Three-point bending test method for metals

Three-point bending test method for metals, Total:393 items.

The international standard classification for "Three-point bending test method for metals" includes: Mechanical testing of metals , Raw materials and raw glass , Advanced ceramics , Other methods of testing of metals , Connecting devices , Refractories , Aluminium products , Glass in general , Corrosion of metals , Wires , Testing of metals , Materials for aerospace construction .

The Chinese standard classification for "Three-point bending test method for metals" includes: Metal processing property test method , Ceramic and glass in general , Metal physical property test method , Metal nondestructive testing method , Metal mechanical property test method , Fireproof material in general , Furniture in general , Forging and pressing , Industrial technical glass , Metal chemical property test method , Vessel materials and their inspection methods , Bare wire , Composite materials and solid fuels .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 244-2008 Metallic materials - Tube - Bend test
GB/T 232-1999 Metallic Materials - Bend Test
GB/T 15825.5-2008 Sheet metal formability and test methods - Part 5: Bending test
GB/T 38978-2020 Refractory products—Determination of stress-strain (three-point bending method）
GB/T 5985-2003 Test method for specific flexivity constant of ther mostat metals
GB/T 38686-2020 Test method for flexibility of ultrathin glass—Two point bending method
GB/T 4909.5-2009 Test methods for bare wires - Part 5: Bend test - Reverse bend test
GB/T 7733-1987 Matals-rotating bar bending corrosion fatigue testing
GB/T 14452-1993 Metallic materials－Determination of bending mechanical properties
GB/T 4337-1984 Metals--Rotating bar bending fatigue testing
GB/T 15825.5-1995 Sheet metal formability and test methods-Bending test
GB/T 34171-2017 Test method for flexural property of thin and ultrathin glass--Three-point bending method
GB/T 45763-2025 Fine ceramics—Test method for flexural strength of ceramic thin plates at room temperature—Three-point bending or four-point bending
GB/T 244-1997 Metallic materials--Tube--Bend test
GB/T 4909.5-1985 Test methods for bare wires--Bend test--Reverse bend test
GB/T 232-2010 Metallic materials—Bend test
GB/T 45878-2025 Metallic materials—Fatigue testing—Axial plane bending method
GB/T 24298-2009 Standard test method for cross curvature of thermostat metals
GB/T 238-2013 Metallic materials—Wire—Reverse bend test
GB/T 238-1984 Metallic materials-wire-reverse bend test
GB/T 8364-2003 Test method for specific thermal deflection of thermostat metals
GB/T 232-2024 Metallic materials—Bend testing method
GB/T 235-2013 Metallic materials—Sheet and strip—Reverse bend test
GB/T 244-2020 Metallic material—Tube—Bend test method
GB/T 41049-2021 Test method for flexural properties of fibre metal laminates
GB/T 4337-2008 Metallic materials - Fatigue testing - Rotating bar bending method
GB/T 8364-2008 Test methods of thermal flexure of thermostat metals
GB/T 2107-1980 Metal material--Twisting fatigue test
GB/T 4909.6-1985 Test methods for bare wires--Bend test--Single bend test
GB/T 13665-1992 Test method for damping capacity of metallic damping materials-Torsion pendulum method and flexural resonance method
GB/T 13665-2007 Test method for damping capacity of metallic damping materials—Torsion pendulum method and bending vibration method
GB/T 4337-2015 Metallic materials―Fatigue testing―Rotating bar bending method
GB/T 238-2002 Metallic materials - Wire - Reverse bend test
GB/T 32976-2016 Metallic materials—Tubes—Transverse bending test
GB/T 40403-2021 Corrosion of metals and alloys—Methodology for determining the resistance of metals to stress corrosion cracking using the four-point bend method

Professional Standard - Aviation

HB 5184-1981 Metallic Materials-Tube - Bend Test
HB 7617-1998 Test Method for Bending Property of Fiber Reinforced Metal Matrix Composite Layer Plate
HB 5152-1996 Method of Rotating Bending Fatigue Test for Metal at Room Temperature
HB 6140.4-1987 Test Methods for Formability of Sheet Metal - Bending Test
HB 5153-1980 High temperature rotating bending fatigue test method for metals
HB 5153-1996 Method of Rotating Bending Fatigue Test for Metal at High Temperature
HB 5152-1980 Test method for rotational bending fatigue of metals at room temperature
HB 5175-1981 Metal wire repeated bending test method
HB 5175-1996 Metal wire repeated bending test method
HB 5178-1996 Metal sheet (strip) material repeated bending test method
HB 5178-1981 Metal sheet (strip) material repeated bending test method

Professional Standard - Machinery

JB/T 7716-1995 Four-point bending fatigue test method for welded joints
JB/T 7131-1993 Hot bimetal transverse bend test method
JB/T 7131-2002 Standard test method for cross curvature of thermostat metals

Professional Standard - Ferrous Metallurgy

YB/T 5349-2006 Metallic materials - Determination of bending mechanical properties
YB/T 5349-2014 Metallic materials. Determination of bending mechanical porperties

未注明发布机构

JIS R 1604:1987 Testing Method for Flexural Strength (Modulus of Rupture) of High Performance Ceramics at Elevated Temperature
DVS 3103:2020-07 Mechanical properties test methods Part 3: Four-point bending test for ceramic-metal composite joints
JIS K 7057:1987 Testing Method for Apparent Interlaminar Shear Strength of Glass Fiber Reinforced Plastics
DVS 3101-2:1999-05 Mechanical testing of ceramic-metal joints - Four-point bending test

Taiwan Provincial Standard of the People's Republic of China

CNS 7375-1997 Method of rotating bending fatigue testing of metals
CNS 3941-1999 Method of bend test for Metallic materials
CNS 3940-1999 Bend test pieces for metallic materials
CNS 7376-1997 Method of plane bending fatigue testing of metal plates

Group Standards of the People's Republic of China

T/CSTM 00587-2023 Test method for flexural strength of crystalline silicon cells—Four-point flexural
T/CITS 0111-2024 Test method for oil and gas pipe — Full scale four-point bending test method

Professional Standard - Medicine

YY/T 0858-2011 Standard guide for three-point bending of balloon expandable vascular stents and stent systems

Standards New Zealand

NZS 1011:1964 Methods for bend testing of metals

British Standards Institution (BSI)

BS 1639:1964 Methods for bend testing of metals
BS 1639:1964(1999) Methods for Bend testing ofmetals
BS EN 2746:1998 Glass fibre reinforced plastics - Flexural test - Three point bend method
BS EN 13523-7:2001 Coil coated metals - Test methods - Resistance to cracking on bending (T-bend test)
BS EN 13523-7:2014 Coil coated metals. Test methods. Resistance to cracking on bending (T-bend test)
BS EN 910:1996 Destructive tests on welds in metallic materials - Bend tests
BS EN ISO 7438:2000 Metallic materials. Bend test
BS EN ISO 7438:2016 Metallic materials. Bend test
BS EN ISO 7438:2005 Metallic materials - Bend test
BS ISO 11093-7:1997 Paper and board. Testing of cores-Determination of flexural modulus by the three-point method
BS ISO 11093-6:1996 Paper and board. Testing of cores-Determination of bending strength by the three-point method
BS EN 13523-7:2021 Coil coated metals. Test methods. Resistance to cracking on bending (T-bend test)
12/30268961 DC BS EN 13523-7. Coil coated metals. Test methods. Part 7. Resistance to cracking on bending (T-bend test)
BS ISO 22407:2021 Metallic materials. Fatigue testing. Axial plane bending method
20/30425653 DC BS EN 13523-7. Coil coated metals. Test methods. Part 7. Resistance to cracking on bending (T-bend test)
18/30369869 DC BS EN ISO 7438. Metallic materials. Bend test
BS ISO 7801:2024 Metallic materials. Wire. Reverse bend test
BS ISO 16540:2015 Corrosion of metals and alloys. Methodology for determining the resistance of metals to stress corrosion cracking using the four-point bend method
BS EN ISO 7438:2020 Metallic materials. Bend test
BS EN 10232:1994 Metallic materials. Tube (in full section). Bend test
BS EN ISO 8491:2004 Metallic materials - Tube (in full section) - Bend test
BS 2782-10 Method 1005:1977 Methods of testing plastics. Glass reinforced plastics. Determination of flexural properties. Three point method

Gosstandart of Russia

GOST 1579-1980 Wire. Bend test method
GOST R ISO 7438-2013 Mettallic materials. Bend test
GOST 14019-1980 Metals. Methods of bend tests
GOST 14019-2003 Metallic materials. Bend test method
GOST 9454-1978 Metals. Method for testing the impact strength at low, room and high temperature
GOST 30456-1997 Metal production. Rolled steel and tubes. Methods of blow bending tests

