span ratio of three point bending

span ratio of three point bending, Total:193 items.

The international standard classification for "span ratio of three point bending" includes: Other rubber and plastics products , Raw materials and raw glass , Paper and board , Plastics in general , Advanced ceramics , Refractories .

The Chinese standard classification for "span ratio of three point bending" includes: Other rubber products , Ceramic and glass in general , Papermaking in general , Special ceramics , Fireproof material in general .

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34171-2017 Test method for flexural property of thin and ultrathin glass--Three-point bending method
GB/T 33099-2016 Test methods of stiff’ness for dipped reinforcing material一Three-point bending

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 11546.2-2022 Plastics—Determination of creep behaviour—Part 2:Flexural creep by three-point loading
GB/T 22906.6-2008 Testing of cores—Part 6:Determination of bending strength by three-point method
GB/T 23144-2023 Paper and board—Determination of bending stiffness—General principles for two-point|| three-point and four-point methods

未注明发布机构

ASTM RR-E37-1032 2003 E2092-Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
DIN 51902 E:2020-05 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
ASTM RR-E37-1025 2000 E2092-Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
DIN EN 1966 E:2008-07 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method
ASTM RR-D02-1792 2014 D7972-Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Three-Point Loading at Room Temperature
ANSI/ASAE S459-1992(2017) Shear and Three-Point Bending Test ofAnimal Bone

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 39826-2021 Fine ceramics—Determining flexural bond strength—Four-point bending method
GB/T 38978-2020 Refractory products—Determination of stress-strain (three-point bending method）

Group Standards of the People's Republic of China

T/CSTM 00587-2023 Test method for flexural strength of crystalline silicon cells—Four-point flexural

British Standards Institution (BSI)

BS ISO 5628:2012 Paper and board. Determination of bending stiffness. General principles for two-point, three-point and four-point methods
BS EN 2746:1998 Glass fibre reinforced plastics - Flexural test - Three point bend method
BS ISO 5628:2019 Paper and board. Determination of bending stiffness. General principles for two-point, three-point and four-point methods
BS EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of interlaminar shear strength by short span bend test (three points)
BS EN 658-5:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of interlaminar shear strength by short span bend test (three points)
BS ISO 11093-6:2005 Paper and board. Testing of cores - Determination of bending strength by the three-point method
BS EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Test with specimen supported at two points (four point bending)
BS ISO 11093-7:2011 Paper and board. Testing of cores. Determination of flexural modulus by the three-point method
BS EN ISO 899-2:2003+A1:2015 Plastics. Determination of creep behaviour. Flexural creep by three-point loading
BS 3356:1990(1999) Method for Determination of bending length and flexural rigidity of fabrics
BS 7034-7:1988 Viscosity and viscometric fixed points of glass. Method for the determination of annealing point and strain point by beam bending
BS ISO 23242:2020 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
DD ENV 1966-1996 Structural adhesives. Characterization of a surface by measuring adhesion by means of the three point bending method
BS 7034-4:1988 Viscosity and viscometric fixed points of glass. Method for the determination of viscosity by beam bending
BS 2782-10 Method 1005:1977 Methods of testing plastics. Glass reinforced plastics. Determination of flexural properties. Three point method
BS EN 14617-2:2016 Agglomerated stone. Test methods. Determination of flexural strength (bending)
BS EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
BS PD CEN/TS 15963:2014 Bitumen and bituminous binders. Determination of the fracture toughness temperature by a three point bending test on a notched specimen
19/30375027 DC BS ISO 23242. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
BS EN 310:1993(1999) Wood - based panels — Determination of modulus of elasticity in bending and of bending strength
BS DD CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
BS PD CEN TS 15963:2014 Bitumen and bituminous binders — Determination of the fracture toughness temperature by a three point bending test on a notched specimen

