thinnest metal

thinnest metal, Total:177 items.

The international standard classification for "thinnest metal" includes: Other rubber and plastics products , Other insulating materials , Mechanical testing of metals , Irrigation and drainage equipment , Nuts , Welding processes , Tobacco, tobacco products and related equipment , Magnetic components , Materials for aerospace construction in general , Corrosion of metals , Testing of metals .

The Chinese standard classification for "thinnest metal" includes: Other rubber products , Electrical insulating material and its products , Metal mechanical property test method , Metal processing property test method , Farming machinery and tools , Fastener , Gear and gear drive , Welding and cutting , Tobacco curing machinery , Magnetic component , Technical management , Metal casting and forging materials used for aviation and aerospace , Metal chemical property test method .

未注明发布机构

JIS R 1690:2018J Measuring method of interfacial thermal resistance between fine ceramic thin film and metal thin film
DIN 24192 Ducting for ventilation equipment; joints for sheet metal ducting and sheet metal ducting components
DIN EN 505 E:2012-08 Roofing products from metal sheet - Specification for fully supported roofing products of steel sheet

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 4156-2007 Metallic materials—Sheet and strip—Erichsen cupping test
GB/T 6172.2-2016 Prevailing torque type hexagon thin nuts(with non-metallic insert)
GB/T 34477-2017e Metallic Materials—Sheet and strip—Dent resistance test method
GB/T 6172.2-2000 Prevailing torque type hexagon thin nuts (with non-metallic insert)
GB/T 24123-2009 Metallized film for capacitors
GB/T 21538-2008 Rubber roller for metal foil-purpose coating
GB/T 24524-2009 Metallic materials—Sheet and strip—Hole expanding test
GB/T 24672-2009 The metal thin-wall tube and its accessories for sprinkling irrigation
GB/T 43115-2023 Metallic materials—Sheet and strip—Shear test method at room temperature
GB/T 5028-1999 Metallic materials-Sheet and strip-Determination of tensile strain hardening exponent( n-values)
GB/T 5027-2007 Metallic materials—Sheet and strip—Determination of plastic strain ratio
GB/T 22565-2008 Metallic materials - Sheet and strip - Method for springback evaluation in stretch bending
GB/T 5027-2016 Metallic materials―Sheet and strip―Determination of plastic strain ratio
GB/T 235-2013 Metallic materials—Sheet and strip—Reverse bend test
GB/T 5028-2008 Metallic materials - Sheet and strip - Determination of tensile strain hardening exponent
GB/T 43412-2023 Recommended process for resistance spot welding on sheet metal
GB/T 5027-1999 Metallic materials-Sheet and strip--Determination of plastic strain ratio( r-values)

Professional Standard - Tobacco

YC/T 231-2007 Metal sheets integral internal thread

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 4156-2020 Metallic materials—Sheet and strip—Erichsen cupping test
GB/T 24524-2021 Metallic materials—Sheet and strip—Hole expanding test
GB/T 24183-2021 Metallic materials—Sheet and Strip—Earing test
GB/T 38806-2020 Metallic materials- Sheet and strip-Test method for bending and folding properties

工业和信息化部/国家能源局

JB/T 13285-2017 NC sheet-metal scroll cutting machine

Military Standard of the People's Republic of China-General Armament Department

GJB 3384-1998 Lamb wave inspection method for metal sheets
GJB 2508-1995 Specification for narrow and thin strip of precious metal alloys for aerospace applications
GJB 2508A-2018 Specification for narrow and thin strip of precious metal alloys for aerospace applications

Professional Standard - Machinery

JB/T 12375-2015 Printing machinery-Metal sheet coating machine
JB/T 12376-2015 Printing machinery-Metal sheer oven
JB/T 7870-1997 Metal thin-walled pipes and fittings for sprinkler irrigation
JB/T 10616-2006 Ferromagnetic metallic thin-filmed magnetoresistance

