din sealing ring

din sealing ring, Total:337 items.

The international standard classification for "din sealing ring" includes: Components for aerospace construction , Seals , Seals, glands , Bodies and body components , Mechanical engineering drawings , Other standards related to sterilization and disinfection .

The Chinese standard classification for "din sealing ring" includes: Pipe fittings, clamps and seals , Fasteners , Rubber seal , Pipeline fittings , Sealing and sealing device , Vacuum technique and equipment , Hydraulic and pneumatic device , Vehicle body (cab) and accessories , Rubber products in general , Synthetic rubber , Basic standards and general methods , Electrochemical power source , Shafting equipment , Public medical equipment .

---

Professional Standard - Aviation

• HB 5585-1981 rubber sealed loop
• HB 5584-1981 rubber sealed loop
• HB 4-58-1987 Protection Ring for Sealing Structure of Rubber Ring with Circular Cross-section
• HB 6030-1986 Through the partition with sealing gasket tee pipe joint
• HB 2575-1976 sealing ring
• HB 7520-1997 O-shaped Rubber Seal - Groove
• HB 5585-1983 rubber sealed loop
• HB 7512-1997 Dimensional tolerance of O-ring rubber seal
• HB 7509-1997 Dimensional tolerance of O-ring rubber seal
• HB 4-57-1987 Round section rubber ring sealing structure
• HB 7510-1997 Dimensional tolerance of O-ring rubber seal
• HB 1-504-1983 Threaded connection sealing washer?
• HB 4-56-1976 Round section rubber ring sealing structure
• HB 5974-1996 Straight-through pipe joint with sealing gasket through the partition
• HB 7514-1997 Dimensional tolerance of O-ring rubber seal
• HB 7467-1996 Technical Specification for Flexible Graphite Seal Ring
• HB 7466-1996 Flexible Graphite Seal Ring
• HB 7516-1997 Dimensional tolerance of O-ring rubber seal
• HB/Z 4-1987 Design requirements for O-ring and sealing structure
• HB 953-2000 U-shaped sealing ring
• HB 6000-1986 Through the bulkhead with sealing gasket 45° elbow joint
• HB 7518-1997 Dimensional tolerance of O-ring rubber seal
• HB 7513-1997 Dimensional tolerance of O-ring rubber seal
• HB 7521-1997 Acceptance Specification for O-shaped Rubber Seal
• HB 7515-1997 Dimensional tolerance of O-ring rubber seal
• HB 7517-1997 Dimensional tolerance of O-ring rubber seal
• HB 4-58-1976 Circular section rubber ring sealing structure/protection ring
• HB 4-56-1987 Round section rubber ring sealing structure
• HB 6691-1993 Phosphate Ester Resistant Hydraulic Oil O-Ring Rubber Seal Ring
• HB 5584-1983 rubber sealed loop
• HB 6029-1986 Through the partition with sealing gasket tee pipe joint
• HB 5974-1986 Straight-through pipe joint with sealing gasket through the partition
• HB 7511-1997 Dimensional tolerance of O-ring rubber seal
• HB/Z 4-1995 Requirements for the Design of O-type Seal Ring and Seal Structure
• HB 7519-1997 Dimensional tolerance of O-ring rubber seal
• HB 956-2000 sealing ring

Professional Standard - Aerospace

• QJ 312-1978 sealing ring
• QJ 1035.2-1986 Selection of O-shaped Rubber Sealing Ring and Design Specifications for Sealed Chamber
• QJ 1035.1-1986 O-shaped Rubber Sealing Ring
• QJ 2692-1994 L-shape Seals Made From Neoprene Compound

Professional Standard - Machinery

• JB/T 6997-1993 U-shaped inner skeleton rubber seal ring
• JB/T 5278.3-1991 Copper Wire Seal Can Be Baked Vacuum Flange Copper Wire Sealing Ring Structure Size?
• JB/T 1002-1977 Gasket
• JB/ZQ 4224-2006 O-shaped rubber seal ring
• JB/T 14581-2024 Spring energized seal for valve
• JB/T 7757.2-1995 O-ring rubber for mechanical seal
• JB/ZQ 4786-2006 J-shaped unreinforced rubber seal ring
• JB/T 6994-2007 VD shape rubber seal ring
• JB/ZQ 4264-2006 Yx-shaped seal ring for holes
• JB/T 1735-1991 Bottom valve disc sealing ring
• JB/T 6997-2007 Rubber coverd U shape seals
• JB/T 6657-1993 Dimension and Tolerance for Sealing Rings Intended to Be Used in Air Cylinders
• JB/T 12490-2015 O-ring sealed motorcycle chains
• JB/T 1736-1991 Swing check valve disc sealing ring
• JB/T 982-1977 Combined Sealing Washer
• JB/T 7757.2-2006 The rubber O - ring for mechanical seal
• JB/T 6994-1993 VD rubber sealing ring
• JB/ZQ 4265-2006 Yx-shaped Seal Ring for Axis
• JB/ZQ 4784-2006 Seal washer

Professional Standard - Automobile

• QC/T 666-2010 Seals for automotive air conditioners (HFC-134a) Part 1: O-ring rubber seals
• QC/T 638-2023 Sealing washer
• QC/T 666.1-2010 Auto air-condiction (HFC-134) seal parts Part 1:rubber O-rings
• QC/T 638-2000 Gasket

Military Standard of the People's Republic of China-General Armament Department

• GJB 125.6.1A-1989 Double-ear seal traveling self-locking nut sealing ring
• GJB 125.5-1986 Double-ear sealing swimming self-locking nut pressure ring
• GJB 125.5A-1989 Double-ear sealing swimming self-locking nut pressure ring
• GJB 125.6.2A-1989 Double-ear seal traveling self-locking nut sealing ring
• GJB 125.6-1986 Double-ear seal traveling self-locking nut sealing ring

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

• GB/T 9877.1-1988 Rotary shaft lip seals--Design criteria for standard applications--Part 1:Rubber covered rotary shaft lip seals
• GB/T 33154-2016 Rubber seals of dewing bearing used in the wind power industry
• GB/T 9877.3-1988 Rotary shaft lip seals--Design criteria for standard applications--Part 3:Assembled rotary shaft lip seals
• GB/T 5720-2008 Test methods for rubber O-rings
• GB 7039-1986 Rubber compounds for sealing ring of reciprocating applications
• GB/T 5720-1993 Test methods for rubber O rings
• GB/T 27572-2011 Rubber seals—Joint rings for pipelines for hot-water supply up to 110 ℃—Specification for the materials
• GB 29992-2013 Rubber Sealing Rings for Pressure Cooker
• GB/T 10708.1-2000 Reciprocating rubber seals; Design criteria for standard applications; Part 1 : Rubber seals of act on single seal
• GB 7040-1986 Rubber compounds for rotary shaft lip seals
• GB/T 10708.2-2000 Reciprocating rubber seals; Design criteria for standard applications; Part 2:Rubber seals of act on double seal
• GB/T 9877.2-1988 Rotary shaft lip seals--Design criteria for standard applications--Part 2:Metal cased rotary shaft lip seals
• GB 9877.1-1988 Rotary shaft lip seals-Design criteria for standard applications-Part 1:Rubber covered rotary shaft lip seals
• GB/T 10708.3-2000 Reciprocating rubber seals; Design criteria for standard applications; Part 3 : Rubber seals for wipers
• GB 9877.2-1988 Rotary shaft lip seals-Design criteria for standard applications-Part 2:Metal cased rotary shaft lip seals
• GB 9877.3-1988 Rotary shaft lip seals-Design criteria for standard applications-Part 3:Assembled rotary shaft lip seals
• GB/T 23658-2009 Elastomeric seals - Material requirement for seals used in pipes and fittings carrying gaseous fuels and hydricarbon fluid
• GB/T 4459.6-1996 Mechanical drawings--Representation of seals for dynamic application
• GB 4846-1984 Rubber sealing ring for pressure cooker
• GB/T 16593-1996 Rotary shaft lip type seals-Vocabulary
• GB/T 15326-1994 Appearance quality for rotary shaft lip seals

