Aluminum alloy three point bending

Aluminum alloy three point bending, Total:141 items.

The international standard classification for "Aluminum alloy three point bending" includes: Advanced ceramics , Raw materials and raw glass , Refractories , Other rubber and plastics products , Plastics in general , Paper and board .

The Chinese standard classification for "Aluminum alloy three point bending" includes: Ceramic and glass in general , Fireproof material in general , Other rubber products , Papermaking in general , Special ceramics .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 11546.2-2022 Plastics—Determination of creep behaviour—Part 2:Flexural creep by three-point loading
GB/T 38978-2020 Refractory products—Determination of stress-strain (three-point bending method）
GB/T 23144-2023 Paper and board—Determination of bending stiffness—General principles for two-point|| three-point and four-point methods
GB/T 45763-2025 Fine ceramics—Test method for flexural strength of ceramic thin plates at room temperature—Three-point bending or four-point bending
GB/T 39826-2021 Fine ceramics—Determining flexural bond strength—Four-point bending method
GB/T 34171-2017 Test method for flexural property of thin and ultrathin glass--Three-point bending method
GB/T 22906.6-2008 Testing of cores—Part 6:Determination of bending strength by three-point method
GB/T 33099-2016 Test methods of stiff’ness for dipped reinforcing material一Three-point bending

Professional Standard - Aviation

HB 4-55-1976 Minimum bend radii for steel and aluminum alloy conduit
HB/Z 407.2-2013 Aluminum Alloy Parts Press-bending and Shaping Technology Part 2: Profile Parts
HB 4-55-1983 Minimum bend radii for steel and aluminum alloy conduit
HB/Z 408-2013 Internal pressure push-bending forming process of aluminum alloy tube with small bending radius

Group Standards of the People's Republic of China

T/DYZL 035-2024 Dental zirconia ceramics average strength determination by three point bending method

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 14679:2016 Adhesives -- Measurement of adhesion characteristics by a three-point bending method
BH GSO ISO 21914:2023 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test

Korean Agency for Technology and Standards (KATS)

KS M ISO 14679-2022 Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 14679-2007(2022) Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 14679-2007(2017) Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 14679:2007 Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 5628-2023 Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods
KS M ISO 12986-1-2013 Carbonaceous materials used in the production of aluminium－Prebaked anodes and cathode blocks－Part 1：Determination of bending/shear strength by a three-point method

GCC Standardization Organization

GSO ISO 14679:2015 Adhesives -- Measurement of adhesion characteristics by a three-point bending method
GSO ISO 21914:2022 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test

International Organization for Standardization (ISO)

ISO 14679 Adhesives - Measurement of adhesion characteristics by a three-point bending method
ISO 14679:1997 Adhesives - Measurement of adhesion characteristics by a three-point bending method
ISO 6602:1985 Plastics; Determination of flexural creep by three-point loading
ISO 21914:2019 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
ISO 5628:2019 Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods
ISO/R 398:1964 Bend test for copper and copper alloys
ISO 5628:2012 Paper and board - Determination of bending stiffness - General principles for two-point, three-point and four-point methods

Association Francaise de Normalisation

NF A03-260:1972 ALUMINIUM AND ALUMINIUM ALLOYS. COPPER AND COPPER ALLOYS. ORDINARY BENDING TEST.
NF T51-120-3:1995 Plastics and composites - Determination of flexural fatigue properties - - Part 3: Three-point flexural test on unclamped specimens
NF EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion using the three-point bending method
NF A50-506:1982 Aluminium and aluminium alloys. Cold formed sections produced by cold rolling and by bending. General characteristics.
NF A50-825:1971 Aluminium and aluminium alloys. Cold formed sections obtained by bending. Dimension tolerances.
NF T51-120-4:1995 Plastics and composites - Determination of flexural fatigue properties - Part 4: Four-point flexural test on unclamped specimens
NF Q03-127:2012 Paper and board - Determination of bending stiffness - General principles for two-point, three-point and four-point methods.
NF EN ISO 3327:2009 Hard metals - Determination of bending strength
NF F80-153:1986 RAILWAY EQUIPMENT. COLD FOLDING RADII FOR PLAT PRODUCTS. MINIMUM FOLDING RADII FOR LAQUERED SHEETS OR BANDS MADE OF ALUMINIUM AND ALUMINIUM ALLOYS.
NF T30-010:1992 Paints and varnishes. Evaluation of adhesion or cohesion. Three point bending method.
XP CEN/TS 15963:2014 Bitumens and bituminous binders - Determination of the cracking resistance temperature by a 3-point bending test on a notched bar

British Standards Institution (BSI)