Japanese Industrial Standards Committee (JISC)

JIS Z 2248:1996 Method of bend test for metallic materials
JIS Z 2275:1978 Method of plane bending fatigue testing of metal plates
JIS Z 2274:1978 Method of rotating bending fatigue testing of metals
JIS H 7406:1993 Test method for flexural properties of fiber reinforced metals
JIS Z 2248:2006 Metallic materials -- Bend test
JIS Z 2248:2022 Metallic materials -- Bend test
JIS Z 2286:2003 Method for high temperature rotating bending fatigue testing of metallic materials
JIS T 0313:2022 Testing methods for compression bending properties of metallic osteosynthesis devices
JIS T 0312:2009 Testing methods for bending properties of metallic osteosynthesis devices
JIS Z 2204:1996 Bend test pieces for metallic materials
JIS T 0313:2009 Testing methods for compression bending properties of metallic osteosynthesis devices
JIS Z 2248:2022 AMD 1 R:2022 Metallic materials -- Bend test (Amendment 1)
JIS Z 2248 AMD 1:2014 Metallic materials.Bend test (Amendment 1)
JIS K 7084:1993 Testing method for impact properties of carbon fibre reinforced plastics by instrumented 3-point bending impact test

American Society for Testing and Materials (ASTM)

ASTM D5023-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-23 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-01 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D8058-19 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM B478-85(2016) Standard Test Method for Cross Curvature of Thermostat Metals
ASTM E2092-18a Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-04 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-00 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-03 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D8058-23 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM E290-09 Standard Test Methods for Bend Testing of Material for Ductility
ASTM F1539-95(1999) Test Method for Constant Amplitude Bending Fatigue Tests of Metallic Bone Staples (Withdrawn 2000)
ASTM E290-97a Standard Test Method for Bend Testing of Material for Ductility
ASTM E2092-09 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-23 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D8058-24 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM B478-85(2003) Standard Test Method for Cross Curvature of Thermostat Metals
ASTM RR-E37-1032 2003 E2092-Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM C78/C78M-10 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-10e1 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM E855-90(2000) Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
ASTM E855-08 Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
ASTM D5023-99 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM C78/C78M-22 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-15 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)

German Institute for Standardization

DIN EN 2746:1998-10 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN EN 13523-7:2001 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test); German version EN 13523-7:2001
DIN EN ISO 5173:2012 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009 + Amd 1:2011); German version EN ISO 5173:2010 + A1:2011
DIN EN 13523-7:2022 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
DIN EN 13523-7:2014-08 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
DIN EN 13523-7:2022-01 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test); German version EN 13523-7:2021
DIN EN ISO 7438:2005 Metallic materials - Bend test (ISO 7438:2005); English version of DIN EN ISO 7438
DIN 50151:1957 Metal material bending test
DIN EN 13523-7:2020 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test); German and English version prEN 13523-7:2020
DIN EN 13523-7 E:2012-10 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
DIN EN ISO 7438:2021-03 Metallic materials - Bend test (ISO 7438:2020); German version EN ISO 7438:2020
DIN EN ISO 7438:2012 Metallic materials - Bend test (ISO 7438:2005); German version EN ISO 7438:2005
DIN 50153:1964 Metal material bending test
DIN EN 13523-7:2020-11 Draft Document - Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test); German and English version prEN 13523-7:2020
DIN ISO 7801:2008 Metallic Materials - Wire - Reverse bend test (ISO 7801:1984); English version of DIN ISO 7801:2008-10
DIN 51902:1997 Testing of carbon materials - Determination of flexural strength by three point method - Solid matters
DIN 51211:1961 Testing of Metallic Materials; Reverse Bend Test of Wires
DIN 51211:1978 Testing of Metallic Materials; Reverse Bend Test of Wires
DIN EN ISO 7438 E:2015-06 Bending test of metallic materials (draft)
DIN EN ISO 7438 E:2018-04 Bending test of metallic materials (draft)
DIN EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN EN 12100:1997 Plastics piping systems - Polyethylene (PE) valves - Test method for the resistance to bending between supports; German version EN 12100:1997
DIN 50113:2018 Testing of metallic materials - Rotating bar bending fatigue test
DIN EN ISO 7438:2016-07 Metallic materials - Bend test (ISO 7438:2016)
DIN EN ISO 7438:2012-03 Metallic materials - Bend test (ISO 7438:2005)
DIN 50142:1982-03 Testing of metallic materials; Flat bending fatigue test
DIN 50142:2019-09 Testing of metallic materials - Flat bending fatigue test
DIN EN 13523-7:2014 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test); German version EN 13523-7:2014
DIN EN ISO 7438:2005-10 Metallic materials - Bend test (ISO 7438:2005)
DIN 50113:1982-03 Testing of metals; Rotating bar bending fatigue test
DIN EN ISO 8491:2004-10 Metallic materials - Tube (in full section) - Bend test (ISO 8491:1998); German version EN ISO 8491:2004
DIN 50113:2018-12 Testing of metallic materials - Rotating bar bending fatigue test
DIN EN ISO 8491:2004 Metallic materials - Tube (in full section) - Bend test (ISO 8491:1998); German version EN ISO 8491:2004
DIN 51902:2009-05 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 53293:1982-02 Testing of sandwiches; Bending test
DIN EN ISO 5173:2010 Destructive tests on welds in metallic materials - Bend tests
DIN 51902:2020 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN EN 13523-7:2001-12 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test); English version of DIN EN 13523-7
DIN 50142 E:2019 Draft Document - Testing of metallic materials - Flat bending fatigue test
DIN 50111:1977 Scientific and technological bending test of metal materials
DIN EN 910:1996-05 Bend testing of welds in metallic materials
DIN 50142:1982 Testing of metallic materials; Flat bending fatigue test
DIN 51902:2020-12 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials

Standard Association of Australia （SAA）

AS 2205.3.1:1988 Methods of destructive testing of welds in metal, Method 3.1: Bend tests - Transverse guided bend test
AS 2205.3.2:1988 Methods of destructive testing of welds in metal, Method 3.2: Bend tests - Transverse free bend test
AS 2205.3.3:1988 Methods of destructive testing of welds in metal, Method 3.3: Bend tests - Longitudinal guided bend test
AS 2205.3.3:1980 Methods of destructive testing of welds in metal, Part 3.3: Bend tests - Longitudinal guided bend test
AS 2205.3.5:1997 Methods for destructive testing of welds in metal - Tongue bend test
AS 2205.3.1:1980 Methods of destructive testing of welds in metal, Part 3.1: Bend tests - Transverse guided bend test
AS 2205.3.2:1980 Methods of destructive testing of welds in metal, Part 3.2: Bend test - Transverse free bend test
AS 2205.3.5:1980 Methods of destructive testing of welds in metal, Part 3.5: Bend tests - Tongue bend test
AS 2505.4:1981 Methods for bend and related testing of metals, Part 4: Wire
AS 2205.3.3:1997 Methods for destructive testing of welds in metal - Longitudinal guided bend test
AS 2205.3.2:1997 Methods for destructive testing of welds in metal - Transverse free bend test
AS 2205.3.1:1997 Methods for destructive testing of welds in metal - Transverse guided bend test
AS 2205.3.4:1980 Methods of destructive testing of welds in metal, Part 3.4: Bend tests - Transverse joggle-butt wrap-around bend test
AS 2505.3:1989 Methods for bend and related testing of metals, Part 3: Tubular products
AS 2205.3.4:1997 Methods for destructive testing of welds in metal - Transverse joggle-butt wrap-around bend test

Standards Norway

NS-EN 2746:1998 Aerospace series — Glass fibre reinforced plastics — Flexural test — Three point bend method
NS-EN 13523-7:2021 Coil coated metals – Test methods – Part 7: Resistance to cracking on bending (T-bend test)
NS-EN 13523-7:2001 Coil coated metals — Test methods — Part 7: Resistance to cracking on bending (T-bend test)
NS-EN ISO 7438:2020 Metallic materials — Bend test (ISO 7438:2020)
NS-EN ISO 7438:2005 Metallic materials — Bend test (ISO 7438:2005)
NS-EN ISO 7438:2000 Metallic materials — Bend test (ISO 7438:1985)
NS-EN 13523-7:2014 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
NS 10152:1988 Metallic materials — Bend test (ISO 7438:1985 modified)
NS-EN 10232:1993 Metallic materials — Tube (in full section) — Bend test
NS-EN 910:1996 Destructive tests on welds in metallic materials — Bend tests