机械电子工业部

• JB 1736-1991 Swing check valve disc seal ring
• JB 1735-1991 Bottom valve disc seal

工业和信息化部

• JB/T 7757-2020 The rubber O-ring for mechanical seal
• HG/T 6048-2022 O-ring rubber seal for roller cone drill bits
• HG/T 5839-2021 Gas spring seal ring
• WJ/T 1470-2014 Clamp base and its parts and components sealing rings

Professional Standard - Military and Civilian Products

• WJ 1951-1990 Piping System Gaskets
• WJ 1470-1985 Clamp seat and its parts and components sealing ring
• WJ 186-1994 Sealing felt ring of standard parts of armored vehicles

Professional Standard - Chemical Industry

• HG/T 3653-1999 Oval cross section and plastic Sealing washer
• HG/T 2943-1984 Rubber sealing ring for Pressure cooker
• HG/T 2811-1996 Rubber Materials of Rotary Shaft Lip Seals
• HG/T 2810-1996 Reciprocating motion seal ring rubber material
• HG/T 3980-2007 Sealing rings of automobile bearing
• HG/T 2021-2014 O-rings resistant to high temperature and oil
• HG/T 2943-1984(1997) Rubber sealing ring for Pressure cooker
• HG/T 2810-2008 Compounds of reciprocating rubber seals
• HG/T 3089-2001 Rubber mixture of O--ring seals for fuel
• HG/T 3097-2006 Rubber seals-Joint rings for pipelines for hot-water supply up to 110℃ - Specification for the materials

Group Standards of the People's Republic of China

• T/SXJP 072-2023 Water medium hydraulic support sealing ring
• T/TCMCA 0029-2024 New seal toothed chain
• T/CAAMTB 102-2022 Special sealing rings for methanol vehicles

Professional Standard - Ferrous Metallurgy

• YB/T 4059-1991 Metal clad high temperature seal ring
• YB/T 4059-2007 High Temperature Cladding Metal O-ring

冶金工业部

• YB 4059-1991 Metal covered high temperature sealing ring

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

• GB/T 29992-2013 Rubber sealing rings for pressure cooker
• GB/T 29992-2017 Rubber sealing rings for pressure cooker

Professional Standard - Electron

• SJ 1771-1981 Metallic bell cover for vacuum equipment--Sealing collar
• SJ/T 10161.7-1991 Vacuum rubber seal plane flanges - Dimensions of O rubber sealing rings

工业和信息化部/国家能源局

• JB/T 12490-2014 "O" type seal motorcycle chain

Professional Standard - Light Industry

• QB/T 2459.3-1999 LR6/LR03 Alkaline Manganese-Zinc Cells Seal

Professional Standard - Nuclear Industry

• EJ 24-1975 Latex gloves fastening sealing rubber ring

Professional Standard-Ships

• CB 1236-1995 Specification of O-shaped Rubber Sealing Ring and Design Method of Seal Structure for Torpedo

Professional Standard - Traffic

• JT/T 342.2-1995 Vessels rudder axles and sealing arrangement

Professional Standard - Medicine

• YY/T 0158-2013 Gasket ring on pressure steam sterilizer

Japanese Industrial Standards Committee (JISC)

• JIS B 2401-4:2012 O-rings -- Part 4: Anti-extrusion rings (back-up rings)
• JIS B 2401-1:2012 O-rings -- Part 1: O-rings
• JIS B 2401:1999 O-rings
• JIS B 2401:1991 O-rings
• JIS B 2407:1995 Back-up rings for O-rings
• JIS B 2401 ERRATUM 1:2001 O-rings (Erratum 1)
• JIS B 2406:1991 O-rings housings -- Design criteria

British Standards Institution (BSI)

• BS ISO 3601-4:2008 Fluid power systems - O-rings - Anti-extrusion rings (back-up rings)

