Vacuum Density Meter

Vacuum Density Meter, Total:350 items.

The international standard classification for "Vacuum Density Meter" includes: Power stations in general , Radiation measurements , Chemical laboratories. Laboratory equipment , Vacuum technology , Conducting materials , Iron ores , Insulating fluids , Nuclear energy engineering , Solid fuels , Coals , Refractories , Glass in general , Organic chemicals , Plastics in general , Chemical analysis of metals , Fluid storage devices , Diagnostic equipment , Tobacco, tobacco products and related equipment , Mining and quarrying , Exploratory and extraction equipment , Equipment for petroleum and natural gas industries , Components for aerospace construction , Ceramics in general , Other textile machinery .

The Chinese standard classification for "Vacuum Density Meter" includes: Electric power testing technique , Radio Measurement , Time and Frequency Measurement , Ionizating Radiation Measurement , Electrochemical, thermochemistry and optical profile type analyzer , Technical management , Technical Management , Vacuum technique and equipment , Carbon material , Electronic measurement and equipment in general , Iron ore , Coal analysis methods , Coke , Fireproof material in general , Carbon material in general , Ceramic and glass in general , Coal tar processed products , Masonry product , Basic standards and general methods for synthetic resin and plastic , Metal physical property test method , Pressure vessel , Solid fuel ore in general , Hygiene, safety and labor protection , Petroleum coke , Operating equipment, instrument and meter , Medical ultrasound, laser, high-frequency instrument and equipment , Tobacco curing in general , Petroleum exploration logging equipment and instrument , Petroleum exploration, development, gathering and transportation equipment in general , Pipe fittings, clamps and seals , Daily use glass, ceramic, enamel and plastic products in general , Textile testing instrument .

Professional Standard - Energy and Power Planning

DL/T 1290-2013 Test Methods for Vacuum Tightness of Direct Air-cooled Unit
DL/T 846.9-2004 General technical specifications for high voltage test equipments Part 9: Vacuum interrupter detector

National Metrological Verification Regulations of the People's Republic of China

JJG(建材) 137-1999 sink-float comparative density meter
JJG 802-2019 Distortion Meter Calibrators
JJG 251-1997 Distortion Meter Calibrator
JJG(机械) 75-1992 Verification Regulations for Current Density Tester
JJG 1050-2009 X、gamma-ray Densitometry for Bone Mineral Density
JJG(铁道) 128-1991 Verification Regulations for Nucleon Humidity and Density Tester (Trial)
JJG(交通) 068-2006 Verification Regulation of Nuclear Density and Moisture Gage
JJG 141-2017 Asphalt pavement non-nuclear density meter
JJG 802-1993 Distortion Meter Calibrator
JJG(地质) 1021-1994 Verification Regulations for Relative Density Meter

Taiwan Provincial Standard of the People's Republic of China

CNS 11121-1984 Method for Determination of True Relative Density, Apparent Relative Density and Porosity of Coke
CNS 620-1998 Method for determination of true density of refractory materials

Group Standards of the People's Republic of China

T/CIMA 0044-2023 Cyanobacteria density online monitor
T/CPF 0083-2024 Test method for tightness of flexible packaging—Vacuum decay method
T/CNCA 063-2024 Determination of true density of coal - Helium displacement method
T/HBJLXH 001-2022 Calibration Method of Rolling Forming Machine
T/SXCIES 003-2023 Determination of true relative density of coal ash and slag
T/GXAS 010-2018 Determination of Density and Relative Density of Gum Turpentine by Densitometer Method

Professional Standard - Electron

SJ/T 10230-1991 Low distortion meter for Type ZN4112
SJ/T 10161.5-1991 Vacuum rubber seal plane flanges - Dimensions of retaining rings
SJ/T 10943-2020 Test method for granulometric distribution of alundum powder for vacuum tubes-Density balance method
SJ/T 10161.6-1991 Vacuum rubber seal plane flanges - Dimensions of carriers
SJ/T 10161.8-1991 Vacuum rubber seal plane flanges - Dimensions of clamping screws
SJ/T 10943-1996 Test method for granulometric distribution of alundum powder for vacuum tubes - Density balance method
SJ/T 10161.4-1991 Vacuum rubber seal plane flanges - Dimensions of rotable flanges
SJ 1771-1981 Metallic bell cover for vacuum equipment--Sealing collar
SJ/T 10161.2-1991 Vacuum rubber seal plane flanges - Dimensions of fixed flanges
SJ/T 10161.3-1991 Vacuum rubber seal plane flanges - Dimensions of champing flanges
SJ/T 10161.7-1991 Vacuum rubber seal plane flanges - Dimensions of O rubber sealing rings

Professional Standard - Machinery

JB/T 1092-1991 Type and Size of Vacuum Rubber O-sealing Ring
JB/T 8105.2-1999 Metal seal connections of vacuum gauges
JB/T 8105.1-2015 Vacuum technology-Connector of vacuum gages 一Part 1:Rubber seal
JB/T 10463-2004 Ferrofluid vacuum rotary feedthroughs
JB/T 1090-1991 0
JB/T 1246-2007 Vacuum technology-Rotary plunger vacuum pump
JB 1092-1991 O-type vacuum rubber sealing ring type and size
JB/T 8105.1-1999 Rubber seal connections of vacuum gauges
JB/T 8105.2-2015 Vacuum technology.Connector of vacuum gauges.Part 2: Metal seal
JB/T 10463-2016 Ferrofluid vacuum rotary feedthroughs
JB/T 1090-2018 Vacuum technology-J-vacuum rubber ring gasket-Type and dimension
JB/T 5278.3-1991 Copper Wire Seal Can Be Baked Vacuum Flange Copper Wire Sealing Ring Structure Size?
JB/T 1246-2019 Vacuum technology-Rotary plunger vacuum pump
JB/T 1091-2018 Vacuum technology-JO and skeletion-vacuum rubber ring gasket-Type and dimension
JB/T 1092-2018 Vacuum technology-O-vacuum rubber ring gasket-Type and dimension
JB/T 5278.1-1991 Copper Wire Seal Can Be Baked Vacuum Flange Connection Type?

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 40333-2021 Vacuum gauges—Definitions and specifications for quadrupole mass spectrometers
GB/T 6155-1985 Carbon materials--Determination of the true density
GB/T 15472-1995 Generic specification and test method for distortion meters
GB/T 24203-2024 Method for determination of bulk density, true density, true porosity and oppen porosity of carbon materials
GB/T 6155-2008 Carbon materials-determination of the true density or porosity
GB/T 217-1996 Determination of true relative density of coal
GB/T 15472-2012 General specification for distortion measure instrument
GB/T 9966.3-2001 Test methods for natural facing stones-Part 3:Test methods for bulk density,true density,true porosity and water absorption
GB/T 24586-2009 Iron ores—Determination of apparent density,true density and porosity
GB/T 18443.2-2010 Testing method of performance for vacuum insulation cryogenic equipment—Part 2:Vacuum degree measurement
GB 6308.1-1986 Rubber seal connections of vacuum gauges
GB/T 5071-1997 Refractory materials - Determination of true density
GB/T 8330-2008 Determination of specific gravity of ion exchange resins in wet state
GB/T 5071-2013 Refractory materials—Determination of true density
GB/T 4511.4-1984 Coke--Determination of true relative density
GB/T 43916-2024 Vacuum technology—Vacuum gauges—Specifications, calibration and measurement uncertainties for capacitance diaphragm gauges
GB/T 28786-2012 Vacuum technology - Methods of bonding strength measurement for vacuum coating film - Measuring adhesion by tape test
GB/T 9966.3-2020 Test methods for natural stone—Part 3:Determination of water absorption,bulk density,true density and true porosity
GB/Z 42625-2023 Vacuum technology—Vacuum gauges—Characterization of quadrupole mass spectrometers for partial pressure measurement
GB/T 32062-2015 In-situ test method for degradation ratio of vacuum degree of vacuum glazing―Photoelastic method
GB 6308.2-1986 Metal seal connections of vacuum gauges
GB/T 41485-2022 Nuclear instrumentation—Geophysical borehole instrumentation to determine rock density
GB/T 4511.1-2008 Coke - Determination of true relative density apparent relative density and porosity
GB/T 8330-1987 Method for the determination of true density of ion exchange resins in wet state
GB/T 217-2008 Determination of true relative density of coal
GB/T 4193-1984 Method for measuring the density of the fine wire and ribbon of tungsten and molybdenum used in electric light sources and vacuum tubes
GB 9658-1988 Transparent quartz glass tubes for light sources and vacuum instrument
GB/T 34876-2017 Vacuum technology-Vacuum gauges-Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge
GB/T 18193-2000 Vacuum technology - Mass-spectrometer-type leak detector calibration
GB/T 24203-2009 Carbon materials—Determination of the true density or true poroous—Boiling method

National Metrological Technical Specifications of the People's Republic of China

JJF(电子) 10-1982 Verification method of BO-5 distortion meter verification device
JJF 1852-2020 Calibration Specification for Distortion Meters
JJF(机械) 026-2008 Calibration specification for current density tester
JJF 1649-2017 Calibration Specification for Ultrasound Bone Sonometers

Professional Standard - Coal

MT/T 39-1987 Method for Determination of True Density of Rock
MT/T 713-1997 Determination of true density for mine dust
MT 39-1987 Determination Methods for Rock Actual Density

Professional Standard - Petrochemical Industry

SH/T 0033-1990 Determination method for actual density of petroleum coke

Professional Standard - Traffic

JT/T 1169-2017 Vacuum sealing device for porous asphalt mixture
JT/T 1171-2017 Non-nuclear density gauge for asphalt pavement
JT/T 658-2006 Nuclear density and moisture gauge

Professional Standard - Medicine

YY 0774-2010 Ultrasound bone sonometers
YY/T 0774-2019 Ultrasound bone sonometers

Professional Standard - Tobacco

YC/T 473-2013 Determination of apparent density,true density and inner pore volume of cut tobacco

Professional Standard - Petroleum

SY/T 6182-1996 Production Profile Logging Tool Calibration Procedure Fluid Density Logging Tool
SY/T 6579-2003 The calibration method for density tool
SY/T 6758-2009 Calibration method of lithological density log tool
SY/T 6582.3-2003 The Calibration for petroleum nuclear logging tool - Part 3: The calibration for compensated density/litho-density tool

Professional Standard - Aerospace

QJ 2965-1997 Specification for FluoroRubber Sealed Ultrahigh Vacuum Flange

Professional Standard - Light Industry

QB/T 1010-2015 Test method for true density of ceramic material and pigment
QB/T 1010-1999 Actual Density Determination of Ceramic Material and Pigment
QB 1010-1991 Method for determination of true density of pigments for daily ceramic materials

Professional Standard - Textile

FZ/T 98004-2008 Textile fiber linear density meter vibrating method

Military Standard of the People's Republic of China-General Armament Department

GJB/J 5230-2003 Calibration procedures for smoke density tester
GJB 9582-2018 Specification for Au/Ag composite sealing plugs for high vacuum
GJB 144A-2020 Optical fiber panel vacuum air tightness inspection method
GJB/J 3349-1998 Calibration procedures for vacuum stability testers for explosives
GJB 144-1986 Optical fiber panel vacuum air tightness inspection method
GJB 3349A-2019 Verification regulation for vacuum stability test apparatus of propellants and explosives

Professional Standard - Automobile

QC/T 29089-2016 PVC/ABS vacuum forming skin for automotive instrument panel

Professional Standard - Radio Television Film

GY/T 263-2012 Technical requirements for loudness and true-peak indicating meters

Professional Standard - Building Materials

JC/T 756-1988 Transparent quartz glass tubes for light sources and vacuum instrument
JC/T 598-1995 Transparent quartz glass tubes for electric light sources and electric vacuum instruments

Professional Standard - Chemical Industry

HG/T 2046-1991 Specifications for vacuum fused rings for mechanical seals

Professional Standard - Ferrous Metallurgy

YB/T 6194-2024 Measurement of True Density of Needle Coke by Kerosene Displacement Method

Professional Standard - Commodity Inspection

SN/T 0482-1995 High-speed determination of true relative density apparent relative density and porosity of coke for export

Professional Standard - Nuclear Industry

EJ/T 904-1994 Single Photon Bone Mineral Densitometer

Professional Standard - Archives

DA/T 60-2017 Technical requirements for vacuum-filled nitrogen-filled sealed packaging for paper archives

工业和信息化部

JBT1246-2019 Vacuum technology slide valve vacuum pump

Japanese Industrial Standards Committee (JISC)

JIS Z 8128:1983 Vacuum technology -- Vocabulary (vacuum gavges and related terms)
JIS Z 8754:1999 Vacuum technology -- Mass-spectrometer-type leak-detector calibration
JIS Z 8129:2014 Vacuum technology -- Vacuum gauges -- Specifications for hot cathode ionization gauges

Korean Agency for Technology and Standards (KATS)

KS B ISO 3530-2002(2012) Vacuum technology－Mass－spectrometer－type leak－detector calibration
KS B ISO 3530-2013 Vacuum technology－Mass－spectrometer－type leak－detector calibration
KS B ISO 3530:2002 Vacuum technology-Mass-spectrometer-type leak-detector calibration
KS B ISO 3530:2013 Vacuum technology－Mass－spectrometer－type leak－detector calibration
KS F 2495-2017 Testing method for maximum specific gravity and density of asphalt mixtures using automatic vacuum sealing method
KS F 2496-2012 Testing method for bulk specific gravity and density of compacted asphalt mixtures using automatic vacuum sealing method
KS F 2495-2012 Testing method for maximum specific gravity and density of asphalt mixtures using automatic vacuum sealing method
KS F 2495-2022 Testing method for maximum specific gravity and density of asphalt mixtures using automatic vacuum sealing method
KS A 0081-1989 Measuring methods of low pressures by discharge and ionization vacuum gauges
KS F 2495-2017(2022) Testing method for maximum specific gravity and density of asphalt mixtures using automatic vacuum sealing method
KS E ISO 5072-2009(2024) Brown coals and lignites－Determination of true relative density and apparent relative density
KS E ISO 5072-2019 Brown coals and lignites－Determination of true relative density and apparent relative density
KS F 2496-2022 Testing method for bulk specific gravity and density of compacted asphalt mixtures using automatic vacuum sealing method
KS E ISO 1014-2002(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
KS E ISO 5072-2009(2019) Brown coals and lignites－Determination of true relative density and apparent relative density
KS F 2496-2017 Testing method for bulk specific gravity and density of compacted asphalt mixtures using automatic vacuum sealing method
KS E ISO 1014-2022 Coke — Determination of true relative density, apparent relative density and porosity
KS E ISO 1014:2022 Coke — Determination of true relative density, apparent relative density and porosity
KS E ISO 1014:2002 Coke-Determination of true relative density, apparent relative density and porosity
KS A 3010-1986 Glossary of terms used in instrumentation Accuracy and precision
KS F 2496-2017(2022) Testing method for bulk specific gravity and density of compacted asphalt mixtures using automatic vacuum sealing method
KS A 0506-3-2002 Methods of calibration for viscosity gauge

Ente Nazionale Italiano di Unificazione

UNI 9544:1990 Pressure and vacuum gauges. Safety cryteria.
UNI EN ISO 9100-7:2005 Glass containers - Vacuum lug finishes - Part 7: 58 deep
UNI 8293:1987 Pressure and vacuum gauges. Grades of accuracy.
UNI 9764:1991 Pressure and vacuum gauges with diaphrag in elastic element. Construction characteristics.
CNR UNI 10010:1964 Soil Tests - Real Specific Gravity of a Soil
UNI EN 15103:2010 Solid biofuels - Determination of bulk density
UNI EN 1936:2001 Natural stone test method - Determination of real density and apparent density, and of total and open porosity
UNI EN ISO 15212-1:2000 Oscillation-type density meters - Laboratory instruments.
UNI 8540:1983 Pressure and vacuum gauges with spring elastic element. Additional characteristics for liquid filled gauges and liquid filled gauges in all stainless steel construction.
UNI EN 1936:2007 Natural stone test methods - Determination of real density and apparent density, and of total and open porosity
UNI 4663:1981 Pressure and vacuum gauges. Graduations and numerals.
UNI ISO 24477:2023 Vacuum technology - Vacuum gauges - Specifications, calibration and measurement uncertainties for spinning rotor gauges

British Standards Institution (BSI)

21/30426752 DC BS ISO 24477. Vacuum technology. Vacuum gauges. Specifications, calibration and measurement uncertainties for spinning rotor gauges
BS ISO 27895:2009 Vacuum technology - Valves - Leak test
BS PD ISO/TS 20175:2018 Vacuum technology. Vacuum gauges. Characterization of quadrupole mass spectrometers for partial pressure measurement
PD ISO/TS 20175:2018 Vacuum technology. Vacuum gauges. Characterization of quadrupole mass spectrometers for partial pressure measurement
BS ISO 27895:2010 Vacuum technology. Valves. Leak test
BS ISO 1014-2:2025 Coke - Determination of true relative density
BS ISO 5072:2021 Brown coals and lignites. Determination of true relative density and apparent relative density
BS ISO 1014:2021 Coke. Determination of true relative density, apparent relative density and porosity
BS EN 993-17:1999(2010) Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum
BS ISO 14291:2012 Vacuum gauges. Definitions and specifications for quadrupole mass spectrometers
BS EN 993-18:2002 Methods of test for dense shaped refractory products - Determination of bulk density of granular materials by the water method with vacuum
BS ISO 24477:2022 Vacuum technology.Vacuum gauges.Specifications, calibration and measurement uncertainties for spinning rotor gauges
BS ISO 5072:2013 Brown coals and lignites. Determination of true relative density and apparent relative density
BS EN 993-17:1999 Methods of test for dense shaped refractory products - Determination of bulk density of granular materials by the mercury method with vacuum
21/30423448 DC BS ISO 1014. Coke. Determination of true relative density, apparent relative density and porosity
24/30490989 DC BS IEC 61874 Nuclear instrumentation - Geophysical borehole instrumentation to determine rock density ('density logging')
BS EN 993-2:1995 Methods of test for dense shaped refractory products. Determination of true density
BS 3636:1963 Methods for proving the gas tightness of vacuum or pressurized plant
BS EN ISO 15212-1:1999 Oscillation-type density meters — Part 1: Laboratory instruments
PD ISO/TS 6737:2023 Vacuum technology. Vacuum gauges. Characteristics for a stable ionisation vacuum gauge
BS ISO 19685:2017 Vacuum technology. Vacuum gauges. Specifications, calibration and measurement uncertainties for Pirani gauges
BS PD ISO/TS 6737:2023 Vacuum technology. Vacuum gauges. Characteristics for a stable ionisation vacuum gauge
BS ISO 24477:2025 Vacuum technology. Vacuum gauges. Specifications, calibration and measurement uncertainties for spinning rotor gauges
BS ISO 3567:2011 Vacuum gauges. Calibration by direct comparison with a reference gauge

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 3530:2016 Vacuum technology -- Mass-spectrometer-type leak-detector calibration
BH GSO ISO 5072:2016 Brown coals and lignites - Determination of true relative density and apparent relative density
BH GSO ISO 20146:2022 Vacuum technology — Vacuum gauges — Specifications, calibration and measurement uncertainties for capacitance diaphragm gauges
BH GSO IEC 61874:2016 Nuclear instrumentation - Geophysical borehole instrumentation to determine rock density ('density logging')
BH GSO ISO 14291:2017 Vacuum gauges -- Definitions and specifications for quadrupole mass spectrometers

GCC Standardization Organization

GSO ISO 3530:2013 Vacuum technology -- Mass-spectrometer-type leak-detector calibration
GSO ISO 5018:2017 Refractory materials -- Determination of true density
GSO ISO 20146:2021 Vacuum technology — Vacuum gauges — Specifications, calibration and measurement uncertainties for capacitance diaphragm gauges
GSO IEC 61874:2015 Nuclear instrumentation - Geophysical borehole instrumentation to determine rock density ('density logging')
GSO ISO 1014:2013 Coke - Determination of true relative density, apparent relative density and porosity
GSO ISO 5072:2013 Brown coals and lignites - Determination of true relative density and apparent relative density
GSO ISO 14291:2015 Vacuum gauges -- Definitions and specifications for quadrupole mass spectrometers
GSO ISO 4373:2024 Hydrometry — Water level measuring devices
GSO ISO 24477:2024 Vacuum technology — Vacuum gauges — Specifications, calibration and measurement uncertainties for spinning rotor gauges

International Organization for Standardization (ISO)

ISO 3530:1979 Vacuum technology; Mass-spectrometer-type leak-detector calibration
ISO/TS 20175:2018 Vacuum technology - Vacuum gauges - Characterization of quadrupole mass spectrometers for partial pressure measurement
ISO 27895:2009 Vacuum technology - Valves - Leak test
ISO 19685:2017 Vacuum technology - Vacuum gauges - Specifications, calibration and measurement uncertainties for Pirani gauges
ISO 14291:2012 Vacuum gauges - Definitions and specifications for quadrupole mass spectrometers
ISO 5072:2021 Brown coals and lignites — Determination of true relative density and apparent relative density
ISO 1014:1975 Coke — Determination of true relative density, apparent relative density and porosity
ISO 1014:1985 Coke; Determination of true relative density, apparent relative density and porosity
ISO 1014:2021 Coke — Determination of true relative density, apparent relative density and porosity
ISO 1014:1985/Cor 1:1994 Coke - Determination of true relative density, apparent relative density and porosity; Technical Corrigendum 1
ISO 24477:2025 Vacuum technology — Vacuum gauges — Specifications, calibration and measurement uncertainties for spinning rotor gauges
ISO 24477:2022 Vacuum technology — Vacuum gauges — Specifications, calibration and measurement uncertainties for spinning rotor gauges
ISO/DTS 6737:2023 Vacuum technology — Vacuum gauges — Characteristics for a stable ionisation vacuum gauge
ISO 20146:2019 Vacuum technology — Vacuum gauges — Specifications, calibration and measurement uncertainties for capacitance diaphragm gauges
ISO/CD TS 6737 Vacuum technology — Vacuum gauges — Characteristics for a stable ionisation vacuum gauge
ISO 27894:2009 Vacuum technology - Vacuum gauges - Specifications for hot cathode ionization gauges

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 3530:2013 Vacuum technology -- Mass-spectrometer-type leak-detector calibration
OS GSO ISO 5018:2017 Refractory materials -- Determination of true density
OS GSO ISO 5072:2013 Brown coals and lignites - Determination of true relative density and apparent relative density
OS GSO ISO 14291:2015 Vacuum gauges -- Definitions and specifications for quadrupole mass spectrometers
OS GSO OIML R101:2002 INDICATING AND RECORDING PRESSURE GAUGES, VACUUM GAUGES AND PRESSURE –VACUUM GAUGES WITH ELASTIC SENSING ELEMENTS (ORDINARY INSTRUMENTS)

American Society for Testing and Materials (ASTM)

ASTM D2840-69 Method of Test for Average True Particle Density of Hollow Microspheres
ASTM D6752/D6752M-25 Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
ASTM D6857/D6857M-25 Standard Test Method for Maximum Specific Gravity and Density of Asphalt Mixtures Using Automatic Vacuum Sealing Method
ASTM RR-D04-1020 2003 D6752/D6752M-Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
ASTM D6857/D6857M-23 Standard Test Method for Maximum Specific Gravity and Density of Asphalt Mixtures Using Automatic Vacuum Sealing Method
ASTM D5002-99(2005) Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM D5002-99 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM D5002-15 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM D5002-99(2010) Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM D6857-09 Standard Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method
ASTM D6752/D6752M-11 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM D6857-03 Standard Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method
ASTM D6857/D6857M-11 Standard Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method
ASTM D6857/D6857M-17 Standard Test Method for Maximum Specific Gravity and Density of Asphalt Mixtures Using Automatic Vacuum Sealing Method
ASTM D5002-16 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM D5002-13 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM D6857/D6857M-18 Standard Test Method for Maximum Specific Gravity and Density of Asphalt Mixtures Using Automatic Vacuum Sealing Method
ASTM D6752/D6752M-23 Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
ASTM D6752/D6752M-17 Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
ASTM D6752-02a Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM D6752-02 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM D6752/D6752M-18 Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
ASTM D5002-22 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM D5002-19 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM D5002-18e1 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM D6752-09 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM D6752-03e1 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM D5002-18 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM D6752-03 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method

IT-UNI

UNI 4662-1961 Pressure gauge, vacuum gauge and vacuum pressure gauge. Eccentric scale pressure gauges, vacuum gauges and dials for vacuum pressure gauges
UNI 4661-1961 Pressure gauge, vacuum gauge and vacuum pressure gauge. Dials for concentrically graduated pressure gauges, vacuum gauges and vacuum manometers
UNI 4663-1961 Pressure gauge, vacuum gauge and vacuum pressure gauge. The scale of the dial
UNI ISO/TS 20175:2020 Vacuum technology - Vacuum gauges - Characterization of quadrupole mass spectrometers for partial pressure measurement
UNI 4664-1961 Pressure gauge, vacuum gauge and vacuum pressure gauge. Concentric scale pressure gauges, vacuum gauges and pointers of vacuum manometers
UNI ISO 19685:2020 Vacuum technology -- Vacuum gauges -- Specifications, calibration and measurement uncertainties for Pirani gauges
UNI ISO 20146:2020 Vacuum technology -- Vacuum gauges -- Specifications, calibration and measurement uncertainties for capacitance diaphragm gauges
UNI ISO 14291:2020 Vacuum gauges -- Definitions and specifications for quadrupole mass spectrometers
UNI 4660-1961 Pressure gauge, vacuum gauge and vacuum pressure gauge. Concentric scale pressure gauge, vacuum gauge and vacuum pressure gauge. Sleeve diameters are 80 and 250mm
UNI 4668-1961 Pressure gauge, vacuum gauge and vacuum pressure gauge. PN 16 gas connection cock with 1/s for inspection and control instruments
UNI 4659-1961 Pressure gauge, vacuum gauge and vacuum pressure gauge. Eccentric scale pressure gauge and vacuum gauge. Sleeve diameter 50 and 63mm' type
UNI 4658-1961 Pressure gauge, vacuum gauge and vacuum pressure gauge. Concentric scale pressure gauge and vacuum gauge. Sleeve diameters are 50 and 63mm

RO-ASRO

STAS 4384-1968 An instrument for measuring density. Breast density meter
STAS 3589/3-1986 INDICATING PRESSURE GAU- GES, VACUUM GAUGES AND PRE- SURE VACUUM GAUGES WITH ELASTIC .ELEMENT Dials, scales, graphical symbols

South African Bureau of Standard

SANS 5072:2005 Brown coals and lignites - Determination of true relative density and apparent relative density
SANS 1014:1985 Coke - Determination of true relative density, apparent relative density and porosity
SANS 5901:1978 True relative density of refractory materials (Pycnometer method)
SANS 982:1990 High-pressure high-vacuum steam sterilizers (autoclaves)

