Flow resistance and pressure drop test

Flow resistance and pressure drop test, Total:285 items.

The international standard classification for "Flow resistance and pressure drop test" includes: Paints and varnishes , Electrical wires and cables , Valves in general , Measurement of electrical and magnetic quantities , Electrical and electronic testing , Rectifiers. Convertors. Stabilized power supply , Immunity , Other semiconductor devices , Testing of metals in general , Aerospace electric equipment and systems , Electrical accessories , Electrical equipments for working in special conditions in general , Aluminium and aluminium alloys .

The Chinese standard classification for "Flow resistance and pressure drop test" includes: Technical Management , Basic standard and general method for coating , Cable and its accessory , Valve , Extensive magnitude and exchanger , AC/DC electrical instrument recording instrument , Power semiconductor device and parts , Vessel materials and their inspection methods , Hydraulic and pneumatic device , Electromagnetic compatibility , Micromodule , Metal physical and chemical property test method in general , Electromagnetic Measurement , Sensor elements , Electronic components , Low-voltage distribution tool , Fuel system and its accessories , Complete equipment for high voltage device , Metal physical property test method .

Professional Standard - Electron

SJ 446-1973 Methods of measurement for tube voltage drop and tube voltage drop on underheated condition of high-voltage rectifier tubes
SJ 1395-1978 Methods of measurement for anode current and tube voltage drop of gas discharge noise tubes
SJ 449-1973 Methods of measurement for voltage with standing test for high-voltage rectifier tubes
SJ 1786-1981 Method of measurement for forward voltage of silicon single phase bridge rectifiers,up to 5A
SJ 454-1973 Methods of measurement for peak voltage drop of tube, reverse peak voltage drop of tube and rectifying current of high-voltage rectifier tubes
SJ 447-1973 Methods of measurement for pulse tube voltage drop and pulse tube voltage drop on underheated condition of high-voltage rectifier tubes

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 30832-2014 Valves―Test method of flow coefficient and flow resistance coefficient
GB/T 43534-2023 Design and testing methods for AC side impedance of voltage source converter based high voltage direct current（VSC-HVDC） transmission
GB/T 3048.4-1994 Test methods for determining electrical properties of electric cables and wires-Measurement of D.C. resistance of conductors
GB/T 17486-2006 Hydraulic fluid power - Filters - Evaluation of differential pressure versus flow characteristics
GB/T 3928-1983 D.C.resistive volt ratio boxes
GB/T 9327.2-1988 Test methods for compression and mechanical connectorsfor conducters of power cables--Test methods for measuremcnt of D.C resistance of connectors
GB/T 7791-2014 Test method for performance of reducing frictional resistance of antifouling coatings
GB/T 17626.29-2006 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Voltage dips short interruptions and voltage variations on d.c. input power port immunity tests
GB/T 8107-1987 Hydraulic fluid power-Valves-Method of determining pressure diffrential-Flow characteristics
GB/T 42191-2023 Test methods of the performances for MEMS piezoresistive pressure-sensitive device
GB/T 33348-2024 Voltage sourced converter valves for high-voltage direct current power transmission—Electrical testing
GB/T 3048.6-1994 Test methods for determining electrical properties of electric cables and wires-Determining insulation resistance-Voltmeter-ammeter method
GB/T 3928-2008 D．C．resistive volt ratio boxes
GB/T 17626.34-2012 Electromagnetic compatibility—Testing and measurement techniques—Voltage dips,short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase
GB/T 7791-1987 Test method for performance of reduces frictional resistance of self-polishing antifouling coatings--Method of round dish rotor moments
GB 7791-1987 Test method for performance of reduces frictional resistance of self - Polishing antifouling coatings; Method of round dish rotor moments
GB/T 17486-1998 Hydraulic fluid power--Filters--Evaluation of pressure drop versus flow characteristics
GB/T 3048.4-2007 Test methods for electrical properties of electric cables and wires—Part 4:Test of DC resistance of conductors
GB/T 3048.5-1994 Test methods for determining electrical properties of electric cables and wires-Determining insulation resistance-Comparison-galvanometer method
GB/T 22638.6-2008 Test methods for aluminium and aluminium alloy foils - Part 6: Determination of direct current resistance

工业和信息化部

JB/T 14309-2022 Test equipment for valve flow coefficient and flow resistance coefficient

