high energy collision cell

high energy collision cell, Total:324 items.

The international standard classification for "high energy collision cell" includes: Road vehicles in general , Astronomy. Geodesy. Geography , Environmental testing , Mining equipment , Education , Photographic equipment. Projectors , Vibrations, shock and vibration measurements .

The Chinese standard classification for "high energy collision cell" includes: Hygiene, safety and labor protection , New energy vehicle and other automobiles , Spacecraft in general , Traffic control system , Material composition analysis instrument and environment detection instrument in general , Mining machinery equipment in general , Special instruments for teaching , Mechanics Measurement , Camera and photograph instrument , Explosion-proof electric apparatus .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 31498-2015 The safety requirement of electric vehicle post crash
GB/T 24550-2009 protection of motor vehicle for pedestrians in the event of a collision
GB 20072-2006 The requirements of fuel system safety in the event of rear-end collision for passenger car
GB 24550-2024 Protection of motor vehicle for pedestrians in the event of a collision
GB/T 45740-2025 Space debris collision warning technical requirements
GB/T 31498-2021 Post crash safety requirement for electric vehicle
GB 20072-2024 The requirements of safety in the event of rear-end collision for passenger car
GB 20071-2025 The protection of the occupants in the event of a lateral collision
GB 20071-2006 The protection of the occupants in the event of a lateral collision
GB/T 11606.17-1989 The method of environmental test for analytical instruments--Pump test
GB/T 4857.20-1992 Packaging--Transport packages--Bump test method
GB/T 20913-2007 The protection of the occupants in the event of an off-set frontal collision for passenger car
GB/T 33577-2017 Intelligent transportation systems -- Forward vehicle collision warning systems -- Performance requirements and test procedures
GB/T 37337-2019 Protection of the occupants in the event of a lateral pole collision
GB 11551-2003 The protection of the occupant in the event of a frontal collision for passenger car
GB 11551-2014 The protection of the occupants in the event of a frontal collision for motor vehicle
GB/T 44131-2024 Post-crash safety requirement for fuel cell electric vehicle

Group Standards of the People's Republic of China

T/GHDQ 67-2020 Technical Conditions of Forward Collision Warning System of Intelligent Network connected semi-trailer towing vehicle in Frigid Regions
T/ZZAS 043-2024 Collision Alarm System for Rail-span Public Interchange Culverts and Height-limited Guardrails
T/CNCA 028-2022 Technical specification for crash performance test of stall protection facilities in underground roadways
T/CIET 1011-2025 Autonomous vehicle collision avoidance detection system
T/QGCML 2244-2023 Technical specifications for overhead collision avoidance systems
T/CSAE 244-2021 Requirements and test methods for the anti-collision ability of the bottom ofthe battery electric passenger cars
T/ITS 0003-2014 Intelligent Transport Systems Forward Vehicle Collision Mitigation Systems Operation, Performance and Verification Requirements
T/CCMA 0061-2018 Anti-collision device of tower crane

Professional Standard - Education

JY/T 0044-2019 Collision experimental apparatus
JY 44-1987 Crash tester

Military Standard of the People's Republic of China-General Armament Department

GJB 564.3-1988 Filter absorber performance test method collision

未注明发布机构

FORD ESE-M8G181-A1-2000 GASKET, CORK/RUBBER - HIGH SWELL - INJECTION MOLDED - CHANNELED - TYPE 2

National Metrological Verification Regulations of the People's Republic of China

JJG 1174-2021 Shock and Bump Testing Machines
JJG 497-2000 Verification Regulation of Bump Testing Machines

Guangdong Provincial Standard of the People's Republic of China

DB44/T 1481-2014 Integral crash requirements and test methods for power battery packs used in electric vehicles

Professional Standard - Machinery

JB/T 8313-1996 Guide Rules for Safety Performance Test Method of Impact Friction Sparking
JB/T 8250.9-1999 Bump test method for cameras
JB/T 9391-2001 Specifications for bump testing machines

Taiwan Provincial Standard of the People's Republic of China

CNS 14580-2001 Method of test front collisions for passenger cars
CNS 14579-2001 Method of test for fuel leakage in case of collisions for passenger cars
CNS 14581-2001 Method of test for rear collisions for passenger cars

Professional Standard - Traffic

JT/T 1369-2020 The protection of the occupants in the event of a frontal collision for bus
JT/T 1428-2022 Performance requirements and test procedures for rear collision warning system for commercial vehicles
JT/T 1446-2022 Commercial vehicle forward collision mitigation systems performance requirements and test methods

Professional Standard - Railway

TB/T 3501-2018 Rolling Stock Crash Test Test Methods

National Metrological Technical Specifications of the People's Republic of China

JJF 1220-2009 Calibration Specification for PIND (Particle Impact Noise Detection)

Professional Standard - Automobile

QC/T 938-2013 The test specification of protection for pedestrians in the events of collisions

Professional Standard - Electron

SJ/T 31379-1994 Requirements of readiness and methods of inspection and assessment for bump machine tables

Japanese Industrial Standards Committee (JISC)

JIS D 1060:1982 Frontal and rear vehicle collision test procedure
JIS D 1042:1984 Determination of fuel leakage in the event of a collision for passenger cars
JIS D 0802:2015 Intelligent transport systems -- Forward vehicle collision warning systems -- Performance requirements and test procedures
JIS D 0808:2015 Intelligent transport systems -- Forward vehicle collision mitigation systems -- Operation, performance, and verification requirements

FMVSS - Federal Motor Vehicle Safety Standards

49 CFR 571 80 FR 78418-2015 Rear Impact Guards@ Rear Impact Protection
49 CFR 571 70 FR 2105-2005 Federal Motor Vehicle Safety Standards; Side Impact Protection; Anthropomorphic Test Devices; ES–2re Side Impact Crash Test Dummy (Proposed Rule)
49 CFR 571 72 FR 27535-2007 Occupant Crash Protection (Proposed Rules)
49 CFR 571 69 FR 5108-2004 Occupant Crash Protection (Proposed Rules)
49 CFR 571 214-2014 Standard No. 214; Side impact protection
49 CFR 571 224-2009 Standard No. 224; Rear impact protection
49 CFR 571 224-2005 Standard No. 224; Rear impact protection
49 CFR 571 224-2010 Standard No. 224; Rear impact protection
49 CFR 571 224-2014 Standard No. 224; Rear impact protection
49 CFR 571 71 FR 9274-2006 Federal Motor Vehicle Safety Standards; Rear Impact Guards and Rear Impact Protection (Final Rule)
49 CFR 571 224-2016 Standard No. 224; Rear impact protection
49 CFR 571 208-2009 Standard No. 208; Occupant crash protection
49 CFR 571 224-2011 Standard No. 224; Rear impact protection
49 CFR 571 214-2013 Standard No. 214; Side impact protection
49 CFR 571 214-2016 Standard No. 214; Side impact protection
49 CFR 571 214-2012 Standard No. 214; Side impact protection
49 CFR 571 224-2018 Standard No. 224; Rear impact protection
49 CFR 571 224-2012 Standard No. 224; Rear impact protection
49 CFR 571 214-2015 Standard No. 214; Side impact protection
49 CFR 571 214-2017 Standard No. 214; Side impact protection
49 CFR 571 224-2017 Standard No. 224; Rear impact protection
49 CFR 571 208-2014 Standard No. 208; Occupant crash protection
49 CFR 571 208-2011 Standard No. 208; Occupant crash protection
49 CFR 571 208-2010 Standard No. 208; Occupant crash protection
49 CFR 571 224-2015 Standard No. 224; Rear impact protection
49 CFR 571 208-2017 Standard No. 208; Occupant crash protection
49 CFR 571 208-2012 Standard No. 208; Occupant crash protection
49 CFR 571 214-2011 Standard No. 214; Side impact protection
49 CFR 571 208-2013 Standard No. 208; Occupant crash protection
49 CFR 571 224-2013 Standard No. 224; Rear impact protection
49 CFR 571 214-2010 Standard No. 214; Side impact protection
49 CFR 571 214-2009 Standard No. 214; Side impact protection
49 CFR 571 208-2015 Standard No. 208; Occupant crash protection
49 CFR 571 208-2016 Standard No. 208; Occupant crash protection
49 CFR 571 201-2012 Standard No. 201; Occupant protection in interior impact
49 CFR 571 201-2013 Standard No. 201; Occupant protection in interior impact
49 CFR 571 81 FR 19944-2016 Federal Motor Vehicle Safety Standards; Occupant Crash Protection
49 CFR 571 201-2015 Standard No. 201; Occupant protection in interior impact
49 CFR 571 81 FR 19902-2016 Federal Motor Vehicle Safety Standards; Occupant Crash Protection

Korean Agency for Technology and Standards (KATS)

KS R ISO 3784-2014(2024) Road vehicles — Measurement of impact velocity in collision tests
KS C IEC 61721:2016 Susceptibility of a photovoltaic(PV) module to accidental impact damage(resistance to impact test)
KS C IEC 61721:2005 Susceptibility of a photovoltaic(PV) module to accidental impact damage(resistance to impact test)
KS R ISO 6813:2003 Road vehicles－Collision classification－Terminology
KS R 0074-2003 Frontal and rear vehicle collision test procedure
KS R 1162-2012 Steering wheel rearward displacement test in collision
KS R ISO 6813-2023 Road Vehicle Crash Classification Terminology
KS R ISO 6813-2003(2023) Road vehicles－Collision classification－Terminology
KS R ISO 6813-2003(2018) Road vehicles－Collision classification－Terminology
KS R 1163-2012 Fuel leakage test procedure in collision
KS R 0074-2002 Frontal and rear vehicle collision test procedure
KS R 0074-1987 Frontal and rear vehicle collision test procedure
KS R ISO TR 9790:2015 Road vehicles-Anthropomorphic side impact dummy-Lateral impact response requirements to assess the biofidelity of the dummy
KS R 1158-2012 Characteristics of measuring instruments for the collision test
KS R 1164-2002(2007) Windshield mounting test method in collision
KS R ISO TR 9790-2020 Road vehicles－Anthropomorphic side impact dummy－Lateral impact response requirements to assess the biofidelity of the dummy
KS R ISO TR 9790-2015(2020) Road vehicles－Anthropomorphic side impact dummy－Lateral impact response requirements to assess the biofidelity of the dummy
KS R ISO 9790:2004 Road vehicles-Anthropomorphic side impact dummy-Lateral impact response requirements to assess the biofidelity of the dummy
KS R 1162-2002(2007) Steering wheel rearward displacement test in collision
KS R 1158-2002(2007) Characteristics of measuring instruments for the collision test
KS R 1163-2002(2007) Fuel leakage test procedure in collision
KS R 1164-2012 Windshield mounting test method in collision
KS F 2905-2003 Test methods for effect of impact on sprayed fire resistive material applied to structural members
KS X ISO 15623:2018 Intelligent transport systems — Forward vehicle collision warning systems — Performance requirements and test procedures
KS X ISO 15623-2018(2023) Intelligent transport systems — Forward vehicle collision warning systems — Performance requirements and test procedures
KS R ISO 15828-2019 Road vehicles－Offset frontal impact test procedure
KS R 0073-2003 DETERMINATION OF FUEL LEAKAGE IN THE EVENT OF A COLLISION FOR PASSENGER CARS
KS R ISO 3437-2012 Road vehicles－Determination of fuel leakage in the event of a collision
KS X ISO 15623-2018 Intelligent transport systems — Forward vehicle collision warning systems — Performance requirements and test procedures
KS X ISO 22839:2017 Intelligent transport systems — Forward vehicle collision mitigation systems — Operation, performance, and verification requirements
KS X ISO 15623-2023 Intelligent transport systems — Forward vehicle collision warning systems — Performance requirements and test procedures
KS X ISO 22839-2017 Intelligent transport systems — Forward vehicle collision mitigation systems — Operation, performance, and verification requirements
KS R ISO 15829-2020 Road vehicles — Side impact test procedures for the evaluation of occupant interactions with side airbags by pole impact simulation
KS X ISO 22839-2017(2022) Intelligent transport systems — Forward vehicle collision mitigation systems — Operation, performance, and verification requirements
KS R 0073-1987 DETERMINATION OF FUEL LEAKAGE IN THE EVENT OF A COLLISION FOR PASSENGER CARS
KS R ISO 15828-2009(2024) Road vehicles－Offset frontal impact test procedure
KS R ISO 15828-2009(2019) Road vehicles－Offset frontal impact test procedure
KS R ISO 15828-2024 Road vehicles－Offset frontal impact test procedure
KS R 0073-2002 DETERMINATION OF FUEL LEAKAGE IN THE EVENT OF A COLLISION FOR PASSENGER CARS

Society of Automotive Engineers (SAE)

SAE ARP5403 Aircraft Crash Axes
SAE AIR5401 Aircraft Crash Axes
SAE ARP5403A Aircraft Crash Axes
SAE AIR5401A Aircraft Crash Axes
SAE J224_197101 Collision Deformation Classification
SAE J224_202205 Collision Deformation Classification
SAE J850-2015 Fixed Rigid Barrier Collision Tests
SAE J224_198003 Collision Deformation Classification
SAE J224-2022 Automotive Starter Drive Remanufacturing Procedures
SAE J850-1996 BARRIER COLLISION TESTS
SAE AS5402A Design and Performance Criteria Aircraft Crash Axes
SAE AS5402 Design and Performance Criteria Aircraft Crash Axes
SAE J850A-1969 BARRIER COLLISION TESTS
SAE J224-1980 Collision Deformation Classification
SAE J224_201105 Collision Deformation Classification
SAE ARP4102/10A Collision Avoidance System
SAE J224-2011 Collision Deformation Classification
SAE J224A_197202 Collision Deformation Classification
SAE J850-1988 Fixed Rigid Barrier Collision Tests
SAE J224_201702 Collision Deformation Classification
SAE J224-2017 COLLISION DEFORMATION CLASSIFICATION
SAE J224-1971 COLLISION DAMAGE CLASSIFICATION
SAE J224A-1972 COLLISION DEFORMATION CLASSIFICATION
SAE J857_196306 Roll-Over Tests Without Collision
SAE J857A_196910 Roll-Over Tests Without Collision
SAE R-483-2018 Motorcycle Crash Reconstruction
SAE J857_198006 Roll-Over Tests Without Collision
SAE J857-1991 Roll-Over Tests Without Collision
SAE J2376-1997 New-Vehicle Collision Repair Information
SAE J972-1988 Moving Rigid Barrier Collision Tests@ Recommended Practice
SAE J972-1997 MOVING BARRIER COLLISION TESTS
SAE J2376_201910 New-Vehicle Collision Repair Information
SAE J2376_200503 New-Vehicle Collision Repair Information
SAE J2376_201105 New-Vehicle Collision Repair Information
SAE J2376-2019 New-Vehicle Collision Repair Information
SAE J2376_199712 New-Vehicle Collision Repair Information
SAE J972-1966 MOVING BARRIER COLLISION TESTS
SAE J857-1963 ROLL-OVER TESTS WITHOUT COLLISION
SAE J857-1969 ROLL-OVER TESTS WITHOUT COLLISION
SAE J972-2015 Moving Rigid Barrier Collision Tests
SAE J857-1980 ROLL-OVER TESTS WITHOUT COLLISION
SAE J972-1973 MOVING BARRIER COLLISION TESTS
SAE J857A-1969 ROLL-OVER TESTS WITHOUT COLLISION
SAE J2376-2011 New-Vehicle Collision Repair Information
SAE J211-1970 INSTRUMENTATION FOR BARRIER COLLISION TESTS
SAE J1733_199412 Sign Convention for Vehicle Crash Testing
SAE J1733_201811 Sign Convention for Vehicle Crash Testing
SAE J1733_200711 Sign Convention for Vehicle Crash Testing
SAE J1733_202411 Sign Convention for Vehicle Crash Testing
SAE J1733-2018 Sign Convention for Vehicle Crash Testing
SAE J1766-1996 RECOMMENDED PRACTICE FOR ELECTRIC AND HYBRID ELECTRIC VEHICLE BATTERY SYSTEMS CRASH INTEGRITY TESTING
SAE J1766-2005 Recommended Practice for Electric and Hybrid Electric Vehicle Battery Systems Crash Integrity Testing
SAE J1733-1994 Sign Convention for Vehicle Crash Testing
SAE J850_198811 Fixed Rigid Barrier Collision Tests
SAE J972-2000 Moving Rigid Barrier Collision Tests
SAE J850_200009 Fixed Rigid Barrier Collision Tests
SAE J1567-1994 COLLISION DETECTION SERIAL DATA COMMUNICATIONS MUL
SAE J850-2000 Fixed Rigid Barrier Collision Tests
SAE J850_200911 Fixed Rigid Barrier Collision Tests
SAE J/ISO 10997:1997 Full-Scale Side Impact Test Procedure (This document is no longer maintained by SAE)
SAE J972-2009 Moving Rigid Barrier Collision Tests
SAE J972_201503 Moving Rigid Barrier Collision Tests
SAE J972_197303 Moving Rigid Barrier Collision Tests
SAE J972_198812 Moving Rigid Barrier Collision Tests
SAE J972_200910 Moving Rigid Barrier Collision Tests
SAE J850-2009 Fixed Rigid Barrier Collision Tests
SAE J1733-2024 Sign Convention for Vehicle Crash Testing
SAE J1567-1987 COLLISION DETECTION SERIAL DATA COMMUNICATIONS MUL
SAE ARP5029-1998 Measurement Procedures for Strobe Anticollision Lights
SAE J850_199603 Fixed Rigid Barrier Collision Tests
SAE J972_196611 Moving Rigid Barrier Collision Tests
SAE J1766_201401 Recommended Practice for Electric, Fuel Cell and Hybrid Electric Vehicle Crash Integrity Testing
SAE J972_200005 Moving Rigid Barrier Collision Tests
SAE J850_201504 Fixed Rigid Barrier Collision Tests
SAE J850A_196910 Fixed Rigid Barrier Collision Tests
SAE J175_200309 Wheels-Impact Test Procedures-Road Vehicles
SAE J1766-1998 (R) Recommended Practice for Electric and Hybrid Electric Vehicle Battery Systems Crash Integrity Testing
SAE J175_198806 Wheels-Impact Test Procedures-Road Vehicles
SAE J175_197009 Wheels-Impact Test Procedures-Road Vehicles
SAE J2376-2005 New-Vehicle Collision Repair Information
SAE J175_199607 Wheels-Impact Test Procedures-Road Vehicles
SAE J3040_201512 Electric Vehicle (E-Vehicle) Crash Test Lab Safety Guidelines
SAE J3040_202201 Electric Vehicle (E-Vehicle) Crash Test Lab Safety Guidelines
SAE J1766-2014 Recommended Practice for Electric, Fuel Cell and Hybrid Electric Vehicle Crash Integrity Testing
SAE PT-186/2-2018 Collision Reconstruction Methodologies Volume 2: Night Vision Study
SAE R-317-2002 Role of the Seat in Rear Crash Safety
SAE J1733-2007 Sign Convention for Vehicle Crash Testing
SAE J3121-2022 Hydrogen Vehicle Crash Test Lab Safety Guidelines
SAE J175-2023 Wheels - Lateral Impact Test Procedure - Road Vehicles
SAE PT-160-2013 Developments in Modern Racecar Driver Crash Protection and Safety-Engineering Beyond Performance
SAE PT-186/3B-2018 Collision Reconstruction Methodologies Volume 3B: Photogrammetry
SAE J1766_199602 Recommended Practice for Electric and Hybrid Electric Vehicle Battery Systems Crash Integrity Testing
SAE J1828-1996 (R) Uniform Reference and Dimensional Guidelines for Collision Repair
SAE J1828-2006 Uniform Reference and Dimensional Guidelines for Collision Repair

BE-NBN

NBN-ISO 7892:1992 Vertical building elements - Impact resistance tests - Impact bodies and generai test procedures

General Motors do Brasil

GMSA PEP.CPSV.004-1997 Occupant Crash Protection
GMSA PEP.CPSV.002-1997 Occupant Protection in Interior Impact

International Electrotechnical Commission (IEC)

IEC 61721:1995 Susceptibility of a photovoltaic (PV) module to accidental impact damage (resistance to impact test)

The Aluminum Association

AA AT 5-1998 Automotive Aluminum Crash Energy Management Manual

GM North America

GM GM9751P-1988 Side Impact Test

CEN - European Committee for Standardization

EN 1317-3:2010 Road restraint systems - Part 3: Performance classes@ impact test acceptance criteria and test methods for crash cushions

Association Francaise de Normalisation

NF EN 1317-3:2010 Road restraint systems - Part 3: performance classes, crash test acceptance criteria and test methods for crash attenuators
NF S72-408/A2:2006 Impact protection helmets for young children.
NF ISO 6813:1999 Road vehicles - Collision classification - Terminology
XP ENV 1317-4:2002 Road restraint systems - Part 4: performance classes, acceptance criteria for impact tests and methods of testing crash barrier ends and connections
NF R10-214*NF ISO 6813:1999 Road vehicles. Collision classification. Terminology.
NF EN 17076:2020 Tower cranes - Anti-collision systems - Safety requirements
NF S83-202:1995 Watchmaking - Lever escapements - Crashing of the blank

British Standards Institution (BSI)

BS EN 1080:1997 Impact protection helmets for young children
BS EN 1080:2013 Impact protection helmets for young children
BS ISO 6813:1998 Road vehicles - Collision classification - Terminology
BS ISO 7862:2004 Road vehicles. Sled test procedure for the evaluation of restraint systems by simulation of frontal collisions
BS 2011-2.1EB:1977 Environmental testing. Tests-Test Eb. Bump
BS EN 60255-21-2:1989 Electrical relays - Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Shock and bump tests
BS ISO 7141:2005 Road vehicles - Light alloy wheels - Impact test
BS EN 22248:1986 Complete, filled transport packages. Method for determination of resistance to vertical impact by dropping
BS EN 60255-21-2:1996 Electrical relays. Vibration, shock, bump and seismic tests on measuring relays and protection equipment. Shock and bump tests
BS ISO 22839:2013 Intelligent transport systems. Forward vehicle collision mitigation systems. Operation, performance, and verification requirements
BS PD ISO/TR 16158:2013 Space systems. Avoiding collisions with orbiting objects
BS ISO 15623:2013 Intelligent transport systems. Forward vehicle collision warningsystems. Performance requirements and test procedures
BS EN ISO 19953:2004 Footwear - Test methods for heels - Resistance to lateral impact
BS ISO 15829:2004 Road vehicles. Side impact test procedures for the evaluation of occupant interactions with side airbags by pole impact simulation
BS EN 17076:2020+A1:2025 Tower cranes. Anti-collision systems. Safety requirements
BS ISO 19237:2017 Intelligent transport systems. Pedestrian detection and collision mitigation systems (PDCMS). Performance requirements and test procedures
PD ISO/TR 16158:2021 Space systems. Avoiding collisions among orbiting objects
BS ISO 21740:2025 Space systems. Launch window estimation and collision avoidance

International Organization for Standardization (ISO)

