molecular weight;

molecular weight;, Total:67 items.

The international standard classification for "molecular weight;" includes: Equipment for the chemical industry , Ropes , Man-made fibres , Fuels , Waxes, bituminous materials and other petroleum products , Rubber , Plastics pipes, fittings and valves , Protection against dangerous goods , Reinforced plastics , Thermoplastic materials , Plastics , Implants for surgery, prosthetics and orthotics , Physicochemical methods of analysis , Aromatic hydrocarbons , Aliphatic hydrocarbons , Photographic paper, films and cartridges , Drainage systems , Water supply systems , Installations in buildings .

The Chinese standard classification for "molecular weight;" includes: Non-metal chemical machinery equipment , Threads, straps and ropes , Chemical fibre , Chemical fibre in general , Lubricating oil , Fuel oil , Petroleum wax , Plastic profile , Marking, packaging, transport and storage in general , Fibre reinforced composites , Synthetic resin and plastic , Orthopedic devices , Basic standards and general methods for water treatment agent , General organic chemicals , Surface active agent , Basic standards and general methods for photosensitive material , Outdoor water supply and draining engineering , Building water supply and draining engineering .

Professional Standard - Commodity Inspection

SN/T 3002-2011 Determination of Relative Molecular Weight and Molecular Weight Distribution of Polyethylene. Gel Permeation Chromatography Method
SN/T 4183-2015 Determination of relative molecular weight and molecular weight distribution of polyolefins. High temperature gel permeation chromatography method
SN/T 2492-2010 Determination of molecular weight of liquefied petroleum gas—Gas chromatography

Professional Standard - Chemical Industry

HG/T 4744-2014 Determination of average molecular weight and molecular weight distribution of photographic gelatin by GFC
HG/T 3872-2006 Determination of molecular weight averages and molecular weight distribution of polystyrene standards by steric exclusion chromatography
HG/T 4375-2012 Modified material of ultra-high molecular weight polyethylene for pipe linging
HG/T 4787-2014 Middle molecular polyisobutylene

Professional Standard - Textile

FZ/T 63028-2015 Ultra-high molecular weight polyethylene netting twine
FZ/T 54027-2010 Ultra-high molecular weight polyethylene (UHMWPE) filament yarns
FZ/T 54056-2012 Ultra-high Molecular Weight Polyethylene(UHMWPE)/Nano-carbon Tube Filament Yarns
FZ/T 50025-2014 Test method for abrasion performance of UHMWPE filament yarns

Professional Standard - Petrochemical Industry

SH/T 0583-1994 Determination method for hydrocarbon relative molecular weight (thermoelectric measurement vapor pressure method)
SH/T 0398-2007 Standard test method for molecular weight of petroleum wax and petrolatum
SH/T 1759-2007 Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography
SH/T 0169-1992 Methods of measurement for the average molecular weight of mineral insulating oil (depression of freezing point)
SH/T 0108-1992 Determination of average molecular mass and molecular weight distribution of certain polymeric additive (volume exclusion chromatography)
SH/T 0398-1992 Petroleum Wax and Petroleum Fat Molecular Weight Determination
SH/T 0730-2004 Estimation of molecular weight (relative molecular mass) of petroleum oils from viscosity measurements

Henan Provincial Standard of the People's Republic of China

DB41/T 893-2014 UHMWPE sheet

Professional Standard - Light Industry

QB/T 2668.1-2017 Ultra-high-molecular-weight polyethylene (PE-UHMW) pipes
QB/T 2668-2004 Ultra-high-molecular-weight polyethylene (PE-UHMW) pipes

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 31816-2015 Water treatment chemicals―Determination of the molecular weight and molecular weight distribution of polymers―Gel filtration chromatography
GB/T 6598-1986 Determination of weight-average molecular weight of polystyrene standards by low angle laser light scattering method
GB 6598-1986 Determination of Weight Average Molecular Weight of Polystyrene Standard Samples by Small Angle Laser Light Scattering Method
GB/T 19701.1-2005 Implants for surgery - Ultra-high molecular weight polyethylene part 1:powder form
GB/T 5177.3-1985 Determination of mean relative molecular mass for industrial alkylbenzene--Gas-liquid chromatographic method
GB/T 29554-2013 Ultra high molecular weight polyethylene fibre
GB/T 12005.10-1992 for molecular weight of polyacrylamide by viscometry
GB/T 21864-2008 Standard test method for molecular weight averages and molecular weight distribution of polystyrene by high performance size-exclusion chromatography
GB/T 5178-1985 Determination of mean relative molecular mass for technical straight-chain sodium alkyl benzene sulphonates; Gas-liquid chromatographic method
GB/T 6599-1986 Determination of molecular weight averages and molecular weight distribution of polystyrene standards by steric exclusion chromatography
GB/T 30668-2014 Ultra high molecular weight polyethylene fibre 8-strand braided ropes,12-strand braided ropes and covered ropes
GB/T 13530.3-1992 Sodium ethoxylated alkyl sulfate--Determination of the mean relative molecular mass
GB/T 27843-2011 Chemicals - Determination of the low molecular weight content of a polymer using Gel permeation chromatography (GPC)
GB/T 19701.2-2005 Implants for surgery Ultra-high molecular weight polyethylene--Part 2:Moulded forms
GB/T 30787-2014 Binder Resin applied in digital printing materials―The determination average molecular weight and its distribution―Gel permeation chromatography
GB/T 17282-1998 Method for estimation of molecular weight (relative molecular mass) of petroleum oils from viscosity measurements

