-2023 Aircraft equipment－Environmental and operating conditions for airborne equipment－Humidity, temperature and pressure tests
KS A IEC 60605-2-2022 Equipment reliability testing－Part 2：Design of test cycles
KS B ISO 13856-2-2016(2021) Safety of machinery－Pressure-sensitive protective devices－Part 2：General principles for the design and testing of pressure-sensitive edges and pressure-sensitive bars
KS B 4060-2014 Test code for performance and accuracy of hydraulic presses
KS B 4060-1986 Test code for performance and accuracy of hydraulic presses
KS B ISO 13856-2-2021 Safety of machinery－Pressure-sensitive protective devices－Part 2：General principles for the design and testing of pressure-sensitive edges and pressure-sensitive bars
KS B ISO 13856-1-2016(2021) Safety of machinery－Pressure-sensitive protective devices－Part 1：General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors
KS B 4060-1975 Test Code for Performance and Accuracy of Hydraulic Presses
KS B 6365-1987 Performance test method of refrigerant compressors
KS B 6365-2018 Performance test method of refrigerant compressors
KS B 6365-2023 Performance test method of refrigerant compressors
KS B 4092-2014 Hot presses — Test and inspection methods
KS A 5606-2022 Design of durability test for mechanical components
KS B ISO 13856-1:2003 Safety of machinery-Pressure-sensitive protective devices-Part 1:General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors
KS B ISO 13856-1:2016 Safety of machinery－Pressure-sensitive protective devices－Part 1：General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors
KS B 4092-1980 Hot presses — Test and inspection methods
KS B 4092-2012 Hot presses-Test and inspection methods
KS B 4092-1987 Hot presses — Test and inspection methods

United States Navy

NAVY MIL-STD-2218-1992 THERMAL DESIGN, ANALYSIS, AND TEST PROCEDURES FOR AIRBORNE ELECTRONIC EQUIPMENT
NAVY MIL-E-8970-1967 ENGINES AND RELATED PROPULSION AND POWER EQUIPMENT, AIRCRAFT, ACCEPTANCE TESTS OF, SAMPLING PLAN FOR, STATISTICAL

Standard Association of Australia （SAA）

AS 4362.2:1996 High-voltage test techniques for low-voltage equipment - Test equipment

Institute of Electrical and Electronics Engineers (IEEE)

IEEE C37.41-2016 IEEE Standard Design Tests for High-Voltage (>1000 V) Fuses and Accessories
IEEE Std C37.41-2016 IEEE Standard Design Tests for High-Voltage (>1000 V) Fuses and Accessories
IEEE PC37.41/D9, May 2016 IEEE Draft Standard Design Tests for High-Voltage (>1000 V) Fuses and Accessories
IEEE PC37.41/D8, December 2015 IEEE Draft Standard Design Tests for High-Voltage (>1000 V) Fuses and Accessories

YU-JUS

JUS N.A5.543-1989 Righ voltage test techniques. Heasuring devices
JUS N.R4.442-1978 Electromechanical components for electromc eguipment. Test methods. Test 1 lk: Low airpressure
JUS N.A5.865-1985 Basic environmentai testing procedures. Test Ql - Sealing Bomb pressure test

Danish Standards Foundation

DS/EN 13923:2005 Filament-wound FRP pressure vessels - Materials, design, manufacturing and testing
DS/EN 61180-2:2012 High-voltage test techniques for low-voltage equipment - Part 2: Test equipment
DS 2355:1990 Micrometers. special design micrometer. Calipers for external measurement. Characteristics, requirements, testing
DS/EN 1595:1998 Pressure equipment made from borosilicate glass 3.3 - General rules for design, manufacture and testing
DS/EN ISO 13856-2:2013 Safety of machinery - Pressure-sensitive protective devices - Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars
DS/EN ISO 13856-1:2013 Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors
DS/EN 437:2021 Test gases – Test pressures – Appliance categories
DS/EN 842+A1:2010 Safety of machinery - Visual danger signals - General requirements, design and testing
DS/EN ISO 13856-3:2013 Safety of machinery - Pressure-sensitive protective devices - Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices

AENOR

UNE-EN 13923:2006 Filament-wound FRP pressure vessels - Materials, design, manufacturing and testing
UNE-EN ISO 13856-1:2013 Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors (ISO 13856-1:2013)
UNE-EN 61180-2:1996 HIGH-VOLTAGE TEST TECHNIQUES FOR LOW-VOLTAGE EQUIPMENT. PART 2: TEST EQUIPMENT.
UNE-EN ISO 13856-2:2013 Safety of machinery - Pressure-sensitive protective devices - Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars (ISO 13856-2:2013)
UNE-EN 61180:2017 High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment
UNE 20608-2:1999 EQUIPMENT RELIABILITY TESTING. PART 2: DESIGN OF TEST CYCLES.
UNE-EN 842:1997+A1:2008 Safety of machinery - Visual danger signals - General requirements, design and testing
UNE 68086:1988 EQUIPMENT FOR VINE CULTIVATION AND WINE MAKING. GRAPE PRESSES. METHODS OF TEST
UNE-EN 62052-11:2004 Electricity metering equipment (AC) - General requirements, tests and test conditions -- Part 11: Metering equipment

Association Francaise de Normalisation

NF R63-302*NF EN 12645:2014 Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation/deflation of tyres for motor vehicles - Metrology, requirements and testing
NF C41-106*NF EN 61180:2016 High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment
NF EN 13923:2006 Récipients sous pression en PRV par enroulement filamentaire - Matériaux, conception, fabrication et essais
NF EN 437:2021 Gaz d'essais - Pressions d'essais - Catégories d'appareils
NF EN 12101-13:2022 Systems for smoke and heat control - Part 13: pressure differential systems (PDS) - Design and calculation methods, installation, acceptance tests, periodic tests and maintenance
NF E09-040-1*NF EN ISO 13856-1:2013 Safety of machinery - Pressure-sensitive protective devices - Part 1 : general principles for design and testing of pressure-sensitive mats and pressure-sensitive floors
NF EN 842+A1:2008 Safety of machinery - Visual danger signals - General requirements, design and testing
NF E09-040-2*NF EN ISO 13856-2:2013 Safety of machinery - Pressure-sensitive protective devices - Part 2 : general principles for design and testing of pressure-sensitive edges and pressure-sensitive bars
NF EN 842/IN1:2008 Safety of machinery - Visual danger signals - General requirements, design and testing
NF E09-040-3*NF EN ISO 13856-3:2013 Safety of machinery - Pressure-sensitive protective devices - Part 3 : general principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices

KR-KS

KS B ISO 13856-1-2016 Safety of machinery－Pressure-sensitive protective devices－Part 1：General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors
KS R ISO 5011-2018 Inlet air cleaning equipment for internal combustion engines and compressors — Performance testing
KS C IEC 61180-2020 High-voltage test techniques for low-voltage equipment —Definitions, test and procedure requirements, test equipment
KS B ISO 13856-2-2016 Safety of machinery－Pressure-sensitive protective devices－Part 2：General principles for the design and testing of pressure-sensitive edges and pressure-sensitive bars
KS B ISO 12482-2016 Cranes — Monitoring for crane design working period

European Committee for Standardization (CEN)

EN 12645:1998 Pressure Gauges - Apparatus for Inspection of Pressure and/or Inflation of Tyres for Motor Vehicles - Metrology, Requirements and Testing
EN 12645:2014 Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing
EN 1474-1:2008 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 1: Design and testing of transfer arms
EN ISO 13856-3:2013 Safety of machinery - Pressure-sensitive protective devices - Part 3: General principles for design and testing of pressuresensitive bumpers, plates, wires and similar devices [Superseded: CEN EN 1760-3]
EN ISO 13856-1:2013 Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for design and testing of pressuresensitive mats and pressure-sensitive floors [Superseded: CEN EN 1760-1]
EN 842:1996+A1:2008 Safety of machinery - Visual danger signals - General requirements, design and testing

International Organization for Standardization (ISO)

ISO 5011:2020 Inlet air cleaning equipment for internal combustion engines and compressors — Performance testing
ISO/TR 15657:2013 Fire resistance tests.Guidelines for computational structural fire design
ISO 13856-3:2006 Safety of machinery - Pressure-sensitive protective devices - Part 3: General principles for the design and testing of pressure-sensitive bumpers, plates, wires and similar devices
ISO 13856-3:2013 Safety of machinery - Pressure-sensitive protective devices - Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices
ISO 13856-1:2001 Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors
ISO 13856-2:2005 Safety of machinery - Pressure-sensitive protective devices - Part 2: General principles for the design and testing of pressure-sensitive edges and pressure-sensitive bars