FI-SFS

SFS-ISO 6602 E:1986 This standard is approved in English

German Institute for Standardization

DIN EN 2746:1998-10 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN 51902:1997 Testing of carbon materials - Determination of flexural strength by three point method - Solid matters
DIN 51902:2020-12 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 51902:2020 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN ISO 11093-6:2005-09 Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method (ISO 11093-6:2005)
DIN EN 658-5:2003-03 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three-points); German version EN 658-5:2002
DIN EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending); German version EN 1288-3:2000
DIN EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN EN ISO 899-2:2015-06 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2003 + Amd.1:2015); German version EN ISO 899-2:2003 + A1:2015 / Note: To be replaced by DIN EN ISO 899-2 (2023-03) (in preparation).
DIN EN ISO 899-2:2003 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2003); German version EN ISO 899-2:2003
DIN EN 1288-3:2000-09 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending); German version EN 1288-3:2000 / Note: To be replaced by DIN EN ISO 1288-3 (2007-10).
DIN EN 310:1993-08 Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993

International Organization for Standardization (ISO)

ISO 5628:2019 Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods
ISO 6602:1985 Plastics; Determination of flexural creep by three-point loading
ISO 5628:2012 Paper and board - Determination of bending stiffness - General principles for two-point, three-point and four-point methods
ISO 23242:2020 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
ISO 14679:1997 Adhesives - Measurement of adhesion characteristics by a three-point bending method
ISO/DIS 899-2:1968 Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading
ISO 11093-7:1997 Paper and board - Testing of cores - Part 7: Determination of flexural modulus by the three-point method

SCC

NS-EN 2746:1998 Aerospace series — Glass fibre reinforced plastics — Flexural test — Three point bend method
BS ISO 11093-6:1996 Paper and board. Testing of cores-Determination of bending strength by the three-point method
BS DD ENV 658-5:1993 Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature-Determination of shear strength by short span bend test (three point)
10/30205404 DC BS ISO 5628. Paper and board. Determination of bending stiffness. General principles for two-point, three-point and four-point methods
DANSK DS/EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
DANSK DS/EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points)
AENOR UNE 57163-7:2004 Paper and cardboard cores. Part 7: Determination of flexural strength using the three-point method.
AENOR UNE-ISO 11093-6:2017 Paper and paperboard. Mandrel test. Part 6: Determination of flexural strength by the three-point method.
BS EN ISO 899-2:1997 Plastics. Determination of creep behaviour-Flexural creep by three-point loading
ASD-STAN prEN 6061:1970 Fibre reinforced plastics - Test method - Determination of sandwich flexural strength 4 point bending
DANSK DS/EN 1288-3:2001 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
NS-EN 658-5:2002 Advanced technical ceramics — Mechanical properties of ceramic composites at room temperature — Part 5: Determination of interlaminar shear strength by short span bend test (three points)
DIN 51902 E:2020 Draft Document - Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
UNE 57163-7:2004 Paper and board - Testing of cores - Part 7: Determination of bending strength by the three-point method.
BS ISO 11093-7:1997 Paper and board. Testing of cores-Determination of flexural modulus by the three-point method
07/30046990 DC BS ISO 1288-3. Glazing in building. Determination of the bending strength of glass. Part 3. Test with specimen supported at two points (four point bending)
AS A106:1971 Method for the determination of the flexural strength of concrete flexure test specimens
DANSK DS/EN ISO 899-2:2003 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading
DANSK DS/EN ISO 899-2/A1:2003 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading
AENOR UNE-EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
DANSK DS/EN 310:1993 Wood-based panels - Determination of modulus of elasticity in bending and bending strength
NS-EN 1288-3:2000 Glass in building — Determination of the bending strength of glass — Part 3: Test with specimen supported at two points (four point bending)
UNE-CEN/TS 15963:2010 EX Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
DIN EN 6061 E:1996 Draft Document - Aerospace series - Fibre reinforced plastics - Test method; determination of sandwich flexural strength, 4 point bending
NS-EN 310:1993 Wood-based panels — Determination of modulus of elasticity in bending and of bending strength
AENOR UNE-EN 310:1994 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
DANSK DS/CEN/TS 15963:2014 Bitumen and bituminous binders – Determination of the fracture toughness temperature by a three point bending test on a notched specimen

American Society for Testing and Materials (ASTM)