Professional Standard - Urban Construction

CJ/T 320-2009 Ultrahigh molecular weight polyethylene composite pipe
CJ/T 323-2015 Steel wire reinforced ultra-high molecular weight polyethylene composite pipe
CJ/T 427-2013 Ultra-high molecular weight polyethylene sheet composite pipe

农业农村部

SC/T 4046-2019 General technical requirement for ultra high molecular weightpolyethylene netting twine
NY/T 1860.36-2016 Guidelines on the determination of physic-chemical properties for pesticides. Part 36:Determination of low molecular weight content of polymers using gel permeation chromatography
NY/T 1860.35-2016 Guidelines on the determination of physico-chemical properties of pesticides. Part 35:Determination of the molecular weight and the molecular weight distribution of polymers using gel permeation chromatography
SC/T 5022-2017 Ultra-high molecular weight polyethylene netting-Warp knitting type
SC/T 4049-2019 Ultra-high molecular weight polyethylene netting- -Twisting type

Group Standards of the People's Republic of China

T/SHXCL 000002-2019 Waterborne nanoscale narrow-band polymerized acrylic resin
T/ZZB 1184-2019 Ultra high molecular weight polyethylene fiber rope for offshore lifting
T/CSCA 110049-2020 “Shanghai Brand”certification criteria: Ultra-high-molecular-weight polyethylene resin for spinning
T/ZZB 1957-2020 Low line density ultra-high molecular weight polyethylene filament yarns
T/CAMDI 076-2022 Gel chromatography method for molecular weight and distribution of polysulfone specialty for medical devices
T/SHXCL 0005-2020 Technical specification for green-design product evaluation— Ultra-high-molecular-weight polyethylene(PE-UHMW) resin
T/CAMDI 079-2022 Standard guide for extensively irradiation-crosslinked ultra-high molecular weight polyethylene fabricated form for surgical implant applications
T/FSI 052-2020 Method for Determination of Molecular Weight of Methyl Vinyl Silicone Rubber - Mooney Viscosity Method
T/SHXCL 0017-2022 Ultra-high-molecular-weight polyethylene (PE-UHMW) resin for joint replacements

Professional Standard - Aerospace

QJ 1870-1990 Epoxy resin molecular weight and its distribution test method (GPC method)

Taiwan Provincial Standard of the People's Republic of China

CNS 13382.25-1996 Implants for Surgery-Ultra-High Molecular Weight Polyethylene (Part 2:Moulded Form)
CNS 13382.24-1996 Implants for Surgery-Ultra-High Molecular Weight Polyethylene (Part 1:Powder form)
CNS 7915-1981 Average Molecular Weight of Fatty Quaternary Ammonium Chlorides
CNS 13382-24-1996 Implants for Surgery-Ultra-High Molecular Weight Polyethylene (Part 1:Powder form)
CNS 13382-25-1996 Implants for Surgery-Ultra-High Molecular Weight Polyethylene (Part 2:Moulded Form)

Professional Standard - Medicine

YY/T 0815-2010 Standard test method for measurement of enthalpy of fusion percent crystallinity and melting point of ultra-high-molecular weight polyethylene by means of differential scanning calorimetry
YY/T 0811-2010 Standard guide for extensively irradiation—Crosslinked ultrahigh molecular weight polyethylene fabricated forms for surgical implant applications
YY/T 0813-2010 Standard test method for in situ determination of network parameters of crosslinked ultra high molecular weight polyethylene(UHMWPE)

国家药监局

YY/T 0811-2021 Extensively irradiation-crosslinked ultra-high molecular weight polyethylene fabricated forms for surgical implant applications

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 40169-2021 Compression-moulded plates of ultra-high-molecular-weight polyethylene(PE-UHMW)and high density polyethylene (PE-HD)

Japanese Industrial Standards Committee (JISC)

JIS K 7252-1:2008 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 1: General principles
JIS K 7252-3:2008 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 3: Low-temperature method

Others: molecular weight,Molecular weight 500,Molecular weight classification,molecular weight molecular weight,molecular weight spectrum,Molecular weight 81,Molecular weight gpc,Oil Molecular Weight,Rubber molecular weight,molecular weight laser,Molecular weight sample,Substance molecular weight,ethanol molecular weight,Molecular weight,Molecular weight difference,molecular weight relative molecular weight,molecular weight molecular weight distribution,《Molecular weight,Molecular weight?