ISO 6813:1981 Road vehicles; Collisions; Terminology
ISO/TR 9790:1999 Road vehicles - Anthropomorphic side impact dummy - Lateral impact response requirements to assess the biofidelity of the dummy
ISO 7141:2005 Road vehicles - Light alloy wheels - Impact test
ISO 7141:1995 Passenger cars - Light alloy wheels - Impact test
ISO/TR 9790-1:1989 Road vehicles — Anthropomorphic side impact dummy — Part 1: Lateral head impact response requirements to assess biofidelity of dummy
ISO 3437:1975 Road vehicles; Determination of fuel leakage in the event of a collision
ISO 21740:2025 Space systems — Launch window estimation and collision avoidance

Spanish Association for Standardization (UNE)

UNE 26-403-1990 Motor vehicles. collision. the term
UNE 26403:1990 ROAD VEHICLES. COLLISIONS. TERMINOLOGY.
UNE 95-010-1986 Vibration and collision. Terminology
UNE 56-831-1988 Hard object impact test on door leaf
UNE 22-189-1985 Decorative marble and limestone. Collision resistance
UNE-EN 17076:2021 Tower cranes - Anti-collision systems - Safety requirements
UNE 26247:1983 ROAD VEHICLES. MEASUREMENT OF IMPACT VELOCITY IN COLLISION.
UNE 56-855-1991 Heavy soft object impact test method for hollow doors

Ente Nazionale Italiano di Unificazione

UNI ISO 3784:1981 Road vehicles. Measurement of impact velocity in collision tests.
UNI EN 1317-2:2007 Road restraint systems - Part 2: Performance classes, impact test acceptance criteria and test methods for safety
UNI SPERIMENTALE 9842-3:1991 Road vehicles. Anthropomorphic side impact dummy. Lateral thoracic impact response requirements to assess biofidelity of dummy.
UNI SPERIMENTALE 9842-4:1991 Road vehicles. Anthropomorphic side impact dummy. Lateral shoulder impact response requirements to assess biofidelity of dummy.
UNI 2503:1944 Slip hooks for naval use. Direct- control type.
UNI SPERIMENTALE 9842-5:1991 Road vehicles. Anthropomorphic side impact dummy. Lateral abdominal impact response requirements to assess biofidelity of dummy.
UNI SPERIMENTALE 9842-1:1991 Road vehicles. Anthropomorphic side impact dummy. Lateral head impact response requirements to assess biofidelity of dummy.
UNI SPERIMENTALE 9842-2:1991 Road vehicles. Anthropomorphic side impact dummy. Lateral neck impact response requirements to assess biofidelity of dummy.
UNI EN 1317-2:2000 Road restraint systems - Performance classes, impact test acceptance criteria and test methods for safety barriers
UNI 8602:2005 Storage furnitures - Slam open/close test of doors

European Committee for Standardization (CEN)

EN 1317-3:2000 Road restraint Systems - Part 3: Performance Classes, Impact Test Acceptance Criteria and Test Methods for Crash Cushions
prEN 950-2-1992 Resistance to hard body impact; test method; part 2: door leaves

SE-SIS

SIS SS-ISO 6813:1983 Road vehicles - Collisions - Terminology
SIS SS-ISO 6487:1989 Road vehicles — Measurement techniques in impact tests — Instrumentation
SIS SS-ISO 8721:1989 Road vehicles — Measurement techniques in impact tests — Optical instrumentation

CZ-CSN

CSN 30 0040-1984 Road vehicles - Collisons - Terminology

Lithuanian Standards Office

LST EN 1080-2013 Impact protection helmets for young children

Magyar Szabványügyi Testület

MNOSZ 569-1949 Internal collision impact window panels

BR-ABNT

ABNT CB-47-1980 Vehicle deformation caused by collision

VN-TCVN

TCVN 6445-1998 Road vehicles.Measurement of impact velocity in collision tests

GCC Standardization Organization

GSO ISO/TR 9790:2013 Road vehicles -- Anthropomorphic side impact dummy -- Lateral impact response requirements to assess the biofidelity of the dummy
GSO ISO 6813:2013 Road vehicles -- Collision classification -- Terminology
GSO ISO 7141:2008 Road vehicles - light alloy wheels - impact test
GSO ISO 15623:2015 Intelligent transport systems -- Forward vehicle collision warning systems -- Performance requirements and test procedures
GSO ISO 15829:2013 Road vehicles -- Side impact test procedures for the evaluation of occupant interactions with side airbags by pole impact simulation
GSO ISO 15828:2013 Road vehicles -- Offset frontal impact test procedure
GSO ISO 19237:2022 Intelligent transport systems — Pedestrian detection and collision mitigation systems (PDCMS) — Performance requirements and test procedures

GM Europe

GME B 300 0295-2003 Hydro top coat for crash vehicles (English/German)

FI-SFS

SFS 3531-1976 Metal Crash Test, Charpy U Type
SFS 3642-1978 Paints and varnishes. Hardness impact measurement

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 6813:2013 Road vehicles -- Collision classification -- Terminology
OS GSO ISO 15828:2013 Road vehicles -- Offset frontal impact test procedure

Bureau of Indian Standards

IS 13391-2007 Road Vehicles - Collisions classification - Terminology

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 6813:2016 Road vehicles -- Collision classification -- Terminology
BH GSO ISO/TR 9790:2016 Road vehicles -- Anthropomorphic side impact dummy -- Lateral impact response requirements to assess the biofidelity of the dummy
BH GSO ISO 15623:2017 Intelligent transport systems -- Forward vehicle collision warning systems -- Performance requirements and test procedures
BH GSO ISO 15829:2016 Road vehicles -- Side impact test procedures for the evaluation of occupant interactions with side airbags by pole impact simulation
BH GSO ISO 15828:2016 Road vehicles -- Offset frontal impact test procedure

U.S. Air Force

AIR FORCE JSSG 2010-7 VALID NOTICE 2-2013 Crew Systems Crash Protection Handbook

Swedish Institute for Standards

SS-ISO 6813:1999 Road vehicles - Collision classification - Terminology
SS-EN 17076:2020 Tower cranes - Anti-collision systems - Safety requirements

ITE - Institute of Transportation Engineers

IR-126-E-2008 ITE Collision Reporting Research: Assessing the Collision Data Needs of Transportation Engineers: An ITE Informational Report

Gosstandart of Russia

GOST 25491-1982 Collision avoidance systems. Terms and definitions
GOST R ISO 22839-2017 Intelligent transport systems. Forward vehicle collision mitigation systems. Operation, performance, and verification requirements
GOST R ISO 15623-2017 Intelligent transport systems. Forward vehicle collision warning systems. Performance requirements and test procedures
PNST 463-2020 Intelligent transport systems. Pedestrian detection and collision mitigation systems. Performance requirements and test procedures

TH-TISI

TIS 1669-2008 Road vehicles.light alloy wheels.impact test
TIS 1465-2007 The protection of the driver against the steering mechanism in the event of impact

IN-BIS

IS 951-1977 Functional requirements specification for combined foam and carbon dioxide collision tenders

YU-JUS

JUS N.A5.726-1980 Basic environmental testing procedures. TestEb: Bump

IT-UNI

UNI 6725-1970 Thermal protection lining. Determination of impact resistance of ceramic paint

Standards Norway

NS-EN 17076:2020 Tower cranes - Anti-collision systems - Safety requirements

Danish Standards Foundation

DANSK DS/EN 17076:2020 Tower cranes – Anti-collision systems – Safety requirements

JSAE - Society of Automotive Engineers of Japan@ Inc.

JASO Z103-1983 Frontal Barrier Collision Test Procedure for Passenger Cars

German Institute for Standardization

DIN EN 17076:2021-06 Tower cranes - Anti-collision systems - Safety requirements; German version EN 17076:2020 / Note: To be amended by DIN EN 17076/A1 (2022-11).
DIN EN 17076/A1:2022-11 Tower cranes - Anti-collision systems - Safety requirements; German and English version EN 17076:2020/prA1:2022 / Note: Date of issue 2022-10-14*Intended as an amendment to DIN EN 17076 (2021-06).