German Institute for Standardization

DIN 12545:1977 Laboratory glassware; vacuum stopcocks
DIN 28411:1976-03 Vacuum technology; acceptance specifications for mass spectrometer-type leak-detector, terms
DIN 28418-2:1978 Vakuum technology; standard method for vacuum gauge calibration by direct comparison with a reference vaccum gauge, ionization vacuum gauge
DIN 12492:1998 Laboratory glassware - Instruments with vacuum-jacket insulation
DIN EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum; German version EN 993-18:2002
DIN EN 993-17:1999-01 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vakuum; German version EN 993-17:1998
DIN 58512:1994-07 Divider points for precision drawing instruments (P)
DIN 28426-1:1983-08 Vacuum technology; acceptance specifications for rotary plunger vacuum pumps, sliding vane rotary vacuum pumps and rotary piston vacuum pumps for the ranges of rough and medium vacuum
DIN 28411:1976 Vacuum technology; acceptance specifications for mass spectrometer-type leak-detector, terms

CZ-CSN

CSN 10 7255-1975 Vacuum technology. Rubber gasket rings
CSN ISO 5018:1994 Refractory materials.Determination of true density
CSN 44 1322 ZZ1-2001 Solid fuel. Determination of true density
CSN 44 1322-1993 Solid minerál fuels. Determination of true relatíve density
CSN ON 42 8432-1962 Precision Nickel Alloy Round Wire (Vacuum Technology) Specifications

GM Holden Ltd

HOLDEN HN 1082-2009 INSTRUMENT PANEL PAD ASSEMBLIES VACUUM FORMED
HOLDEN HN 1016-2001 Lubricant - Vacuum Servo Brake Leather Seals

GOST

GOST R 71639-2024 Vacuum-tigh tceramics. Test method for linear thermal expansion coefficient

Association Francaise de Normalisation

NF M03-039*NF ISO 1014:2004 Coke - Determination of true relative density, apparent relative density and porosity.
NF X10-530:1975 Vacuum technology - Mass spectrometer-type leak-detector calibration.
NF M03-039:1982 SOLID FUELS. COKE. DETERMINATION OF TRUE RELATIVE DENSITY,APPARENT RELATIVE DENSITY AND POROSITY.
NF M01-018*NF ISO 5072:2013 Brown coals and lignites - Determination of true relative density and apparent relative density
NF B40-339*NF EN 993-17:1999 Methods of test for dense shaped refractory products. Part 17 : determination of bulk density of granular materials by the mercury method with vacuum.
NF EN 993-18:2002 Test methods for dense shaped refractory products - Part 18: determination of the apparent density of granular materials by the vacuum water method
NF EN 993-17:1999 Test methods for dense shaped refractory products - Part 17: determination of the apparent density of granular materials by the vacuum mercury method
NF ISO 27893:2013 Vacuum technique - Vacuum pressure gauges - Evaluation of the uncertainty of calibration results by direct comparison with a reference pressure gauge
NF X10-515:1971 Vacuum technology. Vapour vacuum pumps. Measurement of the volume rate of flow (pumping speed).
NF B40-340*NF EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18 : determination of bulk density of granular materials by the water method with vacuum

Gosstandart of Russia

GOST 2160-2015 Solid mineral fuel. Determination of true and apparent density
GOST 8066-1977 Black powders. Real density determination method
GOST R 70658-2023 Vacuum-tight ceramics. Terms and definitions
GOST 2182-1975 Electric vacuum devices. Anode and filament voltage
GOST R 70659-2023 Vacuum-tight ceramics. Classification and system of designations
GOST R 70544-2022 Coke. Methods for the determination of true relative density, apparent relative density and porosity
GOST ISO 5017-2014 Dense shaped refractory products. Determination of bulk density, apparent porosity and true porosity
GOST 34348-2017 Vacuum technology. Vacuum gauges. Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge
GOST 22091.14-1986 X-ray devices. The method of measuring the energy flow density (photon flux density) of X-radiation
GOST 15177-1970 Transparent silica glass tubes for light sources

Lithuanian Standards Office

LST ISO 5018:1998 Refractory materials. Determination of true density
LST EN 993-18-2003 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum
LST EN 993-17-2001 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum

Society of Automotive Engineers (SAE)

