Design of aeration pipeline for sewage station

Design of aeration pipeline for sewage station, Total:190 items.

The international standard classification for "Design of aeration pipeline for sewage station" includes: Hydraulic energy engineering , Installations in buildings , Construction of railways , Energy and heat transfer engineering in general , Installations and equipment for waste disposal and treatment , Other mining equipment , Gas supply systems , Buildings for commerce and industry , Installations in buildings in general .

The Chinese standard classification for "Design of aeration pipeline for sewage station" includes: Color , Outdoor water supply and draining engineering , Ventilation and air conditioning engineering , Water supply and draining engineering in general , Water power engineering , Petroleum engineering , Railway engineering , Technical management , Environmental protection equipment , Mine and coal engineering , Gas supply engineering , Industrial construction engineering , Petrochemical and chemical industry engineering .

Professional Standard - Urban Construction

CJ/T 3015.4-1996 Openable middle and fine bubble diffuser for wastewater treatment
CJ/T 158-2002 Colour standard for pipelines and equipments of municipal wastewater treatment plants
CJ/T 3015.1-1993 Fine bubble aerator for wastewater treatment

工业和信息化部/国家能源局

JB/T 13563-2018 Gear reducer for sewage treatment aeration machine

Professional Standard - Recommended Standards for Engineering Construction

CECS 05-1988 Design code for treatment of phenol-containing wastewater in coking plant and gas plant
CECS 209-2006 Specification for design of aeration biological fluidized tank
CECS 75-1995 Belt filter press sludge dewatering design specification (with explanation)
CECS 97-1997 Specification for design of aeration blowing system
CECS 114-2000 Specification for design of oxygen aeration
CECS 42-1992 Code for design of deep well aeration

未注明发布机构

DIN 19667 E:2008-08 Drainage of landfills; code of practice for design, construction and operation
DIN:3266 Fittings for drinking water installations in properties and buildings – pipe aerators designs D and E – requirements and tests
DIN 19667 E:2014-08 Drainage of landfills; code of practice for design, construction and operation
DIN EN 14451 E:2019-02 Safety devices to prevent drinking water contamination through backflow – pipe aerators DN 10 up to and including DN 50 – family D, type A
DIN EN 14451:2020 Safety devices to prevent drinking water contamination through backflow – pipe aerators DN 10 up to and including DN 50 – family D, type A
ANSI/ANS 58.2-1988 (1998) errata ERRATUM Design Basis for Protection of Light Water Nuclear Power Plants Against the Effects of Postulated Pipe Rupture

Professional Standard - Electricity

DL/T 5398-2007 Design specification for intake of hydropower station
DL/T 5079-1997（条文说明） Specifications for the design of diversion channels and forebays of hydropower stations
DL/T 5143-2018 Code for design of water supply and drainage for substation and converter station
DL/T 5079-2007 Design specifications for hydropower headrace and forebay
DL/T 5141-2001 Specifications for design of steel penstocks of hydroelectric stations
DL/T 5079-1997 Design Specifications for Hydropower Headrace and Forebay
DL/T 5141-2001（条文说明） Specifications for design of steel penstocks of hydroelectric stations(explanation)
DL/T 5204-2016 Code for design of oil and gas pipeline in power plant

水利部

SL/T 205-2015 Design specifications for water diversion channels and forebays of hydropower stations

Professional Standard - Water Conservancy

SL 281-2003 Design specification for steel penstocks of hydroelectric stations
SL 281-2003（条文说明） Design specification for steel penstocks of hydroelectric stations(explanation)
SL 205-2015 Design specifications for hydropower headrace and forebay
SL/T 205-1997 Desire standards of hydropower headrace and fore bay
SL/T 205-1997（条文说明） Design standards of hydropower headrace and forebay(explanation)

Professional Standard - Energy

NB/T 11090-2023 Code for Design of Headrace Canal and Forebay for Hydropower Stations
SY/T 7039-2023 Design specifications for steel pipe rack structures in oil and gas plants and stations
NB/T 35056-2015 Design code for steel penstocks of hydroelectric stations

国家能源局

NB/T 35080-2016 Design code for air cushion surge chamber of hydropower stations
SY/T 6968-2021 Design code for oil and gas transmission pipeline installation by horizontal directional drilling
SY/T 7039-2016 Design specifications for steel pipe rack structures in oil and gas plants and stations
NB/T 10858-2021 Code for Design of Hydropower Station Intakes
SY/T 0089-2019 Code for design of water and wastewater for oil/gas plant, station and depot
SY/T 7366-2017 Code for design of oil and gas transmission pipeline crossing engineering by open cut method in water areas
SY/T 7038-2016 Specifications for special road design of oil-gas fields and pipelines

Professional Standard - Petroleum

SY/T 7023-2014 Code for design of oil and gas transmission pipeline crossing by shield tunneling
SY/T 6793-2010 Code for Design of Oil and Gas Transportation Pipeline Hydraulic Protection
SY/T 0085-1994 Standard of test method for ecposure to natural weathering of pipeline protective coating
SY/T 0089-1996 Code for design of water and wastewater for oil-gas plant station and depot
SY/T 6793-2018 Code for design of oil and gas transportation pipeline hydraulic protection
SY 7038-2016 Code for Design of Special Roads for Oil and Gas Fields and Pipelines
SY/T 6968-2013 Design Code for Oil and Gas Transmission Pipeline Installation by Horizontal Directional Drilling
SY/T 0089-2006 Code for design of water and wastewater for oil/gas plant station and depot
SY/T 6853-2012 Code for design on tunnel of oil and gas transportation pipeline
SY 6968-2013 Design specification for horizontal directional drilling crossing of oil and gas pipeline engineering
SY 7023-2014 Code for design of shield tunnel crossing in water area for oil and gas transmission pipeline engineering
SY 7022-2014 Code for Design of Pipe Jacking Tunnel Crossing in Water Area of Oil and Gas Transmission Pipeline Engineering
SY/T 7022-2014 Code for design of oil and gas transmission pipeline crossing by pipe jacking in water areas

Professional Standard - Railway

TB 10066-2000 Code for design of road and drainage for railway station and yard

Group Standards of the People's Republic of China

T/LCH 017-2024 Technical specifications for construction of municipal road and urban construction sewage pipeline projects
T/CECS 20005-2021 Guidelines for the design and operation management of sludge deep dewatering process in urban sewage treatment plants
T/CEC 5047-2021 Design guidelines for traffic road engineering in pumped storage power stations
T/CSPSTC 103-2022 Engineering specification for design of hydrogen transmission pipeline
T/ZAMA 1002-2023 Urban municipal sewage treatment and pipeline construction specifications
T/GXAS 673-2024 Guidelines for construction of sewage discharge pumping station

国家市场监督管理总局、中国国家标准化管理委员会

GB 37483-2019 Minimum allowable values of energy efficiency and energy efficiency gradesfor rotary aerator in wastewater treatment
GB/T 38220-2019 Technical requirements of assessment for high efficiency water pollutants control equipment—Rotary aerator

Military Standard of the People's Republic of China-General Armament Department

GJB 2851-1997 Specification for microporous ceramic aeration elements for marine sewage treatment plants

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 50451-2008 Code for design of puming station and pipeline of under coal mine
GB 50251-2003 Code for design of gas transmission pipeline engineering
GB/T 50451-2017 Code for design of pumping station and pipeline under coal mine
GB 50030-2013 Oxygen Station Design Specifications
GB 50873-2013 Design code for piping of water supply and drainage in chemical industry
GB 50251-2015 Design code for gas transmission pipeline engineering
GB 50030-1991 Norm of oxygen plant design
GB 50030-1991(条文说明) Norm of oxygen plant design
GB 50177-2005 Design code for hydrogen station
GB 50332-2002 Structural design code for pipelines of water supply and waste water engineering

交通运输部

JT/T 1147.3-2020 Technical requirements for sewage treatment facility in highway service area-Part 3: Biological aerated filter treatment system

Professional Standard - Petrochemical Industry

SH 3034-2012 Specification for design of water supply and drainage pipe in petrochemical industry
SH 3034-1999 Code for the piping design of watersupply and drainage in petrochemical industry
SH 3089-1998 Design legend of water supply and drainage piping for petrochemical industry

Sichuan Provincial Standard of the People's Republic of China

DB51/T 1184-2011 Code for design of rural domestic sewage purification biogas engineering

RO-ASRO

STAS 3051-1981 Sewerage systems CHANNELS OF EXTERNAL SEWERAGE NETWORKS Basic design rules
STAS 9296-1988 water supplies and sewages gasous chlorine dosage stations for water decontamination design general specilications
STAS 1846-1990 Outer sewage. Determination of sewage water discharges. Design specifications
STAS 10859-1984 Sewerages WASTE WATER TRATEMENT STATIONS RESULTED ROM POPULATED CTNTRES Studies for designing
STAS 2448-1982 Sewerages MANIIOLES Desigii rules

SCC

AWWA JAW3911 Journal AWWA — Design of Aeration Towers to Strip Volatile Contaminants From Drinking Water
AS A146:1970 Cast iron fittings for pipes for water, gas and sewage
AS A145:1965 Centrifugally cast iron pressure pipes for water, gas and sewage
AS A145:1970 Centrifugally cast iron pressure pipes for water, gas and sewage
NS-EN 12255-15:2003 Wastewater treatment plants — Part 15: Measurement of the oxygen transfer in clean water in aeration tanks of activated sludge plants
ANS 58.2-1980 Design Basis for Protection of Light Water Nuclear Power Plants Against the Effects of Postulated Pipe Rupture
AENOR UNE-EN 12255-15:2004 Wastewater treatment plants - Part 15: Measurement of the oxygen transfer in clean water in aeration tanks of activated sludge plants
CSA B182.2-1999 PVC Sewer Pipe and Fittings (PSM Type)
CSA B182.2-1995 PVC Sewer Pipe and Fittings (PSM Type)
BS 8005-2:1987 Sewerage-Guide to pumping stations and pumping mains
CAN/CSA-B182.2-M90-1990 PVC Sewer Pipe and Fittings (PSM Type)
DANSK DS/EN 12255-15:2004 Wastewater treatment plants - Part 15: Measurement of the oxygen transfer in clean water in aeration tanks of activated sludge plants
BS CP 2010-4:1972 Pipelines-Design and construction of asbestos cement pipelines in land
CSA B182.4-1999 Profile PVC Sewer Pipe and Fittings
CAN/CSA-B182.4-1992 Profile PVC Sewer Pipe and Fittings
CSA B182.4-1997 Profile PVC Sewer Pipe and Fittings
AS A146:1965 Cast iron pipe fittings for water, gas and sewage
AWWA ACE95100 Design of Pipeline Hydraulic Flocculators
NS 2941:1972 PEH pipes and fittings for sewage and drainage

Japanese Industrial Standards Committee (JISC)

JIS A 7501:2013 Planning for sewer system maintenance

PL-PKN

PN B10710-1992 Canalisation. Hydraulic calculations of waste water sewers
PN B10729-1992 Canalisation. Sewerage chambers
PN B02711-1990 Canalisation Continuing measurements of volumetric rate of flow in non pressure sewerage pipes Desing principles
PN B01707-1992 Installations for sewage. Design
PN B12751-1968 Stoneware sewage pipes and pipe (i??ings Dimensions

U.S. Military Regulations and Norms

ARMY UFGS-33 30 00-2008 SANITARY SEWERS
ARMY UFGS-46 07 53.13-2011 PACKAGED WASTEWATER TREATMENT EQUIPMENT, AERATION

HU-MSZT

MSZ 10 311-1981 Water equipment. closed sewer pipe
MSZ MI 10 167/2-1975 Pipeline design. water supply network
MSZ 04 511-1975 Sewage purification and sewage purification construction. design standards
MSZ MI 10 167/3-1975 Design of public pipelines. water conservancy survey

ES-UNE

UNE 53929:2022 Plastics. Rehabilitation of supply and sewerage pipes with continuous cured tubes in situ (CIPP). Design, calculation and installation

American Society of Mechanical Engineers (ASME)

ASME A112.18.8-2020 Sanitary Waste Valves for Plumbing Drainage Systems
ASME STP-PT-006-2007 DESIGN GUIDELINES FOR HYDROGEN PIPING AND PIPELINES
ASME A112.18.8-2009 In-Line sanitary Waste Valves for Plumbing Drainage Systems
ASME A112.18.2/CSA B125.2-2005 Plumbing Waste Fittings
ASME A112.18.2-2011 Plumbing waste fittings
ASME A112.18.2 UPD 2-2007 Plumbing waste fittings
ASME A112.18.2 UPD 1-2006 Plumbing waste fittings
ASME A112.18.2-2015 Plumbing waste fittings
ASME A112.18.2/CSA B125.2-2015 Plumbing Waste Fittings
ASME STP-PT-006-2008 STP-PT-006 Design Guidelines for Hydrogen Piping and Pipelines

British Standards Institution (BSI)

BS EN 12255-15:2003 Wastewater treatment plants - Measurement of the oxygen transfer in clean water in aeration tanks of activated sludge plants
BS 7843-1:2012 Acquisition and management of meteorological precipitation data from a raingauge network. Guide for the design, development and review of a raingauge network
BS ISO 23466:2020 Design criteria for the thermal insulation of reactor coolant system main equipments and piping of PWR nuclear power plants
BS 7843-1:2011 Acquisition and management of meteorological precipitation data from a raingauge network. Guide for the design, development and review of a raingauge network
BS EN 773:1999 General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers

US-FCR

FCR UFGS-46 07 53.13-2011 PACKAGED WASTEWATER TREATMENT EQUIPMENT, AERATION

German Institute for Standardization

DIN 19569-7:2008-10 Sewage treatment plants - Principles for the design of structures and technical equipment - Part 7: Station for the transfer of faecal sewage
DIN EN 12255-15:2004 Wastewater treatment plants - Part 15: Measurement of the oxygen transfer in clean water in aeration tanks of activated sludge plants; German version EN 12255-15:2003
DIN 19667:1991 Drainage of landfills; code of practice for design, construction and operation
DIN 19569-7:2008 Sewage treatment plants - Principles for the design of structures and technical equipment - Part 7: Station for the transfer of faecal sewage
DIN 2425-4:1980 Plans for Public Utilities, Water Resources and Long-distance Lines; Sewer Network Drawings of Public Sewerage Systems
DIN 4263:2011 Geometrical values of drains and sewers for hydraulic design for water and waste water engineering
DIN EN 12255-15:2004-04 Wastewater treatment plants - Part 15: Measurement of the oxygen transfer in clean water in aeration tanks of activated sludge plants; German version EN 12255-15:2003
DIN 19569-7:1999 Sewage treatment plants - Principles for the design of structures and technical equipment - Part 7: Station for the transfer of faecal sewage

AT-ON

ONORM M 5888-1998 Measurement of oxygen transfer of aeration equipment in clean water and activated Sludge
ONORM B 5012-2-1995 Structural design of buried water and sewerage pipelines for housing and industry - Load assumptions, method of calculation
ONORM B 5012 Teil.1-1990 Stattc calculation of buried pipelines for water supply and sewerage; principles
ONORM B 5012 Teil.1 Beib-1990 Stattc calculation of buried pipelines for water supply and sewerage; required particulars

Association Francaise de Normalisation

NF P16-700-15*NF EN 12255-15:2004 Wastewater treatment plants - Part 15 : measurement of the oxygen transfer in clean water in aeration tanks of activated sludge plants
NF EN 12056-4:2000 Gravity evacuation networks inside buildings - Part 4: effluent lifting stations - Design and calculations
NF P16-125:1997 Construction and testing of drains and sewers.

American Society for Testing and Materials (ASTM)

ASTM A888-15 Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
ASTM A888-18 Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
ASTM A888-17a Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
ASTM C1417-08 Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design
ASTM C1577-07a Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD
ASTM C1577-07 Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD
ASTM C1417M-11 Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric)
ASTM C1417M-08 Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric)
ASTM A796/A796M-13a Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
ASTM A796/A796M-06 Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
ASTM A796/A796M-10 Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
ASTM A796/A796M-13 Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
ASTM E1810-96 Standard Practice for Evaluating Effects of Contaminants on Odor and Taste of Exposed Fish
ASTM E1810-96(2004) Standard Practice for Evaluating Effects of Contaminants on Odor and Taste of Exposed Fish

IN-BIS

IS 7181-1986 Specification for horizontal cast iron double flange pipes for water, gas and sewage
IS 1538 Pt.23-1976 Specification for vertical cast iron pressure pipes for water, gas and sewage
IS 1537-1976 Specification for vertical cast iron pressure pipes for water, gas and sewage
IS 11625-1986 Hydraulic design standards for pressure pipelines
IS 1538 Pt.2-1976 Specification for cast iron fittings for water, gas and sewage pressure pipes Part II Specific requirements for pipe sockets and sleeves
IS 1538 Pt.4-1976 Specification for Cast Iron Fittings for Water, Gas and Sewer Pressure Pipes Part IV Particular Requirements for Pipe and Fitting Flanges
IS 1538 Pt.1-1976 Specification for cast iron fittings for water, gas and sewage pressure piping Part Ⅰ General requirements

Canadian Standards Association (CSA)

CSA B125.2-05 UPD 2-2007 Plumbing waste fittings [Replaced: CSA B125-01, CSA B125-01, CSA B125-98, CSA B125-93]
CSA B125.2-05 UPD 1-2006 Vidanges de robinetterie sanitaire Mise ?jour no 1
CSA B602-05 UPD 1-2007 Mechanical Couplings for Drain, Waste, and Vent Pipe and Sewer Pipe

ANS - American Nuclear Society

58.2-1988 Design Basis for Protection of Light Water Nuclear Power Plants Against Effects of Postulated Pipe Rupture

American National Standards Institute （ANSI)

ANSI/ASME A112.18.2-2005 Plumbing Fixture Waste Fittings

TH-TISI

TIS 1410-1997 Unplasticized polyvinyl chloride pipe fittings for soil, waste and vent (swv) applications

CZ-CSN

CSN OIV 73 6624-1966 Designing of drinking and service water pump stations

GOST

GOST 22689.3-1977 Plastic sewer pipes and fittings for them. Pipes. Design and dimensions
GOST R 59115.15-2021 Rules for strength assessment of equipment and pipelines of nuclear power installations. Strength analysis of typical pipelines components
GOST R 59115.10-2021 Rules for strength assessment of equipment and pipelines of nuclear power installations. Confirmatory analysis on stage of design

RU-GOST R

GOST 8020-1990 Concrete and reinforced concrete structures for holes in sewage, water and gas supply pipelines. Specifications

PT-IPQ

D H 171-1981 pipeline. Sewage and water supply pipeline related attributes
D H 94-1974 pipeline. Sewage and water supply pipeline related attributes
D H 139-1978 pipeline. Sewage and water supply pipeline related attributes

American Society of Civil Engineers (ASCE)

ASCE MOP 108-2014 Pipeline Design For Installation By Horizontal Directional Drilling
ASCE MOP 60-2007 Gravity Sanitary Sewer Design and Construction (Second Edition)

Indonesia Standards

SNI 03-6367-2000 Specification of concrete sewer, drain pipes, and culvert pipes

Institute of Electrical and Electronics Engineers (IEEE)

IEEE P422_D2, September 2011 IEEE Draft Guide for the Design of Cable and Raceway Systems in Electric Generating Stations

YU-JUS

JUS U.N8.050-1990 Concrete pipes forsevverage. Testing of pipeline inthe field

International Organization for Standardization (ISO)

ISO 11120:1999/Amd 1:2013 Gas cylinders — Refillable seamless steel tubes for compressed gas transport, of water capacity between 150 l and 3000 l — Design construction and testing — Amendment 1: Requirements for design of tub

International Telecommunication Union (ITU)

ITU-T L.159-2008 Installation of optical fibre cables inside sewer ducts

AENOR

UNE 199072-3:2017 Road traffic management equipment. Air monitoring stations on roads. Part 3: Equipment

ZA-SANS

SANS 674:2008 Steel-reinforced spirally wound PE drainage and sewer pipes

Others: