Drainage method true density

Drainage method true density, Total:230 items.

The international standard classification for "Drainage method true density" includes: Insulating fluids , Coals , Solid fuels , Refractories , Conducting materials , Organic chemicals , Natural fibres , Plastics in general , Iron ores , Cement. Gypsum. Lime. Mortar , Drainage systems , Ceramics in general , Tobacco, tobacco products and related equipment .

The Chinese standard classification for "Drainage method true density" includes: Masonry product , Carbon material , Coal analysis methods , Carbon material in general , Fireproof material in general , Coke , Coal tar processed products , Cotton textile in general , Basic standards and general methods for synthetic resin and plastic , Iron ore , Cement , Building water supply and draining engineering , Petroleum coke , Solid fuel ore in general , Hygiene, safety and labor protection , Water supply and draining engineering in general , Daily use glass, ceramic, enamel and plastic products in general , Tobacco curing in general , Technical Management , Water supply and draining instrument and equipment .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 217-2008 Determination of true relative density of coal
GB/T 2997-2000 Test Method for Bulk Density, Apparent Porosity and True Porosity of Dense Shaped Refractory Products
GB/T 8330-1987 Method for the determination of true density of ion exchange resins in wet state
GB/T 17686-1999 Cotton fibre--Determination of linear density--Array method
GB/T 6155-2008 Carbon materials-determination of the true density or porosity
GB/T 17686-2008 Cotton fibre - Determination of linear density - Array method
GB/T 217-1996 Determination of true relative density of coal
GB/T 24203-2009 Carbon materials—Determination of the true density or true poroous—Boiling method
GB/T 4511.4-1984 Coke--Determination of true relative density
GB/T 5071-1997 Refractory materials - Determination of true density
GB/T 24586-2009 Iron ores—Determination of apparent density,true density and porosity
GB/T 4511.1-2008 Coke - Determination of true relative density apparent relative density and porosity
GB/T 9966.3-2001 Test methods for natural facing stones-Part 3:Test methods for bulk density,true density,true porosity and water absorption
GB/T 208-2014 Test method for determinging cement density
GB/T 43298-2023 General specification for vacuum drainage integrated equipment
GB/T 208-1994 STANDARD test method for cement density
GB/T 8330-2008 Determination of specific gravity of ion exchange resins in wet state
GB/T 5071-2013 Refractory materials—Determination of true density
GB/T 2997-2015 Test method for bulk density, apparent porosity and true porosity of dense shaped refractory products
GB/T 9966.3-2020 Test methods for natural stone—Part 3:Determination of water absorption,bulk density,true density and true porosity
GB/T 6155-1985 Carbon materials--Determination of the true density

Professional Standard - Ferrous Metallurgy

YB 4091-1992 Method for measuring true density of carbon materials (distilled water boiling method)

Taiwan Provincial Standard of the People's Republic of China

CNS 11121-1984 Method for Determination of True Relative Density, Apparent Relative Density and Porosity of Coke
CNS 620-1998 Method for determination of true density of refractory materials
CNS 11272-1985 Method of Test for Density of Hydraulic Cement

Professional Standard - Petrochemical Industry

SH/T 0033-1990 Determination method for actual density of petroleum coke

Professional Standard - Coal

MT 39-1987 Determination Methods for Rock Actual Density
MT/T 713-1997 Determination of true density for mine dust
MT/T 39-1987 Method for Determination of True Density of Rock

Group Standards of the People's Republic of China

T/GZHG 013-2022 Nano-modified high-density polyethylene (MUHDPE) alloy drainage pipe
T/GZHG 002-2020 Nano-modified high-density polyethylene (MUHDPE) alloy drainage pipe
T/CAB 1038-2020 Determination of hydrogen storage density of hydrogenated liquid organic hydrogen carrier - Water displacement method
T/QAS 026-2021 Gravimetric method for determination of density of brine brine
T/CECS 544-2018 Technical specification for indoor vacuum drainage system engineering
T/SXCIES 003-2023 Determination of true relative density of coal ash and slag
T/CSTM 01065-2024 Test method for bulk density, apparent porosity，water absorption and apparent bulk density of dense shaped refractory—Water boiling process
T/GZHG 030-2022 Anhydrous phosphogypsum modified high-density polyethylene double-wall corrugated drainage pipe

Professional Standard - Urban Construction

CJ/T 250-2007 High density polyethylene pipes and fittings for drainage inside buildings
CJ/T 216-2013 Resilient-seated gate valves for water supply and drainage service
CJ/T 216-2005 Resilient-seated gate valves for water supply and drainage service
CJ/T 250-2018 High density polyethylene pipes and fittings for drainage inside buildings
CJ/T 358-2010 High density polyethylene (HDPE) sewer pipes for trenchless installation

Professional Standard - Light Industry

QB/T 1010-2015 Test method for true density of ceramic material and pigment
QB/T 1010-1999 Actual Density Determination of Ceramic Material and Pigment

轻工业部

QB 1010-1991 Method for determination of true density of pigments for daily ceramic materials

Professional Standard - Commodity Inspection

SN/T 0482-1995 High-speed determination of true relative density apparent relative density and porosity of coke for export

Professional Standard - Tobacco

YC/T 473-2013 Determination of apparent density,true density and inner pore volume of cut tobacco

未注明发布机构

DIN EN 1936:1999 Natural stone test method - Determination of real density and apparent density, and of total and open porosity
DIN 10459 E:2019-11 Hydrometric determination of density of milk
ASTM RR-D04-1020 2003 D6752/D6752M-Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
DIN CEN/TS 17189:2018*DIN SPEC 78003:2018 Materials obtained from end of life tyres (ELT) - Determination of the true density of granulates - Method based on water pycnometry
ASTM RR-D02-1687 2010 D2638-Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer

Professional Standard - Electron

SJ/T 10943-1996 Test method for granulometric distribution of alundum powder for vacuum tubes - Density balance method

工业和信息化部

SJ/T 10943-2020 Test method for granulometric distribution of alundum powder for vacuum tubes-Density balance method

Professional Standard - Recommended Standards for Engineering Construction

CECS 316-2012 Technical specification for outdoor vacuum sewage system engineering
CECS 282-2010 Technical specification for HDPE pipeline engineering of building drainage

Professional Standard - Traffic

JT/T 1169-2017 Vacuum sealing device for porous asphalt mixture

Professional Standard - Building Materials

JC/T 551-1994 Test method for sealing and life of drain valve for low water tank fittings of toilet

German Institute for Standardization

DIN EN 993-17:1999 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vakuum; German version EN 993-17:1998
DIN EN 12109:1999 Vacuum drainage systems inside buildings; German version EN 12109:1999
DIN EN 12109:1999-06 Vacuum drainage systems inside buildings; German version EN 12109:1999
DIN EN 993-2/A1:2004 Methods of test for dense shaped refractory products - Part 2: Determination of true density; German version EN 993-2:1995/A1:2003
DIN EN 993-2:1995-04 Methods of test for dense shaped refractory products - Part 2: Determination of true density; German version EN 993-2:1995
DIN EN 993-18:2002-11 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum; German version EN 993-18:2002
DIN 10459:2020-09 Hydrometric determination of density of milk
DIN CEN/TS 17189:2018-08*DIN SPEC 78003:2018-08 Materials obtained from end of life tyres (ELT) - Determination of the true density of granulates - Method based on water pycnometry; German version CEN/TS 17189:2018
DIN 3543-4:1984 High density polyethylene (HDPE) tapping valves for HDPE pipes; dimensions
DIN EN 1936:2007-02 Natural stone test method - Determination of real density and apparent density, and of total and open porosity; German version EN 1936:2006
DIN EN 12294:1999 Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum; German version EN 12294:1999

UNKNOWN

YB 4091-92 Method for determination of true density of carbon materials (distilled water boiling method)

Korean Agency for Technology and Standards (KATS)

KS F 2397-2005 Standard test method for density of drained asphalt mixtures
KS F 2397-2013 Standard test method for density of drained asphalt mixtures
KS E ISO 1014:2002 Coke-Determination of true relative density, apparent relative density and porosity
KS B 6314-2-2002(2012) Positive-displacement oil-sealed rotary vacuum pumps－Measurement of volume rate of flow(pumping speed)
KS V ISO 15749-3-2021 Drainage systems on ships and marine structures－Part 3：Sanitary drainage, drain piping for vacuum systems
KS V ISO 15749-3-2006(2016) Drainage systems on ships and marine structures－Part 3：Sanitary drainage, drain piping for vacuum systems
KS V ISO 15749-3-2006(2021) Drainage systems on ships and marine structures－Part 3：Sanitary drainage, drain piping for vacuum systems
KS F 2495-2017 Testing method for maximum specific gravity and density of asphalt mixtures using automatic vacuum sealing method
KS F 2496-2012 Testing method for bulk specific gravity and density of compacted asphalt mixtures using automatic vacuum sealing method
KS V ISO 11812-2014(2019) Small crafts — Watertight cockpits and quick-draining cockpits
KS L 5110-2021 Test method of density of hydraulic cement
KS F 2495-2012 Testing method for maximum specific gravity and density of asphalt mixtures using automatic vacuum sealing method
KS A ISO 5725-3-2012(2017) Accuracy(trueness and precision) of measurement methods and results－Part 3：lntermediate measures of the precision of a standard measurement method
KS V ISO 15749-3:2006 Drainage systems on ships and marine structures－Part 3：Sanitary drainage, drain piping for vacuum systems
KS E ISO 5072-2019 Brown coals and lignites－Determination of true relative density and apparent relative density
KS F 2495-2022 Testing method for maximum specific gravity and density of asphalt mixtures using automatic vacuum sealing method
KS E ISO 1014-2002(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
KS E ISO 5072-2009(2019) Brown coals and lignites－Determination of true relative density and apparent relative density
KS A 4513-2000 MEASURING METHODS OF B RADIOACTIVITY CONCENTRATION OF DRAIN WATER
KS E ISO 1014:2022 Coke — Determination of true relative density, apparent relative density and porosity
KS A 4513-1985 MEASURING METHODS OF B RADIOACTIVITY CONCENTRATION OF DRAIN WATER
KS F 2495-2017(2022) Testing method for maximum specific gravity and density of asphalt mixtures using automatic vacuum sealing method
KS M ISO 5267-2:2002 Pulp－Determination of drainability－Part 2: “Canadian Stanard” freeness method
KS F 2496-2022 Testing method for bulk specific gravity and density of compacted asphalt mixtures using automatic vacuum sealing method
KS F 2496-2017 Testing method for bulk specific gravity and density of compacted asphalt mixtures using automatic vacuum sealing method

RU-GOST R

GOST 8066-1977 Black powders. Real density determination method
GOST 2409-1980 Refractory materials and articles. Method of water absorption, bulk density, apparent and true porosities determination
GOST 2409-2014 Refractories. Method for determination of bulk density, apparent and true porosity, water absorption
GOST 2160-2015 Solid mineral fuel. Determination of true and apparent density
GOST R 56300-2014 Refractories and refractory raw materials. Methods of true density determination
GOST 32763-2014 Automobile roads of general use. Mineral powder. The method of determining the true density

Standard Association of Australia （SAA）

AS/NZS 2891.7.1:2015 Methods for sampling and testing bitumen. Determination of maximum density of bitumen. Drainage method.
AS 1774.6:2001 Refractories and refractory materials - Physical test methods - Determination of true density

Association Francaise de Normalisation

NF P16-210*NF EN 12109:1999 Vacuum drainage systems inside buildings.
NF B40-339*NF EN 993-17:1999 Methods of test for dense shaped refractory products. Part 17 : determination of bulk density of granular materials by the mercury method with vacuum.
NF EN 993-18:2002 Test methods for dense shaped refractory products - Part 18: determination of the apparent density of granular materials by the vacuum water method
NF M03-039*NF ISO 1014:2004 Coke - Determination of true relative density, apparent relative density and porosity.
NF B40-340*NF EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18 : determination of bulk density of granular materials by the water method with vacuum
NF EN 12697-5:2018 Mélanges bitumineux - Méthodes d'essai - Partie 5 : masse volumique réelle (MVR)
NF M03-039:1982 SOLID FUELS. COKE. DETERMINATION OF TRUE RELATIVE DENSITY,APPARENT RELATIVE DENSITY AND POROSITY.
NF M01-018*NF ISO 5072:2013 Brown coals and lignites - Determination of true relative density and apparent relative density
NF J95-002:2003 Small craft - Watertight cockpits and quick-draining cockpits.
NF T54-941:1999 Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum.
NF B40-301*NF EN 993-2:1995 Methods of test for dense shaped refractory products. Part 2 : determination of true density.

CU-NC

NC 82-05-5-1984 Wines. Testing Methods. Determination of Relatiy and Absolute Density

American Society for Testing and Materials (ASTM)

ASTM C1119-90(1995) Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes
ASTM C1119-90(2004)e1 Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes
ASTM C1119-90(1999) Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes
ASTM C1119/C1119M-90(2015) Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes
ASTM C1119/C1119M-90(2009)e1 Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes
ASTM C1119-90(2004) Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes
ASTM D2840-69 Method of Test for Average True Particle Density of Hollow Microspheres
ASTM UOP766-91 Piece Density by Mercury Displacement
ASTM C188-16 Standard Test Method for Density of Hydraulic Cement
ASTM C1214-19 Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method

ZA-SANS

SANS 5901:1978 True relative density of refractory materials (Pycnometer method)
SANS 5072:2005 Brown coals and lignites - Determination of true relative density and apparent relative density
SANS 5905:1978 Bulk density of dense refractory bricks (mercury balance method)
SANS 1014:1985 Coke - Determination of true relative density, apparent relative density and porosity
SANS 4633:2008 Rubber seals - Joint rings for water supply, drainage and sewerage pipelines - Specification for materials
SANS 12294:1999 Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum

International Organization for Standardization (ISO)

ISO 1014:1985 Coke; Determination of true relative density, apparent relative density and porosity
ISO 5072:2021 Brown coals and lignites — Determination of true relative density and apparent relative density
ISO 1014:2021 Coke — Determination of true relative density, apparent relative density and porosity
ISO 1014:1975 Coke — Determination of true relative density, apparent relative density and porosity
ISO 12154:2014 Determination of density by volumetric displacement - Skeleton density by gas pycnometry
ISO 4633:2015 Rubber seals - Joint rings for water supply, drainage and sewerage pipelines - Specification for materials
ISO 4633:2002 Rubber seals - Joint rings for water supply, drainage and sewerage pipelines - Specification for materials

SCC

NS-EN 993-18:2002 Methods of test for dense shaped refractory products — Part 18: Determination of bulk density of granular materials by the water method with vacuum
DANSK DS/EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum
AENOR UNE-EN 12109:1999 Vacuum drainage systems inside buildings
DANSK DS/EN 12109:2000 Vacuum drainage systems inside buildings
NS-EN 12109:1999 Vacuum drainage systems inside buildings
CSA Z168.11-1994(R2001) Vacuum Devices Used for Suction and Drainage
CSA Z168.11-1994(R2000) Vacuum Devices Used for Suction and Drainage
SN-CEN/TS 17189:2018 Materials obtained from end of life tyres (ELT) - Determination of the true density of granulates - Method based on water pycnometry
DIN 10459:2020 Hydrometric determination of density of milk
DANSK DS/ISO 5725-5:2000 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method
DANSK DS/ISO 5725-3:1995 Accuracy (trueness and precision) of measurement methods and results – Part 3: Intermediate measures of the precision of a standard measurement method
NS-EN 993-2:1995 Methods of test for dense shaped refractory products — Part 2: Determination of true density
DANSK DS/ISO 5072:2013 Brown coals and lignites - Determination of true relative density and apparent relative density
SA TS 100:2018 Vacuum WC pans, vacuum urinals and interface valves intended for use with vacuum drainage systems and designs
AENOR UNE-EN 12294:2000 Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum
NS-EN 1936:2006 Natural stone test methods — Determination of real density and apparent density, and of total and open porosity
SA TS 100:2015 Vacuum WC pans and interface valves intended for use with vacuum drainage systems and designs
DANSK DS/EN 993-2:1995 Methods of test for dense shaped refractory products - Part 2: Determination of true density
DANSK DS/EN ISO 15749-3:2004 Ships and marine technology - Drainage systems on ships and marine structures - Part 3: Sanitary drainage, drain piping for vacuum system
NS-EN 1936:1999 Natural stone test methods — Determination of real density and apparent density, and of total and open porosity
AENOR UNE-EN 1936:2007 Natural stone test methods - Determination of real density and apparent density, and of total and open porosity

GOST

GOST R 70544-2022 Coke. Methods for the determination of true relative density, apparent relative density and porosity

European Committee for Standardization (CEN)

EN 1091:1996 Vacuum Sewerage Systems Outside Buildings
EN 12109:1999 Vacuum drainage systems inside buildings
EN ISO 11812:2018 Small craft - Watertight cockpits and quick-draining cockpits (ISO 11812:2001)
PD CEN/TS 17189:2018 Materials obtained from end of life tyres (ELT) - Determination of the true density of granulates - Method based on water pycnometry
EN 993-17:1998 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum
EN 12294:1999 Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum

British Standards Institution (BSI)

BS EN 1091:1997 Vacuum sewerage systems outside buildings
BS EN 993-2:1995 Methods of test for dense shaped refractory products. Determination of true density
BS EN 12109:1999 Vacuum drainage systems inside buildings
BS EN 993-2:1995(2004) Methods oftest for dense shaped refractory products — Part 2 : Determination oftrue density
BS ISO 5072:2021 Brown coals and lignites. Determination of true relative density and apparent relative density
BS ISO 1014:2021 Coke. Determination of true relative density, apparent relative density and porosity
BS ISO 5072:2013 Brown coals and lignites. Determination of true relative density and apparent relative density
BS EN 1936:2006(2007) Natural stone test methods — Determination of real density and apparent density, and of total and open porosity
BS ISO 12154:2014 Determination of density by volumetric displacement. Skeleton density by gas pycnometry
BS EN ISO 15749-3:2004 Ships and marine technology - Drainage systems on ships and marine structures - Sanitary drainage, drain piping for vacuum system
BS ISO 21360-2:2020 Vacuum technology. Standard methods for measuring vacuum-pump performance - Positive displacement vacuum pumps
BS EN 993-18:2002 Methods of test for dense shaped refractory products - Determination of bulk density of granular materials by the water method with vacuum

Lithuanian Standards Office

LST EN 993-18-2003 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum
LST EN 12109-2000 Vacuum drainage systems inside buildings
LST ISO 5018:1998 Refractory materials. Determination of true density
LST EN 993-2-2001 Methods of test for dense shaped refractory products - Part 2: Determination of true density
LST EN 993-2-2002/A1-2004 Methods of test for dense shaped refractory products - Part 2 : Determination of true density
LST EN 1936-2007 Natural stone test methods - Determination of real density and apparent density, and of total and open porosity

AENOR

UNE-EN 993-18:2003 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum.
UNE-EN 12109:1999 VACUUM DRAINAGE SYSTEMS INSIDE BUILDINGS.
UNE-EN 993-2/A1:2004 Methods of test for dense shaped refractory products - Part 2 : Determination of true density
UNE-EN 993-2:1996 Methods of test for dense shaped refractory products - Part 2: Determination of true density
UNE-EN 1936:2007 Natural stone test methods - Determination of real density and apparent density, and of total and open porosity
UNE 82009-4:1999 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 4: BASIC METHODS FOR THE DETERMINATION OF THE TRUENESS OF A STANDARD MEASUREMENT METHOD.

Danish Standards Foundation

DS/EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum
DS/EN 12109:2000 Vacuum drainage systems inside buildings
DS/EN 993-2:1995 Methods of test for dense shaped refractory products - Part 2: Determination of true density
DS/EN 993-2/A1:2004 Methods of test for dense shaped refractory products - Part 2: Determination of true density
DS/ISO 5072:2013 Brown coals and lignites - Determination of true relative density and apparent relative density
DS/EN 1936:2007 Natural stone test methods - Determination of real density and apparent density, and of total and open porosity

ES-AENOR

UNE 53-365-1990 Characteristics and test methods of high-density vinyl pipes for water diversion and drainage of underground rivers
UNE 53-332-1990 Characteristics and test methods of high-density vinyl pipes and fittings for water diversion and drainage of underground rivers
UNE 53-333-1990 Characteristics and test methods of high-density vinyl pipes and fittings for water diversion and drainage of underground rivers

Indonesia Standards

SNI 2531-2015 Metode uji densitas semen hidraulis

Aerospace, Security and Defence Industries Association of Europe (ASD)

ASD-STAN PREN 6018-1990 Aerospace Series Test Methods for Metallic Materials Determination of Density According to Displacement Method (Issue P 1)

GSO

GSO ISO 5018:2017 Refractory materials -- Determination of true density
OS GSO ISO 5018:2017 Refractory materials -- Determination of true density
OS GSO ISO 5725-5:2010 Accuracy (trueness and precision) of measurement methods and results -- Part 5: Alternative methods for the determination of the precision of a standard measurement method
BH GSO ISO 5072:2016 Brown coals and lignites - Determination of true relative density and apparent relative density
OS GSO ISO 5072:2013 Brown coals and lignites - Determination of true relative density and apparent relative density
GSO ISO 1014:2013 Coke - Determination of true relative density, apparent relative density and porosity
GSO ISO 15749-3:2013 Ships and marine technology -- Drainage systems on ships and marine structures -- Part 3: Sanitary drainage, drain piping for vacuum systems
GSO ISO 5072:2013 Brown coals and lignites - Determination of true relative density and apparent relative density

CZ-CSN

CSN 44 1322 ZZ1-2001 Solid fuel. Determination of true density
CSN ISO 5018:1994 Refractory materials.Determination of true density
CSN 72 5010-1988 Determination of water absorptivity, apparent and true porosity, bulk density and apparent density solid density of fired ceramic materials and products

PL-PKN

PN B12042-1992 Dranaige. Design. Spacing and depth of dranaige

American National Standards Institute （ANSI)

ANSI/ASME A112.3.1-2007 Stainless Steel Drainage Systems for Sanitary DWV, Storm, and Vacuum Applications, Above and Below-Ground

American Society of Mechanical Engineers (ASME)

ASME A112.3.1-2007 Stainless Steel Drainage Systems for Sanitary DWV, Storm, and Vacuum Applications, Aboveand Below-Ground

SE-SIS

SIS SMS 2015-1967 Plastic pipes. Pressure and waste water pipes of hi.gh density polyethylene. Testing

Society of Automotive Engineers (SAE)

SAE AS407-5-1940 AS407 Sealing Ring. Fuel. Drain Valve

The American Road & Transportation Builders Association

AASHTO T 133-1998 Standard Method of Test for Density of Hydraulic Cement
AASHTO T 133-2016 Standard Method of Test for Density of Hydraulic Cement
AASHTO T 133-2011 Standard Method of Test for Density of Hydraulic Cement

VN-TCVN

TCVN 6530-2-1999 Refractories.Methods of test.Part 2: Determination of true density

YU-JUS

JUS B.H8.351-1987 Methods of analysis of coal andcoke. Determination of the true relative density, the apparent relative densi-ty and the p orosity of coke

KR-KS

KS E ISO 1014-2022 Coke — Determination of true relative density, apparent relative density and porosity

AASHTO - American Association of State Highway and Transportation Officials

T 133-2016 Standard Method of Test for Density of Hydraulic Cement
T 133-2011 Standard Method of Test for Density of Hydraulic Cement
T 133-2019 Standard Method of Test for Density of Hydraulic Cement

HU-MSZT

MNOSZ 5221-1951 Cable plug drain seal accessories

IN-BIS

IS 1528 Pt.9-1980 Methods for Sampling and Physical Testing of Refractory Materials Part IX Determination of True Specific Gravity and True Density

PT-IPQ

NP EN 12294-2002 Plastics piping systems Systems for hot and cold water Test method for leaktightness under vacuum

ES-UNE

UNE-CEN/TS 17189:2018 Materials obtained from end of life tyres (ELT) - Determination of the true density of granulates - Method based on water pycnometry (Endorsed by Asociación Española de Normalización in May of 2020.)