BS EN 2746:1998 Glass fibre reinforced plastics - Flexural test - Three point bend method
BS ISO 11093-7:2011 Paper and board. Testing of cores. Determination of flexural modulus by the three-point method
DD ENV 1966-1996 Structural adhesives. Characterization of a surface by measuring adhesion by means of the three point bending method
BS ISO 5628:2012 Paper and board. Determination of bending stiffness. General principles for two-point, three-point and four-point methods
BS EN ISO 899-2:2024 Plastics. Determination of creep behaviour - Flexural creep by three-point loading
BS ISO 11093-7:1997 Paper and board. Testing of cores-Determination of flexural modulus by the three-point method
BS ISO 11093-6:1996 Paper and board. Testing of cores-Determination of bending strength by the three-point method
BS EN ISO 899-2:2003+A1:2015 Plastics. Determination of creep behaviour. Flexural creep by three-point loading
BS EN ISO 899-2:1997 Plastics. Determination of creep behaviour-Flexural creep by three-point loading
08/30180281 DC BS EN 1966. Structural adhesives. Characterization of a surface by measuring adhesion by means of the three point bending method
BS ISO 11093-6:2005 Paper and board. Testing of cores - Determination of bending strength by the three-point method
BS ISO 5628:2019 Paper and board. Determination of bending stiffness. General principles for two-point, three-point and four-point methods
BS EN 910:1996 Destructive tests on welds in metallic materials - Bend tests

Finnish Standards Institute

SFS-ISO 6602 E:1986 This standard is approved in English
SFS 3890-1977 Anodizing of aluminum and its alloys. Flexibility test

Engineering Sciences Data Unit (ESDU)

FAT E.07.01 B-1993 Endurance of aluminium alloys (unclad) (in bending).

German Institute for Standardization

DIN EN 2746:1998-10 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN 65207:1987-11 Aerospace; tolerances for wrougth aluminium alloy folded profiles (sections)
DIN EN 1966 E:2008-07 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method
DIN EN 1966:2003 Structural adhesives — Characterization of a surface by measuring adhesion by means of the three point bending method
DIN EN 1966:2009-07 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method; German version EN 1966:2009
DIN EN 1966 E:2008 Draft Document - Structural adhesives - Characterisation of a surface by measuring adhesion by means of the three point bending method; German version prEN 1966:2008
DIN 51902:1997 Testing of carbon materials - Determination of flexural strength by three point method - Solid matters
DIN 5520:2002 Semiproducts for rail vehicles - Bending radii for sheet and strip material of aluminium and wrought aluminium alloys
DIN 5520:1983 Semiproducts for rail vehicles - Bending radii for sheet and strip material of aluminium and wrought aluminium alloys
DIN 5520:2002-07 Semiproducts for rail vehicles - Bending radii for sheet and strip material of aluminium and wrought aluminium alloys
DIN EN 63:1977 Determination of flexural properties of glass fiber reinforced plastics - Three-point method
DIN 53293:1982-02 Testing of sandwiches; Bending test
DIN 51902:2009-05 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998

Standards Norway

NS-EN 2746:1998 Aerospace series — Glass fibre reinforced plastics — Flexural test — Three point bend method
NS-EN 1966:2009 Structural adhesives — Characterization of a surface by measuring adhesion by means of the three point bending method
NS-EN 1966:2002 Structural adhesives — Characterisation of a surface by measuring adhesion by means of the three point bending method
SN-CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen

German Welding Society

DVS 3101-2:1999-05 Mechanical testing of ceramic-metal joints - Four-point bending test

Japanese Industrial Standards Committee (JISC)

JIS Z 3147:2017 High-speed rotating bar bending fatigue testing of aluminium alloys and magnesium alloys

American Society for Testing and Materials (ASTM)

ASTM D5023-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-23 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-01 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D8058-19 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D8058-23 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D5023-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D8058-24 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM RR-E37-1032 2003 E2092-Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D8058-17 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM E2092-03 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-04 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18a Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-00 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D8058-17e1 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test

American National Standards Institute （ANSI)

ANSI/ASAE S459-1992(2017) Shear and Three-Point Bending Test ofAnimal Bone
ANSI/ASAE S459-1993 Shear and Three-Point Bending Test of Animal Bones
ANSI/ASTM D5023:2001 Test Method for Measuring the Dynamic Mechanical Properties of Plastics Using Three Point Bending (08.03)
ANSI/TAPPI T836 om-2013 Bending stiffness, four point method

Spanish Association for Standardization (UNE)

UNE-EN 2746:1999 AEROSPACE SERIES. GLASS FIBRE REINFORCED PLASTICS. FLEXURAL TEST. THREE POINT BEND METHOD.
UNE-EN 1966:2003 Structural adhesives - Characterisation of a surface by measuring adhesion by means of the three point bending method.
UNE-EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method

European Committee for Standardization (CEN)

EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method
EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
DD ENV 1966-1995 Structural Adhesives - Characterization of a Surface by a Measuring Adhesion by Means of the Three Point Bending Method
EN 63:1977 Glass Reinforced Plastics: Determination of Flexural Properties; Three Point Method

Gosstandart of Russia

GOST 34368.2-2017 Plastics. Method of determination of flexural creep by three-point loading
GOST 14019-2003 Metallic materials. Bend test method
GOST 14019-1980 Metals. Methods of bend tests

Lithuanian Standards Office

LST EN 2746-2001 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
LST EN 1966-2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method

Danish Standards Foundation

DS/EN 2746:1999 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
DANSK DS/EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
DS/EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method
DANSK DS/EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method

United States Navy

NAVY MIL-C-6136 A-1965 CONDUIT: ELECTRICAL, FLEXIBLE, SHIELDED, ALUMINUM ALLOY FOR AIRCRAFT INSTALLATIONS [Refer To: SAE AS 6136]
NAVY MIL-C-6136 A (2)-1970 CONDUIT: ELECTRICAL, FLEXIBLE, SHIELDED, ALUMINUM ALLOY FOR AIRCRAFT INSTALLATIONS [Refer To: SAE AS 6136]
NAVY MIL-C-6136 A NOTICE 2-1998 CONDUIT: ELECTRICAL, FLEXIBLE, SHIELDED, ALUMINUM ALLOY FOR AIRCRAFT INSTALLATIONS [Refer To: SAE AS 6136]

Ente Nazionale Italiano di Unificazione

UNI 7453-1975 Aluminum and aluminum alloy head-to-head welding casing with thickness up to 50mm. Bending test
UNI EN 1966:2004 Structural adhesives - Characterisation of a surface by measuring adhesion by means of the three point bending method
UNI EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method
UNI EN 63:1978 Glass reinforced plastics. Determination of flexural properties. Three point method.
UNI EN ISO 899-2:1998 Plastics - Determination of creep behaviour - Flexural creep by three- point loading
UNI ISO 5628:2020 Paper and board - Determination of bending stiffness - General principles for two-point, three-point and four-point methods
UNI EN 2746:1999 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
UNI CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen

Austrian Standards

ONORM EN 63-1979 Glass reinforced plastics. Determination of flexural properties. Three point method.

Aerospace, Security and Defence Industries Association of Europe (ASD)

PREN 2746-1990 Aerospace Series Glass Fibre Reinforced Plastics Determination of Flexural Properties Three Point Bend Method (Issue P 1)

Swiss Association for Standardization (SNV)

SNV 10120-1943 Anodizing of aluminum and aluminum alloys. Bending stress of oxide layer in sulfuric acid solution

Society of Automotive Engineers (SAE)

ADS AS43133 Elbow - 135° (Aluminium Alloy)
ADS AS43180 Elbow - 90° (Aluminium Alloy)
SAE AS43133-1 AS43133 Elbow-135° (Aluminium Alloy)
SAE AS43180-1 AS43180 Elbow-90° (Aluminium Alloy)
ADS AS43142 Elbow - 135° - Bulkhead (Aluminium Alloy)
ADS AS43184 Elbow - 90° - Bulkhead (Aluminium Alloy)
SAE AS43184-1 AS43184 Elbow-90°-Bulkhead (Aluminium Alloy)
SAE AS43142-1 AS43142 Elbow-135°-Bulkhead (Aluminium Alloy)

European Association of Aerospace Industries

AECMA PREN 3071-1997 Aerospace Series Straight Bending of Sheets and Strips in Aluminium and Aluminium Alloys Dimensioning Methods and Calculations of Developed Lengths Edition 1

GM North America

GM GMP.E/P.039-2003 Polyolefin Alloy 700 MPa Flexural Modulus
GM GMP.E/P.049-1992 Polyolefin Alloy - 375 MPa Flexural Modulus
GM GMP.E/P.074-1996 Polyolefin Alloy - 800 MPa Flexural Modulus
GMP.E/P.039-2003 Polyolefin Alloy - 700 MPa Flexural Modulus Revision B

Swedish Institute for Standards

SS-ISO 5628:2012 Paper and board - Determination of bending stiffness - General principles for two-point, three-point and four-point methods

Bureau of Indian Standards

IS 3260-1965 Method For Bend Test For Copper And Copper Alloys