Sealing ring and sealing groove match

Sealing ring and sealing groove match, Total:275 items.

The international standard classification for "Sealing ring and sealing groove match" includes: Filters, seals and contamination of fluids , Seals, glands , Rivets , Components for aerospace construction , Seals , Bodies and body components , Seals for pipe and hose assemblies .

The Chinese standard classification for "Sealing ring and sealing groove match" includes: Pipe fittings, clamps and seals , Fasteners , Cold processing technology , Pipeline fittings , Hydraulic and pneumatic device , Sealing and sealing device , Vacuum technique and equipment , Rubber seal , Vehicle body (cab) and accessories , Rubber products in general , Synthetic rubber , Shafting equipment .

---

Professional Standard - Aviation

• HB 4-56-1976 Round section rubber ring sealing structure
• HB 4-58-1976 Circular section rubber ring sealing structure/protection ring
• HB 7520-1997 O-shaped Rubber Seal - Groove
• HB 5584-1981 rubber sealed loop
• HB 5585-1983 rubber sealed loop
• HB 956-2000 sealing ring
• HB/Z 4-1987 Design requirements for O-ring and sealing structure
• HB 6692-1993 Phosphate ester hydraulic oil resistant O-ring rubber seal groove
• HB 4-56-1987 Round section rubber ring sealing structure
• HB 1-504-1983 Threaded connection sealing washer?
• HB 953-2000 U-shaped sealing ring
• HB/Z 4-1995 Requirements for the Design of O-type Seal Ring and Seal Structure
• HB 5585-1981 rubber sealed loop
• HB/Z 223.5-1993 Aircraft Assembly Process - Sealing Riveting of Coating Sealant
• HB 5584-1983 rubber sealed loop
• HB 2575-1976 sealing ring
• HB 7466-1996 Flexible Graphite Seal Ring
• HB 4-58-1987 Protection Ring for Sealing Structure of Rubber Ring with Circular Cross-section

Professional Standard - Machinery

• JB/ZQ 4264-2006 Yx-shaped seal ring for holes
• JB/T 7757.2-2006 The rubber O - ring for mechanical seal
• JB/T 6656-1993 Installation Groove for Sealing Rings Intended to Be Used in Air Cylinders Type, Main Dimensions and Tolerance
• JB/T 8871-2002 Blank of hard alloy sealing ring for mechanical seal
• JB/T 6997-2007 Rubber coverd U shape seals
• JB/T 5278.3-1991 Copper Wire Seal Can Be Baked Vacuum Flange Copper Wire Sealing Ring Structure Size?
• JB/ZQ 4786-2006 J-shaped unreinforced rubber seal ring
• JB/ZQ 4265-2006 Yx-shaped Seal Ring for Axis
• JB/T 7757.2-1995 O-ring rubber for mechanical seal
• JB/ZQ 4245-2006 Labyrinth seal groove
• JB/ZQ 4224-2006 O-shaped rubber seal ring
• JB/T 1002-1977 Gasket
• JB/T 6994-1993 VD rubber sealing ring
• JB/T 6994-2007 VD shape rubber seal ring
• JB/T 6658-2007 Housing dimensions and tolerances of O-ring rubber seal applicable to pneumatic
• JB/T 6658-1993 Groove dimensions and tolerances of O-ring rubber seals for pneumatic applications
• JB/T 6376-1992 Groove dimensions and tolerances of rubber seal rings for pneumatic valves
• JB/T 12490-2015 O-ring sealed motorcycle chains
• JB/ZQ 4784-2006 Seal washer
• JB/T 982-1977 Combined Sealing Washer
• JB/T 11959-2014 Sealing Ring of Cemented Carbide for Mechanical Seal
• JB/T 1735-1991 Bottom valve disc sealing ring

Professional Standard - Aerospace

• QJ 1992.9-1990/XG 1-1996 Adhesive preparation and bonding process specification JN-3 silicone rubber sealing putty preparation and bonding (sealing) process
• QJ 312-1978 sealing ring
• QJ 1035.2-1986 Selection of O-shaped Rubber Sealing Ring and Design Specifications for Sealed Chamber
• QJ 1992.23-1990 Adhesive preparation and bonding process specification S-2 Polysulfide sealant preparation and sealing (bonding) process
• QJ 1992.20-1990 Adhesive preparation and bonding process specification XM-31-1 sealant preparation and bonding (sealing) process
• QJ 1992.20-1990/XG 1-1996 Adhesive preparation and bonding process specification XM-31-1 sealant preparation and bonding (sealing) process
• QJ 1992.9-1990 Adhesive preparation and bonding process specification JN-3 silicone rubber sealing putty preparation and bonding (sealing) process
• QJ 522-1983 Combination Type and Weight of Shear Resistant Sealing Ring Groove Rivet
• QJ 1992.23-1990/XG 1-1996 Adhesive preparation and bonding process specification S-2 Polysulfide sealant preparation and sealing (bonding) process
• QJ 2692-1994 L-shape Seals Made From Neoprene Compound
• QJ 1035.1-1986 O-shaped Rubber Sealing Ring

未注明发布机构

• DIN 18545 E:2021-07 Sealing of glazing with sealants - Requirements for rebates and glazing systems
• DIN 470 E:2008-10 Sealing washers
• SAE MA2303-2007 FITTING, UNION, BEAM SEAL, METRIC
• DIN 18545 E:2014-09 Sealing of glazing with sealants - Requirements for rebates and glazing systems

Professional Standard - Automobile

• QC/T 666.1-2010 Auto air-condiction (HFC-134) seal parts Part 1:rubber O-rings
• QC/T 638-2000 Gasket
• QC/T 666-2010 Seals for automotive air conditioners (HFC-134a) Part 1: O-ring rubber seals
• QC/T 638-2023 Sealing washer

Military Standard of the People's Republic of China-General Armament Department

• GJB 125.6.2A-1989 Double-ear seal traveling self-locking nut sealing ring
• GJB 125.6-1986 Double-ear seal traveling self-locking nut sealing ring
• GJB 125.6.1A-1989 Double-ear seal traveling self-locking nut sealing ring

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

• GB/T 10708.1-2000 Reciprocating rubber seals; Design criteria for standard applications; Part 1 : Rubber seals of act on single seal
• GB 29992-2013 Rubber Sealing Rings for Pressure Cooker
• GB 9878-1988 Material of rubber seals used for gas supply pipes and fittings
• GB/T 10708.2-2000 Reciprocating rubber seals; Design criteria for standard applications; Part 2:Rubber seals of act on double seal
• GB 9877.3-1988 Rotary shaft lip seals-Design criteria for standard applications-Part 3:Assembled rotary shaft lip seals
• GB/T 3452.3-2005 Housing dimensions for O - ring elastomer seals in hydraulic and pneumatic applications
• GB/T 10708.3-2000 Reciprocating rubber seals; Design criteria for standard applications; Part 3 : Rubber seals for wipers
• GB 7039-1986 Rubber compounds for sealing ring of reciprocating applications
• GB/T 9877.3-1988 Rotary shaft lip seals--Design criteria for standard applications--Part 3:Assembled rotary shaft lip seals
• GB/T 16593-1996 Rotary shaft lip type seals-Vocabulary
• GB/T 23658-2009 Elastomeric seals - Material requirement for seals used in pipes and fittings carrying gaseous fuels and hydricarbon fluid

机械电子工业部

• JB 1735-1991 Bottom valve disc seal

工业和信息化部

• HG/T 5839-2021 Gas spring seal ring
• WJ/T 1470-2014 Clamp base and its parts and components sealing rings

Professional Standard - Chemical Industry

• HG/T 3092-1988(1997) Material of rubber seals used for gas supply pipes and fittings
• HG/T 3092-1988 Material of rubber seals used for gas supply pipes and fittings
• HG/T 3653-1999 Oval cross section and plastic Sealing washer
• HG/T 5837～5839-2021 Rubber sealing valves for engine electronic thermostats, metal skeleton foam rubber composite sealing plates and sealing rings for gas springs (2021)
• HG/T 3980-2007 Sealing rings of automobile bearing

Professional Standard - Military and Civilian Products

• WJ 1951-1990 Piping System Gaskets
• WJ 2664-2005 Specifications for military high-performance rubber-plastic composite seal rings
• WJ 1470-1985 Clamp seat and its parts and components sealing ring

Group Standards of the People's Republic of China

• T/ZBSQN 003-2023 Sealing gaskets for alkaline electrolytic cells
• T/SXJP 072-2023 Water medium hydraulic support sealing ring
• T/CAAMTB 102-2022 Special sealing rings for methanol vehicles
• T/ZBSQN 003-2024 Sealing gasket for alkaline electrolytic cell
• T/TCMCA 0029-2024 New seal toothed chain

Professional Standard - Electron

• SJ/T 10161.7-1991 Vacuum rubber seal plane flanges - Dimensions of O rubber sealing rings

Professional Standard - Ferrous Metallurgy

• YB/T 4059-2007 High Temperature Cladding Metal O-ring
• YB/T 4059-1991 Metal clad high temperature seal ring

冶金工业部

• YB 4059-1991 Metal covered high temperature sealing ring

Professional Standard-Ships

• CB 1236-1995 Specification of O-shaped Rubber Sealing Ring and Design Method of Seal Structure for Torpedo

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

• GB/T 29992-2017 Rubber sealing rings for pressure cooker
• GB/T 29992-2013 Rubber sealing rings for pressure cooker

Professional Standard - Traffic

• JT/T 342.2-1995 Vessels rudder axles and sealing arrangement

Japanese Industrial Standards Committee (JISC)

• JIS B 2406:1991 O-rings housings -- Design criteria
• JIS B 2401-4:2012 O-rings -- Part 4: Anti-extrusion rings (back-up rings)
• JIS B 2401-1:2012 O-rings -- Part 1: O-rings
• JIS B 2401:1999 O-rings
• JIS B 2401:1991 O-rings
• JIS B 2407:1995 Back-up rings for O-rings
• JIS B 2401 ERRATUM 1:2001 O-rings (Erratum 1)
• JIS A 5757:1995 Sealing compounds for sealing, glazing and caulking in buildings

CZ-CSN

• CSN 02 3655-1974 Seals for housings. Felt seal and groove
• CSN 37 0189-1985 Sealing washers for electrical cablcs
• CSN ON 02 9310-1963 Seals for exhaust
• CSN 02 9269-1981 Sealing groove form cups. Type 112 49
• CSN 10 7255-1975 Vacuum technology. Rubber gasket rings

British Standards Institution (BSI)

• BS ISO 3601-4:2008 Fluid power systems - O-rings - Anti-extrusion rings (back-up rings)
• BS EN 3631:2009 Aerospace series. Fluid fittings, flanged, 90° elbowed. Sealing by O-ring for 0,8 mm thick tubes
• BS EN 3631:2014 Aerospace series. Fluid fittings, flanged, 90 elbowed. Sealing by O-ring for 0,8 mm thick tubes

German Institute for Standardization

• DIN 7603:2001-05 Sealing rings
• DIN 470:2011-03 Sealing washers
• DIN 470:2011 Sealing washers
• DIN 470:1974 Sealing Washers
• DIN 18545:2015 Sealing of glazing with sealants - Requirements for rebates and glazing systems
• DIN 87155:2015 Grey cast-iron coarse filters - Sealing rings
• DIN 87155:1954 Grey cast-iron coarse filters; sealing rings
• DIN EN 15434-1:2021 Bonding sealants - Part 1: Bonded glazing sealants; German and English version prEN 15434-1:2021
• DIN ISO 7425-1:1990 Hydraulic fluid power; housings for elastomer-energized, plastic-faced seals; dimensions and tolerances; piston seal housings; identical with ISO 7425-1:1988
• DIN EN 3631:2008 Aerospace series - Fluid fittings, flanged, 90° elbowed - Sealing by O-ring for 0,8 mm thick tubes; German and English version EN 3631:2008

