GB/T 217-2008 in English
VALIDDetermination of true relative density of coal
- Issued on:2008-07-29
- Implemented on:2009-05-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$97.00
《GB/T 217-2008煤的真相对密度测定方法》由TC42(全国煤炭标准化技术委员会)归口,TC42SC1(全国煤炭标准化技术委员会煤炭检测分会)执行,主管部门为中国煤炭工业协会。
本标准代替GB/T 217-1996《煤的真相对密度测定方法》。
本标准规定了煤的真相对密度测定的术语和定义、方法提要、试剂和材料、仪器设备、测定步骤、结果计算及精密度。
本标准适用于无烟煤、烟煤和褐煤。
本标准与GB/T 217-1996相比,主要变化为:
―――根据GB/T 1.1-2000《标准化工作导则 第1部分:标准的结构和编写规则》和GB/T 483-2007《煤质分析试验方法一般规定》修改了书写格式,增加了前言、术语和定义、试验报告。
―――修改了密度瓶图中的错误,即由原60mL改为50mL(原版5.4,本版6.3)。
Determination of true relative density of coal
1 Scope
This standard specifies the terms and definitions, method summary, reagents and materials, apparatuses, determination procedures, result calculation and precision for the determination of true relative density of coal.
This standard is applicable to anthracite, bituminous coal and lignite.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections) to, or revisions, of any of these publications do not apply to this standard. However parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition applies.
GB/T 212 Proximate analysis of coal (GB/T 212-2008, ISO 11722:1999, ISO 1171:1997, ISO 562:1998, NEQ)
3 Terms and definitions
For the purpose of this standard, the following terms and definitions apply.
3.1
true relative density of coal
ratio of the mass of coal (excluding pores in coal) to the mass of water of the same volume at 20℃
4 Method summary
Using sodium dodecyl sulfate solution as wetting agent, the coal sample is wetted and settled in a density bottle, and the adsorbed gas is removed. The true relative density of coal is calculated according to the mass of water of the same volume discharged from the coal sample.
5 Reagents and materials
Sodium dodecyl sulfate solution: chemically pure, 20g/L. Weigh 20g of sodium dodecyl sulfate, dissolve it in water, and then dilute the solution to 1L with water.
Foreword I
1 Scope
2 Normative references
3 Terms and definitions
4 Method summary
5 Reagents and materials
6 Apparatuses
7 Determination procedures
8 Result calculation
9 Method precision
10 Test report

Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-

GB/T 5447-2014 in English
Determination of caking index for bituminous coal
2014-06-09 -

GB/T 6949-2010 in English
Determination of apparent relative density of coal
2011-01-01 -

GB/T 16415-2008 in English
Determination of selenium in coal - Hydride generation-atomic absorption method
2008-07-29 -

GB/T 19560-2025 in English
Experimental method of high-pressure isothermal adsorption to coal
2025-08-01 -

GB/T 34230-2017 in English
Test method of leaching for coal and coal refuse
2017-09-07 -

GB/T 3558-2014 in English
Determination of chlorine in coal
2014-06-09 -

GB/T 212-2008 in English
Proximate analysis of coal
2008-07-29 -

GB/T 18510-2001 in English
Guidelines for the validation of alternative methods of analysis for coal and coke
2001-11-12 -

GB/T 11957-2001 in English
Determination of yield of humic acids in coal
2001-11-12 -

GB/T 43218-2023 in English
Guidance for performance acceptance of determinator of total sulfur in coal
2023-09-07