ASTM D5023-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-01 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-23 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM E2092-03 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18a Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-00 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-04 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D8058-19 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM E2092-13 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D8058-23 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D5023-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM C78/C78M-10e1 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM E2092-09 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM C78/C78M-22 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-15 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM E2092-23 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D7250/D7250M-20 Standard Practice for Determining Sandwich Beam Flexural and Shear Stiffness
ASTM D7972-14(2020) Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Three-Point Loading at Room Temperature
ASTM E2769-18 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM F2606-08(2014) Standard Guide for Three-Point Bending of Balloon Expandable Vascular Stents and Stent Systems
ASTM C78/C78M-10 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM F2606-08 Standard Guide for Three-Point Bending of Balloon Expandable Vascular Stents and Stent Systems
ASTM F2606-08(2021) Standard Guide for Three-Point Bending of Balloon-Expandable Vascular Stents and Stent Systems

American National Standards Institute （ANSI)

ANSI/ASAE S459-1993 Shear and Three-Point Bending Test of Animal Bones
ANSI/ASTM D5023:2001 Test Method for Measuring the Dynamic Mechanical Properties of Plastics Using Three Point Bending (08.03)

Association Francaise de Normalisation

NF T51-120-3:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - - Partie 3 : essai en flexion trois points sur éprouvettes non encastrées.
NF Q03-127:2012 Paper and board - Determination of bending stiffness - General principles for two-point, three-point and four-point methods.
NF P78-343*NF EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3 : test with specimen supported at two points (four points bending).
NF B43-205*NF EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5 : determination of interlaminar shear strength by short span bend test (three points).
NF T30-010:1992 Paints and varnishes. Evaluation of adhesion or cohesion. Three point bending method.
XP CEN/TS 15963:2014 Bitumens and bituminous binders - Determination of the cracking resistance temperature by a 3-point bending test on a notched bar
NF EN ISO 899-2:2003 Plastiques - Détermination du comportement au fluage - Partie 2 : fluage en flexion par mise en charge en trois points
XP T66-078*XP CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
NF T51-120-4:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - Partie 4 : essai en flexion quatre points sur éprouvettes non encastrées.
NF EN 310:1993 Wood-based panels - Determination of flexural modulus of elasticity and flexural strength
NF T76-143*NF EN 1966:2009 Structural adhesives - Characterisation of a surface by measuring adhesion by means of the three point bending method.

Korean Agency for Technology and Standards (KATS)

KS M ISO 5628-2023 Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods
KS M ISO 14679-2022 Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 14679-2007(2022) Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 14679-2007(2017) Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 11093-6:2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS M ISO 11093-6:2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
KS K 0539-2010 Determination of flexural stiffness of fabrics：Flexometer method
KS M ISO 14679:2007 Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 899-2-2016(2021) Plastics－Determination of creep behavior－Part 2：Flexural creep by three-point loading
KS M ISO 899-2-2021 Plastics－Determination of creep behavior－Part 2：Flexural creep by three-point loading
KS M ISO 11093-7:2014 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS M ISO 11093-7:2020 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method

AENOR

UNE-EN 2746:1999 AEROSPACE SERIES. GLASS FIBRE REINFORCED PLASTICS. FLEXURAL TEST. THREE POINT BEND METHOD.
UNE-EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
UNE-EN 310:1994 WOOD-BASED PANELS. DETERMINATION OF MODULUS OF ELASTICITY IN BENDING AND OF BENDING STRENGTH.

RU-GOST R

GOST 34368.2-2017 Plastics. Method of determination of flexural creep by three-point loading
GOST 32281.3-2013 Glass and glass products. Determination of the bending strength. Test with specimen supported at two points (four points bending)
GOST 19921-1974 Glued and bent blanks. Method of determining ultimate strength in static bending

Lithuanian Standards Office

LST EN 2746-2001 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
LST EN 658-5-2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points)
LST EN 1288-3-2002 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
LST EN 310-1999 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength

European Committee for Standardization (CEN)

EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
DD ENV 658-5-1993 Advanced technical ceramics; mechanical properties of ceramic composites at room temperature; part 5: determination of shear strength by short span bend test (three-point)
EN 1288-3:2000 Glass in Building - Determination of the Bending Strength of Glass - Part 3: Test with Specimen Supported at Two Points (Four Point Bending)
EN 63:1977 Glass Reinforced Plastics: Determination of Flexural Properties; Three Point Method
EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method
EN ISO 899-2:1996 Plastics - Determination of Creep Behaviour - Part 2: Flexural Creep by Three-Point Loading ISO 899-2: 1993
EN 310:1993 Wood-based panels; determination of modulus of elasticity in bending and of bending strength

Danish Standards Foundation

DS/EN 2746:1999 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
DS/EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points)
DS/EN 1288-3:2001 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
DS/ENV 658-5:1993 Advanced technical ceramic. Mechanical properties of ceramic composites at room temperature. Part 5: Determination of shear strength by short span bend test (three-point)
DS/CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
DS/EN 310:1994 Wood-based panels - Determination of modulus of elasticity in bending and bending strength
DS/EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
DS/EN ISO 899-2:2003 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading

GSO

BH GSO ISO 14679:2016 Adhesives -- Measurement of adhesion characteristics by a three-point bending method
GSO ISO 14679:2015 Adhesives -- Measurement of adhesion characteristics by a three-point bending method
OS GSO ISO 11093-6:2008 Paper and board -- Testing of cores -- Part 6: Determination of bending strength by the three-point method
GSO ISO 11093-6:2008 Paper and board -- Testing of cores -- Part 6: Determination of bending strength by the three-point method
OS GSO ISO 899-2:2016 Plastics -- Determination of creep behaviour -- Part 2: Flexural creep by three-point loading
GSO ISO 899-2:2016 Plastics -- Determination of creep behaviour -- Part 2: Flexural creep by three-point loading
BH GSO ISO 1288-3:2022 Glass in building — Determination of the bending strength of glass — Part 3: Test with specimen supported at two points (four point bending)
GSO EN 310:2021 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
OS GSO ISO 16978:2009 Wood-based panels- Determination of modulus of elasticity in bending and of bending strength
BH GSO EN 310:2022 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
GSO ISO 1288-3:2021 Glass in building — Determination of the bending strength of glass — Part 3: Test with specimen supported at two points (four point bending)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization

PREN 2746-1990 Aerospace Series Glass Fibre Reinforced Plastics Determination of Flexural Properties Three Point Bend Method (Issue P 1)
PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending (Edition P1)

Society of Automotive Engineers (SAE)

SAE J949-2009 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three Point Bending Test
SAE J949-2022 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three-Point Bending Test

KR-KS

KS M ISO 11093-6-2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS M ISO 11093-6-2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
KS M ISO 899-2-2016 Plastics－Determination of creep behavior－Part 2：Flexural creep by three-point loading
KS M ISO 11093-7-2020 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method

AT-ON

ONORM EN 63-1979 Glass reinforced plastics. Determination of flexural properties. Three point method.
ONORM ENV 658-5-1993 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of shear strength by short span bend test (three-point)

AGMA - American Gear Manufacturers Association

932-A05-2005 Rating the Pitting Resistance and Bending Strength of Hypoid Gears
93FTMS1-1993 Spur Gear Bending Strength Geometry Factors: A Comparison of AGMA and ISO Methods

American Gear Manufacturers Association

AGMA 932-A05-2005 Rating the Pitting Resistance and Bending Strength of Hypoid Gears

ES-UNE

UNE-EN 658-5:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points) (Endorsed by AENOR in February of 2003.)

AASHTO - American Association of State Highway and Transportation Officials

T 97-2017 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
T 97-2014 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)

The American Road & Transportation Builders Association

AASHTO T 97-2014 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)

European Association of Aerospace Industries

AECMA PREN 2746-1990 Aerospace Series Glass Fibre Reinforced Plastics Determination of Flexural Properties Three Point Bend Method Issue P 1

Malaysia Standards

MS 1473-1999 Method of test for measuring the dynamic mechanical properties of plastics using three point bending

TH-TISI

TIS 2246.2-2005 Plastics.determination of creep behaviour.part 2: flexural creep by three.point loading

(U.S.) Ford Automotive Standards

FORD FLTM BS 005-1-2000 FLEXURAL STRENGTH OF PAPER BOARD

Japanese Industrial Standards Committee (JISC)

JIS R 3111-3:2022 Glass in building -- Determination of the bending strength of glass -- Part 3: Test with specimen supported at two points (four-point bending)

Indonesia Standards

SNI ISO 16978:2010 Wood-based panels - Determination of modulus elasticity in bending and of bending strength

SE-SIS

SIS SS 81 26 82-1989 Reinforcement bars — Bending — Nominal radii and diameters of bending tools

PL-PKN

PN D04202-1977 Plywood Determination of waip and twist

Others: