GB/T 18375.2-2001 in English
SUPERSEDEDProsthetics - Structural testing of lower-limb prostheses - Part 2: Test samples
- Issued on:2001-05-02
- Implemented on:2001-12-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$117.00
| Standard No: | GB/T 18375.2-2001 |
| Document status: | SUPERSEDED |
| Superseded by: |
GB/T 18375-2024 Prosthetics—Structural testing of lower-limb prostheses—Requirements and test methods
|
| Superseded on: | 2025-03-01 |
| Title in English: | Prosthetics - Structural testing of lower-limb prostheses - Part 2: Test samples |
| Title in Chinese: | 假肢 下肢假肢的结构检验 第2部分：试验样品 |
| Language: | English |
| File Format: | Electronic (PDF) |
| Delivery: | Via email within 1~3 business days |
| Issued on: | 2001-05-02 |
| Implemented on: | 2001-12-01 |
| Professional Classification: | GB-National Standard |
| Related Keywords: | test sample
test samples scopegb/t test force test specimen composite test load |
| Related Topics: | Fake
test sample test sample test sample lower body Suction structure Counterfeit Double generation structure sample mechanical prosthesis Prosthetics mechanical prosthesis The internal structure of the sample divider Technical Analysis Assumptions sample part Pseudo-caking GB/T 18375.2 GB/T 18375.2-2001 Main structure of lower limb prosthesis |
《GB/T 18375.2-2001假肢 下肢假肢的结构检验 第2部分:试验样品》由TC148（全国残疾人康复和专用设备标准化技术委员会）归口，主管部门为民政部。
GB/T 18375描述了下肢假肢的静态和动态试验过程。在这个过程中，除了特殊情况，都是用一个试验力产生复合的试验载荷。在试验样品上的复合载荷取决于载荷各个分力的峰值，这些峰值通常发生在行走过程中支撑相时的不同瞬间。GB/T 18375描述的检验方法适用于小腿（BK）假肢、膝离断假肢和大腿（AK）假肢。GB/T 18375的本部分规定：试验样品的类型；试验样品的选择；试验样品的准备；试验样品的对线调整；责任。
Scope
GB/T 18375 describes the static and dynamic test procedures for lower limb prostheses. In this process, except for special cases, a test force is used to generate a composite test load. The compound load on the test specimen depends on the peak values of the individual components of the load, which usually occur at different instants during the stance phase during walking. The testing method described in GB/T 18375 is applicable to lower leg (BK) prostheses, knee amputated prostheses and thigh (AK) prostheses. Note: The inspection can be carried out on the whole structure, part of the structure or a single component. This part of GB/T 18375 stipulates - type of test sample; - selection of test sample; - preparation of test sample; - alignment adjustment of test sample; - responsibility.
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-
GB/Z 13672-2022 in English
Test method for scuffing load capacity of gears
2022-10-14 -
GB/T 20888.1-2020 in English
Machinery for forestry—Safety requirements and testing for pole-mounted powered pruners—Part 1:Machines fitted with an integral combustion engine
2020-04-28 -
GB/T 3837.2-1983 in English
Tenons for spindle noses with 7: 24 tapers
- -
GB/T 31467-2023 in English
Electrical performance test methods for Iithium-ion traction battery pack and system of electric vehicles
2023-11-27 -
GB/T 5914.1-2015 in English
Drivers cab for locomotives―Part 1:Visibility conditions
2015-12-31 -
GB 10551-1989 in English
Photographic grade sodium thiosulfate, crystilline
1989-12-01 -
GB 4495-1984 in English
Cellular material for rubber-plastics shoes--Determination of compression set
- -
GB/T 20919-2018 in English
External micrometer with electronic digital display
2018-05-14 -
GB/T 16157-1996/XG1-2017 in English
The determination of particulates and sampling methods of gaseous pollutants emitted from exhaust gas of stationary source, includes Amendment 1
1996-01-12 -
GB 2595-1981 in English
Safety of chemical laboratories--Technical standards for conducting metallurgical analysis
-