International Electrotechnical Commission (IEC)

IEC 61180:2016 High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment

European Committee for Electrotechnical Standardization（CENELEC）

EN 61180:2016 High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment

Association of German Mechanical Engineers

VDI/VDE 2428 Blatt 5-1988 Equipment engineering; design for testability

ES-UNE

UNE-EN 1595:1997 Pressure equipment made from borosilicate glass 3.3 - General rules for design, manufacture and testing
UNE-EN 12101-13:2022 Smoke and heat control systems - Part 13: Pressure differential systems (PDS) - Design and calculation methods, installation, acceptance testing, routine testing and maintenance

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JESD12-5-1988 Design for Testability Guidelines
JEDEC JESD82-28A-2008 Fully Buffered DIMM Design for Test, Design for Validation (DFx)

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 4475-2001 Design of Compressor Impellers for Water as a Refrigerant

NL-NEN

NEN-EN 289-1994 Rubber and plastics machinery.Compression and transfer moulding presses.Safety requirements for the design

Defense Logistics Agency

DLA MIL-T-26963 D-1992 TESTER, PRESSURE GAGE, HYDRAULIC, PORTABLE, TYPE MP-1
DLA MIL-T-26963 D VALID NOTICE 2-2005 TESTER, PRESSURE GAGE, HYDRAULIC, PORTABLE, TYPE MP-1
DLA MIL-T-26963 D NOTICE 1-1999 TESTER, PRESSURE GAGE, HYDRAULIC, PORTABLE, TYPE MP-1

ZA-SANS

SANS 53923:2009 Filament-wound FRP pressure vessels - Materials, design, manufacturing and testing

GB-REG

REG NASA-LLIS-0961-1995 Lessons Learned ?Space Shuttle Main Engine (SSME) Component Test Facility: Simplicity of Design
REG NASA-LLIS-1728-2006 Lessons Learned ?Space Shuttle - Designing Environments Tests for Sustainability

VDI - Verein Deutscher Ingenieure

VDI 2211 Blatt 2-1999 Datenverarbeitung in der Konstruktion - Berechnungen in der Konstruktion

PT-IPQ

NP 2617-1984 Agricultural machinery. Winemaking equipment, grape pressing equipment. Related test methods

PH-BPS

PNS ISO 13856-1:2021 Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressuresensitive floors
PNS ISO 13856-2:2021 Safety of machinery - Pressure-sensitive protective devices - Part 2: General principles for design and testing of pressure-sensitive edges and pressuresensitive bars

FI-SFS

SFS 4302-1979 Cranes and crane track calculation instructions. Mechanical allowable voltage. Use stability testing

GOST

GOST ISO 81060-1-2021 Non-invasive sphygmomanometers (measuring devices of arterial pressure). Part 1. Requirements and test methods for non-automated measurement type

Indonesia Standards

SNI IEC 62052-11:2011 “Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11: Metering equipment”

BE-NBN

NBN E 51-006-1989 Compressors for process industries. Turbocompressors, specifications and data sheets for the design and manufacture of compressors

GOSTR

GOST 20276.2-2020 Soils. Radial рressuremeter test procedure

(U.S.) Ford Automotive Standards

FORD FLTM EU-BJ 001-1-2001 EXTREME PRESSURE TEST ON OILS BY THE FALEX MACHINE

HU-MSZT

MSZ 19170/2-1986 General technical provisions for the design and installation of cranes, hydraulic equipment
MSZ 13802/1-1984 Pressure vessel design. Steel selection design requirements

EEMUA - Engineering Equipment and Materials Users Association

PUB NO 168-1991 A Guide to the Pressure Testing of In-Service Pressurised Equipment

IN-BIS

IS 4593-1968 Straight edge press test chart
IS 10210-1993 Criteria for design of hydraulic hoists for gates (First Revision)

Engineering Equipment and Materials Users Association （EEMUA)

EEMUA PUB NO 168-1991 A Guide to the Pressure Testing of In-Service Pressurised Equipment