GB/T 10708.3-2000 in English

VALID

Reciprocating rubber seals; Design criteria for standard applications; Part 3 : Rubber seals for wipers

Issued on:2000-08-28
Implemented on:2001-03-01
File Format:PDF
Delivery:Via email within 1~3 business days

Price(USD)： $50.00
$49.00

Standard No:	GB/T 10708.3-2000
Document status:	VALID
Title in English:	Reciprocating rubber seals; Design criteria for standard applications; Part 3 : Rubber seals for wipers
Title in Chinese:	往复运动橡胶密封圈结构尺寸系列第3部分：橡胶防尘密封圈
Language:	English
File Format:	Electronic (PDF)
Delivery:	Via email within 1~3 business days
Issued on:	2000-08-28
Implemented on:	2001-03-01
ICS Classification:	83.140.50-Seals
Chinese Classification:	G43-Rubber seal
Professional Classification:	GB-National Standard
Related Keywords:	rubber dust seals rubber seals standard applications design criteria seals
Related Topics:	din sealing ring din sealing ring Flat Rubber Seals aem sealing ring Hardness of sealing rubber Normal phase sealing ring sealing ring Medical rubber series Rubber ring analysis Rubber ring machine Structural analysis often sealing ring test seal seal ring english sae sealing ring rubber phase structure Inflatable seal iso sealing ring standard size Conductive rubber series f rubber ring military rubber ring GB/T 10708.3 GB/T 10708.3-2000 Dust ring Reciprocating rubber seal material rubber sealed loop Hemp sealing ring Basic size of rubber seal ring Sealing ring and sealing groove match Matching of rubber ring and rubber ring groove Fluorine rubber sealing ring duplex hardness Fluorine rubber tower seal ring Medical grade silicone sealing ring Dust ring design Axial dynamic seal structure

This standard specifies the type, dimensions and tolerances of reciprocating rubber dust seals.
This standard is applicable to the rubber dust seals installed at the guide sleeve of hydraulic cylinder piston rod and used for dust prevention and sealing (hereinafter referred to as dust seal).

Foreword I
1 Scope
2 Normative References
3 Classification and Symbols
4 Requirements
5 Marking

Loading PDF document...

Error loading PDF. Please make sure the file is valid and try again.

We also recommend

GB/T 10708.1-2000 in English

Reciprocating rubber seals; Design criteria for standard applications; Part 1 : Rubber seals of act on single seal
2000-08-28
GB/T 21283.1-2007 in English

Rotary shaft lip-type seals incorporating thermoplastic sealing elements—Part 1:Nominal dimensions and tolerances
2007-12-13
GB/T 33154-2025 in English

Rubber seals for yaw and pitch bearings of wind turbine generator
2025-08-01
GB/T 33326-2016 in English

Rubber strips used in flat-plate solar collectors
2016-12-13
GB/T 27568-2011 in English

Rubber gasket for doors & windows in railway vehicles
2011-12-05
GB/T 36879-2018 in English

Rubber seals used for full face tunnel boring machine
2018-09-17
GB/T 21874-2008 in English

Elastomeric seals - Requirements for materials for pipe joint seals used in water and drainage applications - Thermoplastic elastomers
2008-05-14
GB/T 24795.1-2009 in English

Rotary shaft lip seals for commercial vehicle axle—Part 1:The configurations,dimensions and tolerances
2009-12-15