German Institute for Standardization

• DIN 7603:2001-05 Sealing rings
• DIN 470 E:2008-10 Sealing washers
• DIN 470:2011 Sealing washers
• DIN 470:2011-03 Sealing washers
• DIN 470:1974 Sealing Washers
• DIN 87155:2015 Grey cast-iron coarse filters - Sealing rings
• DIN 87155:1954 Grey cast-iron coarse filters; sealing rings
• DIN 4000-162:2017 Tabular layout of properties - Part 162: Washers and rings
• DIN 4000-162:2009 Tabular layout of properties - Part 162: Washers and rings
• DIN 7750:1979-01 Rubber sealing rings for lever stoppers of bottles
• DIN 87155 E:2014-04 Grey cast-iron coarse filters - Sealing rings
• DIN 65304:2009 Aerospace - Sealing ring - Technical specification
• DIN 7750:1979 Rubber sealing rings for lever stoppers of bottles
• DIN 65304:2019-06 Aerospace - Sealing ring - Technical specification
• DIN 87155:2015-01 Grey cast-iron coarse filters - Sealing rings
• DIN 65304 E:2017-05 Aerospace - Sealing ring - Technical specification
• DIN 49984:1954-11 Electric luminaires; profile sealing ring for luminaire glasses with flanged edges according to DIN 49993
• DIN 89349:2008-02 Sealing rings for glands for electrical cables and insulated wires; Text in German and English
• DIN 3865:2002 Compression fittings - Nipple 24° with O-ring - For compression joint according to DIN EN ISO 8434-1
• DIN 89347:1992 Washers for glands for cables and cords
• DIN 65219 E:2017-05 Aerospace series - Sealing rings - Dimensions, masses

Defense Logistics Agency

• DLA AN996 REV 2-1974 RING - LOCK
• DLA AN996 REV 2 (1)-2002 RING - LOCK
• DLA MS51840 REV C-1983 PLUG, MACHINE THREAD, O-RING
• DLA MS51840 REV C NOTICE 2-1997 PLUG, MACHINE THREAD, O-RING
• DLA MS51840 REV C VALID NOTICE 1-1996 PLUG, MACHINE THREAD, O-RING
• DLA MS51840 REV C VALID NOTICE 3-2004 PLUG, MACHINE THREAD, O-RING

RO-ASRO

• STAS 7319-1971 Seals for muchiile building HOUSINGS FOR O RINGS
• STAS 4218-1977 FELT FOR GASKETS
• STAS 7320/3-1983 Scals for machine building HOUSING FOR O RINGS Dimcnsions
• STAS 5891-1988 METALLIC SEAL IN G CAPS
• STAS 7513/4-1974 Agglomerated cork boards for gaskets BOARDS FOR PROTECTION GASKETS TYPE B
• STAS 12100/3-1988 Equipments for wellbead SEALING METALLIC RING GASKETS
• STAS 6940-1964 Refrigeration equipment. Copper seals and caps
• STAS 4698-1976 Fire fighting equipment RUBBER GASKETS FOR COUPLINGS
• STAS 6577-1970 Rolling bcaring cases FELT RING OR STRIP SEALINGS

Association Francaise de Normalisation

• NF E29-584:1979 Sealing washers.
• NF R99-001:1943 Radial friction sealing rings.
• NF R93-920:1993 Raod vehicles. Circular sealing rings.

Society of Automotive Engineers (SAE)

• SAE AS3381-1-1951 AS3381 Sealing Ring
• SAE AS3387-1-1951 AS3387 Sealing Ring
• SAE AS3393-1-1951 AS3393 Sealing Ring
• SAE J281A-1977 SEALING RINGS–CAST IRON
• SAE AS63850-2-2003 AS63850-864 Sealing Ring
• SAE J281-1992 Cast Iron Sealing Rings
• SAE AS3112-1-1948 AS3112 Sealing Washer
• SAE AS2516-3-2015 AS2516 Sealing Washer
• SAE AS2598-5-1946 AS2598 Filler Sealing Ring
• SAE AS5364-6-2015 AS5364 Filler Sealing Ring
• SAE J1236-1993 CAST IRON SEALING RINGS (METRIC)
• SAE AGS3820-1-1968 AGS3820-869 Washer, Seal, Flat
• SAE AMS7320-1940 SEALING RINGS Bronze Castings
• SAE AS3085-1974 Packing, Preformed - AMS 7280,'O' Ring
• SAE AMS7322-1940 SEALING RINGS Bronze Castings
• SAE J1236-2015 Cast Iron Sealing Rings (Metric)
• SAE AMS-HH-G-101-2000 Gasket, Metallic-Encased
• SAE AMS-HH-G-101A-2014 Gasket, Metallic-Encased
• SAE AMS7322B-1962 SEALING RINGS, CAST BRONZE 80Cu - 19Sn
• SAE AS5018-2015 WASHER, FLAT, BEAM SEAL FITTING
• SAE AMS7322A-1951 SEALING RINGS, CAST BRONZE 80Cu - 19Sn
• SAE AIR1707B-2014 Patterns of O-ring Failures
• SAE ARP1832-2003 Color Identification for O-ring Seals
• SAE HS-1417-1983 Fluid Sealing Handbook- Radial Lip Seals May 1983
• SAE AIR1707A-2003 Patterns of O-ring Failures
• SAE AS5018-1995 Washer, Flat, Beam Seal Fitting
• SAE AS407-5-1940 AS407 Sealing Ring. Fuel. Drain Valve
• SAE MA3434-1987 Packing, Preformed - O-Ring Seal, AMS 7273, Metric
• SAE AS4309B-2007 Nipple - Flared Tube to Pipe Thread, for Seal Ring
• SAE AS3578-2018 PACKING, PREFORMED – O-RING SEAL AMS7271
• SAE AS4716A-2005 (R) Gland Design, O-ring and Other Elastomeric Seals
• SAE ARP1832-1985 Color Identification for O-Ring Seals
• SAE AS1367-2011 CROSS-FLARED TUBE WITH SEAL RING
• SAE ARP1832A-2011 Color Identification for O-Ring Seals
• SAE AMS7320A-1951 SEALING RINGS, CAST LEADED BRONZE 79Cu - 16Sn - 5Pb
• SAE AS3551-2018 PACKING, PREFORMED – O-RING SEAL AMS7272
• SAE AS3581-2018 PACKING, PREFORMED – O-RING SEAL AMS7259
• SAE AS1097B-2014 SEAL RING, 37° FLARED TUBE FITTING END
• SAE AS3570-2018 PACKING, PREFORMED – O-RING SEAL AMS7274
• SAE AS3569-2018 PACKING, PREFORMED – O-RING SEAL AMS7270
• SAE AMS7320B-1962 SEALING RINGS, CAST LEADED BRONZE 79Cu - 16Sn - 5Pb
• SAE AS1252-2011 TEE - FLARED TUBE WITH SEAL RING
• SAE AS1369-2011 PLUG-FLARED TUBE WITH SEAL RING
• SAE AS3581A-2020 PACKING, PREFORMED - O-RING SEAL AMS7259
• SAE AS481-2002 FLANGE PILOT-ACCESSORY, 5″-8″-10″ BOLT CIRCLE
• SAE AS9141B-2004 Gasket - Metal O-Ring, .035 Tube X .006 Wall, Cres - UNS S32100 FSC 5330
• SAE AS83461/1-2009 Packing, Preformed - M83461 O-Ring
• SAE AS1097-1976 SEAL RING, 37 DEGREE FLARED TUBE FITTING END
• SAE ARP674C-2001 (R) Groove Design, Metal O-Ring Gasket
• SAE AS1097A-1991 SEAL RING, 37 DEGREE FLARED TUBE FITTING END
• SAE AS1250-2011 ELBOW - FLARED TUBE, 90° WITH SEAL RING
• SAE AS568B-2001 Aerospace Size Standard for O-Rings
• SAE AS1251D-2023 FITTING, UNION, FLARED TUBE, FOR SEAL RING
• SAE TS104-5-2006 TS104 Manufacturing Specification for Gaskets (Metallic Seals)
• SAE AMS7270A-1952 RINGS, SEALING, SYNTHETIC RUBBER Fuel Resistant (65-75)
• SAE AMS7270C-1956 RINGS, SEALING, SYNTHETIC RUBBER Fuel Resistant (65-75)
• SAE MA2039-1986 PLUG, MJ THREAD, O-RING SEAL, AMS 5640
• SAE AMS7270B-1954 RINGS, SEALING, SYNTHETIC RUBBER Fuel Resistant (65-75)
• SAE AS5857-2005 Gland Design, O-ring and Other Elastomeric Seals, Static Applications
• SAE MA3442-1987 Packing, Preformed - O-Ring Seal, AMS 7267, Metric FSC 5330
• SAE AS4716D-2021 Gland Design, O-Ring and Other Seals
• SAE MA3434-2012 PACKING, PREFORMED - O-RING SEAL, AMS 7273, METRIC

International Organization for Standardization (ISO)

• ISO 3601-4:2008 Fluid power systems - O-rings - Part 4: Anti-extrusion rings (back-up rings)
• ISO 4633:2015 Rubber seals - Joint rings for water supply, drainage and sewerage pipelines - Specification for materials
• ISO 4633:2002 Rubber seals - Joint rings for water supply, drainage and sewerage pipelines - Specification for materials
• ISO 3603:1977 Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints; Pressure test for leakproofness

Korean Agency for Technology and Standards (KATS)

• KS K 9323-2008 Double flange rings(Reversible type)
• KS K 9323-1983 Double flange rings(Reversible type)
• KS K 9322-1985 Porous sintered metal single flange rings
• KS K 9322-2000 Porous sintered metal single flange rings
• KS R 2026-2007 Tyre valve core housing and spuds for automobiles
• KS W ISO 1749-2016 Aircraft－Elastomeric sealing rings－Packaging and identification
• KS W ISO 1749-2009(2014) Aircraft－Elastomeric sealing rings－Packaging and identification
• KS R 2026-1982 Tyre valve core housing and spuds for automobiles
• KS M ISO 6448:2009 Rubber seals－Joint rings used for petroleum product supply pipes and fittings－Specification for material

IT-UNI

• UNI 2211-1954 Gaskets for bulkhead seal channels

RU-GOST R

• GOST 24191-1980 Packing hoop. Design

SAE - SAE International

• SAE J281-1980 CAST IRON SEALING RINGS
• SAE MA3434A-2019 Packing, Preformed - O-Ring Seal, AMS 7273, Metric
• SAE AS1097B-1994 SEAL RING@ 37° FLARED TUBE FITTING END
• SAE AMS7320E-2005 Rings@ Sealing@ Cast Leaded-Tin Bronze@ 80Cu - 16Sn - 5Pb As Cast
• SAE AS481-1957 "FLANGE PILOT-ACCESSORY@ 5""- 8-10"" BOLT CIRCLE"
• SAE AS83461/1A-2015 Packing, Preformed - M83461 O-Ring
• SAE AS9141A-2001 Gasket - Metal O-Ring, .035 Tube X .006 Wall, Cres - UNS S32100 FSC 5330
• SAE AS481B-1971 FLANGE PILOT-ACCESSORY@ O RING SEAL
• SAE AS3569-1995 Packing@ Preformed - O-Ring Seal AMS 7270
• SAE AS4318-1993 Adapter@ Flared Tube .375 Bulkhead to Boss@ for Seal Ring

CZ-CSN

• CSN 37 0189-1985 Sealing washers for electrical cablcs
• CSN ON 02 9310-1963 Seals for exhaust
• CSN 10 7255-1975 Vacuum technology. Rubber gasket rings

Aeronautical Radio Inc.

• ARINC 654 ITEM 8.0 Environmental Sealing Gaskets

Underwriters Laboratories (UL)

• UL 157-2015 UL Standard for Safety Gaskets and Seals
• UL 157-1996 UL Standard for Safety Gaskets and Seals Second Edition; Reprint with Revisions Through and Including March 12, 2007
• UL 157 BULLETIN-2009 UL Standard for Safety Gaskets and Seals
• UL 157 BULLETIN-2012 UL Standard for Safety Gaskets and Seals
• UL 157 BULLETIN-2015 UL Standard for Safety Gaskets and Seals

SCC

• DIN 470 E:2008 Draft Document - Sealing washers
• NS 173:1968 Sealing constructions for flanges — NP 10 — 100 — Sealing: O-ring
• HOLDEN HN 2419-2003 FKM ELASTOMER, O-RING SEAL
• BS 1806:1962 Specification for dimensions of toroidal sealing rings ('O' seals and their housings)
• DIN 65304:2019 Aerospace - Sealing ring - Technical specification
• ASD-STAN prEN 3376:1970 Limits of surface imperfections of elastomeric toroidal sealing rings (o-rings)
• BS 1806:1951 Specification for dimensions of toroidal sealing rings ('O' seals and their recommended housings)
• BS 6442:1984 Specification for limits of surface imperfections on elastomeric toroidal sealing rings ('O'-rings)
• DIN 65219:2019 Aerospace series - Sealing rings - Dimensions, masses
• DIN 87155 E:2014 Draft Document - Grey cast-iron coarse filters - Sealing rings

NO-SN

• NS 173-1968 Sealing constructions for flanges - NP 10 - 100 - Sealing: O-ring

American Society for Testing and Materials (ASTM)

• ASTM F112-00(2013) Standard Test Method for Sealability of Enveloped Gaskets
• ASTM F112-00e1 Standard Test Method for Sealability of Enveloped Gaskets
• ASTM F112-00(2019) Standard Test Method for Sealability of Enveloped Gaskets
• ASTM F112-00(2006) Standard Test Method for Sealability of Enveloped Gaskets

GM North America

• GM221M-2002 Grommets Underhood Revision A
• GM GM9909P-2004 Seals Abrasion Resistance
• GM 9985212-1980 Sealing Compound, Thread & Gasket, No. 3
• GM GMN8423-2003 Low Permeating Seals for Fuel Applications
• GM 9985269-1983 Sealing Compound, Thread and Gasket, Thixotropic

AIA/NAS - Aerospace Industries Association of America Inc.

• NAS1598-1997 Washer - Sealing (Rev 3)
• NAS1598-1977 Washer - Sealing (Rev 2)
• NAS1412-1988 Gasket@ Sealing@ Custom Design (Rev 2)
• NAS1412-2015 GASKET@ SEALING@ CUSTOM DESIGN (Rev 4)
• NASM82496-1998 Screws@ Machine@ Self-Sealing@ Integral O-Ring
• NAS1412-2011 GASKET@ SEALING@ CUSTOM DESIGN (Rev 3)

BR-ABNT

• ABNT P-PB-80-1968 Gasket, cast iron seal pipe

(U.S.) Ford Automotive Standards

• FORD ESW-M4G153-A-1988 SEALER, RUBBER BASE-FOR RADIAL OIL SEALS

Aerospace Industries Association

• AIA NAS 1598-1997 (Inactive)Washer - Sealing Rev. 3

IN-BIS

• IS 3175-1974 Specification for gaskets for pipe joints

U.S. Military Regulations and Norms

• ARMY MIL-O-70548-1986 OBTURATING BAND, PLASTIC SPLIT (MOLDED)
• ARMY MIL-O-70548 NOTICE 3-2009 OBURATING BAND, PLASTIC SPLIT (MOLDED)
• ARMY MIL-O-70548 REINST NOTICE 2-1997 OBTURATING BAND, PLASTIC SPLIT (MOLDED)
• ARMY MIL-O-71152 REINST NOTICE 2-1996 OBTURATING RING, PLASTIC SPLIT (MOLDED)
• ARMY MIL-O-71130-1992 OBTURATING BAND, PLASTIC SPLIT (MOLDED)
• ARMY MIL-O-70548 (6)-1997 OBTURATING BAND, PLASTIC SPLIT (MOLDED)
• ARMY MIL-O-71152-1993 OBTURATING RING, PLASTIC SPLIT (MOLDED)
• ARMY MIL-O-71130 REINST NOTICE 2-1996 OBTURATING BAND, PLASTIC SPLIT (MOLDED)
• ARMY MIL-HDBK-692 B-1983 GUIDE TO THE SELECTION OF RUBBER O-RINGS
• ARMY MIL-O-71152 (2)-2001 OBTURATING RING, PLASTIC SPLIT (MOLDED)

PL-PKN

• PN BN 2211-02-1962 Cylindrical equipment edge seals
• PN M73100-1966 Seal rings U and V form Specifica?ions
• PN M54901-05-1988 Jet water meter connection elements Packing washers

United States Navy

• NAVY MIL-PRF-17927 D-2004 GASKETS, FLAME RESISTANT HINGED CLOSURE
• NAVY MS22048 REV A VALID NOTICE 1-1991 GROMMET AND WASHER, PARACHUTE PACK
• NAVY MS22048 REV A-1961 GROMMET AND WASHER, PARACHUTE PACK
• NAVY MIL-G-21569 B VALID NOTICE 1-1989 GASKETS, CYLINDER LINER SEAL, SYNTHETIC RUBBER
• NAVY MIL-G-21569 B-1965 GASKETS, CYLINDER LINER SEAL, SYNTHETIC RUBBER
• NAVY QPL-6183-12 NOTICE-1963 GASKETS AND SHEET GASKET MATERIAL; SYNTHETIC RUBBER AND CORK COMPOSITION

Danish Standards Foundation

• DS/INSTA 219:1990 Plastics pipes. Sealing rings of thermoplastic elastomers
• DS 521:1989 Rubber sealing rings for water and waste-water piping

AT-ON

• ONORM M 1900-1980 Sealing rings for screwed pipe ions and screw plugs

Standard Association of Australia （SAA）

• AS 1646:2007 Elastomeric seals for waterworks purposes
• AS B320:1972 Inch dimensions of toroidal sealing rings and their housings ('O' Rings)

YU-JUS

• JUS M.C4.505-1989 Pneumatic tubing. Gasket ring. Shape and dimensions
• JUS M.C4.500-1989 Pneumatic tubing. Gasket rings. Shape and dimensions
• JUS G.C2.202-1990 Rubber sealings - "(T-rings for tube mills for net grinding. Shape and dimensions
• JUS G.C2.201-1990 Rubber sealings for tube mills for net grluding. Sbape and dimensions

South African Bureau of Standard

• SANS 4633:2008 Rubber seals - Joint rings for water supply, drainage and sewerage pipelines - Specification for materials
• SANS 974-3:1976 Rubber joint rings (non-cellular) Part 3: Joint rings for use in pressure cookers

American National Standards Institute （ANSI)

• ANSI/ASTM E2750:2013 Guide for Extension of Data For Penetrations Seals

Indonesia Standards

• SNI 7655-2010 Rubber seal (rubber seal) on LPG valve
• SNI 06-1490-1989 Rubber seals for glass of motor vehicles

FI-SFS

• SFS 8453-1987 LAIVANRAKENNUS. LAIPPATIIVISTEET.RENGASTIIVISTEET

SE-SIS

• SIS SMS 2539-1968 Engineering drawing. Simplijied representation oj sealing rings

Spanish Association for Standardization (UNE)

• UNE 28564:1984 AIRCRAFT. ELASTOMERIC SEALING RINGS. PACKAGING AND IDENTIFICATION.

GSO

• OS GSO ISO 1749:2016 Aircraft -- Elastomeric sealing rings -- Packaging and identification
• BH GSO ISO 1749:2017 Aircraft -- Elastomeric sealing rings -- Packaging and identification
• GSO ISO 1749:2016 Aircraft -- Elastomeric sealing rings -- Packaging and identification

API - American Petroleum Institute

• API REPORT 90-21-1994 Sealability of API R@ RX@ & BX Ring Gaskets

Others: din sealing ring,din sealing ring,lip seal,aem sealing ring,sealing ring,Rotary seal,Seal material,Seal column,test seal,Seal analysis,Cylinder seal,seal ring english,sae sealing ring,Seal failure,Seal groove,Pneumatic seal,seal ring insulation,Cylinder seal,f sealing ring