GB/T 235-2013 in English
VALIDMetallic materials—Sheet and strip—Reverse bend test
- Issued on:2013-09-06
- Implemented on:2014-05-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$107.00
《GB/T 235-2013金属材料 薄板和薄带 反复弯曲试验方法》由TC183（全国钢标准化技术委员会）归口，TC183SC4（全国钢标准化技术委员会力学及工艺性能试验方法分会）执行，主管部门为中国钢铁工业协会。
本标准规定了金属薄板和薄带反复弯曲试验方法的原理、符号、试验设备、试样、试验程序和试验报告。
本 标准适用于厚度等于或小于3mm 的金属薄板和薄带反复弯曲塑性变形能力的测定。
1 Scope
This standard specifies the principle, symbol, test equipment, test piece, test procedure and test report of reverse bend test method for metal sheet and strip.
This standard is applicable to the determination of plastic deformation capacity of metal sheet and strip 3mm thick or less in reverse bending.
2 Symbols and Descriptions
Foreword I
1 Scope
2 Symbols and Descriptions
3 Principle
4 Test Equipment
5 Test Piece
6 Test Procedure
7 Test Report
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-
GB/T 4156-2020 in English
Metallic materials—Sheet and strip—Erichsen cupping test
2020-03-31 -
GB/T 5028-2025 in English
Metallic materials—Sheet and strip—Determination of tensile strain hardening exponent（n）
2025-06-30 -
GB/T 238-2013 in English
Metallic materials—Wire—Reverse bend test
2013-09-06 -
GB/T 2976-2020 in English
Metallic materials—Wire—Wrapping test
2020-12-14