Professional Standard - Electron

SJ/T 10464-1993 Metallized polypropylene film for capacitors
SJ/T 10465-1993 Metallized polyester film for capacitors
SJ/T 10464-2015 Metallized polypropylene film for capacitors
SJ 20149-1992 Specification for Aluminium - Metallized polyester film for capacitors
SJ/T 10465-2015 Metallized polyester film for capacitors

Professional Standard - Ferrous Metallurgy

YB/T 4287-2012 Metallic Materials-Sheet and Strip-Testing Method for Drawbead Restraining Force
YB/T 4286-2012 Metallic Material-Sheet and Strip-Testing Method for Coefficient of Friction

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34477-2017 Metallic materials—Sheet and strip—Dent resistance test method

Professional Standard - Aerospace

QJ 905-1985 Compression Test Method for Metallic Sheet Materials

Professional Standard - Agriculture

澳门第23/2018号行政法规 Maximum limit of heavy metal pollutants in food

Group Standards of the People's Republic of China

T/CISA 071-2020 Metallic materials—Sheet and strip—Axial-loading constant-amplitude cycle fatigue testing method
T/CNS 16-2020 Determination for corrosion reduction of metals and alloys in liquid lead alloys

Professional Standard - Aviation

HB 5178-1996 Metal sheet (strip) material repeated bending test method
HB 6140.2-1987 Test Methods for Formability of Sheet Metal - Drawing
HB 5178-1981 Metal sheet (strip) material repeated bending test method

工业和信息化部

QB/T 5507-2020 Laminated metal decorative plates for household appliances
QB/T 5709-2022 Biaxially oriented polyethylene terephthalate film for metal plate

Taiwan Provincial Standard of the People's Republic of China

CNS 14310-1999 Method of determining the plastic strain ratio for metallic sheet and strip

American Society of Mechanical Engineers (ASME)

ASME B32.1-1952 Preferred thicknesses for uncoated thin flat metals (under 0,250 In.)
ASME B32.3M-1984 Preferred Metric Sizes for Flat Metal Products
ASME B32.2-1969 Preferred diameters for round wire - 0,500 inches and under

Military Standards (MIL-STD)

DOD A-A-53183-1987 SPLINT, JAW (ERICH)
DOD A-A-51550-1986 SPLINT, HAND (MASON-ALLEN)
DOD A-A-53077-1987 SPLINT, NASAL (BROWN STYLE)
DOD A-A-53475-1988 PLATINUM FOIL (1 PENNYWEIGHT)
DOD A-A-54471-1991 SPLINT, WIRE (MALLEABLE ALUMINUM)
DOD A-A-51430-1986 SPLINT SET, ARCH WIRE, DENTAL AND BAND, LIGATURE, DENTAL

Society of Automotive Engineers (SAE)

SAE AS1960/3-1986 Flange, Sheet Metal
SAE AMS2634-2011 ULTRASONIC INSPECTION Thin Wall Metal Tubing
SAE AMS2634B-2019 Ultrasonic Inspection Thin Wall Metal Tubing
SAE AMS2634A-1995 ULTRASONIC INSPECTION Thin Wall Metal Tubing
SAE AMS2634C-2022 Ultrasonic Inspection Thin Wall Metal Tubing
SAE AMS7850C-2002 Columbium (Niobium) Sheet, Strip, Plate, and Foil
SAE AMS2634B-1996 Ultrasonic Inspection Thin Wall Metal Tubing

American Society for Testing and Materials (ASTM)

ASTM A1004/A1004M-99(2014) Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members
ASTM A924/A924M-22a Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
ASTM B793-01 Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds
ASTM B388-06(2018) Standard Specification for Thermostat Metal Sheet and Strip
ASTM B388-06(2012) Standard Specification for Thermostat Metal Sheet and Strip
ASTM B388-06 Standard Specification for Thermostat Metal Sheet and Strip
ASTM B388-00 Standard Specification for Thermostat Metal Sheet and Strip
ASTM B793-91(1996) Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds
ASTM B793-15 Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds
ASTM B793-98e1 Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds
ASTM B793-16(2021) Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds
ASTM B793-08 Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds
ASTM F390-98(2003) Standard Test Method for Sheet Resistance of Thin Metallic Films With a Collinear Four-Probe Array

German Institute for Standardization

DIN 24192:1985 Ducting for ventilation equipment; joints for sheet metal ducting and sheet metal ducting components
DIN 2032:1987 Metal packages; screwed closures of light gauge metal
DIN 24192 Bb.1:1985 Ducting for ventilation equipment; joints for sheet metal ducting and sheet metal ducting components; examples of light joint constructions
DIN EN 504:2000 Roofing products from metal sheet - Specification for fully supported roofing products from copper sheet; German version EN 504:1999
DIN EN 507:2000 Roofing products from metal sheet - Specification for fully supported roofing products of aluminium sheet; German version EN 507:1999

Association Francaise de Normalisation

NF H31-401*NF EN 13026:2001 Packaging - Light-gauge metal packaging - Nominal filling volumes for non-round, cylindrical and tapered general use metal containers up to 30000 ml
NF D35-302:1950 Smoke pipes and bends made of metal sheet.
NF A50-443:1997 Aluminium and aluminium alloys. Foils. Part 4 : special property requirements.
NF P34-308:2000 Roofing products from metal sheet - Specification for fully supported roofing products of aluminium sheet.

CZ-CSN

CSN 94 6003 Z1-1995 Aluminum thin metal sheets and wires. technical regulations
CSN 22 6101-1986 Sheet-metal shears. Basic regulations
CSN 16 0290-1977 Thin sheet metal canisters. Technical regulations
CSN ON 88 2240-1967 Film printed two metal foils
CSN 77 0520-1984 Determination of the volumes of thin sheet metal packages
CSN 22 6387-1968 Pressing tools. Broaches for holes in metal sheets without pre-piercing
CSN 22 6386-1968 Pressing tools. Broaches for holes in metal sheets with pre-piercing
CSN 02 3497-1989 Plain bearings Bimetallic thin-walled liners Dimensions
CSN ISO 565:1994 Test sieves. Metal wire cloth, performated metal and elctroformed sheet. Nominal size of openings
CSN 16 2341-1993 Light gauge metal containers. Metal cylindrical and conical pails with press-on or press-in lid

GB-REG

REG NACA-TM-605-1931 Flat Sheet Metal Girders With Very Thin Metal Web
REG NACA-TM-606-1931 Flat Sheet Metal Girders With Very Thin Metal Web
REG NACA-TM-604-1931 Flat Sheet Metal Girdes With Very Thin Metal Web
REG NACA-TM-490-1928 Structures of Thin Sheet Metal Their Design and Construction

RO-ASRO

STAS 5470-1974 Metal packages THIN SHEET DRUMS
STAS 7683-1988 METAL PACKAGES PICKLED SHEET DRUMS
STAS 11258-1985 BIMETAL STRIP FOR PLAIN BEARINGS WITH THIN WALLS
STAS SR ISO 7807:1995 Air distribution - Straight circular sheet metal ducts with a lock type spiral seam and straight rectangular sheet metal ducts - Dimensions
STAS 10888-1977 Tests of metals TESTS OF CORNER WELDED JOINTS FOR THIN SHEETS

United States Navy

NAVY UFGS-07 60 00-2008 FLASHING AND SHEET METAL
NAVY QPL-AMS-A-25463-1-2010 ADHESIVE, FILM FORM, METALLIC STRUCTURAL, SANDWICH CONSTRUCTION

Indonesia Standards

SNI 06-2996-1992 PVC film for metal coating
SNI 7387-2009 Maximum limits for heavy metal contamination in food
SNI 07-4606-1998 Modified Erichsen cupping test for metallic material sheets and strips

