GB/T 10067.35-2015 in English

《GB/T 10067.35-2015电热装置基本技术条件 第35部分：中频真空感应熔炼炉》由TC121（全国工业电热设备标准化技术委员会）归口，主管部门为中国电器工业协会。
GB/T10067的本部分规定了中频真空感应熔炼炉(以下简称真空炉)的产品分类、技术要求、试验方法、检验规则、标志、包装、运输、贮存以及订购和供货。
本部分适用于工作频率高于工频50Hz,低于或等于10000Hz,额定容量在0.01t~30t范围内的,由中频半导体变频装置(以下简称变频装置)供电的,在真空状态下对特种合金钢、镍基高温合金、钛合金和铜及其合金等进行熔炼和铸锭或复杂零件精密铸造的感应炉。

Scope

This part of GB/T 10067 specifies the product classification, technical requirements, test methods, inspection rules, marking, packaging, transportation, storage, ordering and supply of intermediate frequency vacuum induction melting furnaces (hereinafter referred to as vacuum furnaces). This part applies to those whose operating frequency is 50 Hz higher than the power frequency, lower than or equal to 10 000 Hz, and whose rated capacity is in the range of 0.01 t to 30 t, powered by an intermediate frequency semiconductor frequency conversion device (hereinafter referred to as the frequency conversion device), in a vacuum state It is an induction furnace for melting special alloy steel, nickel-based high-temperature alloy, titanium alloy, copper and its alloy, casting ingot or precision casting of complex parts.