GB/T 546-2016 in English
VALIDHall anchor
- Issued on:2016-12-13
- Implemented on:2017-07-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$214.00
| Standard No: | GB/T 546-2016 |
| Document status: | VALID |
| Title in English: | Hall anchor |
| Title in Chinese: | 霍尔锚 |
| Language: | English |
| File Format: | Electronic (PDF) |
| Delivery: | Via email within 1~3 business days |
| Issued on: | 2016-12-13 |
| Implemented on: | 2017-07-01 |
| Superseding: |
GB/T 546-1997 Hall anchor
|
| ICS Classification: | 47.020.50-Deck equipment and installations |
| Chinese Classification: | U21-Mooring fittings |
| Professional Classification: | GB-National Standard |
| Related Keywords: | hall anchor case background
gb/t546-2016 hall anchor standard standard dimensions technical requirements test methods scope anchor claw anchor rod type a hall anchor |
| Related Topics: | you
Hall Hall volume Flowmeter Hall Flowmeter Hall Quantity Hall device you paller GBT546-1997 GB/T 546-2016 Hall Anchor Industry hall anchor hall anchor execution |
《GB/T 546-2016霍尔锚》由TC129（全国船舶舾装标准化技术委员会）归口，主管部门为国家标准化管理委员会。
Introduction
In-depth interpretation of GB/T546-2016 Hall Anchor Standard
| Standard dimensions | Technical requirements | Test methods | Scope of application |
|---|---|---|---|
| Material properties | Anchor claw: marine cast steel ZG200-400; anchor rod: high-quality carbon structural steel (No. 20). | Tensile test, form and position tolerance detection. | Applicable to all types of ships and water buildings. |
| Dimension tolerance | The dimension tolerance of each part of the anchor is 4%, with a maximum of no more than 20mm; the angle tolerance of the anchor claw is 1°. | General measuring tool inspection. | Ensure structural stability and reliability. |
| Strength requirements | Drop test: No cracks or deformation after free fall from a height of 4m; Tensile test: Residual deformation does not exceed 1% of the gauge length. | Drop test, tensile test (GB/T548-1996). | Verify product performance under extreme conditions. |
Actual application case of Hall anchor
Case background:During the construction of an ocean-going cargo ship, a type A Hall anchor in accordance with the GB/T546-2016 standard was selected as the main anchor. The designer needs to ensure that it meets the ship's stability requirements and complies with classification society certification.
Implementation suggestions
- Material selection:Select materials strictly in accordance with the provisions in Table 2, and conduct heat treatment and non-destructive testing.
- Dimension control:Use precision machining equipment to ensure that the dimensional tolerance of each part meets the requirements of Clause 4.3.
- Test verification:Complete strength tests such as tension and drop to ensure that product performance meets the standards.
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-
GB/T 45607-2025 in English
Ships and marine technology—Ship’s mooring and towing fittings—Seats for mooring chocks
2025-04-25 -
GB/T 35353-2017 in English
Large yachts—Deck equipment—Anchoring equipments
2017-12-29 -
GB/T 47733-2026 in English
Ships and marine technology—Ship's mooring and towing fitting—Seats for closed chocks
2026-05-25 -
GB/T 11586-2018 in English
Ships and marine technology—Ship’s mooring and towing fittings—Panama chocks
2018-06-07 -
GB/T 41216-2021 in English
Marine combine connecting line for mooring
2021-12-31 -
GB/T 21484-2008 in English
Shipbuilding - Cable stoppers
2008-03-03