SAE AIR4394A-2020 Vacuum Investment Cast PH13-8Mo Corrosion Resistant Steel
SAE AMS7269C Rubber: Silicone Rubber (PVMQ), Low Outgassing, Low Temperature Resistant 45 - 55 Shore “A” Hardness for Seals in Space and Vacuum Service
SAE AMS5401C-2018 Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 62Ni - 21.5Cr - 9.0Mo - 3.6Cb (Nb) Vacuum Melted, Vacuum Cast As Cast
SAE AMS7269C-2019 RINGS, SEALING, SILICONE RUBBER Low Outgassing, Space and Vacuum Service 45 - 55
SAE AMS7269A-1982 RINGS, SEALING, SILICONE RUBBER Low Outgassing, Space and Vacuum Service 45 - 55
SAE AMS7269-1974 RINGS, SEALING, SILICONE RUBBER Low Outgassing, Space and Vacuum Service 45 - 55
SAE AMS7269B-2003 RINGS, SEALING, SILICONE (PVMQ) RUBBER Low Outgassing, Space and Vacuum Service 45 - 55
SAE AMS7269B-1991 RINGS, SEALING, SILICONE (PVMQ) RUBBER Low Outgassing, Space and Vacuum Service 45 - 55

U.S. Air Force

AIR FORCE MIL-V-26115 A-1957 VACUUM SYSTEM, LEAK DETECTOR, AUXILIARY AF-E34T-1

IN-BIS

IS 10688-1983 Methods to verify air tightness of vacuum equipment

Standards New Zealand

NZS/BS 1780:1985 Specification for bourdon tube pressure and vacuum gauges

CN-KA

KA/T 17-2023 Density logging instrument for coal mines

GB-REG

REG NASA-LLIS-0674-2000 Lessons Learned - Vacuum Seals Design Criteria
REG NASA-LLIS-0537-1996 Lessons Learned - O-Ring Manufacture for Vacuum Sealing

U.S. Military Regulations and Norms

ARMY A-A-52316 C-2010 TESTER, CONSTRUCTION MATERIALS, MOISTURE& DENSITY (TCMMD)

Danish Standards Foundation

DANSK DS/ISO 5072:2013 Brown coals and lignites - Determination of true relative density and apparent relative density
DS/ISO 5072:2013 Brown coals and lignites - Determination of true relative density and apparent relative density
DANSK DS/EN 993-17:1999 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum
DANSK DS/EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum
DS/EN 993-17:1999 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum
DS/EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum

The American Road & Transportation Builders Association

AASHTO T 331-2023 Bulk Specific Gravity (G _mb ) and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
AASHTO T 331-2010 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method
AASHTO TP 69-2004 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
AASHTO T 331-2013 Standard Method of Test for Bulk Specific Gravity (Gmb) and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method
AASHTO T 331-2021 Standard Method of Test for Bulk Specific Gravity (Gmb) and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
AASHTO T 331-2007 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method

Swedish Institute for Standards

SS-EN 993-17:1998 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum

AASHTO - American Association of State Highway and Transportation Officials

T 331-2010 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method
T 331-2008 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method
T 331-2007 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
T 331-2013 Standard Method of Test for Bulk Specific Gravity (Gmb) and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method

Magyar Szabványügyi Testület

MSZ KGST 1855-1979 Air pressure gauges, vacuum pressure gauges, counting tables and proportional tables for vacuum gauges
MSZ KGST 2407-1980 Access specifications for cylindrical room pressure of air pressure gauges, vacuum pressure gauges, and vacuum gauges
MSZ KGST 3579-1982 Cutting specifications for air pressure gauges, vacuum pressure gauges, and vacuum gauges for corner room pressures

PT-IPQ

NP 3757-1989 SOLID FUELS Cokes Determination of true relative density, apparent relative density and porosity
NP 1695-1980 Crude oil and liquid petroleum products. Measurement of density and relative density by densitometer

CU-NC

NC 82-05-5-1984 Wines. Testing Methods. Determination of Relatiy and Absolute Density

Standards Norway

NS-EN 993-18:2002 Methods of test for dense shaped refractory products — Part 18: Determination of bulk density of granular materials by the water method with vacuum
NS-EN 993-17:1998 Methods of test for dense shaped refractory products — Part 17: Determination of bulk density of granular materials by the mercury method with vacuum

European Committee for Standardization (CEN)

EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum

United States Navy

NAVY MIL-C-10464 F REINST NOTICE 2-1999 CANS, HERMETIC SEALING, METAL, LIGHT GAGE, TEAR-STRIP TYPE
NAVY MIL-C-10464 F-1990 CANS, HERMETIC SEALING, METAL, LIGHT GAGE, TEAR-STRIP TYPE

PL-PKN

PN M43815-08-1986 vacuum joints ealing rings of bakable reat-diameter joints

Spanish Association for Standardization (UNE)

UNE-EN 993-18:2003 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum.
UNE-EN 993-17:1999 METHODS OF TEST FOR DENSE SHAPED REFARACTORY PRODUCTS - PART 17: DETERMINATION OF BULK DENSITY OF GRANULAR MATERIALS BY THE MERCURY METHOD WITH VACCUM