Bureau of Indian Standards

IS 2329-2005 Method for bend test on metallic tubes (in full section)
IS 1599-2023 Metallic Materials - Bend Test
IS 3260-1965 Method For Bend Test For Copper And Copper Alloys
IS 3600-5-2018 Method of Testing Fusion Welded Joints and Weld Metal in Steel Part 5 Destructive Tests on Welds in Metallic Materials —— Bend Tests ( Third Revision )
IS 1716-2023 Metallic Materials Wire Reverse Bend Test

Danish Standards Foundation

DS 10311:1959 Testing of metals. Reverse bend testing of wire. (Determination of number of bends)
DS 10310:1949 Testing of metals. Bend testing
DS/EN 13523-7:2001 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
DS/ISO 7438:2020 Metallic materials – Bend test
DANSK DS/ISO 7438:2020 Metallic materials – Bend test
DANSK DS/EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
DS/EN ISO 7438:2005 Metallic materials - Bend test
DS/EN 2746:1999 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
DS/EN 13523-7:2021 Coil coated metals – Test methods – Part 7: Resistance to cracking on bending (T-bend test)
DANSK DS/EN 13523-7:2014 Coil coated metals – Test methods – Part 7: Resistance to cracking on bending (T-bend test)
DS/EN 10232:1994 Metallic materials-Tube(in full section)-Bend test
DANSK DS/EN ISO 8491:2004 Metallic materials - Tube (in full section) - Bend test
DANSK DS/EN ISO 5173:2010 Destructive tests on welds in metallic materials – Bend tests
DANSK DS/ISO 5173:2023 Destructive tests on welds in metallic materials – Bend tests
DANSK DS/EN 910:1997 Destructive tests on welds in metallic materials - Bend tests

CZ-CSN

CSN 42 0401-1978 Bend test of metals
CSN ISO 7438:1994 Metallic materials.Bend test
CSN ISO 8491:1994 Metallic materials.Tube in full section.Bend test
CSN ISO 7801:1994 Metallic materials. Wire. Reverse bend test

IN-BIS

IS 5075-1985 Bending fatigue test method for metal rotating rods

Indonesia Standards

SNI 07-6525-2001 Methods of plane bending fatigue testing of metal plates
SNI 07-0410-1989 Compressed bending test method of metals
SNI 07-0259-1989 Bending experimental test method of metals
SNI 07-4611-1998 Reverse bend test for metallic material wires
SNI 07-6524-2001 Test methods of rotating bending fatigue testing of metals
SNI 07-4076-1996 Method of free bend test for butt welded joint

Aerospace, Security and Defence Industries Association of Europe (ASD)

ASD-STAN prEN 2002-006:1970 Metallic materials - Test methods - Part 6 : Bend testing
ASD-STAN PREN 2002-6:2000 Aerospace Series Metallic Materials Test Methods Part 6: Bend Testing
ASD-STAN PREN 2002-14:1986 Aerospace Series Test Methods for Metallic Materials Part 14 - Reverse Bend Testing of Wire
ASD-STAN prEN 6061:1970 Fibre reinforced plastics - Test method - Determination of sandwich flexural strength 4 point bending

Spanish Association for Standardization (UNE)

UNE-EN 13523-7:2014 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
UNE-EN 2746:1999 AEROSPACE SERIES. GLASS FIBRE REINFORCED PLASTICS. FLEXURAL TEST. THREE POINT BEND METHOD.
AENOR UNE-EN ISO 7438:2021 Metal materials. Bending test. (ISO 7438:2020).
UNE-EN ISO 7438:2000 METALLIC MATERIALS. BEND TEST (ISO 7438:1985)
UNE-EN 13523-7:2001 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test).
UNE-EN 13523-7:2022 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
AENOR UNE-EN 13523-7:2014 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
UNE-EN 910:1996 DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS. BEND TESTS.
UNE-EN ISO 7438:2021 Metallic materials - Bend test (ISO 7438:2020)
UNE-EN ISO 5173:2011 ERRATUM:2011 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009)

AT-ON

OENORM EN 13523-7-2021 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
ONORM EN 10232-1994 Metallic materials. Tube (in full section). Bend test
OENORM EN ISO 7438:2021 Metallic materials - Bend test (ISO 7438:2020)

Lithuanian Standards Office

LST EN 13523-7-2002 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
LST EN 2746-2001 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
LST EN ISO 7438:2005 Metallic materials - Bend test (ISO 7438:2005)
LST EN ISO 7438:2020 Metallic materials - Bend test (ISO 7438:2020)

Association Francaise de Normalisation

NF A03-158:2005 Metallic materials - Bend test.
NF T37-001-7:2014 Coil coated metals - Test methods - Part 7 : resistance to cracking on bending (T-bend test)
NF T37-001-7*NF EN 13523-7:2021 Coil coated metals - Test methods - Part 7 : resistance to cracking on bending (T-bend test)
NF A03-158*NF EN ISO 7438:2020 Metallic materials - Bend test
NF A03-158:2016 Metallic materials - Bend test
NF A03-783*NF ISO 22407:2022 Metallic materials - Fatigue testing - Axial plane bending method
NF A89-203/A1*NF EN ISO 5173/A1:2012 Destructive tests on welds in metallic materials - Bend tests.
NF A03-010:1986 Metallic materials. Wire. Reverse bend test.
NF A03-091*NF EN ISO 8491:2004 Metallic materials - Tube (in full section) - Bend test
NF A03-509-3*NF ISO 1143:2022 Metallic materials - Rotating bar bending fatigue testing
NF A05-521*NF ISO 16540:2015 Corrosion of metals and alloys - Methodology for determining the resistance of metals to stress corrosion cracking using the four-point bend method

International Organization for Standardization (ISO)

ISO 7438:2005 Metallic materials - Bend test
ISO 7438:2020 Metallic materials — Bend test
ISO 7438:2016 Metallic materials - Bend test
ISO 7438:1985 Metallic materials; Bend test
ISO 21914:2019 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
ISO 1143:1975 Metals; Rotating bar bending fatigue testing
ISO 22407:2021 Metallic materials — Fatigue testing — Axial plane bending method
ISO/DIS 7801:2023 Metallic materials — Wire — Reverse bend test
ISO 7801:1984 Metallic materials; Wire; Reverse bend test
ISO 7801:2024 Metallic materials — Wire — Reverse bend test
ISO/CD 7801 Metallic materials — Wire — Reverse bend test
ISO 16540:2015 Corrosion of metals and alloys - Methodology for determining the resistance of metals to stress corrosion cracking using the four-point bend method
ISO 1143:2010 Metallic materials - Rotating bar bending fatigue testing
ISO 8491:1986 Metallic materials; Tube (in full section); Bend test
ISO 8491:1998 Metallic materials - Tube (in full section) - Bend test
ISO 8491 Metallic materials - Tube (in full section) - Bend test
ISO 5173:2023F Destructive tests on welds in metallic materials — Bend tests

Korean Agency for Technology and Standards (KATS)

KS B 0804-2001(2006) Metallic materials－Bend test
KS B 0804-2001(2021) Metallic materials－Bend test
KS B 0804-2001(2016) Metallic materials－Bend test
KS B 0804-2021 Metallic materials－Bend test
KS B 0804-2001(2021)(英文版) Metallic materials－Bend test
KS B 0803-1985 BEND TEST SPECIMEN FOR METALS
KS B 0803-1977(1995) BEND TEST SPECIMEN FOR METALS
KS B ISO 8491-2001(2011) Metallic materials Tube(in full section) Bend test
KS B ISO 7799-2004(2009) Metallic materials－Sheet and strip 3 mm thick or less－Reverse bend test
KS B ISO 7801-2015 Metallic materials－Wire－Reverse bend test
KS B ISO 1143-2003(2018) Rotating bar bending fatigue test for metallic materials
KS B 0832-2001 Destructive tests on welds in metallic materials-Bend tests
KS B ISO 7801:2002 Metallic materials-Wire-Reverse bend test
KS B 0832-1985 Destructive tests on welds in metallic materials-Bend tests
KS B ISO 7801-2002(2012) Metallic materials－Wire－Reverse bend test
KS B ISO 7801:2015 Metallic materials－Wire－Reverse bend test
KS B 0803-2001 BEND TEST SPECIMEN FOR METALS
KS B ISO 8491:2001 Metallic materials Tube(in full section) Bend test
KS B ISO 5173:2021 Destructive tests on welds in metallic materials — Bend tests
KS B ISO 8491:2015 Metallic materials Tube(in full section) Bend test
KS B ISO 8491-2015 Metallic materials Tube(in full section) Bend test
KS B ISO 5173-2021 Destructive tests on welds in metallic materials — Bend tests
KS B ISO 5173:2016 Destructive tests on welds in metallic materials－Bend tests

South African Bureau of Standard

SANS 7438:2003 Metallic materials - Bend test
SANS 7438:2009 Metallic materials - Bend test
SANS 7801:2003 Metallic materials - Wire - Reverse bend test
SANS 547:2006 Destructive tests on welds in metallic materials - Bend tests
SANS 8491:2003 Metallic materials - Tube (in full section) - Bend test

American National Standards Institute （ANSI)

ANSI/ASTM E855:1990 Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
ANSI/ASAE S459-1992(2017) Shear and Three-Point Bending Test ofAnimal Bone
ANSI/ASAE S459-1993 Shear and Three-Point Bending Test of Animal Bones

TH-TISI

TIS 2173-2012 Metallic materials.bend test
TIS 2175-2004 Reverse bend test for metallic wire [iso title: metallic materials.wire.reverse bend test]

IT-UNI

UNI EN ISO 7438:2020 Metallic materials - Bend test
UNI 564-1960 Mechanical testing of metal materials. Bending test
UNI 6381-1968 Metal materials for aviation. Bending test

Ente Nazionale Italiano di Unificazione

UNI EN 13523-7:2022 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
UNI EN ISO 7438:2005 Metallic materials - Bend test
UNI EN ISO 7438:2016 Metallic materials - Bend test
UNI EN 13523-7:2014 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
EC 1-2004 UNI EN ISO 7438:2001 Metallic materials - Bend test.
UNI 559:1962 Mechanical testing of metallic materials. Bending test.
UNI 6381:1968 Aircraft metallic materials. Bend test.
UNI EN 910:1997 Destructive tests on welds metallic materials. Bend test.
UNI EN 2746:1999 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
UNI EN ISO 5173:2023 Destructive tests on welds in metallic materials - Bend tests
UNI ISO 1143:2022 Metallic materials - Rotating bar bending fatigue testing
UNI EN ISO 5173:2010 Destructive tests on welds in metallic materials - Bend tests
UNI EN ISO 5173:2012 Destructive tests on welds in metallic materials - Bend tests
EC 1-2008 UNI EN 910:1997 Destructive tests on welds metallic materials. Bend test.

European Committee for Standardization (CEN)

EN ISO 7438:2000 Metallic Materials - Bend Test ISO 7438: 1985
EN ISO 7438:2005 Metallic materials Bend test
EN ISO 7438:2020 Metallic materials - Bend test (ISO 7438:2020)
EN 13523-7:2021 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
EN 13523-7:2014 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
EN 13523-7:2001 Coil Coated Metals - Test Methods - Part 7: Resistance to Cracking on Bending (T-Bend Test)
EN 12100:1997 Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports
EN ISO 5173:2023 Destructive tests on welds in metallic materials - Bend tests (Incorporates Amendment A1: 2011)
EN ISO 5173:2010 Destructive tests on welds in metallic materials - Bend tests (Incorporates Amendment A1: 2011)
CEN EN 13523-7-2001 Coil Coated Metals - Test Methods - Part 7: Resistance to Cracking on Bending (T-Bend Test)
EN 910:1996 Destructive Tests on Welds in Metallic Materials - Bend Tests
EN 10232:1993 Metallic Materials - Tube (in Full Section) - Bend Test

VN-TCVN

TCVN 198-2008 Metallic materials.Bend test
TCVN 1826-2006 Metallic materials.Wire.Reverse bend test
TCVN 5401-2010 Destructive tests on welds in metallic materials.Bend tests

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 7438:2022 Metallic materials — Bend test
BH GSO ISO 21914:2023 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test

GCC Standardization Organization

GSO ISO 7438:2021 Metallic materials — Bend test
GSO ISO 21914:2022 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
GSO ISO 22407:2024 Metallic materials — Fatigue testing — Axial plane bending method
GSO ISO 7801:2015 Metallic materials -- Wire -- Reverse bend test
GSO ISO 1143:2015 Metallic materials -- Rotating bar bending fatigue testing
GSO ISO 8491:2015 Metallic materials -- Tube (in full section) -- Bend test
BH GSO ISO 5173:2024 Destructive tests on welds in metallic materials — Bend tests

Swedish Institute for Standards

SS-EN ISO 7438:2005 Metallic materials - Bend test (ISO 7438:2005)
SS 112626:1979 Metallic materials - Simple bend testing
SS-EN ISO 7438:2020 Metallic materials - Bend test (ISO 7438:2020)
SS-EN ISO 7438:2000 Metallic materials - Bend test (ISO 7438:1985)
SS-EN 14651:2005 Test method for metallic fibre concrete - Measuring the flexural tensile strength (limit of proportionality (LOP), residual)
SS 112622:1983 Metallic materials - Wire - Reverse bend test
SS-EN 10232:1994 Metallic materials - Tube (in full section) - Bend test

Society of Automotive Engineers (SAE)

SAE J949-2009 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three Point Bending Test
SAE J949-2022 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three-Point Bending Test
SAE J949_200904 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three Point Bending Test
SAE J949_202208 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three-Point Bending Test

SE-SIS

SIS SS 11 26 22-1983 Metallic materials - Wire - Reverse bend test
SIS 11 26 22-1969 Reverse bend testing of wire
SIS SS 11 26 23-1983 Metallic materials - Strip. Sheet - Reverse bend test

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 2205.3.1:2020 Destructive tests on welds in metallic materials, Method 3.1: Bend tests
AS/NZS 2205.3.1:2024 Destructive tests on welds in metallic materials, Method 3.1: Bend tests (ISO 5173:2023, IDT)

Malaysia Standards

MS 1473-1999 Method of test for measuring the dynamic mechanical properties of plastics using three point bending

AR-IRAM

IRAM PROYECTO DE NORMA 106-P.-1944 Test method for impact bending resistance of embedded specimens of metallic materials

PL-PKN

PN H04408-1990 Metals Bend test
PN-EN ISO 7438-2021-04 E Metallic materials -- Bend test (ISO 7438:2020)

RO-ASRO

STAS IS0 8491-1992 Metallic materials. Tube (in full section). Bend test
STAS 12054-1982 TESTING OF METALS BEND TEST OF ON FUSION WELDED PLATINGS
STAS 5878-1977 Tests of metals ROTATING BAR BENDING FATIGUE TESTING
STAS SR ISO 7801:1993 Metallic materials. Wire. Reverse bend test
STAS 9892-1974 Teststs of metals reverse bend testing of copper and copper alloy WIRES
STAS 777-1988 Tests of metals BEXD TEST
STAS 10417-1975 Tests of metals SIMPLE BEND TEST FOR LIGHT METAL AND LIGHT METAL ALLOY SHEETS AND STRIPS

FI-SFS

SFS-ISO 6602 E:1986 This standard is approved in English

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization

PREN 2002-6-1999 Aerospace Series Metallic Materials Test Methods Part 6: Bend Testing (Edition P2)

National Association of Corrosion Engineers (NACE)

NACE TM0316-2016 Four-point bend test method for materials used in oil and gas applications

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 7801:2015 Metallic materials -- Wire -- Reverse bend test
OS GSO ISO 1143:2015 Metallic materials -- Rotating bar bending fatigue testing

European Association of Aerospace Industries

AECMA PREN 2002-14-1986 Aerospace Series Test Methods for Metallic Materials Part 14 - Reverse Bend Testing of Wire Issue P 1
AECMA PREN 2002-6-1987 Aerospace Series Test Methods for Metallic Materials Part 6 - Bend Testing Issue P 1
AECMA PREN 2002-6-2000 Aerospace Series Metallic Materials Test Methods Part 6: Bend Testing Edition P 2

TR-TSE

TS 205-1977 BEND TESTING OF METALLIC MATERIALS

BE-NBN

NBN-EN 10232-1994 Metallic materials. Tube (in full section). Bend test

Association of German Mechanical Engineers

DVS 3101-2-1999 Mechanical testing of ceramic-to-metal connections Four-point bend test

Others: Bend test method for metallic materials,Three-point bending test of metal materials,Three-point bending test method for wood,Three point bending test method,Three-point bending strength test method for piezoelectric ceramics,Three-point bending fatigue test method,Three-point bending test method for steel pipes,Three point bending test method,Three-point bending test method for metals,Bending performance test method three-point bending method,Three-point bending test method for materials,metal bending test method,Bend test method for metallic materials,Metallic materials - bending test methods