GB/T 26949.10-2011 in English

《GB/T 26949.10-2011工业车辆 稳定性验证 第10部分：在由动力装置侧移载荷条件下堆垛作业的附加稳定性试验》由TC332（全国工业车辆标准化技术委员会）归口，主管部门为中国机械工业联合会。

Scope

This part of GB/T 26949 specifies the stability and verification methods related to the safety of industrial vehicles defined in GB/T 6104. Industrial vehicles referred to in this part are self-propelled or pedestrian-propelled vehicles with wheels, except for vehicles running on rails. These vehicles can be driver-controlled or unmanned and are used for jacking, lifting, stacking or layering. This part of GB/T 26949 specifies additional tests for verifying the stability of vehicles equipped with dynamic load handling devices (such as side shifters), which can move the center of mass of the load from the longitudinal center plane of the vehicle by an obvious predetermined The amount of displacement, and the load is accessed when the mast is vertical or the telescopic boom is raised to the maximum angle and maximum extension. A displacement is considered significant if it is greater than the following values: - vehicles with a rated lifting capacity t of less than 5 000 kg: 100 mm; Vehicles with a lifting capacity greater than 10,000 kg and less than 20,000 kg: 250 mm; — Vehicles with a rated lifting capacity of not less than 20,000 kg: 350 mm.