Choice of Limulus Reagent

Choice of Limulus Reagent, Total:242 items.

The international standard classification for "Choice of Limulus Reagent" includes: Physics. Chemistry , Natural gas , Radiation measurements , Head protective equipment , Mathematics , Other products of the chemical industry .

The Chinese standard classification for "Choice of Limulus Reagent" includes: Basic standards and general methods , Natural gas , Ionizating Radiation Measurement , Environmental radiation protection and nuclear medicine protection , Safety appliance and equipment , Mathematics , Blankets , Pipe fittings, clamps and seals , Catalyst .

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 41309-2022 Nanotechnologies—Endotoxin test on nanomaterial samples for in vitrosystems—Limulus amebocyte lysate (LAL) test

国家能源局

SY/T 6538-2016 Formulated selective desulfurization solvent

Professional Standard - Petroleum

SY/T 5925-2012 Method for Selecting Chemical Tracers Used in Water Injection
SY 5925-2012 Selection Method of Chemical Tracer for Oilfield Water Injection
SY/T 6538-2002 Formulated selective desulfurization solvent
SY/T 5925-1994 Selection Method of Chemical Tracer for Oilfield Water Injection

未注明发布机构

ASTM RR-D32-1028 1990 D4463-Method for Determining the Selectivity of Fluid Cracking Catalysts by Microactivity Test

National Metrological Verification Regulations of the People's Republic of China

JJG(民航) 0064-2001 CTS-700 SELCAL/ATSCALL Test Set

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 16640-1996 STANDARD guide for selection and calibration of dosimetry systems for radiation processing
GB/T 16640-2008 Standard guide for selection and calibration of dosimetry systems for radiation processing
GB/T 23466-2009 Guideline for selection of hearing protectors

Group Standards of the People's Republic of China

T/CSTM 00525-2022 Selective hydrodesulfurization catalyst for fluid catalytic cracking gasoline
T/CIRA 4-2019 Selection and use of mathematical methods for calculating absorbed dose in radiation processing applications
T/CSTM 00318-2020 Ni-based catalyst of first stage selective hydrogenation for pyrolysis gasoline
T/CIQA 62-2023 Disinfection standard for exhibition activities - disinfectant selection requirements
T/CNPPA 3020-2022 Study guideline of laminated film/bag for single-dose oral solution
T/CNTAC 84-2021 Dyeing wastewater treatment—Flocculant selection and technical requirements
T/CSTM 00527-2022 Pd-based catalyst of first stage selective hydrogenation for pyrolysis gasoline

Professional Standard - Light Industry

QB/T 1086-1991 Handmade Carpet - Sampling and Test Area Selection

轻工业部

QB 1086-1991 Handmade carpet sampling and test area selection

Professional Standard - Aviation

HB 4-112-1976 Selection of steel balls for valves
HB 4-112-1983 Selection of Steel Ball Used for Valve

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34700-2017 Rare earth type selective catalytic reduction (SCR) denitration catalysts

KR-KS

KS I ISO 17381-2022 Water quality — Selection and application of ready-to-use test kit methods in water analysis
KS I ISO 15089-2021 Water quality — Guidelines for selective immunoassays for the determination of plant treatment and pesticide agents

Korean Agency for Technology and Standards (KATS)

KS I ISO 17381:2022 Water quality — Selection and application of ready-to-use test kit methods in water analysis
KS I ISO 17381-2010(2015) Water quality－Selection and application of ready-to-use test kit methods in water analysis
KS I ISO 15462-2008(2018) Water quality－Selection of tests for biodegradability
KS M ISO 9142-2012(2017) Adhesives－Guide to the selection of standard laboratory ageing conditions for testing bonded joints
KS M ISO 9142-2012(2022) Adhesives－Guide to the selection of standard laboratory ageing conditions for testing bonded joints
KS M ISO 9142:2012 Adhesives－Guide to the selection of standard laboratory ageing conditions for testing bonded joints
KS B 0431-2012 Recommendation of grinding wheels
KS M ISO 9142-2022 Adhesives－Guide to the selection of standard laboratory ageing conditions for testing bonded joints
KS K ISO 5086-2023 Hand-knotted carpets — Sampling and selection of areas of test
KS L 6005-1995(2000) STANDARD RECOMMENDED PRACTICE FOR SELECTION OF COATED ABRASIVES
KS I ISO 15462-2018 Water quality－Selection of tests for biodegradability
KS I ISO 15089:2021 Water quality — Guidelines for selective immunoassays for the determination of plant treatment and pesticide agents
KS D 0295-2009(2019) Visual inspection and hardness test for selective corrosion of alloys
KS E 1003-2019 Mine reclamation — Mine area — Selection of stabilization agent and mixing ratio for contaminated soil — Shake-flask batch test method
KS E 1003-2014 Mine reclamation — Mine area — Selection of stabilization agent and mixing ratio for contaminated soil — Shake-flask batch test method

SCC

AWWA WQTC69242 Selecting Optimal Coagulant
AWWA ACE60071 Selecting the Right Approach to Validation Testing: Three Options and Lessons Learned
AWWA QTC98341 Decision Tree to Select the Appropriate Drinking Water Disinfectant
CAN/CGSB 2.34-1995 Guide to the choice and use of soaps and detergents
CAN/CGSB-2.34-M90-1990 Guide to the Selection and Use of Soaps and Detergents
CAN/CGSB-2.34-1995 Guide to the Selection and Use of Soaps and Detergents
AWWA WSC69987 Selecting Disinfectants in a Security-Conscious Environment
PLUS 1173:2012 Guide to the selection and use of sterilization indicators
AWWA ACE99398 Choosing DAF in the Process Selection for a Plant Expansion
BS 1282:1975 Guide to the choice, use and application of wood preservatives
07/30151497 DC ISO 26842. Adhesives. Guidelines for the selection of adhesives for indoor wood products by durability testing
AWWA JAW21957 Journal AWWA — Selecting Coagulant, Filtration, and Sludge-Conditioning Aids
AWPA E1-23 Laboratory Methods for Evaluating the Termite Resistance of Wood-Based Materials: Choice and No-Choice Tests
NS-ISO 9142:1990 Adhesives — Guide to the selection of standard laboratory ageing conditions for testing bonded joints
DANSK DS/CEN ISO/TR 15462:2010 Water quality - Selection of tests for biodegradability
AWPA E1-16 Laboratory Methods for Evaluating the Termite Resistance of Wood-based Materials: Choice and No-choice Tests
AWPA E1-17 Laboratory Methods for Evaluating the Termite Resistance of Wood-based Materials: Choice and No-choice Tests
NS 1693:1969 Selection and preparation of samples and test pieces for wrought steel
AWWA JAW6554 Journal AWWA — Considering Sludge Production in the Selection of Coagulants
MIL MIL-HDBK-267B-2020 Guide for Selection of Lubricants and Hydraulic Fluids for Use in Shipboard Equipment
AWWA WQTC69413 Oxidant Selection for the Treatment of Manganese (II), Iron (II), and Arsenic (III) in Groundwaters
DANSK DS/EN ISO 9142:2004 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints
AWWA ACE56200 Principles of Technology Selection
BS ISO 26842-2:2009 Adhesives. Test methods for the evaluation and selection of adhesives for indoor wood products-Resistance to delamination in severe environments
BS EN 29142:1993 Adhesives. Guide to the selection of standard laboratory ageing conditions for testing bonded joints
AWWA WQTC50502 A New Hybrid Arsenic — Selective Sorbent: Development and Performance Evaluation
AWWA ACE56171 Process Selection, Design and Equipment Selection Under Design-Build-Operate Constraints
AWWA ACE54463 Institutional Alternatives for the 21st Century
NS-EN ISO 9142:2003 Adhesives — Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003)
BS ISO 26842-1:2009 Adhesives. Test methods for the evaluation and selection of adhesives for indoor wood products-Resistance to delamination in non-severe environments
AWWA MTC93006 Membrane Process Selection and the Use of Bench and Pilot Tests
DANSK DS/IEC TR 62936:2016 Test method development – Guidelines for substance selection

British Standards Institution (BSI)

BS 6213:2000+A1:2010 Selection of construction sealants - Guide
BS 6213:2000 Selection of construction sealants - Guide
BS 7152:1991 Guide to choice of chemical disinfectants
BS 1282:1999 Wood preservatives - Guidance on choice, use and application
BS ISO 17381:2003 Water quality. Selection and application of ready-to-use test kit methods in water analysis
BS EN ISO 9142:2004 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints
BS EN ISO 9142:2003 Adhesives. Guide to the selection of standard laboratory ageing conditions for testing bonded joints
PD CEN ISO/TR 15462:2009 Water quality. Selection of tests for biodegradability
BS ISO 15556:1999 Guide for selection and calibration of dosimetry systems for radiation processing
BS PD CEN ISO/TR 15462:2009 Water quality — Selection of tests for biodegradability
BS EN ISO 9142:2003(2007) Adhesives — Guide to the selection of standard laboratory ageing conditions for testing bonded joints
BS ISO 26842-2:2020 Adhesives. Test methods for the evaluation and selection of adhesives for indoor wood products - Resistance to delamination in severe environments
BS ISO 26842-2:2013 Adhesives. Test methods for the evaluation and selection of adhesives for indoor wood products. Resistance to delamination in severe environments
BS ISO 26842-1:2020 Adhesives. Test methods for the evaluation and selection of adhesives for indoor wood products - Resistance to delamination in non-severe environments
BS ISO 26842-1:2013 Adhesives. Test methods for the evaluation and selection of adhesives for indoor wood products. Resistance to delamination in non-severe environments
BS ISO 12404:2012 Soil quality. Guidance on the selection and application of screening methods

American Society for Testing and Materials (ASTM)

ASTM F1001-99a Standard Guide for Selection of Chemicals to Evaluate Protective Clothing Materials
ASTM C755-02 Standard Practice for Selection of Vapor Retarders for Thermal Insulation
ASTM C755-97 Standard Practice for Selection of Vapor Retarders for Thermal Insulation
ASTM C755-85(1990) Standard Practice for Selection of Vapor Retarders for Thermal Insulation
ASTM C755-10(2015)e1 Standard Practice for Selection of Water Vapor Retarders for Thermal Insulation
ASTM C755-19a Standard Practice for Selection of Water Vapor Retarders for Thermal Insulation
ASTM C755-20 Standard Practice for Selection of Water Vapor Retarders for Thermal Insulation
ASTM C755-19 Standard Practice for Selection of Water Vapor Retarders for Thermal Insulation
ASTM C755-19b Standard Practice for Selection of Water Vapor Retarders for Thermal Insulation
ASTM D2205-85(2004) Standard Guide for Selection of Tests for Traffic Paints
ASTM D6361/D6361M-98(2020) Standard Guide for Selecting Cleaning Agents and Processes
ASTM D6361/D6361M-98(2015) Standard Guide for Selecting Cleaning Agents and Processes
ASTM D6361/D6361M-98(2010)e1 Standard Guide for Selecting Cleaning Agents and Processes
ASTM G127-15(2023) Standard Guide for the Selection of Cleaning Agents for Oxygen-Enriched Systems
ASTM D6361-98(2004)e1 Standard Guide for Selecting Cleaning Agents and Processes
ASTM G127-95 Standard Guide for the Selection of Cleaning Agents for Oxygen Systems
ASTM F1001-99a(2006) Standard Guide for Selection of Chemicals to Evaluate Protective Clothing Materials
ASTM D6361-98 Standard Guide for Selecting Cleaning Agents and Processes
ASTM G127-95(2008) Standard Guide for the Selection of Cleaning Agents for Oxygen Systems
ASTM G127-95(2000) Standard Guide for the Selection of Cleaning Agents for Oxygen Systems
ASTM E2167-01(2008) Standard Guide for Selection and Use of Stone Consolidants
ASTM E2167-01 Standard Guide for Selection and Use of Stone Consolidants
ASTM E432-91(1997) Standard Guide for Selection of a Leak Testing Method
ASTM G127-15 Standard Guide for the Selection of Cleaning Agents for Oxygen-Enriched Systems
ASTM D6465-99(2016) Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants
ASTM D6465-99(2012) Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants
ASTM D6465-99(2005) Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants
ASTM D6465-99 Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants
ASTM E432-91(2011) Standard Guide for Selection of a Leak Testing Method
ASTM C755-10e1 Standard Practice for Selection of Water Vapor Retarders for Thermal Insulation
ASTM ISO/ASTM51261-02 Standard Guide for Selection and Calibration of Dosimetry Systems for Radiation Processing
ASTM G190-06 Standard Guide for Developing and Selecting Wear Tests
ASTM C755-10 Standard Practice for Selection of Water Vapor Retarders for Thermal Insulation
ASTM C755-03 Standard Practice for Selection of Water Vapor Retarders for Thermal Insulation
ASTM G190-15 Standard Guide for Developing and Selecting Wear Tests
ASTM D2205-85(2010) Standard Guide for Selection of Tests for Traffic Paints
ASTM E1894-08 Standard Guide for Selecting Dosimetry Systems for Application in Pulsed X-Ray Sources
ASTM E1894-97(2002) Standard Guide for Selecting Dosimetry Systems for Application in Pulsed X-Ray Sources
ASTM ISO/ASTM 51261-02 Standard Guide for Selection and Calibration of Dosimetry Systems for Radiation Processing
ASTM E1894-18 Standard Guide for Selecting Dosimetry Systems for Application in Pulsed X-Ray Sources
ASTM E1894-13 Standard Guide for Selecting Dosimetry Systems for Application in Pulsed X-Ray Sources
ASTM D5154-91 Standard Test Method for Determining the Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM E1894-97 Standard Guide for Selecting Dosimetry Systems for Application in Pulsed X-Ray Sources
ASTM E1894-13a Standard Guide for Selecting Dosimetry Systems for Application in Pulsed X-Ray Sources
ASTM D2205-85(1998) Standard Guide for Selection of Tests for Traffic Paints

