Epoxy heat shrink

Epoxy heat shrink, Total:196 items.

The international standard classification for "Epoxy heat shrink" includes: Raw materials for rubber and plastics , Ventilators. Fans. Air-conditioners , Films and sheets , Plastics and rubber insulating materials , Rubber and plastics products , Packaging and distribution of goods in general .

The Chinese standard classification for "Epoxy heat shrink" includes: Synthetic resin and plastic , Gas separation and liquefaction equipment , Electrical insulating material and its products , Plastic profile , Packaging material and container .

Group Standards of the People's Republic of China

T/CEEIA 288-2017 ?Magnesium hydroxide for heat-shrinkable material
T/SDAQI 091-2023 Heat-shrinkable polyoiefine films
T/SHPTA 050-2023 Environment-friendly and low temperature heat-shrinkable polyester film
T/QGCML 1269-2023 Heat shrink film for beverage packaging

Professional Standard - Chemical Industry

HG/T 2625-1994 Determination of Linear Shrinkage Rate of Epoxy Casting Resin

Professional Standard - Machinery

JB/T 11330-2013 Heat-shrinkable Shed
JB/T 11334-2013 Heat-shrinkable Stress Control Tubing
JB/T 11335-2013 Heat-shrinkable Jacket Tubing
JB/T 11332-2013 Heat-shrinkable Inner Insulation Tubing
JB/T 6542-1993 Determination of thermosetting moulding plastics shrinkage ratio
JB/T 11333-2013 Class 1E Heat-shrinkable Tubing for Low Voltages in Nuclear Power Stations
JB/T 11336-2013 Heat-shrinkable Breakout
JB/T 6892-2010 Acceptance test for reciprocating Oxygen compressors
JB/T 11884-2014 Non-lubricated Medium Pressure Compressor for Recovering Carbon Dioxide
JB/T 11329-2013 Anti-tracking Heat-shrinkable Insulation Tubing
JB/T 11337-2013 Heat-shrinkable Creepage Extender
JB/T 11697-2013 Heat-shrinkable diesel-resistance flexible tubing
JB/T 11696-2013 Heat-shrinkable marker tubing
JB/T 11331-2013 Heat-shrinkable Semi-conductive Tubing

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34848-2017 Determination of shrinkage character for heat-shrinkable films

Taiwan Provincial Standard of the People's Republic of China

CNS 8790-1988 Method of Test for Thermal Resistance of Heat Shrinkable Tubing for Electrical Insulation
CNS 11742-1986 Method of Test for Reheat Shrikage of Insulating Fire Bricks
CNS 10677-1983 Method of Test for Heat Shrinkable Plastic Films for Packaging
CNS 8783-1988 Method of Test for Contraction Percentage of Heat Shrinkable Tubing for Electrical Insulation
CNS 10676-1983 Heat Shrinkable Plastic Films for Packaging

工业和信息化部

JB/T 13395-2018 Heat-shrinkable solder sleeve for electrical purpose
JB/T 13773-2020 Heat-shrinkable chlorinated polyolefin sleeving
JB/T 13772-2020 Heat-shrinkable grease trap
JB/T 13593-2018 Heat-shrinkable fluoroelastomer tubing for electrical purpose
JB/T 14182-2022 Heat-shrinkable braided sleeve for electrical purposes

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 41720-2022 Heat-shrinkable chlorinated polyolefin sleeving
GB/T 42735-2023 Heat-shinkable polyolefin sleeving-stress control
GB/T 19787-2005 Heat-shrinkable polyolefine films for packaging materials
GB/T 41719-2022 Heat-shrinkable sleeving for oil barrier applications
GB/T 13519-2016 Polyethylene heat-shrinkable film for packaging applications
GB/T 13519-1992 Heat shrinkable polyethylene film
GB/T 42736-2023 Heat-shinkable semiconductive polyolefin sleeving

Professional Standard - Coal

MT 454-1995 Specifications for carbon dioxide absorbent calcium hydroxide used in compressed oxygen respirators and compressed oxygen self-rescuers

未注明发布机构

SAE AS83519D-2021 Shield Termination, Solder Style, Insulated, Heat-Shrinkable, Environment Resistant General Specification for

工业和信息化部/国家能源局

JB/T 12878-2016 Polyolefin heat shrinkable tube for busbar insulation
JB/T 12874-2016 Flame retardant double wall polyolefin heat shrink tubing
JB/T 12873-2016 Non-flame retardant double wall polyolefin heat shrink tubing
JB/T 12877-2016 Flexible polyolefin heat shrinkable tube
JB/T 12875-2016 Flame retardant polyolefin heat shrink tubing
JB/T 12879-2016 Medium thick wall polyolefin heat shrink tubing
JB/T 12876-2016 Semi-rigid polyolefin heat shrink tubing

Professional Standard - Light Industry

QB/T 3632-1999 Polyvinyl Choride Heat-shrinkable Film and Tube

Professional Standard - Petroleum

SY/T 4054-2003 Radiation crosslinked polyethylene heat shrinkable tape (sleeve)
SY/T 4054-1992 Radiation cross-linked polyethylene heat shrinkable tape

Professional Standard - Automobile

QC/T 1045-2016 Heat-shrinkable tubing for automotive pipe

Professional Standard - Agriculture

NY/T 4273-2023 Technical specification for shrink packaging of meat

Professional Standard - Traffic

JT/T 1478-2023 Hot mix epoxy asphalt for road use

Military Standard of the People's Republic of China-General Armament Department

GJB 7277-2011 Specification for polyolefin heat-shrinkable marker sleeving

PL-PKN

PN C89085-22-1988 Epoxy resins Methods of testing Determination of total volume shrinkage

CZ-CSN

CSN 64 1312-1992 Plastics. Polyester and epoxy resins. Determination of total volume shrinkage
CSN 64 0809-1979 Plastics. Mould slirinkage nad postshrinkage oí theimosetting materials

U.S. Military Regulations and Norms

ARMY MIL-T-47051 A-1991 TUBING, HEAT SHRINKABLE

Society of Automotive Engineers (SAE)

