Environmental testing - Part 2: Test methods Test Ec: Shock caused by rough handling

Environmental testing - Part 2: Test methods Test Ec: Shock caused by rough handling, Total:360 items.

The international standard classification for "Environmental testing - Part 2: Test methods Test Ec: Shock caused by rough handling" includes: Test conditions and procedures in general , Environmental testing , Aircraft and space vehicles in general , Electrical and electronic testing , Power transmission and distribution lines .

The Chinese standard classification for "Environmental testing - Part 2: Test methods Test Ec: Shock caused by rough handling" includes: Basic standards and general methods , Environmental Condition and General Test Method , Micro and copier machinery .

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 2423.18-2021 Environmental testing—Part 2: Test methods—Test Kb:Salt mist, cyclic（sodium chloride solution）
GB/T 2423.51-2020 Environmental testing—Part 2: Test methods—Test Ke: Flowing mixed gas corrosion test
GB/T 2423.39-2018 Environmental testing—Part 2:Test methods—Test Ee and guidance:Loose cargo testing including bounce
GB/T 32065.11-2021 Environmental test methods for oceanographic instruments—Part 11：Shock and bump test
GB/T 2423.47-2018 Environmental testing—Part 2:Test methods—Test Fg:Acoustic vibration
GB/T 2423.61-2018 Environmental testing—Part 2:Test methods—Test and guidance:Dust and sand test for large specimen
GB/T 38924.5-2020 Environmental test methods for civil small and light unmanned aircraft system—Part 5: Shock test
GB/T 2423.38-2021 Environmental testing-Part 2:Test methods-Test R:Water test method and guidance
GB/T 2423.7-2018 Environmental testing—Part 2:Test methods—Test Ec:Rough handling shocks,primarily for equipment-type specimens
GB/T 2423.33-2021 Environmental testing - Part 2: Test methods - Test Kca: High concentration sulfur dioxid
GB/T 2423.10-2019 Environmental testing—Part 2:Test methods—Test Fc: Vibration (sinusoidal)

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 2423.56-2018 Environmental testing—Part 2:Test methods—Test Fh:Vibration, broadband random and guidance
GB/T 2423.54-2005 Environmental testing for electric and electronic products - Part 2: Test methods - Test Xc: Fluid contamination
GB/T 2423.37-2006 Environmental testing for electric and electronic products - Part 2: Test methods - Test L: Dust and sand
GB/T 2423.45-2012 Environmental testing - Part 2: Test methods - Test Z/ABDM: Climatic sequence
GB/T 2423.53-2005 Environmental testing for electric and electronic products - Part 2: Test methods Test Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands
GB/T 2423.45-1997 Environmental testing for electric and electronic products - Part 2: Test methods Test Z/ABDM: Climatic sequence
GB/T 2423.34-2024 Environmental testing—Part 2:Test methods—Test Z/AD: Composite temperature/humidity cyclic test
GB/T 2423.55-2023 Environmental testing—Part 2:Test methods—Test Eh: Hammer tests
GB/T 2423.2-2001 Environmental testing for electric and electronic products--Part 2:Test methods--Tests B:Dry heat
GB/T 2423.19-2013 Environmental testing—Part 2:Test methods—Test Kc:Sulphur dioxide test for contacts and connections
GB/T 2423.17-2008 Envrionmental testing for electric and electronic products - Part 2: Test method - Test Ka: Salt mist
GB/T 2423.54-2022 Environmental testing—Part 2: Test methods—Test Xc: Fluid contamination
GB/T 2423.43-2008 Environmental testing for electric and electronic products - Part 2: Test methods - Mounting of specimens for vibration impact and similar dynamic tests
GB/T 2423.16-2022 Environmental testing—Part 2: Test methods—Test J and guidance: Mould growth
GB/T 2423.41-2013 Environmental testing—Part 2:Test methods—Wind pressure
GB/T 2423.23-2013 Environmental testing - Part 2：Test methods - Test Q: Sealing
GB/T 2423.57-2008 Environmental testing for electric and electronic products - Part 2: Tests - Test Ei: Shock - Shock response spectrum synthesis
GB/T 2423.64-2023 Environmental testing—Part 2:Test methods—Test Fj: Vibration—Long time history replication
GB/T 2423.39-2008 Environmental testing for electric and electronic products - Part 2: Test methods - Test Ee: Bounce
GB/T 2423.47-1997 Environmental testing for electric and electronic products Part 2: Test methods Test Fg: Vibration, acoustically induced
GB/T 2423.3-2006 Environmental testing for electric and electronic products - Part 2: Testing method test Cab: Damp heat Steady state
GB/T 2423.10-2008 Environmental testing for electric and electronic products - Part 2: Tests methods - Test Fc: Vibration (sinusoidal)
GB/T 2423.20-2014 Environmental testing—Part 2:Test methods—Test Kd:Hydrogen sulphide test for contacts and connections
GB/T 2423.34-2012 Environmental testing - Part 2: Test methods - Test Z/AD: Composite temperature/humidity cyclic test
GB/T 2423.5-2019 Environmental testing—Part 2:Test methods—Test Ea and guidance:Shock
GB/T 2423.55-2006 Environmental testing for electric and electronic products - Part 2: Test methods - Test Eh: hammer tests
GB/T 2423.17-2024 Environmental testing—Part 2: Test methods—Test Ka: Salt mist
GB/T 2423.2-2008 Environmental testing - Part 2: Test methods - Tests B: Dry heat
GB/T 2423.22-2012 Environmental testing - Part 2: Tests methods - Test N: Change of temperature
GB/T 2423.38-2008 Environmental testing for electric and electronic products - Part 2: Test methods - Test R: Water test method and guidance
GB/T 2423.1-2008 Environmental testing - Part 2: Test methods - Tests A: Cold
GB/T 2423.38-2005 Environmental testing for electric and electronic products Part 2: Test methods Test R: Water test methods and guidelines
GB/T 2423.21-2008 Environmental testing - Part 2: Test methods - Test M: Low air pressure
GB/T 2423.18-2012 Environmental testing - Part 2: Test methods - Test Kb: Salt mist, cyclic (sodium chloride solution)
GB/T 5170.20-2022 Inspection methods for environmental testing equipments—Part 20：Water testing equipments
GB/T 2423.51-2012 Environmental testing - Part 2: Test methods - Test Ke: Flowing mixed gas corrosion test
GB/T 2423.101-2008 Environmental testing for electric and electronic products - Part 2: Test methods - Test: inclinations and swings
GB/T 2424.17-2008 Environmental testing - Part 2: Tests methods guidance on - Test T: Soldering Test
GB/T 2423.5-1995 Environmental testing for electric and electronic products Part 2:Test methods Test Ea and guidance:Shock
GB/T 5170.2-2017 Inspection methods for environmental testing equipments―Part 2:Temperature testing equipments
GB/T 2423.1-2001 Environmental testing for electric and electronic and electronic products--Part 2:Test methods--Tests A:Cold
GB/T 2423.8-1995 Environmental testing for electric and electronic products Part 2:Test methods Test Ed:Free fall
GB/T 2423.28-2005 Basic environmental testing procedures for electric and electronic products - Part2: Test methods - Test T: Soldering
GB/T 2423.56-2023 Environmental testing—Part 2:Test methods—Test Fh:Vibration, broadband random and guidance

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 2423.3-2016 Environmental testing―Part 2:Testing method―Test Cab:Damp heat,steady state
GB/T 32065.2-2015 Environmental test methods for oceanographic instruments―Part 2:Cold

Military Standard of the People's Republic of China-General Armament Department

GJB 595.7-1988 Environmental testing methods for artillery optical instruments Impact testing
GJB 150.5A-2009 Laboratory environmental test methods for military materiel -Part 5:Temperature shock test
GJB 150.18A-2009 Laboratory environmental test methods for military materiel - Part 18: Shock test
GJB 150.18-1986 Environmental testing methods for military equipment Impact testing
GJB 150.5-1986 Environmental test methods for military equipment Temperature shock test
GJB 150.29-2009 Laboratory environmental test methods for military materiel - Part 29: Ballistic shock test
GJB 150.27-2009 Laboratory environmental test methods for military materiel - Part 27: Pyroshock test
GJB 573.15-1988 Fuze environment and performance test methods Rough loading and unloading test
GJB 573.8-1988 Fuze environment and performance test methods Thermal shock test
GJB 797.10-1990 Environmental test methods for landmine blasting equipment impact testing

Professional Standard - Machinery

JB/T 9444.8-1999 Basic Environmental Testing Method of Copying Machines - Test Ec: Free Drop Test
JB/T 9444.6-1999 Basic Environmental Testing Method of Copying Machines - Test Ea: Bump Test

Taiwan Provincial Standard of the People's Republic of China

CNS 11234-1990 Basic Environmental Testing Procedures - Part 2 : Tests, Test Ea : Shock
CNS 14969-2-75-2006 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests

未注明发布机构

DIN EN 60068-2-78:2002 Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
DIN EN 60068-2-2:1994 Environmental testing - Part 2-2: Tests - Test B: Dry heat

工业和信息化部

JB/T 13702.3-2019 Environmental testing for cameras. Part3:Shock test

Professional Standard - Ocean

HY 016.12-1992 The basic method of environmental test for oceanographic instruments—Shock test

Group Standards of the People's Republic of China

T/SZUAVIA 009.9-2019 Laboratory environmental test methods for unmanned aircraft systems with multi-rotors Part 9: Shock test

Professional Standard - Electron

SJ/Z 9001.23-1987 Basic environmental testing procedures--Part 2: Tests--Test Ea: Shock

Korean Agency for Technology and Standards (KATS)

KS C IEC 60068-2-31:2014 Environmental testing — Part 2-31: Tests — Test Ec: Rough handling shocks, primarily for equipment-type specimens
KS C 0239-1995(2015) Environmental testing Part 2:Test methods Test Eg:Impact, spring hammer.
KS C IEC 60068-2-31-2019 Environmental testing — Part 2-31: Tests — Test Ec: Rough handling shocks, primarily for equipment-type specimens
KS C IEC 60068-2-81:2005 Environmental testing－Part 2－81：Tests－Test Ei：Shock－Shock response spectrum synthesis
KS C IEC 60068-2-75:2017 Environmental testing－Part 2：Tests－Test Eh：Hammer tests
KS C IEC 60068-2-75:2010 Environmental testing-Part 2:Tests-Test Eh:Hammer tests
KS C IEC 60068-2-27-2017(2022) Environmental testing－Part 2：Tests－Test Ea and guidance：Shock
KS C 0241-1998(2008) Basic environmental testing procedures Part 2 : Tests Test Ea and guidance : Shock
KS C IEC 60068-2-27:2010 Environmental testing－Part 2：Tests－Test Ea and guidance：Shock
KS C IEC 60068-2-27:2017 Environmental testing－Part 2：Tests－Test Ea and guidance：Shock
KS C IEC 60068-2-77-2012(2022) Environmental testing－Part 2-77：Tests－Test 77：Body strength and impact shock
KS C IEC 60068-2-77-2012(2017) Environmental testing－Part 2-77：Tests－Test 77：Body strength and impact shock
KS C 0243-2001(2011) Environmental testing Part 2：Tests－Test Ec： Drop and topple, primarily for equipment－type specimens
KS C IEC 60068-2-70:2020 Environmental Testing — Part 2-70: Tests Xb: abrasion of markings and letterings caused by rubbing of fingers and hands
KS C IEC 60068-2-61:2010 Environmental testing－Part 2：Test methods－Test Z/ABDM：Climatic sequence
KS C 0221-1999(2009) Basic environmental testing procedures Part 2：Tests, Tests B：Dry heat
KS C 0248-59-2001(2016) Environmental testing－Part 2：Test methods－ Test Fe : Vibration－Sine-beat method
KS C IEC 60068-2-77:2012 Environmental testing－Part 2-77：Tests－Test 77：Body strength and impact shock
KS C IEC 60068-2-65:2003 Environmental testing-Part 2:Methods of test-Test Fg:Vibration, acoustically induced
KS C IEC 60068-2-2:2014 Environmental testing — Part 2-2: Tests — Test B: Dry heat
KS C IEC 60068-2-11:2014 Environmental testing — Part 2: Tests — Test Ka: Salt mist
KS C IEC 60068-2-75-2017(2022) Environmental testing－Part 2：Tests－Test Eh：Hammer tests
KS C IEC 60068-2-1-2010(2020) Environmental testing－Part 2-1：Tests－Test A：Cold
KS C IEC 60068-2-68:2003 Environmental testing-Part 2:Tests-Test L:Dust and sand
KS C 0283-2016 Environmental testing part 2 : Tests-Guidance for damp heat tests
KS C IEC 60068-2-1:2010 Environmental testing－Part 2-1：Tests－Test A：Cold
KS B ISO 10263-2-2012(2017) Earth-moving mahcinery－Operator enclosure environment－ Part 2：Air filter element test method
KS C IEC 60068-2-20:2007 Environmental testing-Part 2-20:Tests-Test T:Soldering
KS C 0241-1998 Basic environmental testing procedures Part 2 : Tests Test Ea and guidance : Shock
KS C IEC 60068-2-47:2010 Environmental testing－Part 2-47：Tests－Mounting of specimens for vibration, impact and similar dynamic tests
KS C IEC 60068-2-47-2010(2020) Environmental testing－Part 2-47：Tests－Mounting of specimens for vibration, impact and similar dynamic tests
KS C 0244-2001(2011) Environmental testing Part 2：Tests－Test Ed：Free fall
KS C IEC 60068-2-20:2015 Environmental testing－Part 2－20：Tests－Test T：Soldering
KS C IEC 60068-2-47-2020 Environmental testing－Part 2-47：Tests－Mounting of specimens for vibration, impact and similar dynamic tests
KS C IEC 60068-2-82-2012(2017) Environmental testing－Part 2-82：Tests－Test Tx：Whisker test methods for electronic and electric components
KS C IEC 60068-2-65:2019 Environmental testing — Part 2-65: Tests — Test Fg: Vibration — Acoustically induced method
KS C IEC 60068-2-18:2010 Environmental testing－Part 2-18：Tests－Test R and guidance：Water
KS C IEC 60068-2-82:2021 Environmental testing — Part 2-82: Tests — Test Xw1: Whisker test methods for components and parts used in electronic assemblies
KS C IEC 60068-2-31-2014(2019) Environmental testing — Part 2-31: Tests — Test Ec: Rough handling shocks, primarily for equipment-type specimens
KS C IEC 60068-2-13:2014 Environmental testing — Part 2-13: Tests — Test M: Low air pressure
KS C IEC 60068-2-74:2002 Environmental Testing Part 2：Tests－Test Xc：Fluid contamination
KS C IEC 60068-2-74-2002(2017) Environmental Testing Part 2：Tests－Test Xc：Fluid contamination
KS C IEC 60068-2-55:2002 Environmental testing－Part 2：Tests－Test Ee and guidance：Bounce
KS C IEC 60068-2-13:2022 Environmental testing — Part 2-13: Tests —Test M: Low air pressure
KS B ISO 10263-2-2012(2022) Earth-moving mahcinery－Operator enclosure environment－ Part 2：Air filter element test method
KS C IEC 60068-2-74:2021 Environmental testing — Part 2-74: Tests — Test Xc:Fluid contamination
KS C 0220-1999(2009) Environmental testing procedures Part 2：Tests, Tests A：Cold

SCC

05/30138375 DC IEC 60068-2-31 ED 2. Basic environmental testing procedures. Part 2-31. Tests. Test Ec. Rough handling shocks, primarily for equipment-type specimens
DANSK DS/EN 60068-2-31:2008 Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens
CEI EN 60068-2-31:2011 Environmental testing Part 2: Tests - Test Ec: Rough handling shocks, primarily for equipmenttype specimens
AENOR UNE-EN 60068-2-31:2009 Environmental testing — Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens
BS EN 60068-2-27:1988 Environmental testing. Part 2: Tests. Test Ea and guidance: Shock
DANSK DS/EN 60068-2-77:2000 Environmental testing - Part 2-77: Tests - Test 77: Body strength and impact shock
CEI EN 60068-2-77:2001 Environmental testing - Part 2-77: Tests - Body strength and impact shock
BS EN 60068-2-62:1996 Environmental testing. Test methods-Test Ef. Impact, pendulum hammer
BS EN 60068-2-63:1995 Environmental testing. Test methods-Test Eq: Impact, spring hammer
UNE-EN 60068-2-65:1997 ENVIRONMENTAL TESTING. PART 2: METHODS OF TEST. TEST FG: VIBRATION, ACOUSTICALLY INDUCED.
NS-EN 12046-2:2000 Operating forces — Test method — Part 2: Doors
UNE-EN 60068-2-1/A2:1996 ENVIRONMENTAL TESTING. PART 2: TESTS. TESTS A: COLD.
CEI EN 60068-2-59:1998 Environmental testing - Part 2: Tests - Test Fe: Vibration - Sine-beat method
CEI EN IEC 60068-2-17:2024 Environmental testing - Part 2-17: Tests - Test Q: Sealing
DANSK DS/EN 60068-2-82:2007 Environmental testing – Part 2-82: Tests – Test Tx: Whisker test methods for electronic and electric components
DANSK DS/EN IEC 60068-2-17:2023 Environmental testing – Part 2-17: Tests – Test Q: Sealing
05/30133273 DC IEC 60068-2-82. Environmental testing. Part 2-82. Test. Test Tx. Whisker test methods for electronic and electric components
UNE-EN 60068-2-1:1996 ENVIROMENTAL TESTING. PART 2: TESTS. TESTS A: COLD.
UNE-EN 60068-2-1/A1:1996 ENVIROMENTAL TEST. PART 2: TESTS. TESTS A: COLD.
CEI EN 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
ASD-STAN prEN 2003-002:1970 Steels - Test methods - Part 2 : IZOD impact test
UNE-EN 60068-2-6:1996 ENVIRONMENTAL TESTING. PART 2: TESTS. TESTS FC: VIBRATION (SINUSOIDAL).
UNE 115230-3:1999 EARTH-MOVING MACHINERY. OPERATOR ENCLOSURE ENVIRONMENT. PART 3: OPERATOR ENCLOSURE PRESSURIZATION TEST METHOD.
CEI EN IEC 60068-2-14:2024 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
UNE-EN 60068-2-33:2000 Environmental testing. Part 2: Tests. Guidance on change of temperature tests.
UNE-EN 60068-2-31:1996 BASIC ENVIRONMENTAL TESTING PROCEDURES. PART 2: TESTS. TEST EC: DROP AND TOPPLE, PRIMARILY FOR EQUIPMENT-TYPE SPECIMENTS.

CENELEC - European Committee for Electrotechnical Standardization

EN 60068-2-31:1993 Basic Environmental Testing Procedures Part 2: Tests Test Ec: Drop and Topple@ Primarily for Equipment- Type Specimens
EN 60068-2-2:1993 Basic Environmental Testing Procedures Part 2: Tests Tests B : Dry Heat (Incorporates Amendment A1: 1993)
EN 60068-2-47:1993 Basic Environmental Testing Procedures Part 2: Tests Mounting of Components@ Equipment and Other Articles for Dynamic Tests Including Shock (Ea)@ Bump (Eb)@ Vibration (Fc and Fd) and Steady-State Acceleration (Ga) and Guidance
EN 60068-2-47:1999 Environmental Testing - Part 2-47: Test Methods - Mounting of Components@ Equipment and Other Articles for Vibration@ Impact and Similar Dynamic Tests
EN 60068-2-1:1993 Environmental Testing Part 2: Tests Tests A: Cold
EN 60068-2-38:1999 Environmental Testing - Part 2: Tests - Test Z/AD: Composite Temperature/Humidity Cyclic Test

International Electrotechnical Commission (IEC)

IEC 60068-2-31:2008 Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens
IEC 60068-2-81:2003 Environmental testing - Part 2-81: Tests; Test Ei: Shock; Shock response spectrum synthesis
IEC 60068-2-27:1987 Environmental testing. Part 2: Tests. Test Ea and guidance: Shock
IEC 60068-2-65:1993 Environmental testing; part 2: methods of test; test Fg; vibration, acoustically induced
IEC 60068-2-27:2008 Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
IEC 60068-2-62:1991 Environmental testing; part 2: test methods; test Ef: impact, pendulum hammer
IEC 60068-2-65:2013 Environmental testing - Part 2-65: Tests - Test Fg: Vibration - Acoustically induced method
IEC 60068-2-61:1991 Environmental testing; part 2: test methods; test Z/ABDM: climatic sequence
IEC 60068-2-63:1991 Environmental testing; part 2: test methods; test Eg: impact, spring hammer
IEC 60068-2-75:1997 Environmental testing - Part 2: Tests - Test Eh: Hammer tests
IEC 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
IEC 60068-2-47:2005 Environmental testing - Part 2-47: Test - Mounting of specimens for vibration, impact and similar dynamic tests
IEC 60068-2-59:1990 Environmental testing; part 2: tests methods; test Fe: vibration; sine-beat method
IEC 60068-2:2024 SER Environmental testing - Part 2: Tests - ALL PARTS
IEC 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
IEC 60068-2-44:1995/COR1:1995 Environmental testing - Part 2: Tests; Guidance on test T: Soldering; Corrigendum 1
IEC 60068-2-13:1983 Environmental testing. Part 2: Tests. Test M: Low air pressure
IEC 60068-2-1:1990 Environmental testing; part 2: tests; tests A: cold
IEC 60068-2-57:1999 Environmental testing - Part 2-57: Tests - Test Ff: Vibration - Time-history method
IEC 60068-2-20:1979 Environmental testing. Part 2: Tests. Test T: Soldering
IEC 60068-2-82:2019 Environmental testing - Part 2-82: Tests - Test Xw1: Whisker test methods for components and parts used in electronic assemblies
IEC 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
IEC 60068-2-1/AMD2:1994 Environmental testing - Part 2: Tests - Test A: Cold; Amendment 2
IEC 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
IEC 60068-2-31:1969 Basic environmental testing procedures. Part 2 : Tests. Test Ec: Drop and topple, primarily for equipment-type specimens
IEC 60068-2-2:1974 Basic environmental testing procedures. Part 2 : Tests. Test B: Dry heat
IEC 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
IEC 60068-2-74:1999+AMD1:2018 CSV Environmental testing - Part 2-74: Tests - Test Xc: Fluid contamination
IEC 60068-2-6:1995 Environmental testing - Part 2: Tests - Test Fc: Vibration (sinusoidal)
IEC 60068-2-13:2021 Environmental testing - Part 2-13: Tests - Test M: Low air pressure
IEC 60068-2-74:1999 Environmental testing - Part 2: Tests - Test Xc: Fluid contamination
IEC 60068-2-78:2001 Environmental testing - Part 2-78: Tests; Test Cab: Damp heat, steady state
IEC 60068-2-9/AMD1/COR1:1989 Environmental testing. Part 2: Tests. Guidance for solar radiation testing
IEC 60068-2-18:2000 Environmental testing - Part 2-18: Tests; Test R and guidance: Water
IEC 60068-2-6/COR1:1995 Environmental testing - Part 2: Tests - Test Fc: Vibration (sinusoidal)

AENOR

UNE-EN 60068-2-31:2009 Environmental testing -- Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens
UNE-EN 60068-2-81:2004 Environmental testing -- Part 2-81: Tests - Test Ei: Shock - Shock response spectrum synthesis
UNE-EN 60068-2-27:2011 Environmental testing -- Part 2-27: Tests - Test Ea and guidance: Shock
UNE-ISO 10263-3:2010 Earth-moving machinery -- Operator enclosure environment -- Part 3: Pressurization test method
UNE-EN 60068-2-14:2011 Environmental testing -- Part 2-14: Tests - Test N: Change of temperature

Japanese Industrial Standards Committee (JISC)

JIS C 60068-2-31:2013 Environmental testing.Part 2-31: Tests .Test Ec: Rough handling shocks, primarily for equipment-type specimens
JIS C 0046:1993 Environmental testing Part 2: Test methods Test Eg: Impact, spring hammer
JIS C 60068-2-27:2011 Environmental testing -- Part 2-27: Tests -- Test Ea: Shock
JIS C 60068-2-31:1995 Environmental testing Part 2: Tests. Test Ec: Drop and topple, primarily for equipment-type specimens
JIS C 0035:1996 Environmental testing Part 2: Test methods Test Z/ABDM: Climatic sequence
JIS C 60068-2-59:2001 Environmental testing -- Part 2: Test methods Test Fe: Vibration -- Sine-beat method
JIS C 0058:2002 Environmental testing -- Part 2-77: Tests -- Test 77: Body strength and impact shock
JIS C 60068-2-61:1996 Environmental testing Part 2: Test methods Test Z/ABDM: Climatic sequence
JIS C 0041:1995 Basic environmental testing procedures Part 2: Tests, Test Ea and guidance: Shock
JIS C 0043:1995 Environmental testing Part 2: Tests. Test Ec: Drop and topple, primarily for equipment-type specimens
JIS C 60068-2-2:2010 Environmental testing -- Part 2-2 : Tests -- Test B: Dry heat
JIS C 60068-2-27:1995 Basic environmental testing procedures Part 2: Tests, Test Ea and guidance: Shock
JIS C 0056:2001 Environmental testing -- Part 2: Test methods Test Fe: Vibration -- Sine-beat method
JIS C 60068-2-75:2004 Environmental testing -- Part 2-75: Tests -- Test Eh: Hammer tests
JIS C 60068-2-65:2019 Environmental testing -- Part 2-65: Tests -- Test Fg: Vibration -- Acoustically induced method
JIS C 60068-2-1:2010 Environmental testing -- Part 2-1: Tests -- Test A: Cold
JIS C 60068-2-82:2021 Environmental testing -- Part 2-82: Tests -- Test Xw1: Whisker test methods for components and parts used in electronic assemblies
JIS C 0026:1994 Basic environmental testing procedures Part 2: Test -- Test Q: Sealing
JIS C 0044:1995 Environmental testing Part 2: Tests. Test Ed: Free fall
JIS C 60068-2-75:2019 Environmental testing -- Part 2-75: Tests -- Test Eh: Hammer tests
JIS C 60068-2-32:1995 Environmental testing Part 2: Tests. Test Ed: Free fall
JIS C 60068-2-18:1996 Environmental testing Part 2: Tests -- Test R and guidance: Water
JIS C 60068-2-78:2004 Environmental testing -- Part 2-78: Tests -- Test Cab: Damp heat, steady state
JIS C 60068-2-14:2011 Environmental testing -- Part 2-14: Tests -- Test N: Change of temperature
JIS C 60068-2-6:1999 Environmental testing -- Part 2: Tests -- Test Fc: Vibration (sinusoidal)
JIS C 60068-2-28:1993 Environmental testing, Part 2: Tests -- Guidance for damp heat tests
JIS C 0033:1993 Environmental testing, Part 2: Tests -- Guidance for damp heat tests
JIS C 60068-2-1:1995 Environmental testing procedures Part 2: Tests, Tests A: Cold
JIS C 0023:1989 Basic environmental testing procedures Part 2: Tests -- Test Ka: Salt mist
JIS C 0024:2000 Environmental testing -- Part 2: Tests -- Test Kb: Salt mist, cyclic (sodium, chloride solution)
JIS C 0097:2001 Environmental testing -- Part 2: Tests -- Test Cy: Damp heat, steady state, accelerated test primarily intended for components
JIS C 60068-2-82:2009 Environmental testing -- Part 2-82: Tests -- Test XW1: Whisker test methods for electronic and electric components
JIS C 60068-2-78:2015 Environmental testing -- Part 2-78: Tests -- Test Cab: Damp heat, steady state
JIS C 60068-2-66:2001 Environmental testing -- Part 2: Test methods -- Test Cx: Damp heat, steady state (unsaturated pressurized vapour)
JIS C 60068-2-64:1997 Environmental testing Part 2: Test methods -- Test Fh: Vibration, broad-band random (digital control) and guidance

German Institute for Standardization

DIN EN 60068-2-31:2009 Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens (IEC 60068-2-31:2008); German version EN 60068-2-31:2008
DIN EN 60068-2-81:2004 Environmental testing - Part 2-81: Tests - Test Ei: Shock - Shock response spectrum synthesis (IEC 60068-2-81:2003); German version EN 60068-2-81:2003
DIN EN 60068-2-65:1995 Environmental testing - Part 2: Methods of test; test Fg: Vibration, acoustically induced (IEC 60068-2-65:1993); German version EN 60068-2-65:1994
DIN EN 60068-2-77:1999 Environmental testing - Part 2-77: Tests; test 77: Body strength and impact shock (IEC 60068-2-77:1999); German version EN 60068-2-77:1999
DIN EN 60068-2-61:1993 Environmental testing; part 2: test methods; test Z/ABDM: climatic sequence (IEC 60068-2-61:1991); German version EN 60068-2-61:1993
DIN EN 60068-2-2:2008 Environmental testing - Part 2-2: Tests - Test B: Dry heat (IEC 60068-2-2:2007); German version EN 60068-2-2:2007
DIN EN 60068-2-11:2000 Environmental testing - Part 2: Tests; test Ka: Salt mist (IEC 60068-2-11:1981); German version EN 60068-2-11:1999
DIN EN 60068-2-59:1995 Environmental testing - Part 2: Tests methods; test Fe: Vibration, sine beat method (IEC 60068-2-59:1990); German version EN 60068-2-59:1993
DIN EN 12046-2:2022 Operating forces - Test method - Part 2: Doors; German and English version prEN 12046-2:2022
DIN EN 60068-2-68:1997 Environmental testing - Part 2: Tests; test L: Dust and sand (IEC 60068-2-68:1994); German version EN 60068-2-68:1996
DIN EN 60068-2-75:1998 Environmental testing - Part 2: Tests; test Eh: Hammer tests (IEC 60068-2-75:1997); German version EN 60068-2-75:1997
DIN EN 60068-2-17:1995 Environmental testing - Part 2: Tests - Test Q: Sealing (IEC 60068-2-17:1994); German version EN 60068-2-17:1994
DIN EN 60068-2-13:2000 Environmental testing - Part 2: Tests; test M: Low air pressure (IEC 60068-2-13:1983); German version EN 60068-2-13:1999
DIN EN 60068-2-57:2000 Environmental testing - Part 2: Tests; test Ff: Vibration, time-history method (IEC 60068-2-57:1999); German version EN 60068-2-57:2000
DIN EN 60068-2-18:2001 Environmental testing - Part 2-18: Tests; Test R and guidance: Water (IEC 60068-2-18:2000); German version EN 60068-2-18:2001
DIN EN 60068-2-74:2000 Environmental testing - Part 2: Tests; test Xc: Fluid contamination (IEC 60068-2-74:1999); German version EN 60068-2-74:1999

Association Francaise de Normalisation

NF C20-731*NF EN 60068-2-31:2008 Environmental testing - Part 2-31 : tests - Test Ec : rough handling shocks, primarily for equipment-type specimens
NF EN 60068-2-31:2008 Essais d'environnement - Partie 2-31 : essais - Essai Ec : choc lié à des manutentions brutales, essai destiné en premier lieu aux matériels
NF C20-781*NF EN 60068-2-81:2004 Environmental testing - Part 2-81 : tests - Test Ei : shock - Shock response spectrum synthesis
NF C20-711*NF EN 60068-2-11:1999 Environmental testing. Part 2 : tests. Test Ka : salt mist.
NF C20-711*NF EN IEC 60068-2-11:2021 Environmental testing - Part 2-11 : tests - Test Ka : salt mist
NF C20-713*NF EN 60068-2-13:1999 Environmental testing. Part 2 : tests. Test M : low air pressure.
NF C20-713*NF EN IEC 60068-2-13:2021 Environmental testing - Part 2-13 : tests - Test M : low air pressure
NF C20-721:1998 Environmental testing. Part 2 : tests. Test U : robustness of terminations and integral mounting devices.
NF C20-731:1994 Basic environmental testing procedures. Part 2 : tests. Test Ec : drop and topple, primarily for equipment-type specimens.
NF C20-777*NF EN 60068-2-77:2001 Environmental testing - Pat 2-77 : tests - Test 77 : body strength and impact shock
NF C20-729:1994 Basic environmental testing procedures. Part 2 : tests. Test Eb and guidance : bump.
NF C20-727:1994 Basic environmental testing procedures. Part 2 : tests. Test Ea and guidance : shock.
NF P20-532*NF EN 12046-2:2000 Operating forces - Test method - Part 2 : doors
NF C20-700-2-65*NF EN 60068-2-65:2013 Environmental testing - Part 2-65 : tests - Test Fg : vibration - Acoustically induced method
NF C20-717*NF EN 60068-2-17:1995 Environmental testing. Part 2 : tests. Test Q : sealing.
NF C20-701/A2:1995 Environmental testing - Part 2 : tests - Tests A : cold.
NF C20-761*NF EN 60068-2-61:1994 Environmental testing. Part 2 : test methods. Test Z/ABDM : climatic sequence.
NF C20-738*NF EN IEC 60068-2-38:2021 Environmental testing - Part 2-38 : tests - Test Z/AD : composite temperature/humidity cyclic test
NF C20-738*NF EN 60068-2-38:2010 Environmental testing - Part 2-38 : tests - Test Z/AD : composite temperature/humidity cyclic test.
NF C20-759:1994 Environmental testing. Part 2 : test methods. Test Fe : vibration sine beat method.
NF C20-768*NF EN 60068-2-68:1998 Environmental testing. Part 2 : tests. Test L : dust and sand.
NF C20-765:1998 Environmental testing. Part 2 : methods of test. Test Fg : vibration, acoustically induced.
NF C20-775:1998 Environmental testing. Part 2 : tests. Test Eh : hammer tests.
NF C20-701:1993 Environmental testing - Part 2 : tests - Tests A : cold.
NF C20-701/A1:1993 Environmental testing - Part 2 : tests - Tests A : cold.
NF C20-700-2-75*NF EN 60068-2-75:2015 Environmental testing - Part 2-75 : tests - Test Eh : hammer tests
NF C20-702*NF EN 60068-2-2:2007 Environmental testing - Part 2-2 : tests - Tests B : dry heat
NF C93-537-4-11*NF EN 50289-4-11:2002 Communication cables - Specifications for test methods - Part 4-11 : environmental test methods - A horizontal integrated fire test method
NF C20-744:1995 Environmental testing. Part 2 : tests. Guidance on test T : soldering.
NF C20-730*NF EN 60068-2-30:2006 Environmental testing - Part 2-30 : tests - Test Db : damp heat, cyclic (12 h + 12 h cycle)
NF C20-408:1991 Environmental Testing Test Methods Part 5:Guide to Drafting of Test Methods General Principles
NF C20-700-2-82*NF EN 60068-2-82:2013 Environmental testing - Part 2-82 : tests - Test XW1 : whisker test methods for electronic and electric components
NF EN 60068-2-66:1995 Environmental tests - Part 2: test methods - Cx test: continuous damp heat test (unsaturated pressurized steam)
NF C20-774*NF EN 60068-2-74:2000 Environmental testing - Part 2 : tests - Test Xc : fluid contamination.
NF C20-706:1995 Environmental testing. Part 2 : tests. Tests fc : vibration (sinusoidal).
NF C20-701*NF EN 60068-2-1:2007 Environmental testing - Part 2-1 : tests - Tests A : cold.

British Standards Institution (BSI)

BS EN 60068-2-31:2008 Environmental testing –– Part 2-31: Tests – Test Ec: Rough handling shocks, primarily for equipment-type specimens
BS EN 60068-2-27:1993 Environmental testing - Test methods - Environmental testing procedures - Tests - Test Ea and guidance - Shock
BS EN 60068-2-81:2003 Environmental testing - Test methods - Test Ei - Shock - Shock response spectrum synthesis
BS EN 60068-2-2:1993 Environmental testing - Test methods - Tests B. Dry heat
BS EN 60068-2-27:2009 Environmental testing - Part 2-27:Tests - Test Ea and guidance - Shock
BS EN 60068-2-75:1997 Environmental testing - Test methods - Test Eh - Hammer tests
BS EN 60068-2-1:1993 Environmental testing - Test methods - Tests A. Cold
BS EN 60068-2-44:1995 Environmental testing - Test methods - Tests - Guidance on Test T. Soldering
BS EN 60068-2-65:1995 Environmental testing - Test methods - Test Fg - Vibration, acoustically induced
BS EN 60068-2-60:1996 Environmental testing - Test methods - Test Ke - Flowing mixed gas corrosion test
BS EN 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
24/30453830 DC BS EN IEC 63211-2-21 Durability test methods for electronic displays - Part 2-21: Environmental tests - Test methods for heat and humidity
BS EN 60068-2-31:1993 Environmental testing - Test methods - Test Ec - Drop and topple, primarily for equipment-type specimens
BS EN 60068-2-6:1996 Environmental testing - Test methods - Test Fc - Vibration (sinusoidal)

European Committee for Electrotechnical Standardization（CENELEC）

EN 60068-2-31:2008 Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens
EN 60068-2-81:2003 Environmental testing Part 2-81: Tests Test Ei: Shock Shock response spectrum synthesis
EN 60068-2-39:2016 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
EN 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
EN 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
EN 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
EN 60068-2-13:1999 Environmental Testing - Part 2: Tests - Test M: Low Air Pressure
EN 60068-2-47:2005 Environmental testing Part 2-47: Tests - Mounting of specimens for vibration, impact and similar dynamic tests
EN 60068-2-82:2007 Environmental testing - Part 2-82: Tests - Test Tx: Whisker test methods for electronic and electric components
HD 323.2.31 S1-1988 Basic Environmental Testing Procedures - Part 2: Tests. Test Ec: Drop and Topple, Primarily for Equipment- Type Specimens
EN 60068-2-61:1993 Environmental Testing Part 2: Test Methods Test Z/ABDM: Climatic Sequence
EN 60068-2-6:2008 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
EN 60068-2-78:2013 Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state

Danish Standards Foundation

DS/IEC 68-2-63:1993 Environmental testing. Part 2: Test methods. Test Eg: Impact, spring hammer
DS/EN 12046-2:2000 Operating forces - Test method - Part 2: Doors
DS/IEC 68-2-27:1988 Basic environmental testing procedures. Part 2: Tests. Test Ea and guidance: Shock
DS/IEC 68-2-62:1992 Environmental testing. Part 2: Test methods. Test Ef: Impact,pendulum hammer
DS/EN 60068-2-47:2006 Environmental testing - Part 2-47: Tests - Mounting of specimens for vibration, impact and similar dynamic tests
DS/EN 60068-2-31:2008 Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens

TH-TISI

TIS 2380.2-27-2013 Environmental testing.part 2-27: tests.test ea and guidance: shock
TIS 2380.2-2-2012 Environmental testing.part 2-2: tests.test b: dry heat
TIS 2380.2-1-2012 Environmental testing.part 2-1: tests.test a: cold

VN-TCVN

TCVN 7699-2-27-2007 Environmental testing.Part 2-27: Tests.Test Ea and guidance: Shock
TCVN 7699-2-2-2011 Environmental testing.Part 2-2: Tests.Test B: Dry heat
TCVN 7699-2-75-2011 Environmental testing.Part 2-75: Tests.Test Eh: Hammer tests
TCVN 7699-2-1-2007 Environmental testing.Part 2-1: Tests.Test A: Cold
TCVN 7699-2-13-2007 Environmental testing.Part 2-13: Tests.Test M: Low air pressure
TCVN 7699-2-47-2007 Environmental testing.Part 2-47: Tests.Mounting of specimens for vibration, impact and similar dymamic tersts
TCVN 7699-2-11-2007 Environmental testing.Part 2-11: Tests.Test Ka: Salt mist
TCVN 7699-2-32-2007 Environmental testing.Part 2-32: Tests.Test Ed: Free fall
TCVN 7699-2-6-2009 Environmental testing.Part 2-6: Tests.Test Fc: Vibration (sinusoidal)
TCVN 7699-2-18-2007 Environmental testing.Part 2-18: Tests.Test R and guidance: Water
TCVN 7699-2-44-2007 Environmental testing.Part 2-44: Tests.Guidance on Test T: Soldering
TCVN 7699-2-30-2007 Environmental testing.Part 2-30: Tests.Test A: Damp heat, cyclic (12h+12h cycle)

KR-KS

KS C IEC 60068-2-27-2017 Environmental testing－Part 2：Tests－Test Ea and guidance：Shock
KS C IEC 60068-2-70-2020 Environmental Testing — Part 2-70: Tests Xb: abrasion of markings and letterings caused by rubbing of fingers and hands
KS C IEC 60068-2-75-2017 Environmental testing－Part 2：Tests－Test Eh：Hammer tests
KS C IEC 60068-2-82-2021 Environmental testing — Part 2-82: Tests — Test Xw1: Whisker test methods for components and parts used in electronic assemblies
KS C IEC 60068-2-13-2022 Environmental testing — Part 2-13: Tests —Test M: Low air pressure
KS C IEC 60068-2-18-2021 Environmental testing － Part 2-18: Tests － Test R and guidance: Water

IN-BIS

IS 9001 Pt.17-1985 Environmental Testing Guidelines Part 17 Impact Testing
IS 2106 Pt.8-1964 Environmental testing of electronic equipment Part 8: Shock or impact testing

European Committee for Standardization (CEN)

HD 323.2.27 S2-1988 Basic environmental testing procedures; part 2: tests; test Ea and guidance: shock
HD 323.2.20 S3-1992 Basic environmental testing procedures; part 2: tests; test 1: soldering
EN 12046-2:2000 Operating forces - Test method - Part 2: Doors
prEN 60068-2-1-1992 Basic safety publication; environmental testing; part 2: tests methods; test A: cold
prEN 60068-2-31-1992 Basic environmental testing procedures; part 2: tests; test Ec: drop and topple, primarily for equipment-type specimens (IEC 68-2-31:1969 + AMD 1:1982)
prEN 60068-2-27-1992 Basic environmental testing procedures; part 2: tests; test Ea and guidance: shock (IEC 68-2-27:1987)
EN 60068-2-45:1992 Environmental testing; part 2: test methods; test XA and guidance: immersion in cleaning solvents (IEC 68-2-45:1980 + corrigendum:1981)
prEN 60068-2-2-1992 Basic safety publication; environmental testing; part 2: tests methods; test B: dry heat

International Organization for Standardization (ISO)

ISO 10263-3:2009 Earth-moving machinery - Operator enclosure environment - Part 3: Pressurization test method
ISO 10263-2:2009 Earth-moving machinery - Operator enclosure environment - Part 2: Air filter element test method

RO-ASRO

STAS SR EN 60068-2-65-1996 Environmental testing -Part 2: Method of test -Test Fg: Vibration, acoustically induced
SR CEI 68-2-28-1995 Environmental testing Part 2: Tests - Guidance for damp heat tests
STAS SR EN 60068-2-1+A1+A2-1996 Environmental testing Part 2: Tests-Test A: Cold

Standard Association of Australia （SAA）

AS 60068.2.31:2023 Environmental testing, Part 2.31: Tests — Test Ec: Rough handling shocks, primarily for equipment-type specimens (IEC 60068-2-31:2008 (ED. 2.0) MOD)

Lithuanian Standards Office

LST EN 12046-2-2002 Operating forces - Test method - Part 2: Doors

NL-NEN

NEN 10068-2-59-1994 Environmental testing. Part 2: Test methods. Test Fe: Vibration. Sine beat method (IEC 68-2-59:1990)

BE-NBN

NBN-EN 60068-2-45-1993 Basic safety publication. Environmental testing. Part 2: Test methods. Test XA and guidance: Immersion in cleaning solvents

DIN

DIN EN 60068-2-27:1995 Basic environmental testing procedures - Part 2: Tests; test Ea and guidance: Shock (IEC 60068-2-27:1987); German version EN 60068-2-27:1993

GSO

BH GSO ISO 10263-3:2016 Earth-moving machinery -- Operator enclosure environment -- Part 3: Pressurization test method
OS GSO ISO 10263-3:2013 Earth-moving machinery -- Operator enclosure environment -- Part 3: Pressurization test method

RU-GOST R

GOST R IEC 60068-2-82-2017 Environmental testing. Part 2-82. Tests. Test XW1: Whisker test methods for electronic and electric components

Others: