GB/T 2423.2-2008 in English
VALIDEnvironmental testing - Part 2: Test methods - Tests B: Dry heat
- Issued on:2008-12-30
- Implemented on:2009-10-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$78.00
《GB/T 2423.2-2008电工电子产品环境试验 第2部分:试验方法 试验B:高温》由TC8(全国电工电子产品环境条件与环境试验标准化技术委员会)归口,TC8SC2(全国电工电子产品环境条件与环境试验标准化技术委员会气候环境试验分会)执行,主管部门为中国电器工业协会。
1 Scope
This part of GB/T 2423 deals with dry heat tests applicable both to heat-dissipating and non heat-dissipating specimens. For non heat-dissipating specimens, Tests Bb and Bd do not deviate essentially from earlier issues1).
The object of the dry heat test is limited to the determination of the ability of components, equipment or other articles to be used, transported or stored at high temperature.
These dry heat tests do not enable the ability of specimens to withstand or operate during the temperature variations to be assessed. In this case, it would be necessary to use GB/T 2423.22.
The dry heat tests are subdivided as follows:
- Dry heat test for non heat-dissipating specimens:
• with gradual change of temperature, Bb.
- Dry heat tests for heat-dissipating specimens
• with gradual change of temperature, Bd;
• with gradual change of temperature, specimen powered throughout, Be.
The procedures given in this part are normally intended for specimens that achieve temperature stability during the performance of the test procedure.
2 Normative References
The following normative documents contain provisions which, through reference in this part of GB/T 2423, constitute provisions of this standard. For dated reference, subsequent amendments (excluding corrections) to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative document referred to applies.
Contents
1 Scope
2 Normative References
3 Terms and Definitions
4 Application of Tests for Non Heat-dissipating Specimens Versus Tests for Heat-dissipating Specimens
5 Test Descriptions
6 Test Procedure
7 Information to be Given in the Relevant Specification
8 Information to be Given in the Test Report
Appendix NA (Informative) Constituent Parts of GB/T
Appendix NB (Informative) Relationship Between Lowercase Letters of Classification Codes for Test A: Cold Test B: Dry Heat

Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-

GB/Z 179-2026 in English
Damp heat, steady state (unsaturated pressurized vapour with air)
2026-07-02 -

GB/T 5170.22-2024 in English
Inspection methods environmental testing equipment—Part 22:The equipment for acoustic vibration test in reverberation field
2024-09-29 -

GB/T 29309-2012 in English
Accelerated stress testing procedures for electric and electronic products—Guidance for highly accelerated life test
2012-12-31 -

GB/T 2423.10-2019 in English
Environmental testing—Part 2:Test methods—Test Fc: Vibration (sinusoidal)
2019-06-04 -

GB/T 4797.2-2017 in English
Classification of environmental conditions―Environmental conditions appearing in nature―Air pressure
2017-12-29 -

GB/T 37143-2018 in English
Maturity testing for electric and electronic products
2018-12-28 -

GB/T 11804-2005 in English
Encironmental condition for electric and electronic products - Terminologies
2005-03-03 -

GB/T 5170.1-2016 in English
Inspection methods for environmental testing equipments for electric and electronic products―Part 1:General
2016-12-13