SAE AMS3731/7-1981 POTTING COMPOUND, EPOXY Bisphenol A-Type Filled, Room Temperature Cure, Low Shrinkage
SAE AMS3731/7A-2011 POTTING COMPOUND, EPOXY Bisphenol A-Type Filled, Room Temperature Cure, Low Shrinkage
SAE AMS3731/7B-1993 (Noncurrent)Potting Compound, Epoxy Bisphenol A-Type Filled, Room Temperature Cure, Low Shrinkage
SAE AS83519A_A2-2008 Shield Termination, Solder Style, Insulated, Heat-Shrinkable, Environment Resistant, General Specification For
SAE AS83519A_A1-2004 Shield Termination, Solder Style, Insulated, Heat-Shrinkable, Environment Resistant General Specification For
SAE AS83519A_A3-2008 Shield Termination, Solder Style, Insulated, Heat-Shrinkable, Environment Resistant General Specification For
SAE AMS3637G-2012 Tubing, Irradiated Polyolefin Plastic, Electrical Insulation, Clear, Flexible, Heat Shrinkable, 2 to 1 Shrink Ratio
SAE AMS3637F-1993 Tubing, Irradiated Polyolefin Plastic, Electrical Insulation Clear, Flexible, Heat Shrinkable 2 to 1 Shrink Ratio
SAE AS83519B-2011 Shield Termination, Solder Style, Insulated, Heat-Shrinkable, Environment Resistant General Specification for
SAE AMS3638F-1993 Tubing, Irradiated Polyolefin Plastic, Electrical Insulation Pigmented, Semi-Rigid, Heat Shrinkable, 2 to 1 Shrink Ratio
SAE AMS3638G-2012 Tubing, Irradiated Polyolefin Plastic, Electrical Insulation Pigmented, Semi-Rigid, Heat-Shrinkable, 2 to 1 Shrink Ratio
SAE AS939-2002 Solder Sleeves, Heat Shrinkable, Insulated
SAE AMS3623D-1993 Tubing, Irradiated Polychloroprene Elastomer, Electrical Insulation Flexible, Heat-Shrinkable, 1.750 to 1 Shrink Ratio
SAE AMS3636-1965 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3637-1965 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Clear, Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3625-1968 ELASTOMERIC TUBING, ELECTRICAL INSULATION Cross Linked Silicone, Pigmented, Flexible, Heat Shrinkable 1.750 to 1 Shrink Ratio
SAE AMS3623E-2011 Elastomeric Tubing, Electrical Insulation, Irradiated Polychloroprene, Flexible, Heat-Shrinkable, 1.750 to 1 Shrink Ratio
SAE AS6976-2022 Sleeving, Identification, Heat Shrinkable, General Specification
SAE AS31171A-2003 BOOTS, HEAT-SHRINKABLE, STRAIN-RELIEF, RIGHT ANGLE
SAE AMS3582-1969 PLASTIC TUBING, ELECTRICAL INSULATION Crosslinked Polyvinyl Chloride, Flexible, Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3638-1965 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Semi-Rigid, Heat Shrinkable 2 to 1 Shrink Ratio
SAE AS83519/3A-2019 SHIELD TERMINATION, SOLDER STYLE, INSULATED, HEAT-SHRINKABLE, ENVIRONMENT RESISTANT WITH PREINSTALLED BRAID, CLASS 1, NON-ROHS
SAE AMS3636D-1973 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Pigmented, Flexible, Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3623-1968 ELASTOMERIC TUBING, ELECTRICAL INSULATION Irradiated Polychloroprene, Flexible, Heat Shrinkable 1.750 to 1 Shrink Ratio
SAE AMS3579D-2012 Plastic Tubing, Electrical Insulation Non-Crosslinked Polyvinyl Chloride, Flexible, Heat Shrinkable 1.6 to 1 Shrink Ratio
SAE AMS3636C-1971 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Pigmented, Flexible, Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3636B-1967 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Pigmented, Flexible, Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3636A-1966 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Pigmented, Flexible, Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3579A-1978 PLASTIC TUBING, ELECTRICAL INSULATION Non-Crosslinked Polyvinyl Chloride, Flexible, Heat Shrinkable 1.6 to 1 Shrink Ratio
SAE AMS3583C-1992 PLASTIC TUBING, ELECTRICAL INSULATION Crosslinked Polyvinyl Chloride, Semi-Rigid Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3623A-1975 ELASTOMERIC TUBING, ELECTRICAL INSULATION Irradiated Polychloroprene, Flexible, Heat-Shrinkable 1.750 to 1 Shrink Ratio
SAE AMS3583-1969 PLASTIC TUBING, ELECTRICAL INSULATION Crosslinked Polyvinyl Chloride, Semi-Rigid, Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3579B-2011 PLASTIC TUBING, ELECTRICAL INSULATION Non-Crosslinked Polyvinyl Chloride, Flexible, Heat Shrinkable 1.6 to 1 Shrink Ratio
SAE AMS3579C-2003 Plastic Tubing, Electrical Insulation Non-Crosslinked Polyvinyl Chloride, Flexible, Heat Shrinkable 1.6 to 1 Shrink Ratio
SAE AMS3637A-1966 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Clear, Flexible, Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3583A-1979 PLASTIC TUBING, ELECTRICAL INSULATION Crosslinked Polyvinyl Chloride, Semi-Rigid Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3579-1979 PLASTIC TUBING, ELECTRICAL INSULATION Non-Crosslinked Polyvinyl Chloride, Flexible, Heat Shrinkable 1.6 to 1 Shrink Ratio
SAE AMS3583B-1991 PLASTIC TUBING, ELECTRICAL INSULATION Crosslinked Polyvinyl Chloride, Semi-Rigid Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3623B-1982 ELASTOMERIC TUBING, ELECTRICAL INSULATION Irradiated Polychloroprene, Flexible, Heat-Shrinkable 1.750 to 1 Shrink Ratio

Association Francaise de Normalisation

NF T51-501:1976 PLASTICS. POLYESTER AND EPOXY CASTING RESINS. DETERMINATION OF TOTAL VOLUME SHRINKAGE.
NF EN ISO 3521:1999 Plastics - Epoxy and unsaturated polyester resins - Determination of overall shrinkage by volume
NF EN 13268:2001 Surfactants - Determination of the content of ethylene oxide and propylene oxide in condensates based on ethylene oxide and propylene oxide
NF T51-401:1981 Plastics. Thermosetting moulding materials. Determination of shrinkage and post-shrinkage.
NF T51-501*NF EN ISO 3521:1999 Plastics. Unsaturated polyester and epoxy resins. Determination of overall volume shrinkage.
NF EN ISO 14616:2004 Plastics - Heat-shrinkable films made of polyethylene, ethylene copolymers and their mixtures - Determination of shrinkage and contraction stresses
NF EN 13844:2003 Textiles - Monofilaments - Determination of heat shrinkage

SAE - SAE International

SAE AMS3731/7C-2016 Potting Compound@ Epoxy Bisphenol A-Type Filled@ Room Temperature Cure@ Low Shrinkage
SAE AS83519A-A1-2004 Shield Termination@ Solder Style@ Insulated@ Heat-Shrinkable@ Environment Resistant General Specification For
SAE AS83519A-A2-2008 Shield Termination@ Solder Style@ Insulated@ Heat-Shrinkable@ Environment Resistant General Specification For
SAE AS83519A-2003 Shield Termination@ Solder Style@ Insulated@ Heat-Shrinkable@ Environment Resistant General Specification For
SAE AS83519C-2015 Shield Termination, Solder Style, Insulated, Heat-Shrinkable, Environment Resistant General Specification for
SAE AS1073B-2019 SLEEVE HOSE ASSEMBLY@ HEAT SHRINKABLE
SAE AS1073A-1989 SLEEVE HOSE ASSEMBLY@ HEAT SHRINKABLE
SAE AS939-1970 SOLDER SLEEVES@ HEAT SHRINKABLE@ INSULATED
SAE AS83519/3A-2015 SHIELD TERMINATION@ SOLDER STYLE@ INSULATED@ HEAT-SHRINKABLE@ ENVIRONMENT RESISTANT WITH PREINSTALLED BRAID@ CLASS 1@ NON-ROHS

General Motors Corporation (GM)

GM 9985850-1991 Tubing - Heat Shrink

TH-TISI

TIS 1311-1995 Heat shrinkable film

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE PH-97-12-1-1997 Modeling of Absorption/Compression Cycles Using Working Pair Carbon Dioxide/Acetone
ASHRAE PH-97-1-1-1997 Current Status of Absorption/Compression Cycle Technology
ASHRAE 3743-1994 Vapor Compression Cycle with Solution Circuit and Desorber/Absorber Heat Exchange

TR-TSE

TS 3198-1978 Plastics-Polyester And Epoxy Casting-Resins Determination O? Total Volume Shrinkage

US-AAMA

AAMA 505-1998 Dry Shrinkage And Composite Performance Thermal Cycling Test Procedure

International Organization for Standardization (ISO)

ISO 3521:1976 Plastics; Polyester and epoxy casting resins; Determination of total volume shrinkage
ISO 3521:1997 Plastics - Unsaturated polyester and epoxy resins - Determination of overall volume shrinkage

Korean Agency for Technology and Standards (KATS)

KS M ISO 3521-2010(2020) Plastics－Unsaturated polyester and epoxy resins－Determination of overall volume shrinkage
KS M ISO 3521-2020 Plastics－Unsaturated polyester and epoxy resins－Determination of overall volume shrinkage
KS M ISO 3521:2010 Plastics－Unsaturated polyester and epoxy resins－Determination of overall volume shrinkage
KS E 4118-1996 Compressed oxygen closed circuit self- contained breathing apparatus
KS L 3303-1987 Testing method for reheat shrinkange of insulating fire bricks
KS L 3303-2017(2022) Testing method for reheat shrinkange of insulating fire bricks
KS T 1043-2016(2021) Heat shrinkable plastic films for packaging
KS T 1043-2021 Heat shrinkable plastic films for packaging
KS K 3841-2010 Textiles-Monofilaments-Determination of thermal shrinkage
KS T 1043-2016 Heat shrinkable plastic films for packaging
KS L 3303-2022 Testing method for reheat shrinkange of insulating fire bricks
KS L 3303-2017 Testing method for reheat shrinkange of insulating fire bricks
KS M ISO 14616-2002(2022) Plastics－Heatshrinkable film of polyethylene, ethylene copolymers and their mixtures－Determination of shrinkage stress and contraction stress
KS M ISO 14616-2022 Plastics－Heatshrinkable film of polyethylene, ethylene copolymers and their mixtures－Determination of shrinkage stress and contraction stress
KS M ISO 14616-2002(2017) Plastics－Heatshrinkable film of polyethylene, ethylene copolymers and their mixtures－Determination of shrinkage stress and contraction stress
KS K 3841-2021 Textiles — Monofilaments — Determination of thermal shrinkage

Defense Logistics Agency

DLA MIL-PRF-46846 C VALID NOTICE 1-2005 RUBBER, SYNTHETIC, HEAT-SHRINKABLE
DLA MIL-PRF-46846 C-1998 RUBBER, SYNTHETIC, HEAT-SHRINKABLE

Danish Standards Foundation

DS/EN ISO 3521:1999 Plastics - Unsaturated polyester and epoxy resins - Determination of overall volume shrinkage
DS/EN ISO 14616:2004 Plastics - Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures - Determination of shrinkage stress and contraction stress
DS/EN 13844:2003 Textiles - Monofilaments - Determination of thermal shrinkage

British Standards Institution (BSI)

BS EN ISO 3521:1997 Plastics. Unsaturated polyester and epoxy resins. Determination of overall volume shrinkage
BS EN ISO 3521:2000(2004) Plastics — Unsaturated polyester and epoxy resins — Determination of overall volume shrinkage
BS EN ISO 3521:2000 Plastics. Unsaturated polyester and epoxy resins. Determination of overall volume shrinkage
BS EN 62329-2:2006 Heat shrinkable moulded shapes - Methods of test
BS EN ISO 14616:2004 Plastics. Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures. Determination of the shrinkage stress and contraction stress
BS EN 60684-3-209:2003 Specification for flexible insulating sleeving - Specification requirements for individual types of sleeving - Heat-shrinkable polyolefin sleeving, general purpose, flame retarded, shrink ratio 2:1 - Part 3: Heat-shrinkable polyolefin sleeving, general pu

SCC

DANSK DS/EN ISO 3521:1999 Plastics - Unsaturated polyester and epoxy resins - Determination of overall volume shrinkage
ASTM D4974-22 Standard Test Method for Hot Air Thermal Shrinkage of Yarn and Cord Using a Thermal Shrinkage Oven
NS-EN ISO 3521:1999 Plastics — Unsaturated polyester and epoxy resins — Determination of overall volume shrinkage (ISO 3521:1997)
AENOR UNE-EN ISO 3521:2000 PLASTICS - UNSATURATED POLYESTER AND EPOXY RESINS - DETERMINATION OF OVERALL VOLUME SHRINKAGE (ISO 3521:1997)
BS EN 60684-3-213:1999 Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving-Heat-shrinkable polyolefin sleeving, not flame retarded, shrink ratio 2:1-Heat-shrinkable polyolefin sleeving, not flame retarded, shrink ratio 2:1
DANSK DS/EN ISO 14616:2004 Plastics - Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures - Determination of shrinkage stress and contraction stress
UNE 53019-1:2005 Plastics. Thermosetting moulding materials. Determination of shrinkage. Specimen test moulding by contraction
NS-EN 13844:2002 Textiles — Monofilaments — Determination of thermal shrinkage
CAN/CGSB 4.2 No.67-M90-1990 Textile testing methods - Evaluation of dimensional change and appearance of coated, laminated, laminated and iron-on fabrics following laundering
BS 2782-6 METHOD 644A:1979 Methods of testing plastics. Dimensional properties-Determination of total volume shrinkage of polyester and epoxide casting resins
AENOR UNE-EN 13844:2003 Textiles - Monofilaments - Determination of thermal shrinkage.

German Institute for Standardization

DIN EN ISO 3521:1999-10 Plastics - Unsaturated polyester and epoxy resins - Determination of overall volume shrinkage (ISO 3521:1997); German version EN ISO 3521:1999
DIN EN ISO 3521:1999 Plastics - Unsaturated polyester and epoxy resins - Determination of overall volume shrinkage (ISO 3521:1997); German version EN ISO 3521:1999
DIN EN ISO 14616:2004-10 Plastics - Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures - Determination of shrinkage stress and contraction stress (ISO 14616:1997); German version EN ISO 14616:2004
DIN EN 13844:2003-04 Textiles - Monofilaments - Determination of thermal shrinkage; German version EN 13844:2002

RU-GOST R

GOST R 57593-2017 Plastics. Unsaturated polyester and epoxy resins. Determination of overall volume shrinkage

YU-JUS

JUS G.S1.831-1991 Plastics.Polyester and epoxy casting resins.Determination of total volume skrinkage

American Society for Testing and Materials (ASTM)

ASTM D4974-04 Standard Test Method for Hot Air Thermal Shrinkage of Yarn and Cord Using a Thermal Shrinkage Oven
ASTM D4974-04(2011) Standard Test Method for Hot Air Thermal Shrinkage of Yarn and Cord Using a Thermal Shrinkage Oven
ASTM D4974-99 Standard Test Method for Thermal Shrinkage of Yarn and Cord Using a Thermal Shrinkage Oven
ASTM D4974-04(2016) Standard Test Method for Hot Air Thermal Shrinkage of Yarn and Cord Using a Thermal Shrinkage Oven
ASTM D4974-01 Standard Test Method for Thermal Shrinkage of Yarn and Cord Using a Thermal Shrinkage Oven
ASTM D4974/D4974M-22 Standard Test Method for Hot Air Thermal Shrinkage of Yarn and Cord Using a Thermal Shrinkage Oven
ASTM D4974-02 Standard Test Method for Thermal Shrinkage of Yarn and Cord Using a Thermal Shrinkage Oven
ASTM D5591-04 Standard Test Method for Thermal Shrinkage Force of Yarn and Cord With a Thermal Shrinkage Force Tester
ASTM D5591-04(2016) Standard Test Method for Thermal Shrinkage Force of Yarn and Cord With a Thermal Shrinkage Force Tester
ASTM D5591-22 Standard Test Method for Thermal Shrinkage Force of Yarn and Cord With a Thermal Shrinkage Force Tester
ASTM D5591-02 Standard Test Method for Thermal Shrinkage Force of Yarn and Cord With a Thermal Shrinkage Force Tester
ASTM D5591-04(2011) Standard Test Method for Thermal Shrinkage Force of Yarn and Cord With a Thermal Shrinkage Force Tester
ASTM D5591-98a Standard Test Method for Thermal Shrinkage Force of Yarn and Cord Using the Testrite Thermal Shrinkage Force Tester

Japanese Industrial Standards Committee (JISC)

JIS M 7601:1993 Compressed oxygen closed circuit self-contained breathing apparatus
JIS Z 1709:1995 Heat shrinkable plastic films for packaging
JIS C 2132:1976 Testing methods of heat shrinkable tubing for electrical insulation
JIS R 2613:1985 Testing method for reheat shrinkage of insulating fire bricks

United States Navy

NAVY QPL-AS83519-QPD-2010 Shield Termination, Solder Style, Insulated, Heat-Shrinkable, Environment Resistant, General Specification for

Lithuanian Standards Office

LST EN ISO 3521:2001 Plastics - Unsaturated polyester and epoxy resins - Determination of overall volume shrinkage (ISO 3521:1997)

European Committee for Standardization (CEN)

EN ISO 3521:1999 Plastics - Unsaturated Polyester and Epoxy Resins - Determination of Overall Volume Shrinkage ISO 3521: 1997

AENOR

UNE-EN ISO 3521:2000 PLASTICS - UNSATURATED POLYESTER AND EPOXY RESINS - DETERMINATION OF OVERALL VOLUME SHRINKAGE (ISO 3521:1997)
UNE-EN 13844:2003 Textiles - Monofilaments - Determination of thermal shrinkage.

GM North America

GM GM9643P-1996 Shrinkage of Heat-Bonding Sheet Form Materials

SE-SIS

SIS 71 10 33-1961 Thermal shnrk test nn glass containers

CH-SNV

SNV 195 865-1970 plastic products. Unsaturated polyester resin and epoxy resin. Determination of total volume shrinkage

(U.S.) Ford Automotive Standards

FORD ESB-M4D360-A-1978 TUBING, POLYVINYL CHLORIDE - HEAT SHRINKABLE

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TM-650 5.7.2-1973 Incoming Acceptance Testing of Epoxy Resins

GSO

GSO ISO 14616:2015 Plastics -- Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures -- Determination of shrinkage stress and contraction stress
BH GSO ISO 14616:2016 Plastics -- Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures -- Determination of shrinkage stress and contraction stress

ZA-SANS

SANS 5653:1972 Determination of heat shrinkage of elastomeric material

ISUZU - Isuzu Motors Ltd.

ISC-C97-005-2009 Sheet heat curing epoxy glue

Others: epoxy asphalt,epoxy,Propylene oxide,epoxy glue,acid epoxy,road epoxy,epoxy road,Epoxy Rebar,epoxy on,epoxy bolts,Epoxy formulation,Oxirane ether,Ethylene oxide,epoxy mortar,fiber epoxy,epoxy hydroxyl,fiber epoxy,Epoxy activation,Oxyhexane