Aluminum wire bonding wire fuse current test standard

Aluminum wire bonding wire fuse current test standard, Total:59 items.

The international standard classification for "Aluminum wire bonding wire fuse current test standard" includes: Other non-ferrous metals and their alloys , Semiconducting materials , Aluminium products , Electronic tubes .

The Chinese standard classification for "Aluminum wire bonding wire fuse current test standard" includes: Precious metals and their alloys , Semimetal , Light metals and their alloys , Electron tube in general , Technical Management , Material and component for instrument and meter .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 26041-2010 Silver and silver alloy wire/strip for flow-limited fuse
GB/T 8646-1998 Fine aluminum-1% silicon wire for semiconductor lend-bonding

Professional Standard - Non-ferrous Metal

YS/T 543-2006 Fine aluminum-1% silicon wire for semiconductor lend-bonding
YS/T 368-2015 Test method of thermo-emf for noble metal thermocouple wires―Fuse wire
YS/T 641-2007 Aluminium wire for semiconductor lead bonding

工业和信息化部

YS/T 543-2015 Standard specification for fine aluminum-1% silicon wire for semiconductor lead-bonding

Professional Standard - Electron

SJ/T 11082-2000 Measuring methods of the heater or filament current and voltage for electronic tubes
SJ/Z 9010.2-1987 Measurements of electrical properties of electronic tubes and valves--Part 2: Measurement of heater or filament current
SJ/T 11082-1996 Measuring methods of the heater or filament current and voltage for electronic tubes
SJ 1387-1978 Methods of measurement for filament current and filament voltage of noise-generator diodes

Military Standard of the People's Republic of China-General Armament Department

GJB 5309.26-2004 Test methods for pyrotechnics Part 26: Determination of bridge wire fusing time

Professional Standard - Machinery

JB/T 6820-1993 Test Method of Thermal Electromotive Force for Refractory Metal Thermocouple Wire

British Standards Institution (BSI)

BS 2692-2:1956 Fuses for voltages exceeding 1000 V a.c. Expulsion fuses
BS 6553:1984 Guide for selection of fuse links of high-voltage fuses for transformer circuit applications
BS EN IEC 60127-8:2018 Miniature fuses. Fuse resistors with particular overcurrent protection
BS EN 13920-3:2003 Aluminium and aluminium alloys - Scrap - Wire and cable scrap

Defense Logistics Agency

DLA A-A-59306/1 B-2012 FUSE CARTRIDGE, CLASS T, 300 VOLTS AC, FAST ACTING
DLA A-A-59306/2 B-2012 FUSE CARTRIDGE, CLASS T, 600 VOLTS AC, FAST ACTING
DLA A-A-59703 A-2006 FUSE CARTRIDGE, TIME-DELAY, CLASS J, 600 VOLTS (V), BLOWN FUSE INDICATION
DLA A-A-59705 A-2006 FUSE CARTRIDGE, LOW-VOLTAGE, CLASS RK5, BLOWN FUSE INDICATION, GENERAL REQUIREMENTS FOR
DLA A-A-59704 A-2006 FUSE CARTRIDGE, DUAL-ELEMENT, TIME-DELAY, CLASS RK1 600 VOLTS (V), BLOWN FUSE INDICATION
DLA W-F-1814/48 B-2003 FUSE, CARTRIDGE, HIGH INTERRUPTING CAPACITY, CLASS L (CURRENT-LIMITING) 600 VOLTS, 801-1200 AMPERES

American National Standards Institute （ANSI)

ANSI C37.46-2000 Power Fuses and Fuse Disconnecting Switches, Specifications for
ANSI/IEEE C37.42:2009 Standard for Specifications for High Voltage( 1000 Volts) Expulsion Type Distribution Class Fuses, Fuse and Disconnecting Cutouts, Fuse Disconnecting Switches and Fuse Links and Accessories Used with These Devices

YU-JUS

JUS N.E5.530-1990 High-voltage fuses.Determination of short-circuit power factor for testing cur-rent-limiting fuses and expulsion and similar fuses
JUS N.E5.721-1991 Hlnlature fuses. Cartrldge fuse-links for miniature fuses. Mditional require- ments and test equlpment
JUS N.E5.740-1991 Hlniature fuses. Cartrldge fuse links 5 mm x 20 mm. QuJck~actiog. Bigb-breakiag capacity
JUS N.E5.741-1991 Miniature fuses. Cartrldge fuse links 5 mm x 20 mm. Quick-acting. Lem breaking capacity
JUS N.E5.742-1991 Minlature fuses. Cartri?ge fuse links 5 mm x 20 mm. Time-lag. Lcm-breaking capa- city
JUS N.E5.743-1991 Minlature fuses. Cartridge fuse liaks 6 ,3 mm x 32 mm. Qvick-acting. Lem breaking capaclty
JUS N.E5.515-1990 High volt age fnse.s. Specifdcation for high-voltagc. fuse-links for motor circuit applications

SCC

UNE 21120-3:1992 HIGH-VOLTAGE FUSES. DETERMINATION OF SHORT-CIRCUIT POWER FACTOR FOR TESTING CURRENT-LIMITING FUSES AND EXPULSION AND SIMILAR FUSES.
AENOR UNE 21120-3:1992 High voltage fuses. Determination of the power factor of a short circuit during testing of current-limiting fuses and expulsion fuses and similar types.
CSA C254.2-1976 Design Tests for Distribution Cutouts and Fuse Links

Standard Association of Australia （SAA）

AS 1033.2:1988 High voltage fuses (for rated voltages exceeding 1000 V) - Current-limiting (powder-filled) type

Japanese Industrial Standards Committee (JISC)

JIS C 4611:1993 High-voltage alternating current switch-fuse combinations

GSO

OS GSO IEC 60282-3:1997 High voltage fuses. part3 : Determination of short circuit power factor for testing current - limiting fuses and expulsion and similar fuses.

ZA-SANS

NRS 035-1-2002 Outdoor distribution cut-outs Part 1: Drop-out fuse-link assemblies or solid-link assemblies - Pole-mounted types - For nominal a.c. voltages up to and including 33 kV
NRS 035-2-2002 Outdoor distribution cut-outs Part 2: Expulsion fuse-links - For nominal a.c. voltages up to and including 33 kV

SE-SIS

SIS SS 11 23 17-1987 Aluminium - Wire for stranded onductors for overhead lines - Non-interrupted creep testing

IN-BIS

IS 9926-1981 Specification for fuses used in rewirable electrical fuses up to 650 volts

European Committee for Electrotechnical Standardization（CENELEC）

EN IEC 60127-8:2018 Miniature fuses - Part 8: Fuse resistors with particular overcurrent protection

HU-MSZT

MNOSZ 22662-1956 High voltage electrical disc fuse, fast blow, 24V and 500A
MNOSZ 22659-1956 High voltage electrical disc fuse, fast blow, 24V and 4A
MNOSZ 22653-1956 High voltage electrical disc fuse, delayed blow, 380V, 6 to 60A
MNOSZ 22655-1956 High voltage electrical disc fuse, delayed blow, 380V, 80 to 200A
MNOSZ 22657-1956 High voltage electrical disc fuse, delayed blow, 220V, 6 to 35A

International Electrotechnical Commission (IEC)

IEC 60644:2009 Specification for high-voltage fuse-link for motor circuit applications

TR-TSE

TS 2442-1976 MEASUREMENTS OF THE ELECTRICAL PROPERTIES OF ELECTRONIC TUBES AND VALVES PART 2 : MEASUREMENT OF HEATER OR FILAMENT CURRENT

Korean Agency for Technology and Standards (KATS)

KS C 4615-2002 HIGH-VOLTAGE ALTERNATING CURRENT SWITCH-FUSE COMBINATIONS
KS B ISO 18273:2004 Welding consumables-Wire electrodes, wires and rods for welding of aluminium and aluminium alloys-Classification

Institute of Electrical and Electronics Engineers (IEEE)

IEEE Unapproved Draft Std PC37.41/D8, Mar 2008 IEEE Draft Standard Design Tests for High-Voltage (>1000 V) Fuses, Fuse and Disconnecting Cutouts, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Fuse Links and Accessories Used With These Devices.

RU-GOST R

GOST 21011.6-1978 High-voltage kenotrons. Test method for multiple switching on and switching off the heating voltage

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE C37.41 ERTA-2009 Errata to IEEE Standard Design Tests for High-Voltage (>1000 V) Fuses@ Fuse and Disconnecting Cutouts@ Distribution Enclosed Single-Pole Air Switches@ Fuse Disconnecting Switches@ and Fuse Links and Accessories Used with These Devices
IEEE C37.41-2009 Errata to IEEE Standard Design Tests for High-Voltage (>1000 V) Fuses@ Fuse and Disconnecting Cutouts@ Distribution Enclosed Single-Pole Air Switches@ Fuse Disconnecting Switches@ and Fuse Links and Accessories Used with These Devices

AT-ON

ONORM E 6020-1989 Low-voltage high-rupturing-capacity fuses 500 V a. c. and 440 V d. c. and 660 V a. c.; LV HRC fuse links with blade contacts

German Institute for Standardization

DIN EN ISO 18273:2004 Welding consumables - Wire electrodes, wires and rods for welding of aluminium and aluminium alloys - Classification (ISO 18273:2004); German version EN ISO 18273:2004
DIN 41664:1974 Miniature fuses; screw-type fuse holders, 6,3 A, 250 V, affording protection against contact with live parts, for interchangeable cartridge fuse-links, fuse-base, fuse-carrier

CZ-CSN

CSN 01 5056-1990 Non-destructive testing. Testing of steel wires by eddy current method

Others: