SY/T 5252-2016 in English
VALIDSpecification for measurement of rocf natural gamma spectrometry in laboratory
- Issued on:2016-01-07
- Implemented on:2016-06-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$388.00
Scope
This standard specifies the conventional measurement method for measuring the natural gamma energy spectrum of rock samples (hereinafter referred to as "rock samples") in the laboratory. This standard applies to sodium iodide [hereinafter represented by "NaI(TI)"] detectors, bismuth germanate (hereinafter represented by "BGO") detectors or high-purity germanium (hereinafter represented by "HPGe") detectors used in laboratories The detector measures the natural gamma spectrum of the rock sample. The minimum count rate of the rock sample to be measured is higher than the lower detection limit of the energy spectrometer, and the maximum count rate is less than 1 × 10 cps.

Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-

SY/T 5429-1991 in English
Small diameter flow moisture tester
1992-01-15 -

SY/T 0058-1998 in English
Technical specifications for cone penetration
1998-04-16 -

SY/T 4054-1992 in English
Radiation cross-linked polyethylene heat shrinkable tape
1993-02-22 -

SY 6433-1999 in English
Requirement on petroleum operations in the design if safety emergency plan for shallow sea
1999-09-14 -

SY/T 0009-2012 in English
Compile specification for design documents of petroleum surface facilities
2012-08-23 -

SY 5282-1991 in English
Oil pumping rod card
1991-07-19 -

SY/T 5875-1993 in English
Oil well liquid level test method
1994-01-06