US-CFR-file

CFR 9-121.4-2014 Animals and animal products. Part121:Possession,use,and transfer of select agents and toxins. Section121.4:Overlap select agents and toxins.
CFR 9-121.3-2014 Animals and animal products. Part121:Possession,use,and transfer of select agents and toxins. Section121.3:VS select agents and toxins.
CFR 9-121.5-2014 Animals and animal products. Part121:Possession,use,and transfer of select agents and toxins. Section121.5:Exemptions for VS select agents and toxins.
CFR 7-331.3-2014 Agriculture. Part331:Possession, use, and transfer of select agents and toxins. Section333.3:PPQ select agents and toxins.
CFR 9-121.6-2014 Animals and animal products. Part121:Possession,use,and transfer of select agents and toxins. Section121.6:Exemptions for overlap select agents and toxins.
CFR 7-331.11-2014 Agriculture. Part331:Possession, use, and transfer of select agents and toxins. Section333.11:Security.
CFR 7-331.1-2014 Agriculture. Part331:Possession, use, and transfer of select agents and toxins. Section333.1:Definitions.

GM North America

GM GM154M-2002 Selection, Specification and Use of Brazing Fluxes
GM GM6087M-1989 Selection and Use of Brazing Filler Metal

PL-PKN

PN BN 6110-10-1964 Paint thinner. Sample selection

German Institute for Standardization

DIN 51509-1:1976 Selection of lubricants for gears; gear lubricating oils
DIN EN ISO 9142:2004 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003); German version EN ISO 9142:2003
DIN 7157 Bb.1:1973 Selection of fits; selection of tolerance zones according to ISO/R 1829
DIN EN ISO 9142:2004-05 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003); German version EN ISO 9142:2003
DIN 51509-2:1988 Lubricants; selection for lubricants for gears; semi-fluid lubricants
DIN 8659-2:1980 Machine tools; lubrication of machine tools, selection of lubricants for machine tools operating by removing metal

PH-BPS

PNS ISO 29701:2021 Nanotechnologies - Endotoxin test on nanomaterial samples for in vitro systems - Limulus amebocyte lysate (LAL) test

GB-REG

REG 7 CFR PART 331-2012 POSSESSION, USE, AND TRANSFER OF SELECT AGENTS AND TOXINS

API - American Petroleum Institute

API PUBL 4068-1970 OIL SPILL TREATING AGENTS SELECTION BASED ON ENVIRONMENTAL FACTORS

Canadian General Standards Board （CGSB)

CGSB 2.34-95-CAN/CGSB-1995 Guide Pour Le Choix Et L'Utilisation Des Savons Et Detergents
CGSB 4.2 NO. 27-98-CAN/CGSB-1998 Methodes Pour Epreuves Textiles Comportement Au Feu - Selection Des Methodes

Malaysia Standards

MS 697-1981 A guide to the selection, use and application of wood preservatives

RO-ASRO

STAS 9619-1974 SIVES AND SCREENS FOR MATERIAL TESTING jAND SELECTING Terminology
STAS 1078-1973 Sives and screens for material testing and selecting PERFORATED PLATES
STAS 8440-1969 Mineral oil refined with selective solvents. Determination of furfural content
SR ISO 5086:1996 Hand - knotted carpets - Sampling and selection of areas of test

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE NO-94-15-1994 Refrigeration System and Refrigerant Choices for District Cooling
ASHRAE SF-98-23-4-1998 Selection of Hydronic Balancing Valves

AENOR

UNE-ISO 17381:2012 Water quality -- Selection and application of ready-to-use test kit methods in water analysis

Association Francaise de Normalisation

NF T76-109:1993 Adhesives. Guide to the selection of standard laboratory ageing conditions for testing bonded joints.
FD T90-315*FD ISO/TR 15462:2006 Water quality - Selection of tests for biodegradability
NF T76-109*NF EN ISO 9142:2004 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints.
FD ISO/TR 15462:2006 Water quality - Selection of biodegradability tests
XP X 30-417-1997 WASTE. GUIDELINES FOR THE SELECTION OF A LEACHING TEST.
NF EN ISO 9142:2004 Adhesives - Guide for the selection of normal laboratory aging test conditions for bonded assemblies
NF X31-123:2012 Soil quality - Guidance on the selection and application of screening methods.

IETF - Internet Engineering Task Force

RFC 3011-2000 The IPv4 Subnet Selection Option for DHCP
RFC 2883-2000 An Extension to the Selective Acknowledgement (SACK) Option for TCP
RFC 6607-2012 Virtual Subnet Selection Options for DHCPv4 and DHCPv6
RFC 2018-1996 TCP Selective Acknowledgment Options (Obsoletes RFC 1072)

RU-GOST R

GOST R 56989-2016 Water quality. Selection of tests for biodegradability

International Organization for Standardization (ISO)

ISO/TR 15462:1997 Water quality — Selection of tests for biodegradability
ISO 9142:1990 Adhesives; guide to the selection of standard laboratory ageing conditions for testing bonded joints
ISO 9142:2003 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints
ISO 15556:1998 Guide for selection and calibration of dosimetry systems for radiation processing
ISO 377:1985 Wrought steel — Selection and preparation of samples and test pieces
ISO/TR 29901:2007 Selected illustrations of full factorial experiments with four factors
ISO/ASTM 51261:2002 Guide for selection and calibration of dosimetry systems for radiation processing
ISO 3751:1976 Zinc ingots; Selection and preparation of samples for chemical analysis

GSO

GSO ISO 4739:2013 Wrought copper and copper alloy products -- Selection and preparation of specimens and test pieces for mechanical testing
BH GSO ISO/TR 15462:2016 Water quality – Selection of tests for biodegradability
GSO ISO/TR 15462:2013 Water quality – Selection of tests for biodegradability
OS GSO ISO 9142:2013 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints
BH GSO ISO 9142:2016 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints
BH GSO ISO 15089:2016 Water quality -- Guidelines for selective immunoassays for the determination of plant treatment and pesticide agents

ESDU - Engineering Sciences Data Unit

ESDU 94017-1994 SELECTION OF MATERIALS@ MANUFACTURING METHODS AND LUBRICANTS FOR CAM MECHANISMS
ESDU 94020-1994 Selection of synthetic oils.
ESDU 94017 A-2002 Selection of materials@ manufacturing methods and lubricants for cam mechanisms.
ESDU 13004-2013 Selection of cooling systems
ESDU 82006 A-1985 SELECTION OF DRD CAM LAWS
ESDU 03016-2003 Selection of lubricant class (liquids@ solids@ semi-solids and gases)
ESDU 82006 B-2008 Selection of DRD cam laws.

National Association of Corrosion Engineers (NACE)

NACE MR0174-2001 Recommendations for Selecting Inhibitors for Use as Sucker-Rod Thread Lubricants Item No. 21300

Danish Standards Foundation

DS/ISO 17381:2007 Water quality - Selection and application of ready-to-use test kit methods in water analysis
DS/CEN ISO/TR 15462:2010 Water quality - Selection of tests for biodegradability
DS/EN ISO 9142:2004 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints

Canadian Standards Association (CSA)

CSA PLUS 1173-2012 Guide to the selection and use of sterilization indicators (First Edition)

ES-UNE

UNE-CEN ISO/TR 15462:2010 IN Water quality - Selection of tests for biodegradability (ISO/TR 15462:2006)

United States Navy

NAVY MIL-HDBK-267 A-1987 GUIDE FOR SELECTION OF LUBRICANTS AND HYDRAULIC FLUIDS FOR USE IN SHIPBOARD EQUIPMENT

(U.S.) Ford Automotive Standards

FORD M6CX1-1991 SELECTION OF HYDRAULIC FLUIDS

HU-MSZT

MSZ 05 33.2422-1974 Excavator selection
MNOSZ 19889-1954 Negative selection in sorghum
MNOSZ 19649-1955 Choice of strong current rods
MNOSZ 19888-1954 Choice of potatoes to plant
MNOSZ 6059-1953 Selection of wire rope, elevator
MSZ KGST 878-1978 Reliable alternative product selection for standard indicators

European Committee for Standardization (CEN)

prEN 29142-1992 Adhesives; guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:1990)
EN ISO/TR 15462:2009 Water quality - Selection of tests for biodegradability

CZ-CSN

CSN 22 8806-1963 Choice of materials for moulds
CSN ON 73 6953-1965 Choice of irrigation sets

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector

REPORT M.2115-1-2009 Testing procedures for implementation of dynamic frequency selection
REPORT M.2115-2007 Testing procedures for implementation of dynamic frequency selection

International Telecommunication Union (ITU)

ITU-R REPORT M.2115-2007 Testing procedures for implementation of dynamic frequency selection
ITU-R SM.332-1978 Selectivity of receivers
ITU-R M.821-1 SPANISH-1997 OPTIONAL EXPANSION OF THE DIGITAL SELECTIVE-CALLING SYSTEM FOR USE IN THE MARITIME MOBILE SERVICE

RTCA - RTCA@ Inc.

RTCA DO-62-1954 Calibration Procedures Test Standards Omni-Bearing Selectors and Omni-Bearing Selector Test Sets (***ONLY AVAILABLE IN HARDCOPY***)

Society of Automotive Engineers (SAE)

SAE J2056-2-2000 Selection of Transmission Media
SAE J2056/3-2022 Selection of Transmission Media
SAE J2056/3-2000 Selection of Transmission Media
SAE J2056-3-2000 Selection of Transmission Media
SAE J2375-1997 The Selection of Adhesives for the Attachment of Exterior Aftermarket Accessories
SAE J1405-2005 Optional Impulse Test Procedures for Hydraulic Hose Assemblies
SAE J401-1977 SELECTION AND USE OF STEELS
SAE J3260-2022 Selection and Use of Cleaners and Disinfectants for Vehicle Interior Surfaces and Exterior Touch Points

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE 1184 INT 1-2005 Guide for the Selection and Sizing of Batteries for Uninterruptible Power Systems

SAE - SAE International

SAE J2056-3-1991 Selection of Transmission Media
SAE J2375-2019 Selection of Adhesives for the Attachment of Exterior Aftermarket Accessories

American National Standards Institute （ANSI)

ANSI/FCI 18-1-2021 SIZING AND SELECTION OF TYPE 1 SECONDARY PRESSURE DRAINERS
ANSI/FCI 19-1-2021 SIZING AND SELECTION OF TYPE 2 SECONDARY PRESSURE DRAINERS
AAMI TIR25:1999 "Chemical indicators-Guidance for the selection, use, and interpretation of results, 2ed"

ZA-SANS

SANS 29901:2010 Selected illustrations of full factorial experiments with four factors

Japanese Industrial Standards Committee (JISC)

JIS Z 2330:1992 Standard recommended guide for the selection of helium leak testing
JIS Z 2330:2012 Non-destructive testing -- Selection of leak testing method