National Metrological Verification Regulations of the People's Republic of China

JJG 531-2003 The DC Resistive Volt Ratio Box
JJG(烟草)02-2014 Verification Regulation of the Cigarettes Draw Resistance and Filter Rods Pressure Drop Instrument
JJG(烟草) 02-2014 Calibration rules for cigarette draw resistance and filter rod pressure drop tester

Professional Standard - Railway

TB/T 3056.1-2002 Diesel locomotive oil filter element pressure drop--Test method for flow characteristics

Professional Standard - Aerospace

QJ 2075-1991 Valve liquid pressure drop test method
QJ/Z 117-1982 Design of Transformer and Choking Coil
QJ 1025-1986 Characteristic and Test Code of Piezoresistance Pressure Transducer

未注明发布机构

SEMI F59-0302 (Reapproved 1108)-2008 TEST METHOD FOR DETERMINATION OF FILTER OR GAS SYSTEM FLOW PRESSURE DROP CURVES
DIN EN 1267 E:2009-07 Industrial valves - Test of flow resistance using water as test fluid
DIN ISO 10100 E:2022-05 Hydraulik fluid power - Cylinders - Acceptance tests

Professional Standard - Machinery

JB/T 8225-1999 Laboratory d.c. resistors
JB/T 5540-1991 DC high resistance resistor. Test method
JB/T 7585-1994 D.C. Low Resistance Tester
JB/T 5296-1991 Valves for General Purposes Test Method of Flow Coefficient and Flow Resistance Coefficient
JB/T 4279.2-1994 Enamelled winding wire test equipment verification method DC resistance test device
JB/T 7585-2013 Tester for direct current low-resistence
JB/T 10821-2008 System power saver for low voltage AC

Professional Standard - Petroleum

SY/T 6215-1996 Test Method of Fluid Loss Reducers for Fracturing

国家能源局

NB/T 14003.2-2016 Shale gas. Fracturing fluid. Part 2:Performance index and testing method for friction reducer
NB/T 10455-2027 Test Guidelines for High Voltage AC Current-Limiting Fuses

Professional Standard - Energy

NB/T 10014-2014 Technical specifications for multi-rate injection/falloff well test in coalbed

Professional Standard - Aviation

HB 8503-2014 Pressure drop test methods for fuel system components of civil aircraft
HB 6778-1993 Pressure Decline Test Method for Aircraft Fuel System Attachments

Professional Standard - Electricity

DL/T 979-2005 Verification regulation of high voltage D.C. resistance box
DL/T 377-2010 The acceptance tests of high voltage direct current equipment

Taiwan Provincial Standard of the People's Republic of China

CNS 12395-1988 Method of Test for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus
CNS 7632-1981 Method of Measuring Voltage Drop on Closed Contacts Where Over 100 Amperes Flow Through the Contacts
CNS 6060-1983 Method of Test for Low-Voltage Cut Outs

Hubei Provincial Standard of the People's Republic of China

DB42/T 397-2006 Verification Criterion of Meter for Testing voltage drop of voltage transformer secondary cicuit

Military Standard of the People's Republic of China-General Armament Department

GJB 360.29-1987 Test methods for electronic and electrical components DC resistance test

Professional Standard - Non-ferrous Metal

YS/T 455.5-2003 Test method for aluminium foil Part 5: Test method for direct-current resistance

Group Standards of the People's Republic of China

T/CAS 529-2021 Test methods of conductor DC resistance for short samples of electric cables and wires
T/CI 13-2023 Technical Specification for Urban Rainfall Runoff Experiments

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 22638.6-2016 Test methods for aluminium and aluminium alloy foils--Part 6: Determination of direct current resistance
GB/T 33348-2016 Voltage sourced converter valves for high一voltage direct current power transmission一Electrical testing

PL-PKN

PN E06512-1989 D.c.volt resistive ratio boxes General requirements and tests
PN E04063-07-1987 On-load tap changers Test methods Transition impedances

Association Francaise de Normalisation

NF C42-160*NF EN 60477:1998 Laboratory d.c. resistors.
NF C42-160-2*NF EN 60477-2:1998 Laboratory resistors. Part 2 : laboratory a.c. resistors.
NF A82-025:1986 Electric resistance welding. Machines for electric resistance welding with rectified current. Specifications and tests.
NF E29-321*NF EN 1267:2012 Industrial valves - Test of flow resistance using water as test fluid.
NF ISO 4548-1:1988 Test methods for full-bore lubricating oil filters for internal combustion engines - Part 1: flow/pressure loss characteristic
NF E37-401*NF ISO 4548-1:1988 Methods of test for full-flow lubricating oil filters for internal combustion engines. Part 1 : pressure drop/flow characteristics.
NF C26-287*NF EN 61621:1998 Dry, solid insulating materials. Resistance test to high-voltage, low-current arc discharges.
NF A82-045:1986 Electric resistance welding. Rectifier equipment for resistance welding machines. Specifications and tests.
NF A89-574*NF EN ISO 17654:2011 Resistance welding - Destructive tests of welds - Pressure test of resistance seam welds
NF C93-400-5-2*NF EN 60512-5-2:2002 Connectors for electronic equipment - Tests and measurements - Part 5-2 : current-carrying capacity tests - Test 5b : current-temperature derating.
NF C42-161*NF EN 60524:1993 Direct-current resistive volt ratio boxes.
NF E48-032:2002 Hydraulic fluid power - Cylinders - Acceptance tests.
NF C93-400-21-1*NF EN 60512-21-1:2011 Connectors for electronic equipment - Tests and measurements - Part 21-1 : R.F. resistance tests - Test 21a : R.F. shunt resistance.
NF EN IEC 60477-2:2022 Laboratory resistors - Part 2: Alternating current laboratory resistors
NF EN IEC 60477-1:2022 Laboratory resistors - Part 1: DC laboratory resistors
NF C93-400-2-2*NF EN 60512-2-2:2003 Connectors for electronic equipment - Tests and measurements - Part 2-2 : electrical continuity and contact resistance tests - Test 2b : contact resistance - Specified test current method.
NF ISO 4548-3:1988 Test methods for full-flow lubricating oil filters for internal combustion engines - Part 3: resistance to high pressure losses and high temperatures
NF ISO 3968:2017 Hydraulic transmissions - Filters - Evaluation of pressure loss depending on flow

German Institute for Standardization

DIN EN 1267:2012-04 Industrial valves - Test of flow resistance using water as test fluid; German version EN 1267:2012
DIN 51911:1997 Testing of carbon materials - Determination of specific electrical resistance by the current-voltage method - Solid matters
DIN EN 1267:2012 Industrial valves - Test of flow resistance using water as test fluid; German version EN 1267:2012
DIN 46453-6:1986-07 Winding wires; resistance wires, test method of the temperature coefficient of the direct current resistance
DIN EN ISO 17654:2011-12 Resistance welding - Destructive tests of welds - Pressure test of resistance seam welds (ISO 17654:2011); German version EN ISO 17654:2011
DIN 51911:2020 Testing of carbonaceous materials - Determination of specific electrical resistance by the current-voltage method - Solid materials
DIN EN 60524:1994 Direct-current resistive volt ratio boxes (IEC 60524:1975 + A1:1981); German version EN 60524:1993
DIN EN 61621:1999 Dry, solid insulating materials - Resistance test to high-voltage, low-current arc discharges (IEC 61621:1997); German version EN 61621:1997
DIN 51919:1999 Testing of carbonaceous materials - Determination of the electrical resistivity of electrodes according to the current-voltage method; solid materials
DIN EN 60477:1999 Laboratory d.c. resistors (IEC 60477:1974 + A1:1997); German version EN 60477:1997 + A1:1997
DIN 51919:2013 Testing of carbonaceous materials - Determination of the electrical resistivity of electrodes according to the current-voltage method - Solid materials
DIN EN 60477-2:1999 Laboratory resistors - Part 2: Laboratory a.c. resistors (IEC 60477-2:1979 + A1:1997); German version EN 60477-2:1997 + A1:1997
DIN 46453-6:1986 Winding wires; resistance wires, test method of the temperature coefficient of the direct current resistance
DIN 51028:1998 Testing of filter sands for air-raid shelter ventilation - Determination of flow resistance
DIN EN 60512-2-2:2004 Connectors for electronic equipment - Tests and measurements - Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Specified test current method (IEC 60512-2-2:2003); German version EN 60512-2-2:2003

SCC

DANSK DS/EN 1267:2012 Industrial valves - Test of flow resistance using water as test fluid
AENOR UNE-EN 1267:2012 Industrial valves - Test of flow resistance using water as test fluid
NS-EN 1267:1999 Valves — Test of flow resistance using water as test fluid
NS-EN 1267:2012 Industrial valves — Test of flow resistance using water as test fluid
DANSK DS/EN ISO 17654:2011 Resistance welding - Destructive tests of welds - Pressure test of resistance seam welds
09/30202711 DC BS EN 1267. Industrial valves. Test of flow resistance using water as test fluid
AENOR UNE-EN ISO 17654:2012 Resistance welding - Destructive tests of welds - Pressure test of resistance seam welds (ISO 17654:2011)
DIN 55508-3:2022 Packaging test - Leakage test on flexible packagings - Part 3: Pressure drop method
NS-EN ISO 17654:2011 Resistance welding — Destructive tests of welds — Pressure test of resistance seam welds (ISO 17654:2011)
DANSK DS/EN 60512-5-2:2002 Connectors for electronic equipment - Tests and measurements - Part 5-2: Current-carrying capacity tests - Test 5b: Current-temperature derating
10/30208629 DC BS ISO 17654. Destructive tests on welds in metallic materials. Resistance welding. Pressure test on resistance seam welds
BS 6277:1982 Method for determination of pressure drop/flow characteristics of hydraulic fluid power filters
DIN 55508-3 E:2021 Draft Document – Packaging test – Leakage test on flexible packagings – Part 3: Pressure drop method
DANSK DS/EN 60477+A1:1998 Laboratory d.c. resistors
UNE-EN ISO 17654:2003 Destructive tests on welds in metallic materials - Resistance welding - Pressure test on resistance seam welds (ISO 17654:2003)
NS-EN ISO 17654:2003 Destructive tests on welds in metallic materials — Resistance welding — Pressure test on resistance seam welds (ISO 17654:2003)
CEI EN IEC 60477-1:2022 Laboratory resistors Part 1: Laboratory DC resistors
DANSK DS/EN 60477-2+A1:1998 Laboratory resistors – Part 2: Laboratory a.c. resistors
DANSK DS/EN IEC 60477-1:2022 Laboratory resistors – Part 1: Laboratory DC resistors
CEI EN IEC 60477-2:2022 Laboratory resistors Part 2: Laboratory AC resistors
CEI EN 60512-2-2:2003 Connectors for electronic equipment - Tests and measurements - Part 2-2: Electrical continuity and contact resistance tests Test 2b: Contact resistance - Specified test current method
DANSK DS/EN IEC 60477-2:2022 Laboratory resistors – Part 2: Laboratory AC resistors
BS ISO 10100:2001 Hydraulic fluid power. Cylinders. Acceptance tests
BS EN ISO 17654:2003 Destructive tests on welds in metallic materials. Resistance welding. Pressure test on resistance seam welds
08/30178457 DC BS EN 60512-21-1. Connectors for electronic equipment. Tests and measurements. Part 21-1. R.F. resistance tests. Test 21a. R.F. shunt resistance
DANSK DS/EN 60512-2-2:2003 Connectors for electronic equipment - Tests and measurements - Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Specified test current method

Danish Standards Foundation

DS/EN 1267:2012 Industrial valves - Test of flow resistance using water as test fluid
DS/EN ISO 17654:2011 Resistance welding - Destructive tests of welds - Pressure test of resistance seam welds
DS/EN 60524+A2:1998 Direct-current resistive volt ratio boxes
DS/EN 60512-5-2:2002 Connectors for electronic equipment - Tests and measurements - Part 5-2: Current-carrying capacity tests - Test 5b: Current-temperature derating
DS/EN 60477+A1:1998 Laboratory d.c. resistors
DS/IEC 477-2:1981 Laboratory resistors. Part 2: Laboratory a.c. resistors
DS/EN 60477-2+A1:1998 Laboratory resistors - Part 2: Laboratory a.c. resistors

Lithuanian Standards Office

LST EN 1267-2012 Industrial valves - Test of flow resistance using water as test fluid
LST EN ISO 17654:2011 Resistance welding - Destructive tests of welds - Pressure test of resistance seam welds (ISO 17654:2011)

AENOR

UNE-EN 1267:2012 Industrial valves - Test of flow resistance using water as test fluid
UNE-EN ISO 17654:2012 Resistance welding - Destructive tests of welds - Pressure test of resistance seam welds (ISO 17654:2011)
UNE-EN 60524/A2:1999 DIRECT-CURRENT RESISTIVE VOLT RATIO BOXES
UNE-EN 60524:1996 DIRECT-CURRENT RESISTIVE VOLT RATIO BOXES.
UNE-EN 60477/A1:1999 LABORATORY D.C. RESISTORS
UNE-EN 60477:1999 LABORATORY D.C. RESISTORS
UNE-EN 60477-2/A1:1999 LABORATORY RESISTORS. PART 2: LABORATORY A.C. RESISTORS
UNE-EN 60477-2:1999 LABORATORY RESISTORS. PART 2: LABORATORY A.C. RESISTORS

CZ-CSN

CSN 34 6467-1986 Test method for determination of resistance of insulating materials to low-voltage, high-current d.c. arc
CSN 35 6211-1984 Resistance type voltage divider DC. Methods of verification
CSN 35 6206-1984 Kesistive DC voltage dividers. Classification, technical demands and testing methods
CSN 35 1086-1981 Non-rotating electromagnetic machines. Methods of electromagnetic tests and measurement of winding resistance with direct current
CSN 35 6405-1983 DC electrical resistors Methods of verification
CSN ISO 3968:1994 Hydraulic fluid power.Filters.Evaluation of pressure drop versus flow characteristics
CSN 34 5751-1982 Free fall test

Indonesia Standards

SNI 04-6189-1999 Measurements of winding resistance of an alternating current machines during operation at alternating voltage

International Organization for Standardization (ISO)

ISO 4548-1:1982 Methods of test for full-flow lubricating oil filters for internal combustion engines; Part 1 : Pressure drop/flow characteristics
ISO 17654:2011 Resistance welding - Destructive tests of welds - Pressure test of resistance seam welds
ISO 4548-1:1982/Cor 1:1990 Methods of test for full-flow lubricating oil filters for internal combustion engines; part-1: pressure drop/flow characteristics; technical corrigendum 1
ISO 6565:2015 Tobacco and tobacco products - Draw resistance of cigarettes and pressure drop of filter rods - Standard conditions and measurement
ISO 6565:2011 Tobacco and tobacco products - Draw resistance of cigarettes and pressure drop of filter rods - Standard conditions and measurement
ISO 17654:2003 Destructive tests on welds in metallic materials - Resistance welding - Pressure test on resistance seam welds
ISO 3968:2017 Hydraulic fluid power - Filters - Evaluation of differential pressure versus flow
ISO 4548-3:1982 Methods of test for full-flow lubricating oil filters for internal combustion engines; Part 3 : Resistance to high pressure drop and to elevated temperature

GSO

OS GSO ISO 17654:2016 Resistance welding -- Destructive tests of welds -- Pressure test of resistance seam welds
BH GSO ISO 17654:2017 Resistance welding -- Destructive tests of welds -- Pressure test of resistance seam welds
GSO ISO 17654:2016 Resistance welding -- Destructive tests of welds -- Pressure test of resistance seam welds
GSO IEC 60477:2015 Laboratory d.c. resistors
DL/T 474.4-1992 Field test guideline AC withstand voltage test
GSO IEC 60477-2:2015 Laboratory resistors. Part 2: Laboratory a.c. resistors
OS GSO IEC 60477-2:2015 Laboratory resistors. Part 2: Laboratory a.c. resistors
BH GSO IEC 60477-2:2016 Laboratory resistors. Part 2: Laboratory a.c. resistors

Japanese Industrial Standards Committee (JISC)

JIS C 2135:2004 Dry, solid insulating materials -- Resistance test to high-voltage, low-current arc discharges -- Test methods
JIS C 2135:2011 Dry, solid insulating materials.Resistance test to high-voltage low-current arc discharges
JIS C 5402-5-2:2005 Connectors for electronic equipment -- Tests and measurements -- Part 5-2: Current-carrying capacity tests -- Test 5b: Current-temperature derating
JIS C 9311:2011 Voltage reducing devices for AC arc welding power sources
JIS C 9311:1989 Voltage reducing devices for AC arc welding machines
JIS C 5402-2-2:2005 Connectors for electrical equipment -- Tests and measurements -- Part 2-2: Electrical continuity and contact resistance tests -- Test 2b: Contact resistance -- Specified test current method
JIS C 7051:1974 Testing methods for reverse blocking triode thyristors
JIS C 9311:2005 Voltage reducing devices for AC arc welding machines

Standard Association of Australia （SAA）

AS/NZS 4879.1:2008 Performance of transformers and electronic step-down convertors for ELV lamps - Test method - Energy performance

Korean Agency for Technology and Standards (KATS)

KS C 2130-1996 Testing method for high-voltage, low-current, dry arc resistance of solid electrical insulation
KS C 9605-1997(2017) Rectifier type DC arc welding machines with drooping characteristics
KS C IEC 60477-2013(2018) Laboratory resistors－Laboratory d.c. resistors
KS C IEC 60524-2023 Direct-current resistive volt ratio boxes
KS C IEC 60477-2023 Laboratory resistors－Laboratory d.c. resistors
KS C IEC 60512-5-2-2003(2008) Connectors for electronic equipment－Tests and measurements－Part 5－2：Current－carrying capacity tests－Test 5b：Current－temperature derating
KS C IEC 60512-5-2:2014 Connectors for electronic equipment-Tests and measurements-Part 5-2:Current-carrying capacity tests-Test 5b:Current-temperature derating
KS C IEC 60512-5-2:2003 Connectors for electronic equipment-Tests and measurements-Part 5-2:Current-carrying capacity tests-Test 5b:Current-temperature derating
KS C 7023-1978 Testing Methods for Reverse Blocking Triode Thyristors
KS B ISO 17654-2003(2013) Destructive tests on welds in metallic materials－Resistance welding－Pressure tests on resistance seam welds
KS C IEC 60477:2013 Laboratory resistors－Laboratory d.c. resistors
KS C IEC 60524:2013 Direct-current resistive volt ratio boxes
KS C IEC 60524-2013(2018) Direct-current resistive volt ratio boxes
KS B ISO 17654:2014 Destructive tests on welds in metallic materials－Resistance welding－Pressure tests on resistance seam welds
KS B ISO 17654:2003 Destructive tests on welds in metallic materials-Resistance welding-Pressure tests on resistance seam welds
KS H ISO 6565:2007 Tobacco and tobacco products-Draw resistance of cigarettes and pressure drop of filter rods-Standard conditions and measurement
KS H ISO 6565:2016 Tobacco and tobacco products－Draw resistance of cigarettes and pressure drop of filter rods－Standard conditions and measurement
KS C IEC 60477-2-2013(2018) Laboratory resistors－Part 2：Laboratory a.c. resistors
KS C IEC 60477-2-2023 Laboratory resistors－Part 2：Laboratory a.c. resistors
KS B ISO 10100-2013 Hydraulic fluid power－Cylinders－Acceptance tests
KS C IEC 60477-2:2013 Laboratory resistors－Part 2：Laboratory a.c. resistors
KS B ISO 6403-2004(2009) Hydraulic fluid power－Valves controlling flow and pressure－Test methods
KS C IEC 60512-2-2:2009 Connectors for electronic equipment-Tests and measurements-Part 2-2:Electrical continuity and contact resistance tests-Test 2b:Contact resistance-Specified test current method
KS C IEC 60512-2-2:2014 Connectors for electronic equipment－Tests and measurements－Part 2-2：Electrical continuity and contact resistance tests－Test 2b：Contact resistance－Specified test current method
KS C IEC 61047:2003 D.C or a.c supplied electronic step-down convertors for filament Lamps-Performance requirements
KS K ISO 17491-3-2017(2022) Protective clothing — Test methods for clothing providing protection against chemicals — Part 3: Determination of resistance to penetration by a jet of liquid(jet test)

British Standards Institution (BSI)

BS EN 60512-5-2:2002 Connectors for electronic equipment - Tests and measurements - Current-carrying capacity tests - Test 5b - Current-temperature derating
BS EN 60524:1979 Direct-current resistive volt ratio boxes
BS EN IEC 60477-1:2022 Laboratory resistors. Laboratory DC resistors
BS EN 61621:1998 Dry, solid insulating materials - Resistance test to high-voltage, low-current arc discharges
BS EN 60524:1993 Direct-current resistive volt ratio boxes
BS EN IEC 60477-2:2022 Laboratory resistors. Laboratory AC resistors
BS EN 60477-2:1999 Laboratory resistors - Laboratory a.c. resistors
BS EN 60477-2:1980 Laboratory resistors. Laboratory a.c. resistors
BS EN 60512-19-1:2010 Connectors for electronic equipment - Tests and measurements - Chemical resistance tests - Test 19a - Fluid resistance of pre-insulated crimp barrels
BS EN 60512-2-2:2003 Connectors for electronic equipment - Tests and measurements - Electrical continuity and contact resistance tests - Test 2b - Contact resistance - Specified test current method
BS EN ISO 17654:2011 Resistance welding. Destructive tests of welds. Pressure test of resistance seam welds
BS EN 50289-1-2:2001 Communication cables - Specifications for test methods - Electrical test methods - DC resistance - d.c.resistance
BS EN 2349-301:2007 Aerospace series - Requirements and test procedures for relays and contactors - Pick up and drop out voltage
BS EN 2349-301:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 301: Pick-up and drop-out voltage
BS EN 3841-301:2004 Circuit breakers-Test methods-Part 301:Voltage drop
BS EN 3841-301:2005 Aerospace series - Circuit breakers - Test methods - Voltage drop
BS EN 61000-4-34:2007+A1:2009 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase

GM Daewoo

GMKOREA EDS-T-2503-2010 Hysteresis test of hydraulic damping force

European Committee for Standardization (CEN)

prEN 60524-1992 Direct-current resistive volt ratio boxes (IEC 524:1975 + A1:1981)
HD 614 S1-1992 Direct-current resistive volt ratio boxes (IEC 524:1975 + A1:1981)
EN 2349-318:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 318: Pick-up voltage at high temperature and drop-out voltage at low temperature
EN ISO 17654:2003 Destructive tests on welds in metallic materials Resistance welding Pressure test on resistance seam welds ISO 17654:2003
HD 249.2 S1-1981 Laboratory resistors; part 2: laboratory a.c. resistors
EN ISO 17654:2011 Resistance welding - Destructive tests of welds - Pressure test of resistance seam welds (ISO 17654:2011)
HD 249 S1-1977 Laboratory d.c. resistors

Canadian General Standards Board （CGSB)

CGSB 51.71-05-CAN/CGSB-2005 Essai de depressurisation

(U.S.) Telecommunications Industries Association

TIA-455-82B-1992 FOTP 82-B Fluid Penetration Test for Fluid-Blocked Fiber Optic Cable (ANSI APPROVAL WITHDRAWN JUNE 2003)

Association of German Mechanical Engineers

DVS 2916-2-2009 Resistance pressure welding joint test-fatigue strength test

AR-IRAM

IRAM 2128-1956 Resistance of a conductor to electric current (test method)

KR-KS

KS C IEC 60477-2013(2023) Laboratory resistors－Laboratory d.c. resistors
KS C IEC 60477-2-2013(2023) Laboratory resistors－Part 2：Laboratory a.c. resistors
KS C IEC 60512-2-2-2009 Connectors for electronic equipment－Tests and measurements－Part 2-2：Electrical continuity and contact resistance tests－Test 2b：Contact resistance－Specified test current method

FI-SFS

SFS 5135-1985 Evaluation of pressure drop flow characteristics of hydraulic filters

International Electrotechnical Commission (IEC)

IEC 60512-5-2:2002 Connectors for electronic equipment - Tests and measurements - Part 5-2: Current-carrying capacity tests; Test 5b: Current-temperature derating
IEC 60524:1975 Direct-current resistive volt ratio boxes
IEC 60477:1974/AMD1:1997 Amendment 1 - Laboratory resistors. Laboratory d.c. resistors
IEC 60477-2:2022 Laboratory resistors - Part 2: Laboratory AC resistors
IEC 60477:1974 Laboratory d.c. resistors
IEC 60477-1:2022 Laboratory resistors - Part 1: Laboratory DC resistors
IEC 60512-2-2:2003 Connectors for electronic equipment - Tests and measurements - Part 2-2: Electrical continuity and contact resistance tests; Test 2b: Contact resistance; Specified test current method
IEC 61046:1991 D.C. or a.c. supplied electronic step-down converters for filament lamps; general and safety requirements

BE-NBN

NBN-EN 60524-1994 Direct-current resistive volt ratio boxes

American Society for Testing and Materials (ASTM)

ASTM F778-88(2014) Standard Methods for Gas Flow Resistance Testing of Filtration Media
ASTM D495-99(2000) Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation
ASTM C522-03 Standard Test Method for Airflow Resistance of Acoustical Materials
ASTM C522-03(2009)e1 Standard Test Method for Airflow Resistance of Acoustical Materials
ASTM D7044-04a Standard Specification for Biodegradable Fire Resistant Hydraulic Fluids
ASTM D3060-94(2005) Standard Test Method for Pressure Drop Rate of Compressed Gas-Propelled Products
ASTM D3060-94(2013) Standard Test Method for Pressure Drop Rate of Compressed Gas-Propelled Products
ASTM C522-87(1997) Standard Test Method for Airflow Resistance of Acoustical Materials
ASTM D4062-11(2016) Standard Test Method for Leveling of Paints by Draw-Down Method
ASTM D7044-04 Standard Specification for Biodegradable Fire Resistant Hydraulic Fluids
ASTM D3060-94(1999)e1 Standard Test Method for Pressure Drop Rate of Compressed Gas-Propelled Products
ASTM C522-03(2022) Standard Test Method for Airflow Resistance of Acoustical Materials
ASTM C522-03(2016) Standard Test Method for Airflow Resistance of Acoustical Materials
ASTM D5130-95(2014) Standard Test Method for Open-Channel Flow Measurement of Water Indirectly by Slope-Area Method
ASTM D5130-95(1999) Standard Test Method for Open-Channel Flow Measurement of Water Indirectly by Slope-Area Method
ASTM D5130-95(2008) Standard Test Method for Open-Channel Flow Measurement of Water Indirectly by Slope-Area Method
ASTM F778-88(2023) Standard Methods for Gas Flow Resistance Testing of Filtration Media
ASTM C657-93(2003) Standard Test Method for D-C Volume Resistively of Glass

YU-JUS

JUS N.C0.041-1984 Testing ofcables and flexible cords. Resistance to direct voltage

DIN

DIN EN ISO 17654:2003 Destructive tests on welds in metallic materials - Resistance welding - Pressure test on resistance seam welds (ISO 17654:2003)

RU-GOST R

GOST 24690-1981 Aerosoll cans. Testing method of internal pressure resistance
GOST R ISO 3968-2011 Hydraulic fluid power. Filters. Evaluation of differential pressure versus flow characteristics
GOST 21342.9-1976 Varistors. Method of measuring voltage and current
GOST IEC 60477-2-2013 Laboratory resistors. Part 2. Laboratory a.c. resistors
GOST IEC 60477-2013 Laboratory d.c. resistors
GOST 23203-1978 Varistors. Series of currents and classification voltages

The American Road & Transportation Builders Association

AASHTO T 190-2002 Standard Method of Test for Resistance R-Value and Expansion Pressure of Compacted Soils

European Committee for Electrotechnical Standardization（CENELEC）

HD 249.2-1981 Laboratory Resistors Part 2: Laboratory A.C. Resistors
EN IEC 60477-1:2022 Laboratory resistors - Part 1: Laboratory DC resistors
HD 249-1975 Laboratory D.C. Resistors
EN 60512-5-2:2002 Connectors for Electronic Equipment - Tests and Measurements Part 5-2: Current-Carrying Capacity Tests - Test 5b: Current-Temperature Derating

IN-BIS

IS 13617-1992 Evaluation of pressure drop versus flow characteristics of pneumatic filters. Method of test
IS 9269-1979 Test methods for evaluation of pressure drop and flow characteristics of hydraulic filter elements and filters
IS 11509 Pt.3-1985 Test methods for full flow lubricating oil filters for internal combustion engines Part 3 Resistance to high pressure drop and high temperature
IS 11509 Pt.1-1985 Test methods for full flow lubricating oil filters for internal combustion engines Part 1 Pressure drop/flow characteristics

ES-UNE

UNE-EN IEC 60477-2:2022 Laboratory resistors - Part 2: Laboratory AC resistors (Endorsed by Asociación Española de Normalización in July of 2022.)
UNE-EN IEC 60477-1:2022 Laboratory resistors - Part 1: Laboratory DC resistors (Endorsed by Asociación Española de Normalización in July of 2022.)

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE 0687-512-21-1-2010 Connectors for electronic equipment - Tests and measurements - Part 21-1: R.F. resistance tests - Test 21a: R.F. shunt resistance (IEC 60512-21-1:2010); German version EN 60512-21-1:2010

VN-TCVN

TCVN 5179-1990 Hoisting cranes.Test requirements of hydraulic equipments for safety

GB-REG

REG NASA-LLIS-0236-1993 Lessons Learned - Hydraulic Lift Gates

RO-ASRO

STAS SR ISO 3968:1993 Hydraulic fluid power. Filtres. Evaluation of pressure drop versus flow characteristics

CENELEC - European Committee for Electrotechnical Standardization

EN 61046:1994 D.C. or a.c. Supplied Electronic Step-Down Convertors for Filament Lamps - General and Safety Requirements

AT-ON

ONORM ISO 3968:1983 Hydraulik fluid power; filters; evaluation of pressure drop versus flow characteristics

SE-SIS

SIS SS IEC 524:1982 Electrical measuring instruments — Direct current resistive volt ratio boxes

Others: