Inflatable seal

Inflatable seal, Total:372 items.

The international standard classification for "Inflatable seal" includes: Components for aerospace construction , Filters, seals and contamination of fluids , Seals, glands , Rolling bearings , Seals , Seals for pipe and hose assemblies , Mechanical engineering drawings , Reaction vessels and their components .

The Chinese standard classification for "Inflatable seal" includes: Pipe fittings, clamps and seals , Fasteners , Measuring devices , Sealing and sealing device , Hydraulic and pneumatic device , Pipeline fittings , Vacuum technique and equipment , Rolling bearing , Rubber seal , Rubber products in general , Synthetic rubber , Basic standards and general methods , Chemical machinery and equipment parts , Microwave communication equipment , Electrochemical power source .

工业和信息化部

JB/T 7757-2020 The rubber O-ring for mechanical seal
JB/T 1092-2018 Vacuum technology-O-vacuum rubber ring gasket-Type and dimension
JB/T 1090-2018 Vacuum technology-J-vacuum rubber ring gasket-Type and dimension
HG/T 5839-2021 Gas spring seal ring
HG/T 2069-2022 Lean-type pig meat grading
HG/T 2100-2020 Specifications for plasma sprayed chromium oxide coated seal rings for mechanical seals
WJ/T 1470-2014 Clamp base and its parts and components sealing rings
HG/T 6050-2022 Rapid gas decompression resistance rubber sealing parts for pipeline valve

Professional Standard - Aviation

HB 956-2000 sealing ring
HB 7518-1997 Dimensional tolerance of O-ring rubber seal
HB 5585-1983 rubber sealed loop
HB 5584-1983 rubber sealed loop
HB 7514-1997 Dimensional tolerance of O-ring rubber seal
HB 7467-1996 Technical Specification for Flexible Graphite Seal Ring
HB 7517-1997 Dimensional tolerance of O-ring rubber seal
HB 7510-1997 Dimensional tolerance of O-ring rubber seal
HB 7511-1997 Dimensional tolerance of O-ring rubber seal
HB 4-56-1976 Round section rubber ring sealing structure
HB 7521-1997 Acceptance Specification for O-shaped Rubber Seal
HB 7515-1997 Dimensional tolerance of O-ring rubber seal
HB 4-56-1987 Round section rubber ring sealing structure
HB 7466-1996 Flexible Graphite Seal Ring
HB 953-2000 U-shaped sealing ring
HB 5584-1981 rubber sealed loop
HB 4-58-1976 Circular section rubber ring sealing structure/protection ring
HB 4-58-1987 Protection Ring for Sealing Structure of Rubber Ring with Circular Cross-section
HB 7509-1997 Dimensional tolerance of O-ring rubber seal
HB/Z 4-1995 Requirements for the Design of O-type Seal Ring and Seal Structure
HB 6691-1993 Phosphate Ester Resistant Hydraulic Oil O-Ring Rubber Seal Ring
HB 7520-1997 O-shaped Rubber Seal - Groove
HB 7519-1997 Dimensional tolerance of O-ring rubber seal
HB 1-504-1983 Threaded connection sealing washer?
HB 6813.8-1993 Parts for Pneumatic Micrometer - Rubber Seal (d=8.1~12.1)
HB 4-57-1987 Round section rubber ring sealing structure
HB 7513-1997 Dimensional tolerance of O-ring rubber seal
HB/Z 4-1987 Design requirements for O-ring and sealing structure
HB 2575-1976 sealing ring
HB 7512-1997 Dimensional tolerance of O-ring rubber seal
HB 7516-1997 Dimensional tolerance of O-ring rubber seal
HB 5585-1981 rubber sealed loop

Professional Standard - Aerospace

QJ 1035.1-1986 O-shaped Rubber Sealing Ring
QJ 312-1978 sealing ring
QJ 1035.2-1986 Selection of O-shaped Rubber Sealing Ring and Design Specifications for Sealed Chamber

Professional Standard - Machinery

JB/T 6997-1993 U-shaped inner skeleton rubber seal ring
JB/ZQ 4786-2006 J-shaped unreinforced rubber seal ring
JB/T 12490-2015 O-ring sealed motorcycle chains
JB/T 6376-1992 Groove dimensions and tolerances of rubber seal rings for pneumatic valves
JB/T 6656-1993 Installation Groove for Sealing Rings Intended to Be Used in Air Cylinders Type, Main Dimensions and Tolerance
JB/T 14581-2024 Spring energized seal for valve
JB/ZQ 4224-2006 O-shaped rubber seal ring
JB/ZQ 4264-2006 Yx-shaped seal ring for holes
JB/T 1737-1991 Swing check valve disc seal ring pressure plate
JB/T 1002-1977 Gasket
JB/T 6659-1993 Dimensional series and tolerances of O-ring rubber seals for pneumatics
JB/T 6639-2004 Rolling bearing parts—Skeleton acrylonitrile-buta-diene copolymers seal-Specifications
JB/T 6375-1992 Dimension series and tolerances of rubber sealing rings for pneumatic valves
JB/T 6657-1993 Dimension and Tolerance for Sealing Rings Intended to Be Used in Air Cylinders
JB/T 1736-1991 Swing check valve disc sealing ring
JB/ZQ 4265-2006 Yx-shaped Seal Ring for Axis
JB/T 6658-2007 Housing dimensions and tolerances of O-ring rubber seal applicable to pneumatic
JB/T 1091-1991 Type and Size of Vacuum Rubber JO/Skeleton-sealing Ring
JB/T 6659-2007 Dimensions series and tolerances of O-ring rubber seal applicable to pneumatic
JB/T 6658-1993 Groove dimensions and tolerances of O-ring rubber seals for pneumatic applications
JB/ZQ 4784-2006 Seal washer
JB/T 6994-2007 VD shape rubber seal ring
JB/T 1090-1991 0
JB/T 1092-1991 Type and Size of Vacuum Rubber O-sealing Ring
JB/T 5227.4-1991 Gas Chromatograph Pipeline Accessories Sealing Gaskets
JB/T 6994-1993 VD rubber sealing ring
JB/T 6997-2007 Rubber coverd U shape seals
JB/T 6639-2015 Rolling bearing parts—Skeleton acrylonitrile-buta-diene copolymers seal-Specifications
JB/T 982-1977 Combined Sealing Washer
JB/T 1735-1991 Bottom valve disc sealing ring
JB/T 7757.2-2006 The rubber O - ring for mechanical seal
JB/T 7757.2-1995 O-ring rubber for mechanical seal
JB/T 5278.3-1991 Copper Wire Seal Can Be Baked Vacuum Flange Copper Wire Sealing Ring Structure Size?

机械电子工业部

JB 5227.4-1991 Gas chromatograph pipe accessories sealing gasket
JB 1736-1991 Swing check valve disc seal ring
JB 1092-1991 O-type vacuum rubber sealing ring type and size
JB 1735-1991 Bottom valve disc seal
JB 1737-1991 Swing check valve disc seal ring pressure plate

Group Standards of the People's Republic of China

T/CSTM 00540-2022 Inflatable rubber seals for nuclear power sluice gates
T/CEEIA 712-2023 Durability evaluation of sealing apron for oil-immersed equipment in humid and hot environment
T/TCMCA 0029-2024 New seal toothed chain
T/WZBF 061-2024 Inflatable sealed flat gate valve
T/CEEIA 711-2023 Durability evaluation of sealing rings for gas insulated equipment in humid and hot environment
T/WZBF 006-2022 Electric flat gate valve (electric isolation door)
T/CAAMTB 102-2022 Special sealing rings for methanol vehicles
T/SXJP 072-2023 Water medium hydraulic support sealing ring

Professional Standard - Automobile

QC/T 638-2023 Sealing washer
QC/T 638-2000 Gasket

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 4459.6-1996 Mechanical drawings--Representation of seals for dynamic application
GB/T 10708.3-2000 Reciprocating rubber seals; Design criteria for standard applications; Part 3 : Rubber seals for wipers
GB/T 3762-1983 Bite type tube fittings; Tipping washer
GB/T 19228.3-2003 O - Rings for stainless steel press-fittings
GB 9878-1988 Material of rubber seals used for gas supply pipes and fittings
GB/T 3452.3-2005 Housing dimensions for O - ring elastomer seals in hydraulic and pneumatic applications
GB 3452.1-1992 Fluid systems--Sealing devices--O-rings--Insid diameters,cross-sections,tolerances and size identificaton code
GB/T 10708.2-2000 Reciprocating rubber seals; Design criteria for standard applications; Part 2:Rubber seals of act on double seal
GB/T 10708.1-2000 Reciprocating rubber seals; Design criteria for standard applications; Part 1 : Rubber seals of act on single seal
GB 4846-1984 Rubber sealing ring for pressure cooker
GB/T 5720-2008 Test methods for rubber O-rings
GB 9877.3-1988 Rotary shaft lip seals-Design criteria for standard applications-Part 3:Assembled rotary shaft lip seals
GB/T 23658-2009 Elastomeric seals - Material requirement for seals used in pipes and fittings carrying gaseous fuels and hydricarbon fluid
GB 29992-2013 Rubber Sealing Rings for Pressure Cooker
GB/T 9877.3-1988 Rotary shaft lip seals--Design criteria for standard applications--Part 3:Assembled rotary shaft lip seals
GB 7039-1986 Rubber compounds for sealing ring of reciprocating applications
GB 7040-1986 Rubber compounds for rotary shaft lip seals
GB/T 5720-1993 Test methods for rubber O rings
GB/T 16593-1996 Rotary shaft lip type seals-Vocabulary

Military Standard of the People's Republic of China-General Armament Department

GJB 125.6.1A-1989 Double-ear seal traveling self-locking nut sealing ring
GJB 125.6-1986 Double-ear seal traveling self-locking nut sealing ring
GJB 1325B-2020 Specification for inflatable sealing hoses for aircraft cockpits
GJB 1325A-1998 Specification for inflatable sealing hoses for aircraft cockpits
GJB 1325-1991 Specification for inflatable sealing hoses for aircraft cockpits
GJB 125.6.2A-1989 Double-ear seal traveling self-locking nut sealing ring

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 37210-2018 Nuclear radiation-resistant inflatable and water-filled rubber sealing products

Professional Standard - Military and Civilian Products

WJ 1470-1985 Clamp seat and its parts and components sealing ring
WJ/Z 89-1977 Pneumatic fixture parts (pneumatic part) L-shaped sealing ring rotary cylinder D=50~360 C=35;45
WJ/Z 96-1977 Pneumatic fixture parts (pneumatic part) O-ring sealing ear seat type fixed cylinder D=50~150
WJ/Z 98-1977 Pneumatic fixture parts (pneumatic part) O-ring seal swing fixed cylinder D=50~150
WJ 1951-1990 Piping System Gaskets
WJ/Z 90-1977 Pneumatic fixture parts (pneumatic part) O-ring rotary cylinder D=50~360 C=35;45
WJ/Z 100-1977 Pneumatic fixture parts (pneumatic part) O-shaped sealing ring end face fixed cylinder D=50~250
WJ/Z 97-1977 Pneumatic fixture parts (pneumatic part) L-shaped sealing ring swing fixed cylinder D=50~150
WJ/Z 95-1977 Pneumatic fixture parts (pneumatic part) L-shaped sealing ring ear seat type fixed cylinder D=50~150
WJ/Z 82-1977 Pneumatic fixture parts (pneumatic part) L-shaped sealing ring D=50~360
WJ/Z 99-1977 Pneumatic fixture parts (pneumatic part) L-shaped sealing ring end face fixed cylinder D=50~250

Professional Standard - Chemical Industry

HG/T 2810-1996 Reciprocating motion seal ring rubber material
HG/T 3092-1988 Material of rubber seals used for gas supply pipes and fittings
HG/T 2943-1984 Rubber sealing ring for Pressure cooker
HG/T 3612-1999 Rubber seals used for automobile hydraulic disc brake cylinders
HG/T 3653-1999 Oval cross section and plastic Sealing washer
HG/T 3092-1988(1997) Material of rubber seals used for gas supply pipes and fittings
HG/T 5837～5839-2021 Rubber sealing valves for engine electronic thermostats, metal skeleton foam rubber composite sealing plates and sealing rings for gas springs (2021)
HG/T 3980-2007 Sealing rings of automobile bearing
HG/T 2100-2003 Liquid piston chlorine compressor mechanical seals
HG/T 2810-2008 Compounds of reciprocating rubber seals
HG/T 2943-1984(1997) Rubber sealing ring for Pressure cooker

Professional Standard - Electron

SJ/T 10161.7-1991 Vacuum rubber seal plane flanges - Dimensions of O rubber sealing rings
SJ 1771-1981 Metallic bell cover for vacuum equipment--Sealing collar
SJ/T 10286-1997 Sealed nickel-cadmium button rechargeable single cells

Professional Standard - Tobacco

YC/T 140-1998 Cigarette - Determination of package seal - Charge method

Professional Standard - Post and Telecommunication

YD/T 559-1992 Sealing Test for Pressarized Waveguide Componet and Assemblies

Professional Standard - Ferrous Metallurgy

YB/T 4059-2007 High Temperature Cladding Metal O-ring
YB/T 4059-1991 Metal clad high temperature seal ring

冶金工业部

YB 4059-1991 Metal covered high temperature sealing ring

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 29992-2017 Rubber sealing rings for pressure cooker
GB/T 29992-2013 Rubber sealing rings for pressure cooker

工业和信息化部/国家能源局

JB/T 12490-2014 "O" type seal motorcycle chain

Professional Standard - Light Industry

QB/T 2459.3-1999 LR6/LR03 Alkaline Manganese-Zinc Cells Seal

Professional Standard - Nuclear Industry

EJ 24-1975 Latex gloves fastening sealing rubber ring

CZ-CSN

CSN ON 02 9310-1963 Seals for exhaust
CSN 37 0189-1985 Sealing washers for electrical cablcs
CSN IEC 622:1994 Sealed nickel-cadmium prismatic rechargeable single cells
CSN 10 7255-1975 Vacuum technology. Rubber gasket rings

Society of Automotive Engineers (SAE)

SAE AIR1707B-2014 Patterns of O-ring Failures
SAE AIR1707A-2003 Patterns of O-ring Failures
SAE AS1369-2011 PLUG-FLARED TUBE WITH SEAL RING
SAE AS4309B-2007 Nipple - Flared Tube to Pipe Thread, for Seal Ring
SAE AS3381-1-1951 AS3381 Sealing Ring
SAE AS3387-1-1951 AS3387 Sealing Ring
SAE AS3393-1-1951 AS3393 Sealing Ring
SAE J281A-1977 SEALING RINGS–CAST IRON
SAE AS63850-2-2003 AS63850-864 Sealing Ring
SAE J281-1992 Cast Iron Sealing Rings
SAE AS3112-1-1948 AS3112 Sealing Washer
SAE AS2516-3-2015 AS2516 Sealing Washer
SAE AS2598-5-1946 AS2598 Filler Sealing Ring
SAE AS5364-6-2015 AS5364 Filler Sealing Ring
SAE J1236-1993 CAST IRON SEALING RINGS (METRIC)
SAE AS1253A-1985 TEE - BULKHEAD AND UNIVERSAL FLARED TUBE, WITH SEAL RING
SAE AGS3820-1-1968 AGS3820-869 Washer, Seal, Flat
SAE AS1253-1976 TEE - BULKHEAD AND UNIVERSAL FLARED TUBE, WITH SEAL RING
SAE AMS7320-1940 SEALING RINGS Bronze Castings
SAE AS3085-1974 Packing, Preformed - AMS 7280,'O' Ring
SAE AMS7322-1940 SEALING RINGS Bronze Castings
SAE J1236-2015 Cast Iron Sealing Rings (Metric)
SAE AMS-HH-G-101-2000 Gasket, Metallic-Encased
SAE AMS-HH-G-101A-2014 Gasket, Metallic-Encased
SAE AMS3255A-2010 Sealing Tape, Sheet, or Gasket, Polytetrafluoroethylene, Expanded (EPTFE) Oil and Water Resistant
SAE AMS7322B-1962 SEALING RINGS, CAST BRONZE 80Cu - 19Sn
SAE AS5018-2015 WASHER, FLAT, BEAM SEAL FITTING
SAE AMS7322A-1951 SEALING RINGS, CAST BRONZE 80Cu - 19Sn
SAE AS1368B-2006 FITTING, REDUCER-EXTERNAL THREAD FLARED TUBE FOR SEAL RING FSC 4730
SAE HS-1417-1983 Fluid Sealing Handbook- Radial Lip Seals May 1983
SAE ARP1832-2003 Color Identification for O-ring Seals
SAE AS5018-1995 Washer, Flat, Beam Seal Fitting
SAE AS407-5-1940 AS407 Sealing Ring. Fuel. Drain Valve
SAE MA3434-1987 Packing, Preformed - O-Ring Seal, AMS 7273, Metric
SAE AS3578-2018 PACKING, PREFORMED – O-RING SEAL AMS7271
SAE AS4716A-2005 (R) Gland Design, O-ring and Other Elastomeric Seals
SAE ARP1832-1985 Color Identification for O-Ring Seals
SAE AS1367-2011 CROSS-FLARED TUBE WITH SEAL RING
SAE AS1097B-2014 SEAL RING, 37° FLARED TUBE FITTING END
SAE ARP1832A-2011 Color Identification for O-Ring Seals
SAE AMS7320A-1951 SEALING RINGS, CAST LEADED BRONZE 79Cu - 16Sn - 5Pb
SAE AS3551-2018 PACKING, PREFORMED – O-RING SEAL AMS7272
SAE AS3581-2018 PACKING, PREFORMED – O-RING SEAL AMS7259
SAE AS3570-2018 PACKING, PREFORMED – O-RING SEAL AMS7274
SAE AS3569-2018 PACKING, PREFORMED – O-RING SEAL AMS7270
SAE AMS7320B-1962 SEALING RINGS, CAST LEADED BRONZE 79Cu - 16Sn - 5Pb
SAE AS1252-2011 TEE - FLARED TUBE WITH SEAL RING
SAE AS3581A-2020 PACKING, PREFORMED - O-RING SEAL AMS7259
SAE AS481-2002 FLANGE PILOT-ACCESSORY, 5″-8″-10″ BOLT CIRCLE
SAE AS9141B-2004 Gasket - Metal O-Ring, .035 Tube X .006 Wall, Cres - UNS S32100 FSC 5330
SAE AS1097A-1991 SEAL RING, 37 DEGREE FLARED TUBE FITTING END
SAE AS1250-2011 ELBOW - FLARED TUBE, 90° WITH SEAL RING
SAE AS83461/1-2009 Packing, Preformed - M83461 O-Ring
SAE AS1097-1976 SEAL RING, 37 DEGREE FLARED TUBE FITTING END
SAE ARP674C-2001 (R) Groove Design, Metal O-Ring Gasket

SCC

MIL MIL-L-81561/3-1994 LIFE PRESERVER, INFLATABLE, AIRCREWMEN, HEAT SEALED, WITH INFLATION DEVICE, TYPE LPU-21D/P
MIL MIL-L-81561/4-1994 LIFE PRESERVER, INFLATABLE, AIRCREWMEN, HEAT SEALED, WITHOUT INFLATION DEVICE, TYPE LPU-23C/P
MIL MIL-L-52413B-1990 LIFE PRESERVER, YOKE: ORAL INFLATION, TRAPPED AIR TYPE, DESIGN 9008 (NO S/S DOCUMENT) (SUPERSEDING MIL-L-52413A)
SPC GB/T 37210-2018 Nuclear radiation-resistant inflatable and water-filled rubber sealing products (TEXT OF DOCUMENT IS IN CHINESE)
DIN 470 E:2008 Draft Document - Sealing washers
IEC 60509:1976 Sealed nickel-cadmium button rechargeable single cells
MIL MIL-L-81561/6-1994 LIFE PRESERVER, INFLATABLE, YOKE, HEAT SEALED, TYPE LPU-32/P
NS 173:1968 Sealing constructions for flanges — NP 10 — 100 — Sealing: O-ring
MIL MIL-C-51098E-1981 CYLINDER, NITROGEN-FILLED, PUNCTURABLE SEAL (SUPERSEDING MIL-C-51098D)
HOLDEN HN 2419-2003 FKM ELASTOMER, O-RING SEAL
MIL MIL-G-21569B-1965 GASKETS, CYLINDER LINER SEAL, SYNTHETIC RUBBER (SUPERSEDING MIL-G-21569A)
BS 1806:1962 Specification for dimensions of toroidal sealing rings ('O' seals and their housings)
MIL MIL-L-81561/5-1994 LIFE PRESERVER, INFLATABLE, CEMENTED, UTILITY, TYPE LPP-1A
NS-EN 415-3:2021 Safety of packaging machines – Part 3: Form, fill and seal machines; fill and seal machines
MIL MIL-R-24661-1985 RING BUOY, LIFESAVING, AUTO-INFLATABLE
MIL MIL-L-81787B-1983 LIFE PRESERVER, INFLATABLE, UTILITY, TYPE LPP-1A (SUPERSEDING MIL-L-81787A)
MIL MIL-PRF-23145C-2018 INFLATION ASSEMBLIES, LIFE PRESERVER
MIL MIL-C-16385E-1972 CARTRIDGE, CARBON DIOXIDE, INFLATABLE LIFE PRESERVER USE (SUPERSEDING MIL-C-16385D)
MIL MIL-R-8791/1-1989 RETAINER, PACKING, HYDRAULIC AND PNEUMATIC, POLYTETRAFLUOROETHYLENE RESIN, (SINGLE TURN) (S/S BY SAE-AS8791/1A)
DIN 65304:2019 Aerospace - Sealing ring - Technical specification
ASD-STAN prEN 3376:1970 Limits of surface imperfections of elastomeric toroidal sealing rings (o-rings)
MIL MIL-L-81561/1-1994 LIFE PRESERVER, INFLATABLE, AIRCREWMEN, CEMENTED, WITH INFLATION DEVICE, TYPE LPU-21C/P
MIL MIL-L-81561/2-1994 LIFE PRESERVER, INFLATABLE, AIRCREWMEN, CEMENTED, WITHOUT INFLATION DEVICE, TYPE LPU-23B/P

Japanese Industrial Standards Committee (JISC)

JIS B 2401-4:2012 O-rings -- Part 4: Anti-extrusion rings (back-up rings)
JIS B 2401-1:2012 O-rings -- Part 1: O-rings
JIS B 2401:1999 O-rings
JIS B 2401:1991 O-rings
JIS C 8705:2012 Sealed nickel-cadmium rechargeable single cells
JIS C 8705:2006 Sealed nickel-cadmium rechargeable single cells
JIS B 2407:1995 Back-up rings for O-rings
JIS B 2401 ERRATUM 1:2001 O-rings (Erratum 1)
JIS C 8705:1998 Sealed nickel-cadmium cylindrical rechargeable single cells

Association Francaise de Normalisation

NF ISO 11040-3:2019 Seringues préremplies - Partie 3 : rondelles d'étanchéité pour cartouches dentaires d'anesthésie locale
NF E29-584:1979 Sealing washers.
NF R99-001:1943 Radial friction sealing rings.
NF R93-920:1993 Raod vehicles. Circular sealing rings.
NF T47-306:1985 Joints rings used for gaz supply pipes and fittings. Specification for material.

British Standards Institution (BSI)

BS ISO 3601-4:2008 Fluid power systems - O-rings - Anti-extrusion rings (back-up rings)

U.S. Military Regulations and Norms

ARMY MIL-O-70548-1986 OBTURATING BAND, PLASTIC SPLIT (MOLDED)
ARMY MIL-O-70548 NOTICE 3-2009 OBURATING BAND, PLASTIC SPLIT (MOLDED)
ARMY MIL-O-70548 REINST NOTICE 2-1997 OBTURATING BAND, PLASTIC SPLIT (MOLDED)
ARMY MIL-O-71152 REINST NOTICE 2-1996 OBTURATING RING, PLASTIC SPLIT (MOLDED)
ARMY MIL-O-71130-1992 OBTURATING BAND, PLASTIC SPLIT (MOLDED)
ARMY MIL-O-70548 (6)-1997 OBTURATING BAND, PLASTIC SPLIT (MOLDED)
ARMY MIL-O-71152-1993 OBTURATING RING, PLASTIC SPLIT (MOLDED)
ARMY MIL-O-71130 REINST NOTICE 2-1996 OBTURATING BAND, PLASTIC SPLIT (MOLDED)
ARMY MIL-O-71152 (2)-2001 OBTURATING RING, PLASTIC SPLIT (MOLDED)
ARMY MIL-HDBK-692 B-1983 GUIDE TO THE SELECTION OF RUBBER O-RINGS
ARMY A-A-52524/7 A VALID NOTICE 1-2008 Seal, Plain Encased: Dual Seal, Internal Seal Spring Loaded
ARMY MS53044 REV C NOTICE 3-1998 WHEEL, PNEUMATIC TIRE-DISK TYPE, WITH RING, FOR TACTICAL WHEELED VEHICLES
ARMY MS53044 REV C-1982 WHEEL, PNEUMATIC TIRE-DISK TYPE, WITH RING, FOR TACTICAL WHEELED VEHICLES
ARMY A-A-52524/17 A VALID NOTICE 1-2008 Seal, Plain or Seal, Plain Encased: Single Sealing Member, Extended Case

United States Navy

NAVY MIL-PRF-17927 D-2004 GASKETS, FLAME RESISTANT HINGED CLOSURE
NAVY MS22048 REV A VALID NOTICE 1-1991 GROMMET AND WASHER, PARACHUTE PACK
NAVY MS22048 REV A-1961 GROMMET AND WASHER, PARACHUTE PACK
NAVY QPL-81561/6-1-1994 LIFE PRESERVER, INFLATABLE, YOKE HEAT SEALED, TYPE LPU-32/P
NAVY MIL-L-81561/4 NOTICE 3-2008 LIFE PRESERVER, INFLATABLE, YOKE, HEAT SEALED, TYPE LPU-23C/P
NAVY MIL-L-81561/6 VALID NOTICE 3-2013 LIFE PRESERVER, INFLATABLE, YOKE, HEAT SEALED, TYPE LPU-32/P
NAVY QPL-81561/6-1 REINST NOTICE 2-2008 LIFE PRESERVER, INFLATABLE, YOKE, HEAT SEALED, TYPE LPU-32/P
NAVY MIL-L-81561/6 NOTICE 2-2008 LIFE PRESERVER, INFLATABLE, YOKE, HEAT SEALED, TYPE LPU-32/P
NAVY MIL-L-81561/6-1994 LIFE PRESERVER, INFLATABLE, YOKE, HEAT SEALED, TYPE LPU-32/P
NAVY QPL-81561/4-1-1994 LIFE PRESERVER, INFLATABLE, AIRCREWMEN, HEAT SEALED WITHOUT INFLATION DEVICE, TYPE LPU-23C/P
NAVY QPL-81561/4-1 REINST NOTICE 2-2008 LIFE PRESERVER, INFLATABLE, AIRCREWMEN, HEAT SEALED WITHOUT INFLATION DEVICE, TYPE LPU-23C/P

PL-PKN

PN M73100-1966 Seal rings U and V form Specifica?ions
PN BN 2211-02-1962 Cylindrical equipment edge seals

German Institute for Standardization

DIN 7603:2001-05 Sealing rings
DIN 7750:1979 Rubber sealing rings for lever stoppers of bottles
DIN 470 E:2008-10 Sealing washers
DIN 470:2011 Sealing washers
DIN 470:2011-03 Sealing washers
DIN 470:1974 Sealing Washers
DIN 20013:1989 Sealings for pneumatic stowing pipes
DIN 78027:1979 Tubeless clamp in tyre valves (with O-ring seal)
DIN 87155:2015 Grey cast-iron coarse filters - Sealing rings
DIN 3436:2012-06 Gas valves for gas installations - Nozzles with conical sealing and gasket
DIN 87155:1954 Grey cast-iron coarse filters; sealing rings
DIN 3436:2012 Gas valves for gas installations - Nozzles with conical sealing and gasket
DIN 86129:1986 Plug screws and flat sealing rings for welded-in screw caps for filling and sounding pipes
DIN 4000-162:2017 Tabular layout of properties - Part 162: Washers and rings
DIN 86129 E:2017-06 Plug screws and flat sealing rings for welded-in screw caps for filling and sounding pipes
DIN 86129:2018 Plug screws and flat sealing rings for welded-in screw caps for filling and sounding pipes
DIN 4000-162:2009 Tabular layout of properties - Part 162: Washers and rings
DIN 7750:1979-01 Rubber sealing rings for lever stoppers of bottles
DIN 87155 E:2014-04 Grey cast-iron coarse filters - Sealing rings
DIN 65304:2009 Aerospace - Sealing ring - Technical specification
DIN 78027:1979-02 Tubeless clamp in tyre valves (with O-ring seal)
DIN 65304:2019-06 Aerospace - Sealing ring - Technical specification
DIN 87155:2015-01 Grey cast-iron coarse filters - Sealing rings
DIN 74286:1988-05 Air braking systems; packing rings for hose couplings for double line braking systems
DIN 65304 E:2017-05 Aerospace - Sealing ring - Technical specification

Defense Logistics Agency

DLA AN996 REV 2-1974 RING - LOCK
DLA AN996 REV 2 (1)-2002 RING - LOCK
DLA MIL-PRF-83536/20 A VALID NOTICE 1-2010 Relays, Electromagnetic, Established Reliability, 4PDT, Low Level to 10 Amperes, Magnetic Latch, Hermetically Sealed, All Welded, AC Coils
DLA A-A-59559 A VALID NOTICE 1-2012 Post, Binding, Electrical, Waterproof (Insulated), Dual O-Ring Seal
DLA MIL-PRF-83536/21 A VALID NOTICE 1-2010 Relays, Electromagnetic, Established Reliability, 3PDT, Low Level to 10 Amperes, Permanent Magnetic Drive, Hermetically Sealed, All Welded, DC Coil
DLA MIL-PRF-83536/18 C-2012 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 4PDT, LOW LEVEL TO 10 AMPERES, MAGNETIC LATCH, HERMETICALLY SEALED, ALL WELDED, DC COILS
DLA MIL-PRF-83536/18 B-2010 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 4PDT, LOW LEVEL TO 10 AMPERES, MAGNETIC LATCH, HERMETICALLY SEALED, ALL WELDED, DC COILS
DLA MIL-PRF-83536/12 A VALID NOTICE 1-2010 Relays, Electromagnetic, Established Reliability, DPDT, Low Level to 10 Amperes, Magnetic Latch, Hermetically Sealed, All Welded, DC Coils
DLA MIL-PRF-83536/23 A VALID NOTICE 1-2010 Relays, Electromagnetic, Established Reliability, 3PDT, Low Level to 10 Amperes, Permanent Magnetic Drive, Magnetic Latch, Hermetically Sealed, All Welded, DC Coil
DLA MIL-PRF-83536/12 B-2011 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, DPDT, LOW LEVEL TO 10 AMPERES, MAGNETIC LATCH, HERMETICALLY SEALED, ALL WELDED, DC COILS

RO-ASRO

STAS 7319-1971 Seals for muchiile building HOUSINGS FOR O RINGS
STAS 4218-1977 FELT FOR GASKETS
STAS 7320/3-1983 Scals for machine building HOUSING FOR O RINGS Dimcnsions
STAS 5891-1988 METALLIC SEAL IN G CAPS
STAS 7513/4-1974 Agglomerated cork boards for gaskets BOARDS FOR PROTECTION GASKETS TYPE B
STAS 12100/3-1988 Equipments for wellbead SEALING METALLIC RING GASKETS
STAS 6940-1964 Refrigeration equipment. Copper seals and caps

International Organization for Standardization (ISO)

ISO 3601-4:2008 Fluid power systems - O-rings - Part 4: Anti-extrusion rings (back-up rings)
ISO 3603:1977 Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints; Pressure test for leakproofness
ISO 3604:1976 Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints; Pressure test for leakproofness under conditions of external hydraulic pressure
ISO 13926-3:2012 Pen systems - Part 3: Seals for pen-injectors for medical use

YU-JUS

JUS M.C4.505-1989 Pneumatic tubing. Gasket ring. Shape and dimensions
JUS M.C4.500-1989 Pneumatic tubing. Gasket rings. Shape and dimensions

Korean Agency for Technology and Standards (KATS)

KS K 9323-2008 Double flange rings(Reversible type)
KS R 2026-2007 Tyre valve core housing and spuds for automobiles
KS K 9323-1983 Double flange rings(Reversible type)
KS R 2026-1982 Tyre valve core housing and spuds for automobiles
KS K 9322-2000 Porous sintered metal single flange rings
KS K 9322-1985 Porous sintered metal single flange rings

IT-UNI

UNI 2211-1954 Gaskets for bulkhead seal channels

RU-GOST R

GOST 24191-1980 Packing hoop. Design
GOST 18829-2017 Rubber o-ring seals for hydraulic and pneumatic equipment. Specifications

SAE - SAE International

SAE J281-1980 CAST IRON SEALING RINGS
SAE AMS3255B-2017 Sealing Tape, Sheet, or Gasket, Polytetrafluoroethylene, Expanded (EPTFE) Oil and Water Resistant
SAE MA3434A-2019 Packing, Preformed - O-Ring Seal, AMS 7273, Metric
SAE AS1097B-1994 SEAL RING@ 37° FLARED TUBE FITTING END
SAE AMS7320E-2005 Rings@ Sealing@ Cast Leaded-Tin Bronze@ 80Cu - 16Sn - 5Pb As Cast
SAE AS481-1957 "FLANGE PILOT-ACCESSORY@ 5""- 8-10"" BOLT CIRCLE"
SAE AS83461/1A-2015 Packing, Preformed - M83461 O-Ring
SAE AS9141A-2001 Gasket - Metal O-Ring, .035 Tube X .006 Wall, Cres - UNS S32100 FSC 5330
SAE AS481B-1971 FLANGE PILOT-ACCESSORY@ O RING SEAL

Indonesia Standards

SNI 06-1490-1989 Rubber seals for glass of motor vehicles

Aeronautical Radio Inc.

ARINC 654 ITEM 8.0 Environmental Sealing Gaskets

Underwriters Laboratories (UL)

UL 157-2015 UL Standard for Safety Gaskets and Seals
UL 157-1996 UL Standard for Safety Gaskets and Seals Second Edition; Reprint with Revisions Through and Including March 12, 2007

Aerospace Industries Association

AIA NASM82496-1998 Screws, Machine, Self-Sealing, Integral O-Ring FSC 5305
AIA NAS 1598-1997 (Inactive)Washer - Sealing Rev. 3

VN-TCVN

TCVN 6040-1995 Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints.Pressure test for leakproofness
TCVN 6041-1995 Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints.Pressure test for leakproofness under conditions of external hydraulic pressure