American National Standards Institute （ANSI)

ANSI/AWS D9.1M/D9.1:2012 Sheet Metal Welding Code
ANSI/EIA 376-1:1971 Fixed Film Dielectric Capacitors in Metallic and Non-Metallic Cases for DC Application
ANSI/EIA 376:1970 Fixed Film Dielectric Capacitors in Metallic and Non-Metallic Cases for DC Application
ANSI/ASTM E643:1984 Test Method for Ball Punch Deformation of Metallic Sheet Material
ANSI/ASTM E517:2000 Test Method for Plastic Strain Ratio R for Sheet Metal

SE-SIS

SIS SS 11 26 23-1983 Metallic materials - Strip. Sheet - Reverse bend test
SIS SMS 1545-1952 Bearing lock, the final lock on metal plates
SIS SS 2609-1987 Ventilating plants - Straight circular metal ducts with a lock type spiral seam and straight rectangular sheet metal ducts - Dimensions
SIS SS 27 11 14-1986 Metal sheet jointing — Determination of shearing strength

American Welding Society (AWS)

AWS D9.1M/D9.1-2006 Sheet Metal Welding Code

AASHTO - American Association of State Highway and Transportation Officials

DIVISION I 10.8-1996 Minimum Thickness of Metal (Interim 2000)

Association of German Mechanical Engineers

DVS 1134-1997 DVS Course-Sheet Metal Welding
DVS 2945-2006 DVS® Courses Experts in Sheet Metal Joint Testing
DVS 2946-2007 DVS® Courses Experts in Sheet Metal Joint Testing

Defense Logistics Agency

DLA DSCC-DWG-89028 REV B-2006 CAPACITORS, FIXED, METALLIZED FILM OR METALLIZED PAPER AND POLYESTER FILM, DIELECTRIC, HERMETICALLY SEALED
DLA A-A-50553 A-2005 FITTING FOR CONDUIT, METAL (THICK-WALL (RIGID) AND THIN-WALL (EMT) TYPE)

Korean Agency for Technology and Standards (KATS)

KS C 2212-2002(2017) Metallized polyester film for capacitors
KS C 2212-1987 Metallized polyester film for capacitors
KS C 2370-2002 METALLIZED POLYESTER FILM FOR CAPACITORS
KS B ISO 10113:2015 Metallic materials－Sheet and strip－Determination of plastic strain ratio
KS C 2212-2002(2022) Metallized polyester film for capacitors
KS C 2212-2022 Metallized polyester film for capacitors
KS B ISO 10113:2004 Metallic materials-Sheet and strip-Determination of plastic strain ratio
KS I ISO 7807:2008 Air distribution-Straight circular sheet metal ducts with a lock type spiral seam and straight rectangular sheet metal ducts-Dimensions
KS C 6425-2002 METALLIZED PLASTIC FILM CAPACITORS FOR AC
KS B ISO 10275-2009(2017) Metallic materials－Sheet and strip－Determination of tensile strain hardening exponent

Electronic Components, Assemblies and Materials Association

ECA 376-1970 Fixed Film Dielectric Capacitors in Metallic and Non-Metallic Cases for D.C. Application ANSI C83.61-71
ECA 456-A-1989 Metallized Film Dielectric Capacitors for Alternating Current Application

General Motors Corporation (GM)

GM 9984184-1991 Dry Film Lubricant Type for Sheet Metal

GSO

GSO IEC 60740-2:2014 Laminations for transformers and inductors for use in telecommunication and electronic equipment - Part 2: Specification for the minimum permeabilities of laminations made of soft magnetic metallic materials
OS GSO ISO 16630:2010 Metallic materials -- Sheet and strip -- Hole expanding test

HU-MSZT

MSZ KGST 1253-1978 Final inspection of powder metallurgy hard metal wire
MSZ KGST 1252-1978 Final inspection of powder metallurgy hard metal wire
MSZ 437-1983 Thin-walled, bimetal bearing bowl specifications

U.S. Military Regulations and Norms

ARMY A-A-52167 A-1998 FIBER METAL, SHEET, NICKEL BASE, UNBACKED

AENOR

UNE 16321:1975 THIN STRAIGHT WHEELS FOR METALS SAWS GRINDING.

European Committee for Standardization (CEN)

EN ISO 10275:2020 Metallic materials - Sheet and strip - Determination of tensile strain hardening exponent (ISO 10275:2020)
EN ISO 10113:2020 Metallic materials - Sheet and strip - Determination of plastic strain ratio (ISO 10113:2020, Corrected version 2020-11)
EN ISO 10275:2014 Metallic materials - Sheet and strip - Determination of tensile strain hardening exponent
EN ISO 10511:2012 Prevailing torque type hexagon thin nuts (with non-metallic insert) (ISO 10511:2012)

International Organization for Standardization (ISO)

ISO 7807:1983 Air distribution; Straight circular sheet metal ducts with a lock type spiral seam and straight rectangular sheet metal ducts; Dimensions
ISO 1361:1997 Light-gauge metal containers - Round open-top cans - Internal diameters
ISO 1361:1977 Title missing - Legacy paper document
ISO 1361:1972 Title missing - Legacy paper document
ISO 11531:2022 Metallic materials — Sheet and strip — Earing test
ISO 11944:1993 Round general use light gauge metal containers — Nominal diameters for cylindrical and tapered cans up to 10 000 ml capacity

SCC

BS 485-1:1933 Tensile tests on thin metal sheet and strip
HOLDEN HN 1091-2009 UNSUPPORTED VINYL METALLISED MYLAR
AS 1123:1972 Preferred metric sizes of wrought ferrous and non-ferrous sheet andstrip

AT-ON

ONORM H 6015-2-2001 Ventilation and air conditioning plants - Sheetmetal ductwork - Rectangular ducts and fittings of sheet metal - Requirements, dimensions
ONORM H 6015-1-2001 Ventilation and air conditioning plants - Sheetmetal ductwork - Circular spirally wound sheet metal ducts and fittings - Requirements, dimensions

CO-ICONTEC

ICONTEC 6-1992 Steel industry, carbon steel metal sheets and carbon steel hoops (carbon content max. 0,15% high temperature rolling), commercial quality
ICONTEC 1548-1980 Non-ferrous metals, finished copper and copper alloy machine-made sheets, related mechanical properties

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TM-650 2.4.8.1-1986 Peel Strength, Metal Foil (Keyhole Method for Thin Laminates)

RU-GOST R

GOST 11701-1984 Metals. Methods of tensile testing of thin sheets and strips

Aerospace Industries Association

AIA NAS 956-1963 Tube Bender - Numerical Control, Precision Aircraft Type for Thin Wall, Ferrous and Non- Ferrous Alloys

British Standards Institution (BSI)

BS EN 508-1:2008 Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Steel
BS ISO 11531:2015 Metallic materials. Sheet and strip. Earing test

GM North America

GM GM9617P-1988 Corrosion Test for Sheet Metal Forming Lubricants

ECIA - Electronic Components Industry Association

456-A-1989 Metallized Film Dielectric Capacitors for Alternating Current Application

YU-JUS

JUS M.C3.366-1988 Plain bearings. Metallic thin-walled half bearings. Determination of the R0，01

GM Daewoo

GMKOREA EDS-T-7189-2003 Plastic strain ratio test method for thin metal materials

European Association of Aerospace Industries

AECMA PREN 4250-2001 Aerospace Series Nickel Base Alloy NI-B41001 Filler Metal for Brazing Amorphous Foil Edition P 2

VN-TCVN

TCVN 7209-2002 Soil quality.Maximum allowable limits of heavy metals in the soil