Defense Logistics Agency

• DLA AN996 REV 2-1974 RING - LOCK
• DLA AN996 REV 2 (1)-2002 RING - LOCK

Society of Automotive Engineers (SAE)

• SAE ARP674C-2001 (R) Groove Design, Metal O-Ring Gasket
• SAE AS3387-1-1951 AS3387 Sealing Ring
• SAE AS3393-1-1951 AS3393 Sealing Ring
• SAE AS3381-1-1951 AS3381 Sealing Ring
• SAE RS-734-1-1979 RS734 Groove Dimensions for Gaskets (Metallic Seals)
• SAE J281A-1977 SEALING RINGS–CAST IRON
• SAE J281-1992 Cast Iron Sealing Rings
• SAE AS3112-1-1948 AS3112 Sealing Washer
• SAE AS63850-2-2003 AS63850-864 Sealing Ring
• SAE AS2516-3-2015 AS2516 Sealing Washer
• SAE AS2598-5-1946 AS2598 Filler Sealing Ring
• SAE AS5364-6-2015 AS5364 Filler Sealing Ring
• SAE AS3085-1974 Packing, Preformed - AMS 7280,'O' Ring
• SAE AGS3820-1-1968 AGS3820-869 Washer, Seal, Flat
• SAE J1236-1993 CAST IRON SEALING RINGS (METRIC)
• SAE AMS7320-1940 SEALING RINGS Bronze Castings
• SAE J1236-2015 Cast Iron Sealing Rings (Metric)
• SAE AMS7322-1940 SEALING RINGS Bronze Castings
• SAE MA2303-2015 FITTING, UNION, BEAM SEAL, METRIC
• SAE HS-1417-1983 Fluid Sealing Handbook- Radial Lip Seals May 1983
• SAE AMS-HH-G-101A-2014 Gasket, Metallic-Encased
• SAE AMS-HH-G-101-2000 Gasket, Metallic-Encased
• SAE AS4309B-2007 Nipple - Flared Tube to Pipe Thread, for Seal Ring
• SAE ARP674-1964 METAL RING SEAL GROOVE DESIGN
• SAE AMS7270C-1956 RINGS, SEALING, SYNTHETIC RUBBER Fuel Resistant (65-75)
• SAE AMS7270A-1952 RINGS, SEALING, SYNTHETIC RUBBER Fuel Resistant (65-75)
• SAE AMS7270B-1954 RINGS, SEALING, SYNTHETIC RUBBER Fuel Resistant (65-75)
• SAE AMS7322B-1962 SEALING RINGS, CAST BRONZE 80Cu - 19Sn
• SAE AS5018-2015 WASHER, FLAT, BEAM SEAL FITTING
• SAE AS4716A-2005 (R) Gland Design, O-ring and Other Elastomeric Seals
• SAE AMS7322A-1951 SEALING RINGS, CAST BRONZE 80Cu - 19Sn
• SAE MA3434-1987 Packing, Preformed - O-Ring Seal, AMS 7273, Metric
• SAE ARP1832-2003 Color Identification for O-ring Seals
• SAE J2310-1999 Rectangular Cross Section Polymeric Sealing Rings (Metric)
• SAE AIR1108-2013 Groove Design - Metal Face Seal
• SAE AIR1707B-2014 Patterns of O-ring Failures
• SAE AIR1707A-2003 Patterns of O-ring Failures
• SAE AS5018-1995 Washer, Flat, Beam Seal Fitting
• SAE MA2305-2015 FITTING, UNION, BULKHEAD, BEAM SEAL, METRIC
• SAE AIR1108A-2019 Groove Design - Metal Face Seal
• SAE AS407-5-1940 AS407 Sealing Ring. Fuel. Drain Valve
• SAE ARP3050-2007 Suitable Test Sizes for O-ring Specifications
• SAE ARP1832-1985 Color Identification for O-Ring Seals
• SAE AS1367-2011 CROSS-FLARED TUBE WITH SEAL RING
• SAE AS3578-2018 PACKING, PREFORMED – O-RING SEAL AMS7271
• SAE AS3581-2018 PACKING, PREFORMED – O-RING SEAL AMS7259
• SAE AS3570-2018 PACKING, PREFORMED – O-RING SEAL AMS7274
• SAE AS1097B-2014 SEAL RING, 37° FLARED TUBE FITTING END
• SAE AS1368B-2006 FITTING, REDUCER-EXTERNAL THREAD FLARED TUBE FOR SEAL RING FSC 4730
• SAE ARP1832A-2011 Color Identification for O-Ring Seals
• SAE AS3551-2018 PACKING, PREFORMED – O-RING SEAL AMS7272
• SAE AMS7320A-1951 SEALING RINGS, CAST LEADED BRONZE 79Cu - 16Sn - 5Pb

RO-ASRO

• STAS 7319-1971 Seals for muchiile building HOUSINGS FOR O RINGS
• STAS 7513/4-1974 Agglomerated cork boards for gaskets BOARDS FOR PROTECTION GASKETS TYPE B
• STAS 4218-1977 FELT FOR GASKETS
• STAS 7320/3-1983 Scals for machine building HOUSING FOR O RINGS Dimcnsions
• STAS 5891-1988 METALLIC SEAL IN G CAPS

Association Francaise de Normalisation

• NF E29-584:1979 Sealing washers.
• NF R99-001:1943 Radial friction sealing rings.
• NF R93-920:1993 Raod vehicles. Circular sealing rings.
• NF L43-231*NF EN 3631:2014 Aerospace series - Fluid fittings, flanged, 90o elbowed - Sealing by O-ring for 0,8 mm thick tubes

IT-UNI

• UNI 2211-1954 Gaskets for bulkhead seal channels
• UNI 6899-1971 Pump mechanical seal device groove. There are wire braided gaskets. Interchangeable

International Organization for Standardization (ISO)

• ISO 3601-4:2008 Fluid power systems - O-rings - Part 4: Anti-extrusion rings (back-up rings)
• ISO 6448:1985 Rubber seals; Joint rings used for petroleum product supply pipes and fittings; Specification for material
• ISO 4633:2015 Rubber seals - Joint rings for water supply, drainage and sewerage pipelines - Specification for materials
• ISO 4633:2002 Rubber seals - Joint rings for water supply, drainage and sewerage pipelines - Specification for materials

U.S. Military Regulations and Norms

• ARMY MIL-HDBK-692 B-1983 GUIDE TO THE SELECTION OF RUBBER O-RINGS
• ARMY MIL-O-70548 REINST NOTICE 2-1997 OBTURATING BAND, PLASTIC SPLIT (MOLDED)
• ARMY MIL-O-70548 NOTICE 3-2009 OBURATING BAND, PLASTIC SPLIT (MOLDED)
• ARMY MIL-O-70548-1986 OBTURATING BAND, PLASTIC SPLIT (MOLDED)
• ARMY MIL-O-71152 REINST NOTICE 2-1996 OBTURATING RING, PLASTIC SPLIT (MOLDED)
• ARMY A-A-52524/17 A VALID NOTICE 1-2008 Seal, Plain or Seal, Plain Encased: Single Sealing Member, Extended Case
• ARMY MIL-O-70548 (6)-1997 OBTURATING BAND, PLASTIC SPLIT (MOLDED)
• ARMY MIL-O-71152-1993 OBTURATING RING, PLASTIC SPLIT (MOLDED)
• ARMY MIL-O-71130-1992 OBTURATING BAND, PLASTIC SPLIT (MOLDED)

Korean Agency for Technology and Standards (KATS)

• KS K 9323-2008 Double flange rings(Reversible type)
• KS K 9323-1983 Double flange rings(Reversible type)
• KS M ISO 6448:2009 Rubber seals－Joint rings used for petroleum product supply pipes and fittings－Specification for material
• KS W ISO 1749-2009(2014) Aircraft－Elastomeric sealing rings－Packaging and identification
• KS K 9322-2000 Porous sintered metal single flange rings
• KS K 9322-1985 Porous sintered metal single flange rings
• KS B 2822-2007 Grooved type rubber-seated butterfly valves
• KS V 0712-2012 Shipbuilding-Non-asbestos gaskets to cargo piping system-Application standard
• KS M ISO 6447:2009 Rubber seals－Joint rings used for gas supply pipes and fittings－Specification for material

NO-SN

• NS 171-1968 Sealing constructions for flanges - NP 10 - 100 - Sealing: Tongue and groove
• NS 173-1968 Sealing constructions for flanges - NP 10 - 100 - Sealing: O-ring
• NS 186-1968 Sealings for flanges with tongue and groove

SCC

• NS 171:1968 Sealing constructions for flanges — NP 10 — 100 — Sealing: Tongue and groove
• ASTM STP 1254-92 Science and Technology of Building Seals and Sealant
• NS 173:1968 Sealing constructions for flanges — NP 10 — 100 — Sealing: O-ring
• DIN 470 E:2008 Draft Document - Sealing washers
• NS 186:1968 Sealings for flanges with tongue and groove
• BS 1806:1962 Specification for dimensions of toroidal sealing rings ('O' seals and their housings)
• HOLDEN HN 2419-2003 FKM ELASTOMER, O-RING SEAL
• BS 542:1964 Cable glands and sealing boxes for association with apparatus for use at mines
• ASTM STP 1200-92 Science and Technology of Building Seals, Sealants, Glazing, and Waterproofing
• ASTM STP 1168-92 Science and Technology of Building Seals, Sealants, Glazing and Waterproofing
• BS 1806:1951 Specification for dimensions of toroidal sealing rings ('O' seals and their recommended housings)
• ASTM STP 1243-95 Science and Technology of Building Seals, Sealants, Glazing, and Waterproofing
• HOLDEN HN 1584-2013 Sealant - Anaerobic with Teflon
• BS 6121-2:1989 Mechanical cable glands-Specification for polymeric glands
• AENOR UNE 81207:1977 FACIAL ADAPTERS. HERMETICITY WITH THE USER'S FACE

RU-GOST R

• GOST 24191-1980 Packing hoop. Design
• GOST R 52525-2006 Sealing devices. Composition and requirements for sealing systems

SAE - SAE International

• SAE J281-1980 CAST IRON SEALING RINGS
• SAE MA2303-1996 FITTING@ UNION@ BEAM SEAL@ METRIC
• SAE MA3434A-2019 Packing, Preformed - O-Ring Seal, AMS 7273, Metric
• SAE AS4211A-1996 FITTING@ CROSS@ BEAM SEAL
• SAE AS4211E-2018 FITTING@ CROSS@ BEAM SEAL
• SAE AS4211D-2007 FITTING@ CROSS@ BEAM SEAL
• SAE AS4211B-2006 FITTING@ CROSS@ BEAM SEAL
• SAE AS1097B-1994 SEAL RING@ 37° FLARED TUBE FITTING END

American Society for Testing and Materials (ASTM)

• ASTM F112-00(2013) Standard Test Method for Sealability of Enveloped Gaskets
• ASTM F112-00e1 Standard Test Method for Sealability of Enveloped Gaskets
• ASTM F112-00(2019) Standard Test Method for Sealability of Enveloped Gaskets
• ASTM F112-00(2006) Standard Test Method for Sealability of Enveloped Gaskets
• ASTM C1249-93(2000) Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications
• ASTM C1249-06 Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications

Aeronautical Radio Inc.

• ARINC 654 ITEM 8.0 Environmental Sealing Gaskets

Underwriters Laboratories (UL)

• UL 157-2015 UL Standard for Safety Gaskets and Seals
• UL 157-1996 UL Standard for Safety Gaskets and Seals Second Edition; Reprint with Revisions Through and Including March 12, 2007

GM North America

• GM GM9895P-2003 Compatibility with Mating Weatherstrips
• GM221M-2002 Grommets Underhood Revision A
• GM GM9909P-2004 Seals Abrasion Resistance
• GM 9985246-1983 Sealing Compound Thread and Gasket, No. 3 (Low Visc)
• GM 9980664-1974 Sealer - Adhesive
• GM 9981909-2015 Adhesive, Hot Melt, Weatherstrip, Sealer (Issue 9)
• GM 9985212-1980 Sealing Compound, Thread & Gasket, No. 3

European Committee for Standardization (CEN)

• EN 14188-4:2009 Joint fillers and sealants - Part 4: Specifications for primers to be used with joint sealants

United States Navy

• NAVY MIL-G-21569 B VALID NOTICE 1-1989 GASKETS, CYLINDER LINER SEAL, SYNTHETIC RUBBER
• NAVY MIL-G-21569 B-1965 GASKETS, CYLINDER LINER SEAL, SYNTHETIC RUBBER
• NAVY MIL-P-17553 A-1976 PACKING, PREFORMED, O-RING, SYNTHETIC RUBBER
• NAVY MIL-PRF-17927 D-2004 GASKETS, FLAME RESISTANT HINGED CLOSURE

CU-NC

• NC 90-19-1971 Manometer accessories Sealing washers Lens-shaped packing rings

GOSTR

• GOST R 52525-2019 Sealing devices. Composition and requirements for sealing systems

(U.S.) Ford Automotive Standards

• FORD ESW-M4G153-A-1988 SEALER, RUBBER BASE-FOR RADIAL OIL SEALS
• FORD WSS-M9P10-B-2015 GLASS RUN WEATHER-STRIP, BELT LINE (INNER/OUTER) WEATHERSTRIPS, SUN ROOF SEALS, AND STATIC FIXED GLASS WEATHERSTRIP PERFORMANCE SPECIFICATION ***TO BE USED WITH FORD WSS-M99P1111-A***

AIA/NAS - Aerospace Industries Association of America Inc.

• NAS1598-1997 Washer - Sealing (Rev 3)
• NAS1598-1977 Washer - Sealing (Rev 2)

BR-ABNT

• ABNT P-PB-80-1968 Gasket, cast iron seal pipe

AT-ON

• ONORM B 3723-1999 Sealing of glazings with sealants - Sealants - Requirements and testing - Marking of conformity
• OENORM EN 15434-1-2021 Bonding sealants - Part 1: Bonded glazing sealants

Aerospace Industries Association

• AIA NAS 1598-1997 (Inactive)Washer - Sealing Rev. 3

YU-JUS

• JUS G.C2.202-1990 Rubber sealings - "(T-rings for tube mills for net grinding. Shape and dimensions
• JUS G.C2.201-1990 Rubber sealings for tube mills for net grluding. Sbape and dimensions

ZA-SANS

• SANS 4633:2008 Rubber seals - Joint rings for water supply, drainage and sewerage pipelines - Specification for materials

IN-BIS

• IS 3175-1974 Specification for gaskets for pipe joints

PL-PKN

• PN BN 2211-02-1962 Cylindrical equipment edge seals
• PN M73100-1966 Seal rings U and V form Specifica?ions

Others: